37BV700B
37BV700B
〰彍䈳㕟孇䉝彃佖䕒弨䥂彉乔䕒久吩弱〰㜰㠴
〱⁋慳ﵭ′〱〠偡穡牴敳椠ㄵ㨴㐺㐹
OWNER’S MANUAL
Contents
Safety Precautions ...................................... 3
Air Circulation ......................................... 3
Heat Damage.......................................... 3
Mains Supply .......................................... 3
Warning ................................................ 3
Do ......................................................... 3
Do not .................................................... 3
Installation and Important Information ........ 4
EXCLUSION CLAUSE ................................ 4
Digital Switchover....................................... 5
Inserting Batteries and Effective Range of
the Remote Control ................................. 6
To Connect an HDMI Device ..................... 8
To Connect a DVI Device ......................... 8
To Connect a Computer ........................... 8
To Connect a USB Disk ............................ 9
USB Memory Connection ......................... 9
Environmental Information ................... 10
Using the Cable Holder .......................... 10
Switching on ......................................... 11
Using the Remote Control ...................... 11
Using the Controls and Connections on the
TV........................................................ 11
Auto Tuning .......................................... 13
Digital Manual Tuning ............................ 14
Analogue Manual Tuning ........................ 14
APS (Automatic Programming System) .... 15
Sorting Programme Positions - Analogue .15
Stereo and Bilingual Transmissions ......... 16
Viewing Channel List ............................. 16
Moving a Channel ................................. 16
Deleting a Channel ................................ 16
Renaming a Channel ............................. 17
Locking a Channel ................................. 17
Viewing Info Banner .............................. 17
Electronic Programme Guide .................. 17
Programme Searching ........................... 18
Displaying Subtitles ............................... 18
Language Settings................................. 18
Preferred ........................................... 18
Current ............................................. 18
Viewing Parental Control Menu ............... 19
Menu Lock ............................................ 19
Set PIN ................................................ 19
Viewing Confi guration Menu ................... 20
Dolby D Audio (* for EU countries only) .. 20
Hard of Hearing (* for EU countries only) 20
Controlling Favourite Mode .................... 20
Channel List Mode ................................. 20
English - 1 -
Active Antenna ...................................... 20
Scan Encrypted .................................... 20
Receiver Upgrade .................................. 20
Note on Analogue switch-off .................. 20
Audio Description (optional) ................... 21
Standby Search (*) ............................... 21
Viewing Main Menu ............................... 21
Selecting Programme Positions ............... 21
Input Selection ..................................... 21
Controlling Volume and Muting Sound .... 22
Equalizer Settings .................................. 22
Balance ................................................ 22
Headphone Volume ............................... 22
Sound Mode ........................................ 22
AVL ...................................................... 22
Picture Mode......................................... 23
Picture Adjustments .............................. 23
Colour Temperature ............................... 23
Noise Reduction .................................... 23
Film Mode ............................................ 23
Game Mode .......................................... 23
Picture Zoom ........................................ 23
Resetting Picture Settings ...................... 23
Quick Access to PIP/PAP Mode ............... 25
Using PIP/PAP MENU ............................. 25
Child Lock ............................................. 26
Default Zoom ........................................ 26
Blue Background ................................... 26
Menu Background ................................. 26
Backlight .............................................. 26
Menu Timeout ...................................... 26
HDMI PC Full Mode (optional) ................ 26
Full Mode (optional) .............................. 26
TXT Language ...................................... 26
Programme Timers - Digital Only ............ 27
Sleep Timer - Analogue ......................... 27
Conditional Access ................................ 27
Manual Start ......................................... 28
Auto Start ............................................. 28
Playing MP3 Files .................................. 28
Viewing JPG Files .................................. 28
Slideshow Feature ................................. 29
Video Playback ...................................... 29
To Close the Media Player ...................... 29
Autoposition ......................................... 30
H Position ............................................. 30
V Position ............................................. 30
Dot Clock .............................................. 30
Phase ................................................... 30
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 100_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 1 02.12.2010 11:02:5502.12.2010 11:02:55
Dot Clock .......................................... 30
PC Picture controls ................................ 30
Digital Text and Interactive Services ....... 31
Using Digital Interactive Services ............ 31
Analogue Text Services (if available) ....... 31
Using Text Button - .......................... 31
Acessing Sub-Pages ............................... 31
Revealing Concealed Text ...................... 31
Holding a Page..................................... 31
Enlarging the Text Display Size ............... 31
Appendix A: PC Input Typical Display Modes 32
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) ................................. 33
Appendix C: Supported File Formats for USB
Mode ....................................................... 34
Appendix D: PIN Information ................ 34
Appendix E: PIP/PAP Mode Combinations ... 35
Specifi cations and Accessories ................... 36
License Information .................................. 37
English - 2 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 200_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 2 02.12.2010 11:02:5602.12.2010 11:02:56
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own
safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply
to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the television to
allow adequate ventilation. This will prevent overheating
and possible damage to the television. Dusty places should
also be avoided.
Heat Damage
Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity, or locations where the temperature
is likely to fall below 5°C (41°F).
Mains Supply
The set should be operated only from a 220-240 V AC 50 Hz
outlet. DO ensure that the television is not standing on the
mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the
removal of which will impair its performance. In the UK, the
fuse fi tted in this plug is approved by ASTA or BSI to BS1362.
It should only be replaced by a correctly rated and approved
type and the fuse cover must be refi tted. IF IN DOUBT
PLEASE CONSULT A COMPETENT ELECTRICIAN.
Warning
To prevent the spread of fire, keep
candles or other open fl ames away from
this product at all times.
Do
DO read the operating instructions before you attempt to
use the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and inter connections between pieces
of equipment) are properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw the mains
plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
Do not
DON’T remove any fi xed cover as this may expose danger-
ous voltages.
DON’T obstruct the ventilation openings of the equipment
with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the
equipment.
DON’T allow electrical equipment to be exposed to dripping
or splashing or objects fi lled with liquids, such as vases, to
be placed on the equipment.
DON’T place hot objects or naked fl ame sources, such as
lighted candles or nightlights on, or close to equipment. High
temperatures can melt plastic and lead to fi res.
DON’T use makeshift stands and NEVER fi x legs with wood
screws. To ensure complete safety, always fi t the manufactur-
ers’ approved stand, bracket or legs with the fi xings provided
according to the instructions.
DON’T leave equipment switched on when it is unattended,
unless it is specifi cally stated that it is designed for unat-
tended operation or has a standby mode. Switch off by
withdrawing the plug, make sure your family know how to do
this. Special arrangements may need to be made for people
with disabilities.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or it is damaged in any way switch off, withdraw the mains plug and consult your dealer.
WARNING - excessive sound pressure from earphones or
headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially children,
push or hit the screen, push anything into holes, slots
or any other openings in the case.
NEVER guess or take chances with electrical equipment
of any kind - it is better to be safe than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
English - 3 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 300_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 3 02.12.2010 11:02:5602.12.2010 11:02:56
Installation and Important Information
Where to install
P Clip
Fixing
Sturdy tie
(as short
as possible)
''P' Clip position on TV is dependent on model
Strap
* Button and stand style is dependent on model.
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen.
Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and prevent it
falling over, secure the TV to a wall using a sturdy tie to the
clip on the back of the TV.
The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes
some parts of the screen may be missing picture elements
or have luminous spots. This is not a sign of a malfunction.
Interactive video games that involve shooting a “gun” type of
joystick at an on-screen target may not work with this TV.
Make sure the television is located in a position where it cannot
be pushed or hit by objects, as pressure will break or damage
the screen. Also, please be certain that small items cannot be
inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a
soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this
may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section
of the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available.
Reception of future additional or modifi ed services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identifi cation logos, computer
displays, video games, on screen menus, etc. are left on the television screen for any length of time, they could
become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fi re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the
owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following, loss of profi t, interruption of business, the loss of recorded data whether caused during normal opera-
tion or misuse of the product.
Note: A Toshiba wall bracket or stand, where available, must be used.
Fixing
Strap
English - 4 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 400_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 4 02.12.2010 11:02:5602.12.2010 11:02:56
Digital Switchover
8IFOEPFTTXJUDIPWFSIBQQFO
$PQFMBOETXJUDIFTPO0DUPCFS
5IFFYBDUEBUFZPV
TXJUDIEFQFOETPOUIF
USBOTNJUUFSZPVBSF
TFSWFECZ5PDIFDL
XIFOZPVTXJUDI
HPUP%JHJUBM6, µT
QPTUDPEFDIFDLFSPO
XXXEJHJUBMVLDPVL
$IFDLZPVS*57OFXT
TFSWJDFPSMPPLBU5FMFUFYU
QBHFUPTFFXIBU57
SFHJPOZPVµSFJO
Television in the UK is going digital, bringing us all
more choice and new services. Starting in late 2007
and ending in 2012, television services in the UK will
go completely digital, TV region by TV region.
Please see above to fi nd out when your area switches
to digital. Digital UK is the independent, non-profi t
organisation leading the process of digital TV
switchover in the UK.
Digital UK provides impartial information on what
people need to do to prepare for the move to digital,
and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means
it is ready to receive the Freeview signal by simply
plugging it into your aerial socket (check if you can
get digital TV through your aerial now, or whether
you’ll have to wait until switchover, at www.digitaluk.
co.uk).
When the TV switchover happens in your area, there
are at least two occasions when you will need to
re-tune your TV in order to continue receiving your
existing TV channels, and also to pick up new ones,
Digital UK, the body leading the digital TV switchover,
will advise you when you need to re-tune during the
switchover.
If you choose to connect your TV to satellite or
cable with a digital box then it will not be affected by
English - 5 -
,FFQUIJTJNQPSUBOU
JOGPSNBUJPOBCPVU
IPXUPSFUVOF
ZPVS57EVSJOHUIF
EJHJUBM57TXJUDIPWFS
switchover, and you won’t need to re-tune. Keep this
important information about how to re-tune your TV
during the digitalTV switchover
How to re-tune:
As new services are broadcast it will be necessary to
re-tune the television in order to view them. Auto tuning
will completely retune the television and can be used
to update the channel list.
Press • MENU button on the remote control unit.
Select • SETUP and then INSTALLATION option.
Select Automatic Search.
A screen will appear warning that previous digital •
programmes and settings will be deleted.
You must allow the television to complete the •
search...
When the search is complete the Auto tuning screen •
will display the total number of service found.
NOTE: Further detailed instructions on Auto tuning
can be found in the TV owners manual.
If you are missing channels, it may be that they are
not available in your area, or that your aerial needs
upgrading.
If you have any further questions, please contact your
equipment supplier or call Digital UK on 08456 50 50
50 or visit www.digitaluk.co.uk
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 500_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 5 02.12.2010 11:02:5702.12.2010 11:02:57
Simple at-a-glance reference of your remote control.
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
BACK
MENU
EPG
FAV
SOURCE
PRESETS
SLEEP
?
INFO
+
+
-
-
V
OK
Mono-Stereo / Dual I-II
Expand (in TXT mode)
Image size
Digital Services
Green button
The Remote Control
SCREEN
LANG
SUBTTL
PIP
Standby mode
Subtitle on/off
PIP/PAP Mode
No function
Current language selection
To select TV
programme number
eletext / Mix / PAT
T
Return / Exit menu
Navigation buttons
Programme guide
Reveal (in TXT mode)
To change channels
Info
AV / Source
BACK
EPG
SOURCE
MENU
OK
FAV
INFO
PRESETS
SLEEP
V
P
To return to
the previous programme
Menu on/off
OK / Confirm
Freeze picture (in analoge TV mode)
Hold (in TXT mode)
Favourite mode
Picture mode selection
Display sleep timer
To alter the volume
To mute the sound
TOSHIBA
RC-3910
Inserting Batteries and Effective Range of the Remote Control
Remove the back cover to reveal the battery compartment and make sure the batteries are
inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead bat-
+
-
-
+
teries immediately to prevent acid from leaking into the battery compartment. Dispose of them
in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
The performance of the remote control will deteriorate beyond a distance of fi ve metres or
outside an angle of 30 degrees from the centre of the television. If the operating range becomes
reduced the batteries may need replacing.
English - 6 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 600_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 6 02.12.2010 11:02:5802.12.2010 11:02:58
Connecting External Equipment
Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the
Cable Holder Input
Audio
Line Out
SPDIF
Optic Out
Subwoofer
Out
Scart
Socket 2
Scart
Socket 1
* a decoder
could be Digital
Satellite, Free to
Air or any other
compatible
decoder.
TV
decoder*
Component Video
Inputs
Audio
Inputs
wall socket.
SPDIFF
Coaxial Out
HDMI Input
Sockets
PC VGA
Input
Aerial
Input
Side View
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM).
USB Input
Side HDMI
Headphone
Side Video Input
Side AV Audio Inputs
On/Off Switch
Aerial cable:...........................................................
Connect the aerial to the socket on the rear of the
television.
SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that
the scart cable is connected to the television.
Before running fi rst time installation, any connected devices
to standy mode.
The phono sockets located on the side of the TV will accept
L and R audio signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected to the
television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press SOURCE button to switch between sources.
The Coaxial Audio Output and Optic Audio Out socket enables
the connection of a suitable surround sound system.
HDMI® (High-Defi nition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-defi nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
English - 7 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 700_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 7 02.12.2010 11:02:5802.12.2010 11:02:58
Connecting an HDMI® or DVI Device to the HDMI
Input
The HDMI input on your television receives digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV.
• Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI terminal. For proper operation, it is recommended that you use
an HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz,
you will need a Category 2 cable. Conventional HDMI/DVI
cable may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
• To view the HDMI device video, press the SOURCE button
to select HDMI 1, HDMI 2, HDMI 3 or HDMI 4.
HDMI Input
HDMI3
HDMI Input
Sockets
(Back)
HDMI2
HDMI1
Socket
(Side)
HDMI4
To Connect a DVI Device
Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI terminal and audio cables to the PC/Side
AV/YPbPr sockets (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only. Separate
analogue audio cables are required.
PC/Component
HDMI Input
Sockets
HDMI to DVI
Adapter Cable
(not supplied)
Audio Inputs
Audio cable for HDMI to
television connection
(not supplied)
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television fi rst, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device fi rst, and then the television.
To Connect a Computer
With either an RGB/PC or an HDMI connection, you can watch
your computer’s display on the television and hear the sound
from the television’s speakers.
HDMI device
English - 8 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 800_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 8 02.12.2010 11:03:0202.12.2010 11:03:02
Connecting a
Connecting a USB
Computer
When connecting a PC to the RGB/PC terminal on thetelevision, use an analogue RGB (15-pin) computer cable anda
PC audio cable for the AUDIO socket.
RGB PC Cable
(not supplied)
or
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. To display the optimum
picture, use the PC setting feature.
NOTE:
The PC audio input terminal on the television is •
shared with the YPbPr terminal.
Some PC models cannot be connected to this •
television. An adaptor is not needed for computers
with a compatible mini D-sub15-pin terminal.
Depending on the DVD’s title and the specifi cations •
of the PC on which you are playing the DVD-Video,
some scenes may be skipped or you may not be
able to pause during multiangle scenes.
Audio cable for PC to
television connection
(not supplied)
Disk
To Connect a USB Disk
You can connect a USB disk to your TV by using •
the USB input of the TV. This feature allows you to
display/play music, photo or video fi les stored in a
USB stick.
It is possible that certain types of USB devices (e.g. •
MP3 Players) may not be compatible with this TV.
You may back up your fi les before making any •
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.
The TV supports only FAT32 disk formatting. NTFS •
format is not supported. If you connect a USB disk
with NTFS format, “usb is unformatted” osd will
be displayed.
Do not pull out USB module while playing a fi le.•
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the drive.
This may cause physical damage to the USB player
and especially the USB device itself .
USB Memory Connection
Plug your USB device to the USB input of the TV. •
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported.
SIDE VIEW USB MEMORY
English - 9 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 900_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 9 02.12.2010 11:03:0402.12.2010 11:03:04
Power Save Mode and Cable Holder
Environmental Information
This television is designed to consume less energy to save environment. •
You not only help to save the environment but also you can save money by reducing electricity bills thanks •
to the energy effi ciency feature of this TV. To reduce energy consumption, you should take the following
steps:
You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, •
the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce •
energy consumption.
Disconnect power when going away for longer time.•
Note that annually, using the TV set in Power Save Mode has more power effi ciency than disconnecting •
the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains
plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode
setting to reduce your annual power consumption.
Please helps us to save environment by following these steps.•
Repair Information
Please refer all servicing to qualifi ed personnel. Only qualifi ed personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
Using the Cable Holder
You can use the supplied cable holder as the following:
Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.•
Place cables into the cable holder after all necessary connections are made.•
English - 10 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 1000_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 10 02.12.2010 11:03:0602.12.2010 11:03:06
Controlling the TV
p
p
A wide variety of external equipment can be connected via the sockets located on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the right side of the television may be used for some functions.
On/Off
Switch
Standby LED
Menu OSD
Volume
Down/U
Switching on
If the standby LED is unlit, check that the mains plug is con-
nected to the power and press the
side of the television to switch the television on. Then the LED
lights up blue. If the picture does not appear, press on
the remote control; it may take a few moments.
To put the television into Standby, press
control. To view the television, press again. The picture may take a few seconds to appear. Note: The active
Standby LED may appear for a few moments when the TV
is switched off.
button on the left
on the remote
Note: A beeping sound will be heard when the buttons
are pressed. This is normal operation, not a fault.
For energy saving:
Turning the television off at its mains supply, or un-plugging it, will cut energy
use to nearly zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use. Energy
effi ciency cuts energy consumption and thus saves money by reducing
electricity bills.
NOTE: Putting the television into standby mode, will reduce energy
consumption, but will still draw some power.
Programme
Down/U
AV/
Source
Standby
Using the Remote Control
Press the MENU button on the remote control to see the
menus.
In analogue TV mode the menu appears as a group of
icons each for a menu option. Press the Left or Right button
to select a topic.
In digital TV mode the menu appears as a list. Press the Up
or Down button to select a topic.
To use the options press the Up and Down buttons on the
remote control to move up and down through them and OK,
Left or Right buttons to select the required choice. Follow
the on screen instructions. The functions of each menu are
described in detail throughout the manual.
Using the Controls and Connections on the TV
Using the control buttons on the front of the TV:
• To alter the volume press + -.
• To alter the programme position press - P/CH + on the right
side of the TV.
• Press +
use - P/CH + to navigate and +
NOTE: The USB socket has limited functionality, and Toshiba
can take no responsibility for damage to other connected
equipment.
To select an external input, press SOURCE until the appropriate input source is selected.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
- buttons at the same to view main menu and
- to change value.
English - 11 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 1100_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 11 02.12.2010 11:03:0702.12.2010 11:03:07
Initial Installation - Digital & Analogue
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected to your television. To set up the television use the buttons on the remote
control as detailed on page 4.
Connect the mains plug and switch the TV into 1.
standby using the side On/Off switch. Press
any numbered or standby button on the remote
control, then the language selection menu will be
displayed. This screen will appear the fi rst time
that the television is switched on and each time
the television is reset.
By pressing the 2. Up or Down buttons highlight the
language you want to set and press OK button.
Afterwards, active antenna selection menu screen 3.
is displayed. You can set active antenna mode as
on or off by using Left or Right buttons.
If an active antenna is connected to your TV, you
can select this option as On. Antenna power should
be Off when standard antenna is used instead of
the active antenna. See Confi guration Menu in the
following sections for more information.
Press 4. OK button to save active antenna
preference. Afterwards, the following message will
be displayed on the screen:
Select Yes by using 5. Left or Right buttons and
press OK to continue. The Auto tuning screen
will appear and the television will start to search
for available stations. The progress bar will move
along the line. You must allow the television to
complete the search.
After Automatic Search is completed, the following 6.
message asking for analogue channel search
appears on the screen. Select Yes by using Left
or Right buttons and press OK to continue.
Note :
For proper functioning of digital teletext in DTV •
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing fi rst time •
installation.
Select your Country, Language and Text language 7.
by using navigation buttons. Press OK or RED
button to continue. To cancel, press the BLUE
button.
English - 12 -
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 1200_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 12 02.12.2010 11:03:0702.12.2010 11:03:07
Loading...