Telefunken TF-1709 User Manual [ru]

RADIO WITH ALARM
РАДИОПРИЕМНИК С БУДИЛЬНИКОМ

TF-1709

Instruction manual

Руководство по
эксплуатации

Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

Part A- LED display description

A1: display TIME or FM radio frequency

A2: ALARM1 icon “ ”

A3: ALARM2 icon “ ”

A4: SNOOZE icon “ ”

A5: RADIO icon “ ”

A6: SLEEP icon “ ”

Part B – Control elements description

B1: Buttons

B2: Display

B3: Projection

B4: Speaker

B5: Battery compartment

B6: Power supply socket

2

Instruction manual

Important safeguards

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.

• Do not hit or drop the unit

•

Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.

• Do not disassemble the unit yourselves

Refer servicing to qualified service personnel

All the illustrations in this manual are
schematic images, which may differ from
actual objects.

Power supply

Battery operation

• Insert 1 x 3.0 V lithium battery CR2032
(included) to the terminal inside the battery
compartment
and -). Your set will not work normally from the
battery supply, but there is now the advantage
that, in case of a mains current failure or power
outage, your clock will continue to work. The
clock display will not light up, the clock time
and alarm setting will be held in the clock
memory by the battery back-up system.

This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to be
used for short-term power failures. For longer
durations the battery may become exhausted or
there may be some deviation in accuracy.

• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are reconnected and
you must re-set the clock.

according to the polarity marks (+

DC operation

• The appliance is for household use only.

• Before the first connecting of the appliance
check that the voltage indicated on the rating
label corresponds to the mains voltage in your
location.

• Insert the cord of the power adaptor to

the DC IN jack of the unit.

• Insert the plug into the electrical outlet.

• The set is now working as an electronic
clock.

General operation

Backlight brightness

• Press the
between the levels of display backlight
brightness
completely

or to disable the display

.

button to select

Setting the clock

• Press and hold the SET button.
The time will start to flash.

• Press the ▲ and ▼ buttons
to set the hour. Press the SET button after
the hour is set.

• Press the ▲ and ▼ buttons
to set the minutes. Press the SET button
after the minute is set.

• Choose the 12- or 24-hour format.
Press the ▲ and ▼ buttons to select, SET to
confirm. The time is now set.

• You can press and hold the ▲ and ▼ during
the setting to speed up the process.

Setting the alarm

• Press and hold the AL1-2 button to
start the setting of the 1st alarm.

• Press the ▲ and ▼ buttons
to set the hour. Press the AL1-2 button
after the hour is set.

• Press the ▲ and ▼ buttons

to set the minutes. Press the AL1-2
button after the minute is set.

3

Instruction Manual

• Press the ▲ and ▼ buttons
to select the alarm signal. "ON"
means the radio will be selected as
the alarm signal, "OFF" - the default
buzzer sound. Press the AL1-2 to
confirm your choice.

• Press the ▲ and ▼ buttons
to set the alarm volume. The default
volume level is L08. Press the
AL1-2 to confirm.

• Press the ▲ and ▼ buttons
to set the alarm snooze time. The
default time is 5 minutes. Press the
AL1-2 to confirm. Alarm Clock 1 is
now set.

• Alarm Clock 2 is set the same

way as Alarm Clock 1.

Alarm activation

• To activate or deactivate the
daily alarms, briefly press the AL1-2
button.

- Press once: Alarm 1 activated

- Press twice: Alarm 2 activated

- Press 3 times: Both alarms activated

- Press 4 times: Both alarms

deactivated

Snooze and stopping the alarm

• When the alarm time comes,
press the button to go to snooze
mode. The alarm signal will stop
ringing for 5 minutes (by default).

• If buzzer is selected as the alarm
signal, press any button except
to stop the alarm.

• If radio is selected as the alarm
signal, press the AL1-2 button to stop
the alarm.

FM radio

• Press the RADIO/SLEEP button
to turn on the radio, radio icon will
appear on the display. The last played
station will start to play.

• When the radio is first turned
on, it will automatically scan the
frequency range and save all stations
with a strong signal. After the scan is
complete, the first station will start to
play. You can re-scan at any time by
pressing and holding the ▲ and ▼
buttons.

• Press the SET button to switch
between saved radio stations.

• Press the ▲ and ▼ buttons
to manually adjust the frequency to 0.1
MHz

. You can also press and hold the
either button to perform a single
automatic search of the next or
previous station.

• If you want to save a manually
found frequency, press and hold SET,
then use the ▲ and ▼ buttons to select
the preset channel and press SET to
confirm.

• To adjust volume, press the
VOL button and then use the ▲ and ▼
buttons to increase or decrease the
volume level. There are 16 levels in
total.

• Press the button to switch
the radio off.

Sleep function

• In radio mode press the
RADIO/SLEEP button to turn on sleep
mode. The default sleep time will appear
on the display. Press this button
repeatedly to select the sleep time
period or to switch it off. The radio will
turn off automatically after the sleep
time period elapses.

4