TechniSat DigitRadio 110 IR Instruction Manual
Instruction Manual
TechniSat
DigitRadio 110 IR
Internet, DAB/DAB+ and FM Digital Radio with
Bluetooth Technology and Spotify and Multi-room features
EN
TechniSat DigitRadio 110 IR
2
Important Safety Instructions
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2. Do not block any ventilation openings of unit.
3. The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the unit.
4. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause
serious injury to the unit.
5. Please read Rating Labels at the back of unit for power input and other safety information.
6. This unit is intended to be used only with the power supply provided.
7. Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at any point where they exit from the unit.
8. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull
straight out from the outlet.
9. Repair or replace all electric service cords that have become frayed or otherwise damaged
immediately. Do not use a cord that shows cracks or abrasion damage along its length, the plug,
or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet unless
the blades can be fully inserted to prevent blade exposure.
11. During lightning or raining days, unplug the unit for additional protection during thunderstorms or
when the unit is not used for prolonged periods. This will prevent damage to the unit from
lightning and power surges.
12. Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you
may be exposed to dangerous voltage or other hazards. Any service work should be carried out
by qualified technicians.
13. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If
so, simply reset the product to resume normal operation by following the instruction manual. In
case the function could not resume, please use the product in other location.
14. The means of disconnecting this apparatus from the mains supply is plug of adapter. The
disconnect device shall remain readily operable.
15. The battery of remote control shall not be exposed to excessive heat such as sunshine, fire or
the like.
16. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
17. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit
switched on while unattended for long periods of time, e.g. overnight, while on holiday or while
out of the house. Switch it off and disconnect the mains plug from the mains socket.
DigitRadio 110 IR TechniSat
3
Contents
Important Safety Instructions ................................................................................................... 2!
Contents .................................................................................................................................. 3!
Getting Started ......................................................................................................................... 5!
Unit Views ............................................................................................................................ 6!
Remote Control View ........................................................................................................... 7!
Setup Wizard ........................................................................................................................... 8!
Internet Radio mode .............................................................................................................. 10!
‘Local “Country”’ Stations ................................................................................................... 10!
Selecting a station through ‘Stations’ ................................................................................. 10!
Selecting a station through ‘Podcasts’ ............................................................................... 11!
Getting Access Code and FAQ Solution ............................................................................ 11!
Adding station to ‘My Favourites’ ....................................................................................... 12!
Adding station to ‘My Added Stations’ ............................................................................... 12!
View Station Information .................................................................................................... 12!
Storing Preset Stations ...................................................................................................... 12!
Recalling a Preset Station .................................................................................................. 12!
Spotify Connect ..................................................................................................................... 13!
Using Spotify Connect ....................................................................................................... 13!
Controlling Spotify Connect ............................................................................................... 14!
Using another Spotify account with your radio ................................................................... 14!
Music player Mode ................................................................................................................. 15!
Setting up a Music Server .................................................................................................. 15!
Sharing Media with Windows Media Player ....................................................................... 15!
Playing Shared Media ........................................................................................................ 16!
My Playlist .......................................................................................................................... 17!
Repeat Play Mode ............................................................................................................. 17!
Shuffle Play Mode .............................................................................................................. 17!
Clearing My Playlist ........................................................................................................... 17!
Prune Servers .................................................................................................................... 17!
Now Playing Information .................................................................................................... 17!
DAB Mode ............................................................................................................................. 18!
Selecting DAB mode .......................................................................................................... 18!
Selecting another Station ................................................................................................... 18!
Secondary Service ............................................................................................................. 18!
Scanning Stations .............................................................................................................. 18!
Prune Invalid ...................................................................................................................... 19!
TechniSat DigitRadio 110 IR
4
DRC (Dynamic Range Control) value ................................................................................ 19!
Changing Station Order ..................................................................................................... 19!
Viewing Station Information ............................................................................................... 19!
Storing Preset Stations ...................................................................................................... 20!
Recalling a Preset Station .................................................................................................. 20!
FM Mode ................................................................................................................................ 21!
Selecting FM Mode ............................................................................................................ 21!
Scan setting ....................................................................................................................... 21!
Audio Settings .................................................................................................................... 21!
Storing Preset Stations ...................................................................................................... 21!
Recalling a Preset Station .................................................................................................. 22!
Bluetooth Mode ...................................................................................................................... 23!
General Operation ................................................................................................................. 24!
Setting Sleep ...................................................................................................................... 24!
Setting Alarm ..................................................................................................................... 24!
Setting Equaliser ................................................................................................................ 24!
Network Setup ................................................................................................................... 25!
Setting Time/Date .............................................................................................................. 25!
Setting Language ............................................................................................................... 25!
Factory Reset ..................................................................................................................... 26!
Software Update ................................................................................................................ 26!
Setup Wizard ..................................................................................................................... 26!
Viewing System Info .......................................................................................................... 26!
Setting Backlight ................................................................................................................ 27!
Multi-room .......................................................................................................................... 27!
Specification .......................................................................................................................... 30!
DigitRadio 110 IR TechniSat
5
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
! Main unit
! Instruction manual
! Remote control and AAA alkaline batteries
! Power adapter
! DAB/FM antenna
! RCA cable
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
! Where the radio will be exposed to direct sunlight.
! Where the radio will be close to heat radiating sources.
! Where the humidity is high and ventilation is poor.
! Where it is dusty.
! Where it is damp or there is a possibility of water dripping or splashing onto unit.
Wireless LAN Setting
" A broadband Internet connection.
" A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
" If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
" If your wireless network is configured for trusted stations you will need to enter the Radio’s MAC
address into your wireless access point. To find the Radio’s MAC address use menu items as
follows: Main menu > System settings > Network > View settings > MAC address.
Before you continue, make sure that your wireless access point is powered up and connected to your
broadband Internet. To get this part of the system working, read the instruction supplied with the
wireless access point is highly recommended.
Adjusting the Antenna
Unwind the DAB/FM antenna and screw it to Antenna socket on the back of the unit to ensure you
receive the best reception possible in both DAB and FM radio modes. It may be necessary to adjust
the position of the radio and /or antenna to achieve the best signal.
Using Optical Cable
Connect a fiber-optical digital cable to Optical Out socket on the back of the unit will allow your radio
transmitting digital signal to audio equipment.
TechniSat DigitRadio 110 IR
6
Using RCA Cable
Connect the 3.5 mm plug at the end of your RCA cable to the Audio Out socket on the back of this
unit. Then insert the Red and Black plugs at the other end of the RCA cable to your audio device.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the back of the unit. Then
insert the power adapter into the mains socket. Press button on the unit or on the remote control to
turn unit on or standby. To switch the unit off completely, unplug the power adapter from the mains
socket.
Unit Views
1. Remote control sensor
2. Display
1. Optical Out socket
To connect an Optical cable.
2. Audio Out socket
To connect a RCA cable.
3. DC IN socket
4. Antenna socket
5. button
Press to switch radio on or standby.
DigitRadio 110 IR TechniSat
7
Remote Control View
Replacing the batteries:
1. Open the battery compartment cover
on the back of your remote control.
2. Install two AAA new batteries referring
to the markings direction inside the
battery compartment.
# Note: do not reverse any battery
and do not mix battery types, also
do not mix old and new batteries.
When discard your old battery,
please considering eco-friendly.
3. Cover the battery compartment door.
1. button
Press to switch radio on or standby.
2. OK button
Press to confirm your selection.
3. buttons
Press to browse options.
4. VOL +/- buttons
Press to adjust volume.
5. MENU button
Press to display menu options.
6. MODE button
Press to switch among Internet, Spotify, Music
player, DAB, FM and Bluetooth modes.
7. INFO button
Press to view station information.
8. MUTE button
Press to mute radio, press again to pick up
sound.
9. SCAN button
Press to scan for DAB and FM stations.
10. button
Press to skip to previous track in Music player
and Spotify mode.
Press and hold to rewind current track in Music
player and Spotify mode.
11. button
Press to skip to next track in Music player and
Spotify mode.
Press and hold to fast forwards current track in
Music player and Spotify mode.
12. button
Press to pause/play current track in Music
player and Spotify mode.
13. Preset buttons 1-10
Press and hold to save a preset station.
Press to recall a saved preset station.
14. SLEEP button
Press to set up sleep time.
15. SNOOZE button
Press to active snooze function.
TechniSat DigitRadio 110 IR
8
Setup Wizard
1. For initial use, the display will show ‘Setup wizard’ screen.
2. Press or button to confirm ‘YES' to start setup. Options in the setup wizard include the
following:
Date/Time
Set 12 or 24 hour format
Auto update
" Update from DAB
" Update from FM
" Update from Network
Select your time zone and daylight savings is needed.
" No update
Set the date and time is needed.
Keep network connected
Select YES or NO
3. The Wizard will now scan your location for accessible wireless networks. When the scan has
finished, a list of networks will be displayed.
4. Press or button and then press OK button to select a wireless network you wanted.
1) If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code
and display the password entry screen as follows:
# Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to
the network automatically.
DigitRadio 110 IR TechniSat
9
a. Press buttons to cycle through the alphanumeric character list, press OK
button to select an appointed character.
# Note: WEP/WPA pass codes are case-sensitive.
b. If a wrong operation is being conducted, select to delete designated
character.
# Note: = Backspace; means return to previous track; radio will
automatically save the WEP/WPA you’ve input, so no bother to re-enter these
codes.
c. After selecting the final character of your password, press buttons to
, and then press OK button to confirm. The radio is connected to wireless
network.
2) Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the list as
[WPS].
a. If you wish to establish a connection via WPS, press OK button after you have selected
desired network. The radio then offers the option to initiate WPS.
b. Press or button to select through PUSH Button, PIN and Enter Passkey, press OK
button to confirm.
Push Button
You must start the WPS scan on the remote station (e.g. router).
Consult the manual for your router or Access Points (AP) to learn
how to do this.
After you have done this, press OK button on the radio and then
both devices will establish a connection.
PIN
The radio creates an 8-digit number, which you then have to enter
into the remote station.
After entering the PIN, press OK button to establish the
connection between both devices.
Enter Passkey
In addition to a WPS connection, you can also establish a
connection using a Pre-Shared-Key. The required key is often on
the rear of the router, or you may have defined it yourself.
This method is used automatically for networks without WPS. You
can call up the Pre-Shared-Key function on networks with WPS by
selecting menu item “Enter Passkey”.
An input field should now appear. You can enter the required key
(PSK) by pressing buttons and press OK button, and
then select “OK” and press OK button complete the entry. The
radio should now establish the connection to the network.
5. Setup wizard completed, press OK button to exit.
Loading...