Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
Not indicated: ON/OFF switch, DC 5V
adapter socket, USB port, TF (microSD)
card slot, AUX input. All the terminals are
located on the back of the unit.
MODE
SLEEP
DIMMER
SNOOZE
DIMMER
MODE
Press to turn the unit on. Press and hold for 2 sec to turn it off. Press and hold
for 5 sec to reset the unit.
Press to pause/resume playback in Bluetooth/AUX/USB modes. When having
an incoming call on the paired smartphone, press shortly to answer it, press
and hold to decline. Promptly press twice to redial the last phone number. In
FM mode, press to switch the saved stations.
Press to select MODE. In FM mode press and hold to automatically search
and save available radio stations. In Time mode press and hold to set the time.
Press to go to previous track, press and hold to decrease volume. Time mode:
switch between 12- and 24-hour formats. FM mode: scan radio frequency 0.1
MHz backwards.
Press to go to next track, press and hold to increase volume. Time mode:
switch between 12- and 24-hour formats. FM mode: scan radio frequency 0.1
MHz forwards.
Press to turn Alarm clock 1 on and off. Press and hold to set Alarm clock 1.
Press to turn Alarm clock 2 on and off. Press and hold to set Alarm clock 2.
Press to select sleep countdown time.
Press to select display backlight brightness.
Press to delay the alarm for 10 minutes when it goes off.
SNOOZE
SLEEP
2
Instruction manual
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
•
Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
• The unit operates on an internal
rechargeable Li-ion battery.
• The battery can be recharged with the
provided USB charging cable. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds
to the mains voltage in your home.
• Insert the charging cable into the
DC 5V socket at the top panel of the unit.
• Connect the charging cable to the power
source. The unit is charging when the red
LED indicator is on. When the red light
turns green, the unit is fully charged.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
• Put the OFF/ON switch into ON
position to switch the unit on. Put it into OFF
position to switch off. The clock and alarm
will still work but the display and mood light
are off.
General operation
Setting the clock
• Shortly press or
to switch between 12- and 24-hour
formats.
• Press and hold the MODE button.
The time will start to flash.
• Press or
to set the hour. Press the MODE button
after the hour is set.
• Press or
to set the minutes. Press the MODE button
after the minute is set. The clock is set.
Setting the alarm
• Press and hold to set the
time of Alarm 1. Press or to set
the hour, to confirm. The minutes are
set in the same way.
• After you set the alarm time,
press to turn it on. The alarm icon will
appear on the display. Press again to turn the alarm off.
• When the alarm time comes,
the signal will ring for 2 minutes and repeat
every 10 minutes for the total of 6 times.
Press SNOOZE to delay the alarm for
another 10 minutes. Press to turn off the
alarm.
• Alarm 2 is set in the same way
as Alarm 1, the button is used instead.
3
Instruction Manual
Bluetooth operation
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
10 meters.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press MODE to go
to the Bluetooth mode.
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-1705UB).
• If asked for a passcode, enter “0000”.
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• The display icon will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
the button to pause and resume
playback.
• Press or to go to a
previous or next track. Press and holdthose buttons to decrease or increase
volume, respectively.
AUX input
• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use an audio cable with 3.5mm-to-3.5
mm plugs to connect the headphone out or
audio line-out of the external device to the
AUX input of this unit.
• Press the MODE button to go to the AUX
mode. The AUX icon will light
up on the display.
• Turn on the external device. You can
press and hold or
to adjust the volume.
4
Instruction manual
TF and USB operation
Playback
•
Turn on the device.
•
Insert a TF (microSD) card into the slot
or a USB drive into the port. Press the
MODE button to enter the TF/USB mode.
• When playing, you can press
to play/pause the playback.
• During the playback you can press
the or buttons to go to a
previous or next track and press and hold
those buttons to adjust volume.
It may take up to 60 seconds to open
and verify a large TF card or USB drive with many files.
General TF/USB notes
• This unit is equipped with a TF slot and
a USB port that can read and play MP3
files stored on standard TF (microSD)
cards and USB drives up to 32 GB.
• FAT and FAT32 file system is supported by
this unit.
Never remove TF cards and USB drive
from the unit during playback, always stop
playback, then switch to another mode
before removing the storage to prevent
damage to your files and storage devices
themselves.
Specifications
FM radio
• The AUX or USB cable can used as
an FM radio antenna. Please insert the
cable into the unit and extend it for a
better signal reception.
•
Turn on the device.
•
Press the MODE button to select
the FM mode.
• Press and hold MODEto automatically scan and save all available
radio stations. The procedure will take
several minutes and cannot be interrupted.
• Once the search is finished, you can
press or to go to a previous or
next radio station. Press and hold those buttons to adjust volume.
Maintenance and care
Switch off the unit, unplug from the power
supply. The outside of the appliance can be
cleaned with a slightly damp cloth.
Accessories
Radio
Charger
Charging cable
3.5mm-3.5mm audio cable
Instruction manual
1 pc
1 pc
1 pc
1 pc
1 pc
Output power16 W
Input voltage
Nominal power consumption5 W
FM radio87.5 - 108 MHz
Battery power supplyLi-ion, 3.7V, 4000 mA/h
Net weight930 g
Unit dimensions215 * 110 * 72 mm
Specifications and functions are subject to change without notice. It is connected with continual
improvement of the device.
MANUFACTURED AND DISTRIBUTED BY TECHNO ELECTRIC LIMITED,
Legal address: 801 Luk Yu Building, 24 - 26 Stanley Street, Central, China
4
TELEFUNKEN and the TELEFUNKEN logo are trademarks of
5
TELEFUNKEN Licenses GmbH and are used under a trademark license.
DC 5V, 1 A
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.