Teac LCD2633A, LCD3733A, LCD4233A, LCD3233A User Manual

LCD2633A/LCD3233A LCD3733A/LCD4233A

TEAC

WARRANTY REGISTRATION

Please read this warranty card.

Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.

Warranty Terms & Conditions

1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and workmanship under normal domestic use and authorises free service during the warranty period at any TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in Australia.

2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods Table from the date of purchase.

3. All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be repaired or replaced at the sole judgement of TEAC.

4. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as cleaning VCR heads etc.)

5. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered with, altered or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.

*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual

6. In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this warranty certificate and of your purchase receipt must be enclosed to be a valid warranty. Such equipment or parts must be sent freight prepaid to the nearest authorised TEAC Service Centre. After the repair, the unit will be available for collection by the owner or it will be returned to the owner. The warranty does not cover freight or insurance. In all cases of in-transit damages or loss, a claim must be filed against the carrier by the purchaser.

7. In home service will only be provided as part of this warranty if all the following conditions are met;

a) The product is a Colour Television of 51cm screen size or over. b) The product is within the warranty period.

C) The product is located within the normal service area of the local TEAC Service Provider. In any other situation or circumstance, where an in home service call is made, a service fee will be charged by the Service Provider.

8. TEAC National Service Centre in home service and installation is available at competitive rates.

9. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.

10. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted

operations or other causes.

11. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,

TEAC PRODUCT WARRANTY PERIOD

Televisions / Plasma 106 cm and above

LCD televisions 56cm and above 1 Year (In-Home Service Included)

Televisions 51cm and above 1 Year (In-Home Service Included)

Televisions under 51 cm 1 Year (No In-Home Service)

Digital Set Top Boxes 1 Year (No In-Home Service)

VCR 1 Year (No In-Home Service)

DVD 1 Year (No In-Home Service)

DVD Recorder 1 Year (No In-Home Service)

Audio Systems 1 Year (No In-Home Service)

* Extended promotional warranty may apply to certain products (for more info

service@teac.com.au) In home service administration fee is applied after 1st year of warranty.

1 Year (In-Home Service Included)

please contact:

WARRANTY REGISTRATION

Please keep this information for your own records.

Please refer to the owner’s manual to ensure that you have followed the correct installation and operating procedures.

1. Read owner’s manual carefully

2. If you require Warranty Service, please contact the TEAC Service Centre

3. Please have your purchase receipt as your proof of purchase and the following details completed for a valid Warranty.

Owner’s Name

Owner’s Address

Postcode

Model Name/No. Serial No.

Dealer’s Name

Dealer’s Address

Postcode

4 Please ensure that your product is packed appropriately upon return to the service centre..

If you have any other queries regarding service or warranty please contact the TEAC National Service Centre below.

service@teac.com.au

www.teac.com.au

1800 656 700

Contents

Safety Precautions

Important Safety Instructions

Important User Guidance Information

Stand Uninstall

Accessory List

Overview of TV

i. Front Panel Description

ii.Back Panel Description

Remote Control Overview (All Functions Except Teletext)

Remote Control Overview (Teletext Functions)

Remote Control Operation

Connection

i. Antenna Connection

ii.YPbPr/YCbCr (component) Connection

iii.Rear S-Video and Video (Composite) Connection

iv.Side S-Video and Video (Composite) Connection

v. HDMI Connection

vi. VGA Connection

vii. AV Out Connection

Basic Operation

Button Instruction

i. Picture Menu

Ii. Sound Menu

iii. Channel Menu iv. Window Menu v. Setting Menu

Teletext

Troubleshooting And Maintenance

Display Mode

Specifications

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the unit's cabinet that may be of sufficient magnitude to constitute a risk of electric shock to

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

WARNING:

To prevent fire or electric shock, do not expose the unit to rain or moisture. never attempt to open the cabinet, dangerous high voltages are present in the unit. refer servicing to qualified service personnel.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

When in use, there must be a distance at least 5cm between the TV and some object front or back of it, at least 1cm between the TV and some object leftward or rightward of it .

CAUTION:

DON’T PLACE TO WET LOCATION

Apparatus shall not be exposed to dripping or splashing with water, and do not place objects filled with liquids on the apparatus, such as vases.

NOTE TO CABLE/TV INSTALLER:

This equipment has been tested and found to comply . These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential installation.

Australia regulation standard

Do not attempt to modify this product in any way without written authorization from TEAC Unauthorized modification, warranty will be

void.

RECORD YOUR MODEL NUMBER (Do this now, while it is convenient)

The model and serial number of your Machine are located on the back of the TV cabinet. For your future convenience, we suggest that you record these numbers here:

MODEL NO._____________________ SERIAL NO._____________________

-1-

Important Safety Instructions

1.Read These Instructions All the safety and operating instructions should be

read before the product is operated.

2.Keep These Instructions The safety and operating instructions should be

retained for future reference.

3.Adhered to all warning All warnings on the product and in the operating

instructions should be adhered to.

4.Follow All Instructions All operating and use instructions should be followed.

5.Do not use this product near water Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

6.Clean only with dry cloth Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use dry cloth for cleaning.

7.Do not block any ventilation openings. Install in accordance with the manufacturer instructions.

8.Do not install near any heat sources such as radiators, heat register, stoves, or other apparatus (including amplifiers) that produce heat

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, please take caution when moving the cart to avoid injury from tip-cover.

13.Unplug this apparatus during lightning or unused for a long period of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades ,one blade is wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments and accessories specified by the manufacturer.

15.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

16.Protective Attachment Plug -The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

-2-

Important Safety Instructions

17.Power Lines An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal

18.Overloading Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any kind of liquid on the product.

20.Replacement Parts When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.Outdoor Antenna Grounding If an outside antenna or cable system is connected

to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below.

21.Safety Check Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22.Wall or Ceiling Mounting The product should be mounted to a wall or ceiling

only as recommended by the manufacturer. Any mounting of the product should follow the manufacturer instructions, and should use a mounting accessory recommended by the manufacturer.

-3-

Important User Guidance Information

In order to obtain maximum enjoyment from this TEAC LCD Display System, please first read this

information carefully. With the TEAC LCD, you can be assured of a high quality LCD Display System

with long-life and high reliability. To achieve images of exceptional quality, this TEAC LCD Display System incorporates state-of-the-art design and construction, as well as very precise and highly advanced technology.

Installation guidelines

The TEAC LCD Display System incorporates a very thin design. To ensure safety, please take the proper measures to mount or install the LCD Display with the recommend mounting Base (on next page), in order to prevent the unit from tipping over in the event of vibration or accidental movement. This product should be installed by using only parts and optional accessories designed by TEAC. Use of accessories other than the TEAC stand or installation wall bracket may result in instability, and could cause injury. For custom installation, please consult the dealer or TEAC service centre. To ensure correct installation, experienced and qualified experts must install the unit. TEAC will not be held responsible for accident or damage caused by the use of parts and accessories manufactured by other companies. To avoid malfunction and overheating, make sure that the vents on the main unit are not blocked when installing to ensure proper heat emission:

• Distance the unit slightly from other equipment.

• Do not mount the unit flush against the walls, etc.As show below.

• Do not fit the unit inside narrow spaces where ventilation is poor.

• Do not cover with a cloth, etc.

• Clean the vents on the sides and rear of the unit to remove dust build-up, by using a vacuum cleaner set to its lowest suction setting.

• Do not place the product on a carpet or blanket.

• Using the unit without proper ventilation may cause the internal temperature to rise, and could result in possible malfunction. Any malfunction may occur due to: an inappropriate installation site, improper assembly, installation, mounting. However, TEAC cannot be held responsible for such accidents or malfunction.

• CAUTION regarding Placement To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to or greater than: Left and right Panels : 10cm Rear Panel : 5cm Top Panel :10cm The ventilation should not be impeded by covering the ventilation slots with items, such as newspapers, table-cloths, curtains, etc.No naked flame sources, such as lighted candles, should be placed on the apparatus.

-4-

Stand Uninstall

Please follow the instructions given.

1.Lay the LCD TV/Monitor face-down on a flat surface with a cushion or other soft materials to protect the screen.

2.Remove all cables connected on the TV/Monitor.

3.Remove the four screws and then remove the stand from the LCD TV/Monitor.

4.Now you are ready to install Wall mounting device (Optional).

-5-

Accessory List

Please check the accessories and ask the local dealer for help when they are lost or damaged.

STANDBY

MUTE

SOURCE

LAST SOURCE

DISPLAY

EXIT

TXT/MIX

PICTURE SOUND

ASPECT

User's manual

SLEEP

LIST

FREEZE

VIDEOOFF

CH+

VOL

CH-

PAGE

Power Cord (×1)

User’s manual (×1)

Remote control (×1)

Note: Please use the power cord which includes the ground wire.

This TV set shall be connected to a main socket outlet with a protective grounded AC power outlet.

Where to place the TV

1. Selecting where to place the TV.

2. Handling the TV.

2 inches (5 cm) or more

(Picture A)

(Picture B)

Caution:

• Select a place without direct sunlight or good ventilation

Picture A)

(

• Do not remove the stand from the display unless using a proper wall mount.

• Keep enough space above and behind the TV.

Picture B)

(

• The TV is heavy, make sure to move it safely.

-6-

Front Panel Description

Overview of TV

Speaker

Remote control sensor

Standby indicator

SOURCE

Press it to display the menu of the available viewing source.

Press it to display the OSD menu.

CH+/-

Press it to choose the channel. The two buttons also act as direction buttons .

5 6

VOL+/-

Press it to adjust volume . The two buttons also act as direction buttons .

POWER Power on/off the TV.

-7-

+ 25 hidden pages