Teka LP9 840 WHITE,LP9 840 INOX User guide

User Manual
LP9 840 WHITE/
EN
LP9 840 INOX
www.teka.com
1) Safety Information..........................................11) Safety Information..........................................1
Read this Manual
Dear Customer,
Please carefully read this manual before using the dishwasher, it will help you to use and maintain the dishwasher properly. Keep it to refer to it at a later date.
Pass it on to any subsequent owner of the appliance.
This manual contains sections on safety Instructions, Operating Instructions, Installation Instructions and Troubleshooting Tips, etc.
Before Calling for Service
To review the section on troubleshooting Tips will help you to solve some common problems by yourself .
If you can not solve the problems by yourself , please ask for the help of professional technicians.
2) Quick operation guide..................................... 42) Quick operation guide..................................... 4
3) Operation Instruction...................................... 53) Operation Instruction...................................... 5
Control Panel...................................................5
Dishwasher Features.................................... ...5
4) Prior using for the first time.............................. 64) Prior using for the first time.............................. 6
A Water Softener.......................................... 6
B Loading the Salt into the Softener.................7
C Fill the Rinse Aid Dispenser.........................7
D Function of Detergent .................................8
5) Loading the Dishwasher Basket...................... 115) Loading the Dishwasher Basket...................... 11
Attention before or after loading the Dishwasher
Baskets........................................................ 11
Loading the upper Basket...............................12
Loading the Lower Basket...............................12
Cutlery Basket........................................... .. 12
6) Starting a washing program............................136) Starting a washing program............................13
Wash Cycle Table...........................................13
Turning on the Appliance................................14
Change the program.......................................14
At the end of the Wash Cycle...........................14
NOTE:
The manufacturer, following a policy of constant development and updating of the product, may make modifications without giving prior notice.
This user manual shall also be got from the manufacturer or responsible vendor.
7) Maintenance and cleaning..............................157) Maintenance and cleaning..............................15
Filtering System.............................................15
Caring for the Dishwasher...............................16
8) Installation instruction....................................178) Installation instruction....................................17
Positioning the Appliance...............................17
About Power Connection................................17
Water Connection..........................................18
Start of dishwasher........................................19
9) Troubleshooting Tips......................................209) Troubleshooting Tips......................................20
Before calling for service.................................20
Error codes...................................................21
Technical information.....................................22
Loading the baskets according to En50242Loading the baskets according to En50242
1.IMPORTANT SAFETY INFORMATION1.IMPORTANT SAFETY INFORMATION
When using your dishwasher,
WARNING! WARNING!
follow the precautions listed below:
This appliance is intended to be used in household and similar applications such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. For EN60335-1 This appliance is not intended for use by persons (including children )with reduced physical, sensory or mental capabilities, or lack of experience and knowledge ,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. For IEC60335-1 This appliance is for indoor use only, for household use only. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid. Please unplug before cleaning and maintenance the appliance . Use a soft cloth moisten with mild soap, and then use a dry cloth to wipe it again.
1-11-1
EARTHING INSTRUCTIONS
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of an electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipment-earthing conductor and a grounding plug. The plug must be plugged into an appropriate outlet that i s i nstalled a nd earthed in a ccordance with all local codes and ordinances. Improper connection of the equipment-earthing conductor can result in the risk of an electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician. Do not abuse, sit on, or stand on the door or dish rack of the dishwasher. Do not operate your dishwasher unless all enclosure
panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out. Do not place any heavy objects on or stand on the door when it is open. The appliance could tip forward. When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal;
1-21-2
2) Warning: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position. Check that the detergent powder is empty after completion of the wash cycle. Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic it ems n check th e m anufacturer's
ot so marked, recommendations. Use only det ergent and rins e add itives des igned for an aut omatic dish washer. Never use soap, laundry detergent, or hand washing detergent in your dishwasher. Children should be supervised to ensure that they do not play with the appliance. The door should not be left open, since this could increase the risk of tripping. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. During installation, the power supply must not be excessively or dangerously bent or flattened. Do not tamper with controls. The appliance is to be connected to the water mains using new hose sets and that old hose-sets should not be reused. The maximum number of place settings to be washed is 13. The maximum permissible inlet water pressure is 1MPa. The minimum permissible inlet water pressure is 0.04MPa.
1-31-3
Disposal Disposal
Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled. Plastic parts are marked with the standard international abbreviations: PE for polyethylene, e.g. sheet wrapping material PS for polystyrene, e.g. padding material POM polyoxymethylene, e.g. plastic clips PP polypropylene, e.g. Salt filler ABS Acrylonitrile Butadiene Styrene, e.g. Control Panel .
WARNING! WARNING!
Packaging material could be dangerous for children! For disposing of package and the appliance please go to a recycling centre. Therefore cut off the power supply cable and make the door closing device unusable. Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office and your household waste disposal service. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
1-41-4
2.Quick operation guide2.Quick operation guide
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance
Fill the detergent dispenser
Check the rinse aid level
Check the regeneration
salt level
Load the baskets
Select a program
Press the Power switch button to switch on the appliance, Open the door.
Compartment A:Compartment A: With each wash cycle. Compartment B:B: For programs with pre-wash only.
(Follow the user instructions!)
CC
Mechanical indicator C. Mechanical indicator C. Electric indicator on control panel (if provided).
(On models with water softener system only.) Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel (for some models), you can estimate when to fill the salt into the softener by the number of cycles the dishwasher has run.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans, then load the baskets. Refer to the dishwasher loading instructions.
Close the door,press the program button until the selected program lights up. ( See the section entitled Operation instruction )
BB
AA
Running the dishwasher
Changing the program
Add forgotten dishes in the dishwasher.
If the appliance is switched off during a wash cycle.
Switch off the appliance
Turn off the water tap, unload the baskets
T urn on the water tap and press the Start/Pause button. The machine will start working after about 10 seconds.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent may have already been released and the water already drained. If this is the case, the detergent dispenser must be refilled.
2. Press the Start/Pause button ,then press the program button more than 3 seconds to cancel the running program.
3. Select a new program.
4. Restart the dishwasher.
1.Press the start/pause button to stop the machine.
2.Open the door.
3.Add the forgotten dishes.
4.Close the door, then press the start/pause button, the dishwasher will start running again after 10 seconds.
If the appliance is switched off during a wash cycle, when switched on again, please re-select the washing cycle and operate the dishwasher according to the original Power-on state ).
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop. Turn off the appliance using the Power button. It will shut off automaticly after 30 minutes without any operation
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to break. They will also dry better.Unload the appliance, starting from the lower basket.
WARNING!
Open the door carefully. Hot steam may escape when the door is opened!
44
3.Operation Instruction3.Operation Instruction
IMPORTANTIMPORTANT
To get the best performance from your dishwasher, read all operating instructions before using it for the first time.
Control PanelControl Panel
1414
331144
1. On/Off Button: to switch On/Off the appliance;
2.Child lock function: press Delay button and Alt button simultaneously to lock the program;
3.Delay Button : Press the button to add the delay time;
4.Alt Button: Dual zone wash function, press the button to select either upper basket or lower basket loaded;
5.Upper ;
6. ;
7.Child lock indicator;
8.Rinse Aid indicator: Indicates when the dispenser needs to be refilled;
9.Add salt indicator: Indicates when the dispenser needs to be refilled;
spray indicator
Lower spray indicator
55
1515 1414
77 88 10109 9
66
10.Extra drying indicators: To show Extra drying function
11.Start /Pause button: To start the selected washing program or pause the washing program when the machine is working starting up or not;
12.Extra drying Button : To select Extra drying function. Extra drying function Only be used with Intensive, Normal, ECO Glass,90min.);
13.Program Button : To Press the button to select appropriate Program;
14.Program indicator :to show program which you have chose ;
15.Display screen: to show the reminding time and delay time,error codes etc .
1313
1212
111122
Dishwasher FeaturesDishwasher Features
Front view
1
2
3 4
5
Back View
6
7
8
9
10
Upper Basket
1
Inner pipe
2
Lower Basket
3
Salt Container
4
Dispenser
5
Cup Shelf
6
Spray arms
7
Filter assembly
8
Inlet pipe connector
9
55
10
Drain pipe
4.Prior using for the first time4.Prior using for the first time
Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt container with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water SoftenerA. Water Softener
The water softener must be set manually, using the water hardness dial. The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level o f salt consumption.
Note:1Note:1
Note:2Note:2
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water softener set model within 60seconds after the appliance was switched on;
3. Press the Start/Pause button to select the proper set according to your local environment, the sets will change in the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the On/Off button to end the set up model.
WATER HARDNESS
dH
6-11
12-17 2.1-3.0
18-22 31-40 22-28 3.1-4.0
23-34 4.1-6.0
35-55 61-98 43-69 6.1-9.8
¡ã
¡ã
dH=1.25 Clarke=1.78 fH=0.178mmol/l
1
dH: German degree
¡ã
fH: French degree Clark: British degree
¡ã
¡ã
fH
0~90~5 0~0.94
10-20
21-30
41-60
¡ã
Clarke
0~6
7-14
15-21
29-42
mmol/l
1.0-2.0
Selector Position
H1
H2
H3
H4
H5
H6
The manufactory setting: H4 (EN 50242)
Salt c o nsumption
(gram/cycle)
0
9
12
20
30
60
Contact your local water board for information on the hardness of your water supply.
NOTE:NOTE:
If your model does not have any water softener, you may skip this section.
WATER SOFTENER The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt container specifically designed to eliminate lime and minerals from the water.
66
B. Loading the Salt Into the SoftenerB. Loading the Salt Into the Softener
Always use the salt intended for use with dishwasher. The salt container is located beneath the lower basket and should be filled as explained in the following:
Attention!
Only use salt specifically designed for the use in dishwashers! Every other type of salt not specifically designed for the use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any damages caused.
Only fill with salt just before starting one of the complete washing programs. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.
A After the lower basket has been removed, unscrew and remove the cap from the salt container. B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
Full fill the salt container with water,It is normal for a small amount of water to come out of the
C
salt container.
D After filling the container , screw the cap tightly back clockwise. E The salt warning light will stop being after the salt container has been filled with salt.
F Immediately after filling the salt into the salt container, a washing program should be started (We suggest to use a short
program). Otherwise the filter system, pump or other important parts of the machine may be damaged by salty water. This is out of warranty.
11
22
NOTE:NOTE:
1. The salt container must only be refilled when the salt warning light in the control panel comes on. Depending on how well the salt dissolves, the salt warning light may still be on even though the salt container is filled. If there is no salt warning light in the control panel (for some Models),you can estimate when to fill the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.
C. Fill the Rinse Aid DispenserC. Fill the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
77
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid level fall 1 / 4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below. Full 3 / 4 ful l 1 / 2 ful l 1 / 4 full - Should refill to eliminate spotting Empty
C (Rinse-Aid indicator) C
11 22 33
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
1
Pour the rinse aid into the dispenser, being careful not to overfill.
2
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
3
NOTE:NOTE:
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser set on "4". If spots and poor drying are a problem, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "5". If the dishes still are not drying properly or are show spots, adjust the dial to the next higher lever until your dishes are spot-free. The recommended setting is "4". (Factory value is "4".)
NOTE:NOTE:
MAXMAX
Adjust lever
Adjust lever
(Rinse)
(Rinse)
Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or knife blades.
D. Function of DetergentD. Function of Detergent
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of the commercial quality detergents are suitable for this purpose.
Attention!
Proper Use of Detergent Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry. Don't put powdered detergent into the dispenser until you're ready to wash dishes.
88
Detergents
There are 3 sorts of detergents
1.With phosphate and with chlorine
2.With phosphate and without chlorine
3.Without phosphate and without chlorine
Normally new pulverised detergent is without phosphate. Thus the water softener function of phosphate is not given. In this case we recommend to fill salt in the salt container even when
the hardness of water is only 6 dH. If detergents without phosphate are used in the case of hard water often white spots appear on dishes and glasses. In this case please add more detergent to reach better results. Detergents without chlorine do only bleach a little. Strong and coloured spots will not be removed completely. In this case please choose a program with a higher temperature.
Concentrated Detergent
Based on their chemical composition, detergents can be split in two basic types:
conventional, alkaline detergents with caustic components low alkaline concentrated detergents with natural enzymes
Detergent Tablets
Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programs. Therefore please use long programs when using detergent tablets, to ensure the complete removal of detergent residuals.
Detergent Dispenser
The dispenser must be refilled before the start of each wash cycle following the instructions provided in the wash cycle table . Your dishwasher uses less detergent and rinse aid than Conventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load. More heavily soiled items need more detergent. Always add the detergent just before starting the dishwasher, otherwise it could get damp and will not dissolve properly.
Amount of Detergent to Use
11 22
NOTE:NOTE:
If the lid is closed: press release button. The lid will spring open. Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.
Detergent powder
Detergent tablet
WARNING! WARNING!
Dishwasher detergent is corrosive! Take care to keep it out of reach of children.
99
Fill in Detergent
Fill the detergent dispenser with detergent. The marking indicates the dosing levels , as illustrated on the right:
The place of main wash cycle detergent placed.
A
The place of pre-wash cycle detergent placed.
B
AA
Please observe the manufacturers dosing and storage Recommendations as stated on the detergent packaging.
Close the lid and press until it locks in place.
If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.
BB
NOTE:NOTE:
You find information about the amount of detergent for the single programme on the last page. Please aware, that according to the level soiling and the specific hardness of water differences are possible. Please observe the manufacturer's recommendations on the detergent packaging.
Close the Detergent compartment
If your dishes are only moderately dirty, you may be able to use less detergent than recommended.
compartment. Press down the lid (1) until it clicks shut (2).
If you are using detergent in tablet form, read the manufacturer recommendations on the packaging in order to determine where the tablets should be placed inside the dishwasher (e.g. in cutlery basket, detergent compartment, etc.). Make sure that the lid on the detergent compartment is closed, even if you are using tablets.
1010
5.Loading the Dishwasher Baskets5.Loading the Dishwasher Baskets
RecommendationRecommendation
Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low a temperature as possible. To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the program has ended.
For washing in the dishwasher the following cutlery/dishesFor washing in the dishwasher the following cutlery/dishes
Are not suitable
Cutlery with wooden, horn china or mother-of-pearl handles Plastic items that are not heat resistant Older cutlery with glued parts that are not temperature resistant Bonded cutlery items or dishes Pewter or copper items Crystal glass Steel items subject to rusting Wooden platters Items made from synthetic fibres
Are of limited suitability
Some types of glasses can become dull after a large number of washes
Silver and aluminum parts have a tendency to discolour during washing
Glazed patterns may fade if machine washed frequently
Attention before or after loading the Dishwasher BasketsAttention before or after loading the Dishwasher Baskets
(For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and cutlery baskets may vary from your model.)
Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots/pans, etc. are faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.
NOTE:NOTE:
Very small items should not be washed in the dishwasher as they could easily fall out of the basket.
Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that water cannot collect in the container or a deep base.
Dishes and items of cutlery must not lie inside one another, or cover each other. To avoid damage to glasses, they must not touch. Load large items which are most difficult to clean into the lower basket. The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups Long bladed knives stored in an upright position are a potential hazard! Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Please do not overload your dishwasher. This is important for good results and for reasonable consumption of energy.
Removing the DishesRemoving the Dishes
To prevent water dripping from the upper basket into the lower basket, we recommend that you empty the lower basket first and then the upper basket.
1111
The Method Loading Normal DishwareThe Method Loading Normal Dishware
Loading the Upper BasketLoading the Upper Basket
The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they will not get moved by the spray of water.
IN
Please be reminded that:
Pots, serving bowls, etc, must always be placed top down. Deep pots should be slanted to allow water to flow out.
The Bottom Basket features folding spikes so that larger or more pots and pans can be loaded.
Adjusting the Upper Basket
The height of the upper basket can be adjusted in order to create more space for large utensils both for the upper /lower basket. The height of the upper basket can be adjusted by lift up the basket for the upper position, and up press the handle to lower the upper basket, see the picture below:
Up press the handle
Lift the basket
Lift the basket
for upper postion
for upper postion
Up press the handle
to lower the basket
to lower the basket
Loading the Lower BasketLoading the Lower Basket
We suggest that you place large items and the most difficult to clean items are to be placed into the lower basket: such as pots, pans, lids, serving dishes and bowls, as shown in the figure below. It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm.
IN
Folding back the cup shelives
For better stacking of pots and pans, the spikes can be folded down as show in the picture right.
Adjust handleAdjust handle
Cutlery BasketCutlery Basket
Cutlery should be placed in the cutlery rack separately from each other in the appropriate positions, and do make sure the utensils do not nest together, this may cause bad performance.
For a top quality cleaning, place the silverware in the basket
For a top quality cleaning, place the silverware in the basket
making sure that:
making sure that:
They do not nest together.They do not nest together. Silverware is placed with the male face up.Silverware is placed with the male face up. Long utensils in the middle. Long utensils in the middle.
Folding Spikes of Lower Basket
For better stacking of pots and pans, the spikes can be folded down as show in the picture right.
1212
6.Starting a washing program6.Starting a washing program
Wash Cycle TableWash Cycle Table
( )
NOTE:NOTE:
ProgramProgram
Auto
Intensive
Normal
(*EN5 0242)
Glass
Rapid
Auto sensing wash, lightly, normally or heavily soiled crockery, with or with out dried-on food
For heaviest soiled crockery, and normally soiled pots pans dishes etc with dried on soiling.
For normally soiled loads, such as pots, plates,glasses and lightly soiled pans.
This is standard programme, it is suitable to clean normally soiled tableware and it is the most efficient programme in terms of its combined energy and water consumption for that type of tableware.
For lightly soiled crockery and glass
For normally soiled loads that need quick wash.
A shorter wash for lightly soiled loads that do not need drying.
Means: need to fill rinse into the Rinse-Aid Dispenser.
Description
Cycle Selection
Cycle Selection
Information
Information
Description
of Cycle
of Cycle
Pre-wash (45 ) Autowash(45-55 ) Rinse Rinse (65 ) Drying
Prewash 50 Wash 62 Rinse Rinse Rinse 65 Drying
Prewash(45 ) Wash (55 ) Rinse Rinse (65 ) Drying
Prewash Wash (45 ) Rinse(65 ) Drying
Pre-wash wash(40 ) Rinse Rinse(60 ) Drying
Wash 65 Rinse Rinse (65 ) Drying
Wash (45 ) Rinse Rinse (45 )
Detergent
Detergent
pre/main
pre/main
5/30g (Or3in1)
5/30g (Or3in1)
5/30g (Or3in1)
5/30g (Or3in1)
5/30g (Or3in1)
35g
20g
Running
Running
time(min)
time(min)
150
175
185
195
115
90 12.51.35
40
Energy
Energy
(Kwh)
(Kwh)
0.9~1.5
1.6
1.3
0.92
0.87
0.75
Water
Water
(L)
(L)
10~15
17
14
10
14
11.5
Rinse
Rinse
Aid
Aid
Soak
To rinse dishes that you plan to wash later that day
Prewash
15 0.02
NOTE:NOTE:
*EN 5 0242 : This program is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 13 setting Position Upper basket: upper wheels on rails Rinse aid setting: 6 PI:0.49W; P :0.45W.
Left-on mode duration: Power will be cut off automatically after program finished for 30 minutes.
o
Turning On the ApplianceTurning On the Appliance
Starting a cycle wash
1
Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the lower basket first, then the upper one (see the section entitled Loading the Dishwasher ).
2
Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
3
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4
Close the door, press the Power button, to switch on the machine.
5
Press the program button , the wash program will be changed as follows direction: ECO->Glass->90min->Rapid->Soak->Auto->Intensive->Normal;
If a program is selected, the response light will light. Then press the Start/Pause button, the dishwasher begins to start.
1313
4
NOTE:NOTE:
When you press the Start/Pause button to pause during washing, the running indicator will stop blinking and the dishwasher will mooing every minute unless you press the Start/Pause button to start.
Change the Program...Change the Program...
Premise:
1
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the Detergent " ).
2
Press the Start/Pause button , the machine will be in standby state, press the program button more than 3s then you can change the program to the desired cycle setting (see the section entitled " Starting a wash cycle. . ." ).
NOTE:NOTE:
If you open the door during a wash cycle , the machine will pause. The program light will stop blinking and the buzzer will mooing every minute unless you close the door . After you close the door ,the machine will keep on working after 10 seconds.
If your model has broken remember function, the machine will go on to finish the selected program after the power cut.
Forgot to Add a Dish?Forgot to Add a Dish?
A forgotten dish can be added any time before the detergent cup opens.
Press the Start/Pause button
1
Open the door a little to stop the washing.
2
After the spray arms stop working,you can open the door
3
completely.
Add forgotten dishes.
4
Close the door
5
Press the Start/Pause button, the dishwasher will run
6
after 10 seconds.
At the end of the Wash CycleAt the end of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off the appliance using the Power switch button, shut off the water supply and open the door of the dishwasher. Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
The program light is on but is not blinking, only in this case the programme has ended.
1.Switch off the dishwasher by pressing the Power button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes before removing from the appliance. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside. Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto the dishes in the lower one.
WARNING! WARNING!
It is dangerous to open the door when washing, because the hot water may scald you.
1414
7.Maintenance and Cleaning7.Maintenance and Cleaning
Filtering SystemFiltering System
The filter prevents larger remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed.
The filter system consists of a coarse filter,a flat (Main filter) And a microfilter(Fine filter).
Main filter
2
1
3
Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.
Coarse filter
Larger items, such as pieces of bones or glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently squeeze the tap on the top of this
filter and lift out.
Fine filter
This filter holds soil and food residues in the sump area and
prevents it from being redeposit on the dishes during wash cycle.
1
2
3
Filter assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter device, pull the cup handle in the upward direction.
nn
The dishwasher must never be used without the filters.
nn
WARNING! WARNING!
Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and utensils.
1
2
NOTE:NOTE:
When following this procedure from step1 to step 2, the filter system will be removed; when following it from Step 2 to Step 1, the filter system will be installed.
Step 1 Turn the filter in anti-clockwise direction,
Step 2 lift the filter assy up
1515
Remarks:
- Inspec t the f ilters f or blo ck ing afte r every time the dish washer has been used .
- By un screwing the c oa rse filt er, you can remove the filter system. Remove any food remnants an d clean the filter s under running water.
The entire filter assembly should be cleaned once a week.
Cleaning the Filter
To clean the coar se fil te r and the fin e filt er, use a cleani ng brush. Reas semble t he filte r parts as sh own in the figu res on the last p ag e and reinsert the en tire a ssembly in the dishwas he r, positioning it in i ts seat and p ressing downwards.
When cleani ng the f il ters, don 't knock on them. Otherwise, the filte rs co ul d be cont orted and the p erformance of the dishwas her cou ld be decreased.
The cont rol pane l can be clea ne d by using a lightly dampened cloth . After cl eaning, make sur e to dry it thoroughl y.
For the exterior, use a good appliance polis h wax. Never us e sharp objects, scour ing pads or h arsh cle an ers on any part of the dishwasher.
Cleaning the Door
To clean the edge aroun d the d oor, you should use only a soft warm, damp cloth. To avoid penetration of w ater i nto the door lo ck and electrical compon ents, do not use a s pray cle aner o f any k ind.
Never us e a spr ay cleaner to clean t he door pane l as it may da mage the door lock and elec trical components . Abrasive agents or some paper towels should not be used be cause of the ri sk of scratchin g or le aving sp ots on the stainless steel surface.
Protect Against Freezing
please t ake frost protec tion measures on the dishwas her in winter. E very fter washing cycles, please o perate a s follow s
1.Cut off the elect rical po wer to the dish washer.
2.Turn off the water su pply and disco nnect th e water inlet p ipe fr om the water valve.
3.Drain t he water from the inl et pip e and w ater valve. (Use a pa n to gather the water )
4.Reconnec t the w ater inlet pip e to the water valve.
5.Remove the filt er at the bot tom of the tu b and u se a sponge t o soak up water in the sum p.
:
If your dishwa sher can not work becau se of the ice, pleas e c ontact professi on al ser vice per sons.
time a
Cleaning the Spray Arms
It is n ecessary to clea n the spray arms regu larly fo r hard water chem icals wi ll clog the spray a rm jet s a nd bea rings.
To remove the u pp er spr ay arm, hold the nut, rotate th e arm clockwise to remove it .
To remove the l ower spray arm, pull out the spray a rm upwar d.
Was h the arms in soapy and warm water and use a sof t brush to clean th e jets. Replace them after ri nsing them thoro ughly.
After Every Wash
After every wash , turn off the wate r supply to t he appliance and leave th e door slightly open so that mo isture and odo urs are not t rapped i nside.
Remove the Plug
Before c leaning or per fo rming maintenan ce, always remove t he plug from th e sock et.
No Solvents or Abrasive Cleaning
To clean the exte rior and rubber parts of the dishwasher, do not use solv ents or abrasi ve cleanin g produc ts. Only use a clot h with warm s oapy wat er. To remove spots o r stains from the surfa ce of the interior, use a cloth dampened with wate r an a l ittle vinegar, or a cleaning product m ade specifically f or dishwashe rs.
Position the appliance in the desired locati on . Th e back should rest against the wall behind it, and the sides, along th e adjacent cabinets or walls. The dishwash er is equipped with water supply an d drai n hoses that can be posit ioned either t o the r ight o r the l eft side s to fa cilitate prop er insta llation.
When not in Use for a LongTime
It is r ecommend t hat you run a wash c ycle wit h the dishwasher e mpty a nd then remove the plug from the socket, tu rn off the wa ter su pp ly and leave the do or of the applianc e slight ly open. This will help t he door seals to la st lon ge r and prevent odours from forming within the applian ce.
Moving the Appliance
If the applian ce must be moved, t ry to k eep it in the ve rtical position. If ab solutely nece ssary, it can be positione d on its back.
Seals
One of the factors that cause odour s to fo rm in the dishwashe r is fo od tha t remain s trappe d in th e seals. Periodic cleaning with a damp sponge will prevent t his from occ urring.
Once the appli an ce is positi oned for levelli ng, the height of the dishwashe r ma y be alt ered via adjustment of the screwing level o f the f eet.
For personal safety: Do not use an extension cord or an adapter plug with this appliance. Do not, under any circumstances, cut or remove the earthing Connection from the power cord.
Please l ook at the rating label to know t he ratin g voltag e and connect the dishwasher to t he appro priate power s upply. Use the requir ed fuse 10 amp, time delay f use or circuit breaker recomme nded a nd pro vide sep arate ci rcuit serving only t his appliance.
Ensure t he volta ge and frequen cy o f the pow er being c orrespond s to those on the ra ting pla te. Only insert the plug in to an e lectric al socke t which is eart hed properly. If th e electr ical socket to which the ap pliance must be connec te d is not appropriate for the plug , re pl ace th e sock et , rather than using a adaptors or the like as they cou ld cau se overh ea ting a nd b ur ns .
Water ConnectionWater Connection
Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and damage the appliance.
WARNING! WARNING!
Please close the hydrant after using.
Drain hose Connection
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to avoid bending or crimping it. The top of the hose must be less than 1000mm.
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, BPLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
Front
Counter
NOTE The top of the hose must be less than 1000mm.
Drain pipe
A
1818
B
MAX 1000mm
40mm
How to Drain Excess Water From Hoses
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose. It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish. The water drain hose should be fixed .
Start of Dishwasher Start of Dishwasher
The following things should be checked before starting the dishwasher.
1 The dishwasher is level and fixed properly 2 The inlet valve is open 3 Fill hose connections are fully tightened and not leaking 4 The wires are tightly connected 5 The power is switched on 6 The inlet and drain hoses are knotted 7 All packing materials and printings should be taken out from the dishwasher
Attention:Attention:
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.
1919
9.Troubleshooting Tips9.Troubleshooting Tips
Before Calling for Service Before Calling for Service
Review the charts on the following pages may save you from calling for service.
Problem Possible CausesWhat to Do
Dishwasher doesn't
start
Fuse blown, or the circuit breaker acted
Power supply is not turned on
Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher
Make sure the dishwasher is turned on and the door is closed securely.
Make sure the power cord is properly plugged into the wall socket.
Technical problems
General problems
water not pumped
form dishwasher
Suds in the tub
Stained tub interior
White film on
inside surface
Water pressure is low
Door of dishwasher not properly closed.
Kink in drain hose
Filter clogged
Kitchen sink clogged
Improper detergent
Spilled rinse-aid
Detergent with colourant was used
Hard water minerals
Check that the water supply is connected properly and the water is turned on.
Make sure to close the door properly and latch it.
Check drain hose.
Check coarse the filter (see section titled " Cleaning The Filter ")
Check the kitchen sink to make sure it is draining well. If the problem is the kitchen sink not draining ,you may need a plumber rather than a serviceman for dishwashers.
Use only the special dishwasher detergent to avoid suds. If this occurs, open the dishwasher and let suds evaporate. Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then select any cycle. Dishwasher will drain out the water at the first step.Open the door after draining is stop and check if the suds is disappeared. Repeat if necessary.
Always wipe up rinse-aid spills immediately.
Make sure that the detergent is the one without colourant.
To clean the interior, use a damp sponge with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds.
Noise
There are rust
stains on cutlery
Knocking noise
in the wash cabinet
Rattling noise
in the wash cabinet
Knocking noise
in the water pipes
The affected items are not corrosion resistant.
A program was not run after dishwasher salt was added. Traces of salt have gotten into the wash cycle.
The lid of the softer is loose
A spray arm is knocking against an item in a basket
Items of crockery are loose in the wash cabinet
This may be caused by on-site installation or the cross-section of the piping.
2020
Always run the quick wash program . without any crockery in the dishwasher and without selecting the Turbo function (if present), after adding dishwasher salt.
Check the lip .Ensure the fix is fine.
Interrupt the program, and rearrange the items which are obstructing the spray arm.
Interrupt the program, and rearrange the items of crockery.
This has no influence on the dishwasher function. if in doubt, contact a suitably qualified plumber.
Problem Possible Causes What to Do
The dishes
are not clean
The dishes were not loaded correctly.
The program was not powerful enough.
Not enough detergent was dispensed.
Items are blocking the path of spray arms.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive program. See" Wash Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate freely.
Unsatis
-factory washing result
Unsatis
-factory drying result
Cloudiness
on glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes
are not drying
The filter combination in the base of wash cabinet is not clean or is not correctly fitted. This may cause the spray arm jets to get blocked.
Combination of soft water and too much detergent.
Aluminum utensils have rubbed against dishes.
Dishes block detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed too soon
Wrong program has been selected
Use of cutlery with a low-quality coating
Clean and/or fit the filter combination correctly. Clean the spray arm jets. See "Cleaning the Spray Arms".
Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid dispenser.
Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can escape. Begin unloading the dishwasher only once t he dishes are barely warm to the touch. Empty the low basket first. This prevents water form dropping off dishes in the upper basket.
In short program the washing temperature is lower. This also lowers cleaning performance. Choose a program with a long washing time.
Water drainage is more difficult with these items. Cutlery or dishes of this type are not suitable for washing in the dishwasher.
Error CodesError Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes
E1
E4
E8
WARNING! WARNING!
Meanings
Longer inlet time.
Overflow.
Divider vale failed
nn
If overflow occurs, turn off the main water supply before calling a service.
nn
If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
2121
Possible Causes
Faucets is not opened, or water intake is restricted,or water pressure is too low.
Some element of dishwasher leaks .
Divider vale failed
Technical InformationTechnical Information
598598
(w
(w
ith
ith
t
t
h
h
e d
e d
o
o
or
or
c
c
lo
lo
s
s
e
e
d
d
)
6
6
1
1
0
0
)
845845
51
5
7
7
1
1
1
Height : 845mm Width : 598mm
Depth : 610mm(with the door closed)
Water pressure: 0.04-1.0MPa Power supply: see rating label
Capacity: 13 place settings
2222
66
66
e
e
Th
Th
.
.
lf
lf
e
e
sh
sh
e
e
88
44 44
11 11 11 11
44
4
2
55 55
22 22
33 33 33
11
11
55 55
77
55 55 55
55
55 55 55 55 55
s on th
s on th
e
e
r
r
a
a
w
w
t
33 33
22
ShelfShelf
t
la
la
f
f
t
t
igh
igh
he l
he l
t
t
e
e
ac
ac
pl
pl
se
se
a
a
le
le
P
P
e:
e:
t
t
o
o
N
N
.
.
han 1.5kg
han 1.5kg
t
t
ss
ss
et:
et:
le
le
s
s
ask
ask
i
i
t
t
b
b
gh
gh
ly
ly
r
r
e
e
t
t
t
t
wei
wei
l
l
a
a
t
t
.Cu
.Cu
to
to
3
3
1
4444444444
Dessert spoons
44
11 11
44 44 44
11 11 11 11
5
Soup spoons
1
Serving forks
Serving spoons
7
6
Forks
Knives
2
3
e
e
c
c
n
n
da
da
or
or
in acc
in acc
Gravy ladles
ests
ests
8
t
t
y
y
it
it
l
l
i
i
b
b
ara
ara
p
p
m
m
o
o
c
c
r
r
42
42
fo
fo
n
n
matio
matio
r
r
TeaspoonsTeaspoons
fo
fo
n
n
4
I
I
02
02
5
5
N
N
E
E
ith
ith
w
w
gs
gs
tin
tin
t
t
e
e
s
s
: 13 place
: 13 place
ty
ty
paci
paci
a
a
C
C
n
n
o
o
i
i
t
t
si
si
o
o
p
p
r
r
e
e
w
w
: lo
: lo
et
et
k
k
s
s
a
a
upper b
upper b
e
e
h
h
f t
f t
o
o
n
n
o
o
ti
ti
si
si
o
o
P
P
O
O
C
C
E
E
mme:
mme:
gra
gra
o
o
Pr
Pr
g: 6R
g: 6
n
n
i
i
ett
ett
s
s
e aid
e aid
ns
ns
i
i
R
4 So
4
H
H
:
:
ting
ting
t
t
e
e
s
s
r
r
e
e
ften
ften
So
2
1
Cups
3
Saucers
4
Glasses
5
Small serving bowl
Medium serving bowl
6
Large serving bowl
7
11
66
ShelfShelf
33
22
11
33
33
33
11
11
8
Dessert dishes
Dinner plates
88
77
9
1010
10
Soup plates
Oval platter
99
33
11
22
33
t:
t:
33
N
I
Loading the baskets according to En50242: Loading the baskets according to En50242:
1.Upper basket:1.Upper basket:
4
33
er baske
er baske
w
w
o
o
.L
.L
2
2
7 7
88
77
IN
2323
Technical Data Sheet
Sheet of household dishwasher according to EU Directive 1059/2010:
Manufacturer
Type / Description
Standard place settings
Energy efficiency class
Annual energy consumption
11
22
Energy consumption of the standard cleaning cycle
Power consumption of off-mode
Power consumption of left-on mode
Annual water consumption
Drying efficiency class
Standard cleaning cycle
33
44
55
Program duration of the standard cleaning cycle
Noise level
Mounting
Could be build-in
TEKA
LP9 840 WHITE,LP9 840 INOX
13
A++
262 kWh
0.92 kWh
0.45 W
0.49 W
2800 litre
A
ECO 45
195 min
47dB(A) re 1 pW
Free standing
Yes
Height
Width
Depth (with connectors)
Power consumption
Rated voltage / frequency
Water pressure (flow pressure)
84.5 cm
59.8 cm
61.0 cm
1760-2100 W
220-240 V~50 Hz
0.4-10 bar = 0.04-1 Mpa
NOTE
A + + + (highest efficiency) to D (lowest efficiency)
11
Energy consumption 262 kWh per year, based on 280 standard cleaning cycles using cold water fill and
2 2
the consumption of the low power modes. Actual energy consumption will depend on how the appliance is used.
33
Water consumption 2800 litre per year, based on 280 standard cleaning cycles. Actual water consumption will depend on how the appliance is used.
A (highest efficiency) to G (lowest efficiency)
44
This program is suitable for cleaning soiled normally soiled tableware and that it is the
55
most efficient programme in terms of its combined energy and water consumption for that type of tableware.
The device meets the European standards and the directives in the current version at delivery(If the version number is not in conformity with the latest standards, please refer to the latest version number. ):
- LVD 2014/35/EU
- EMC 2014/30/EU
- ERP 2009/125/EC
The above values have been measured in accordance with standards under specified operating conditions. Results may vary greatly according to quantity and pollution of the dishes, water hardness, amount of detergent, etc.
The manual is based on the European Union's standards and rules.
2424
www.teka.com
Asped mos eriatius sit atet hicil et velit
Loading...