HDB850
High Definition Digital Receiver
1
Table of contents
1. General Information -------------------------------------------------------------------------------------------------2
1.1 Important Safety Instructions -------------------------------------------------------------------------------------2
1.2 Accessories -----------------------------------------------------------------------------------------------------------2
2. Control and Functions ---------------------------------------------------------------------------------------------3
2.1 Remote Control Unit ------------------------------------------------------------------------------------------------3
2.2 Front Panel ------------------------------------------------------------------------------------------------------------4
2.3 Rear Panel -------------------------------------------------------------------------------------------------------------4
2.4 Installation of receiver ----------------------------------------------------------------------------------------------5
2.5 Main Features --------------------------------------------------------------------------------------------------------5
3. Unit Operation ---------------------------------------------------------------------------------------------------------6
3.1 Installation Guide ----------------------------------------------------------------------------------------------------6
3.2 Channel Search ------------------------------------------------------------------------------------------------------6
3.3 Program ----------------------------------------------------------------------------------------------------------------6
3.4 Picture ------------------------------------------------------------------------------------------------------------------7
3.5 Timer --------------------------------------------------------------------------------------------------------------------7
3.6 Option -------------------------------------------------------------------------------------------------------------------8
3.7 System ------------------------------------------------------------------------------------------------------------------8
3.8 USB ----------------------------------------------------------------------------------------------------------------------9
3.9 Timer Shift ------------------------------------------------------------------------------------------------------------11
3.10 Record ---------------------------------------------------------------------------------------------------------------11
3.11 Scheduled Recording --------------------------------------------------------------------------------------------11
4. Troubleshooting ----------------------------------------------------------------------------------------------------12
5. Specifications -------------------------------------------------------------------------------------------------------13
1. General Information 2. Control and Functions
1.1 Important Safety Instructions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use,
servicing and maintenance of this device. Please read this manual carefully and keep it for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any of the ventilation openings. Install in accordance with the manufacturer's
instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves or other devices
(including amplifiers) that produce heat.
8. Do not defeat the purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your power outlet, consult an electrician to replace the power socket.
9. Do not bend the power cord excessively. Prevent the cord from being walked on or pinched by
weights placed on it.
10. Only use the attachments/accessories specified by the manufacturer.
11. Do not touch the power plug or switches with wet hands.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way.
This symbol indicates that dangerous voltage instituting a risk of electric shock is
present within this device.
This symbol indicates that there are important operation and maintenance instructions
in the documentation accompanying this device.
NOTE:
! To prevent damage which may result in fire or hazards, do not expose the device to rain or liquids.
! Do not place objects containing liquids, such as vases on the device. If drinks and liquids have been
spilled on the device, unplug the device from AC power immediately and contact the TEAC
Customer Hotline for assistance.
! Servicing of this device should be conducted by qualified and certified TEAC service personnel.
! The manufacturer will not be held responsible for any damage caused by modifications done on the
device without authorisation from the manufacturer's authorised service agent.
1.2 Accessories
4.Quick start guide
1.Remote Control
5.Contact card with serial number
2.AAA batteries for remote control x2
6.AV cables
3.User manual
2 3
2.1 Re mo te C ontro l Un it
Turn on/off the STB
Hot key for USB function
Show the main menu on the screen or jump back to previous menu
from sub-menu
Enable or disable the audio output
Select channels or enter programming
Exit from the current menu and stop adjusting settings
Confirm the selected item in the menu screen or show the channel list
Channel change or move cursor up or down
Volume Control or move cursor left or right
Display the TV/Radio programme Guide
Display the favourite list
To set the R/L speaker output and change the Audio Language
(if available)
To display channel status or various program information of
current channel
Switch to the last viewed channel
Zoom in the selected picture
Switch to subtitle mode
Record current channel
Pause or resume play
Stop playback or recording
Fast forward
Fast backward
Switch to next Item
Switch to previous Item
Hot key for PVR file list
To locate a position to play in multimedia playback
To display the schedule plan
Switch between different screen aspects(4:3 and 16:9)
To start A-B looping playback during video playback: Press this button
once to mark Point A. Press again to mark Point B. Points A to B will
be looped until PLAY or STOP is pressed.
Switch between the different resolutions
1.POWER
2.TV/USB
3.MENU
4.MUTE
5.0-9
6.EXIT
7.OK
8.CH+/CH-(▲)(▼)
9.VOL+/VOL-(▶)(◀)
10.EPG
11.CH.FAV
12.AUDIO
13.INFO
14.RECALL
15.ZOOM
16.SUBTITLE
24.REC LIST
25.GOTO
26.SCH.LIST
27.ASPECT
28.A-B
29.FORMAT
17.
18.
19.
20.
21.
22.
23.
1
4
2
3
5
6
7
14
13
22
23
10
8
9
21
20
11
24
16
17
18
28
25
12
27
29
19
26
15
Specifications
Troubleshooting
Unit Operation
Control and Functions
General Information
Specifications
Troubleshooting
Unit Operation
Control and Functions
4 5
2.3 Re ar P an el
FUN CTION
Con nect to t erres trial a ntenn a
RF si gnal lo op out
Con nect to t he TV’s C VBS por t
Con nect to t he TV’s a udio po rt
Con nect to T V' s Y/P r/ Pb p ort s
Con nect to T V’s HDM I po rt
Con nect to t he TV for d ig it al au di o ou tput
CON NECTO R
1.R F IN
2. RF O UT
3. VI DEO
4. AU DIO R /L
5. Y/ Pb/ Pr
6. HD MI
7. CO AXI AL
2.4 Installation of receiver
The receiver can be connected using the example in the figure below. Possible connections from the
unit to your TV are: AV, Composite, HDMI. When connecting external equipment to the unit, please
refer to the documentation relevant to the external equipment for information on correct installation.
2.5 Main Features
! Fully compliant with DVB-T standard
! Green Power(Standby<0.5W or <1W) supported
! 1080p/1080i/720p/570p/480p/576i/480i YPbPr/RGB component output supported
! HDMI 1.3 transmitter output interface with embedded or external HDCP key
! Resolution up to 1080p@60Hz
! PVR function supported,recording TV and playback media files with external storage devices (USB
stick / USB HDD)
! Supporting pictures with JPEG,BMP,PNG
! Supporting music files with WMA、MP3、AAC (.wma, .mp3, m4a)
! Supporting movie files with MPEG1/MPEG2/H.264/VC-1/Motion JPEG
(.flv/.rm/.rmvb/.avi/.mpg/.dat/.vob/.mov/.mkv/.mjpeg/.ts/.trp)
! Capable of playing picture and music at the same time
TV A er ia l
Tele vi si on
Am pl if ie r
2.2 Fr on t Pa nel
KEY
FUN CTION
Tur n on/of f re cei ver
Cha nnel ch ange( Up/Do wn)
Con nect a co mpati ble USB m emory d evice f or
rec ordin g and pla yback
Dis plays t he time o r other r eleva nt info rmati on
US B po rt
LE D di sp lay
1.
2.
3.
4.
1
2
3
4
1
2 6
3
7
4
5
Specifications
Troubleshooting
Unit Operation
Control and Functions
Specifications
Troubleshooting
Unit Operation
Control and Functions
3. Unit Operation
6 7
3.1 Installation Guide
During initial setup, the installation guide menu will appear on-screen.
! Press Up and Down to select and setup OSD Language, Country;
! Press Left or Right to select the desired option for OSD Language
and country;
! Press OK to Auto Search channels(recommended) or press MENU to
enter main menu.
3.2 Channel Search
Press MENU, then press Right/Left to chose 'Channel Search', press OK
to enter this menu to do channel search, press EXIT to quit;
! Press Up and Down to chose 'Country', then press Left and Right to
change country option if necessary;
! Press Up and Down to chose 'Antenna Power', then press Left and
Right to turn On or Off; if there is antenna with amplifier, please set
On, otherwise set Off;
! Auto Search
Press Up and Down to chose 'Auto Search', then press OK to enter
Auto Search function to scan for all local channels.
! Manual Search
Press Up and Down to chose Manual Search, then press OK to enter
Manual Search function.
a. In 'Channel No.', press Left or Right to chose a channel, or
b. In Frequency, enter the frequency value directly and in Bandwidth,
press Left or Right to set a desired bandwidth to scan for a channel
When a channel is selected, if there is enough signal, it will be
indicated in the Quality bar. Then press OK to confirm search.
3.3 Program
Press MENU, then press Right/Left to chose 'Program', press OK to
enter this menu to edit channels, press EXIT to quit;
In this menu, press Up and Down to chose Program Edit, EPG, Sort,
LCN items as desired.
3.3.1 Program Edit
In this menu, channels can be edited as follows (mark one or more
channels with Red key, and move to new position, press OK to confirm):
! Move(Red key): change channel positions;
! Skip(Green key): skip one or more channels;
! Lock(Yellow key): lock one or more channels to password access
only;
! Delete(Blue key): Delete one or more channels;
! Fav(Fav key): Mark one or more channels as favourite channels;
! Rename(Recall key): rename a channel;
! 3.3.2 EPG
EPG allows channel and programme list navigation, as well as other
options including detailed programme information, starting and end
times for all available programmes up to 7 days in advance and allows
scheduling of programme recordings.
! EPG can be entered by pressing the EPG key;
! Press the Left and Right key to switch between channels;
! Press Up and Down key to select an event in the left frame;
! Press Yellow or Blue key to Page up and down for detailed
programme information;
! Press OK key to book selected event for viewing or recording;
! Press Info key for Book List to edit scheduled events.
3.3.3 Sort
Use this option to sort the channel list according to your desire.
Press Left and Right key to chose to sort by Service ID, Service Name, ONID, LCN.
3.3.4 LCN
Press Left and Right key to turn On or Off for LCN Sorting. If LCN is turned on, programmes will be
listed according to their LCN.
3.4 Picture
Use this menu to set up Aspect Ratio, Resolution, TV Format options. Press Up and Down to select an
item, press OK to enter an item's option selection.
3.4.1 Aspect Ratio
There are several options to choose from:
Auto, 4:3 Full, 4:3 Letter Box, 4:3 Pan&Scan, 16:9 Wide Screen, 16:9
Pan&Scan, 16:9 PillarBox;
Press Left and Right to chose and press OK to confirm.
3.4.2 Resolution
Press Left and Right to chose and press OK to choose the following
options: 480i(NTSC), 480p(NTSC), 576i, 576p, 720p, 1080i, 1080P
3.4.3 TV Format
Press Left and Right to chose and press OK to confirm following options:
PAL, NTSC.
3.5 Time
Use this menu to set up time zone, time offset, sleep time etc.
Press Up and Down to select an item, press OK to enter an item's option
selection.
3.5.1 Time Offset
! Time offset can be set to Auto or Manual. Press Left and Right to
chose and press OK to confirm your choice.
! When Auto is chosen, Country Region needs to be confirmed, press
Left and Right to chose and press OK to confirm the option.
! When Manual is chosen, Time Zone needs to be confirmed, press Left and Right to chose and
press OK to confirm the option.
Specifications
Troubleshooting
Unit Operation
Specifications
Troubleshooting
Unit Operation
8 9
3.5.2 Sleep
! Sleep can be turned On or Off; When it is On, the unit will turn itself off automatically if no buttons
have been pressed on the panel or remote for a certain amount of time.
! Press Left and Right to chose and press OK to confirm the following options: Off, 1~12 Hours.
3.6 Option
Use this menu to set up OSD Language, Subtitle Language, Audio Language, Digital Audio and Audio
Description etc. Press Up and Down to select an item, press OK to enter its option selection.
3.6.1 OSD Language
Press Left and Right to chose and press OK to confirm following options:
ENGLISH, CZECH, DANISH, FRENCH, GERMAN, ITALIAN, PORTUGUESE, SPANISH,
SWEDISH,RUSSIAN etc.
3.6.2 Subtitle Language
This item can be set to On or Off to turn on or off subtitle display on screen. Press Left and Right to
chose and press OK to confirm.
3.6.3 Audio Language
Press Left and Right to chose and press OK to confirm audio language
type available in the programme.
3.6.4 Digital Audio
Press Left and Right to chose and press OK to confirm digital audio
format:
Off, PCM, RAM HDMI On, RAM HDMI Off.
3.6.5 Audio Description
3.7 System
Use this menu to set up Program Block, Restore Factory Default,
Information, Software Update functions. Press Up and down to select a
item, press OK to enter a item's setup or operation.
3.7.1 Block Program
Blocked channels trigger a password prompt. The channel is viewable
only after the correct password is keyed in.
Default password is 000000.
Press Left and Right to chose and press OK to confirm Programme
parental control level:
Block off, P and above, C and above, G and above, PG and above, M
and above, MA15 and above,AV15 and above, R and above, Block All
etc.
Press Left/Right keys to adjust the volume level.
Note:
Audio description refers to an additional narration track for the blind and visually impaired consumers
of visual media. It consists of a narrator talking through the presentation, describing what is happening
on the screen during the natural pauses in the audio, and sometimes during dialogue if deemed
necessary. This function only can be activated when a programme contains an additional narration
track.
3.7.2 Set Password
To set a new password, the old password must be input first. After the
password is verified, key in the new password twice to confirm.
If the password is forgotten, you can use the master password 888888
to reset your password.
3.7.3 Restore Factory Default
This operation will reset the unit to factory default settings and remove
all channels and user preferences. A password is needed to activate
this operation.
3.7.4 Information
This item shows information about the unit's model, software version,
hardware version.
3.7.5 Software Update
To update software via USB, download and copy the updated software
to a USB memory stick's root directory. Then plug it in and enter this
menu. Press up and down to select the updated sofware
usb_upgrade_all_flash.bin, and press OK to start the updating process.
During updating, do not power off the unit.
After updating software, it's recommended to restore factory default and
reboot STB.
3.8 USB
In this menu, user can activate or set up multimedia, photo configure,
movie configure, PVR configure.
Press Up and Down to select an item, press OK to enter its operation
or setup.
3.8.1 Multimedia
There are four functions to choose before playback:
Music, Photo, Movie, PVR (playback recorded programmes).
Press Left and Right to chose and press OK to activate a function.
!Music
Press Up and Down to chose a music file. Press OK to play, press
Recall to return.
! Photo
Press Up and Down to chose a Photo file to preview. Press OK to play,
press Recall to return.
Press the Play key to view all pictures in a slide show, press Recall to return to thumbnail view.
! Movie
Press Up and Down to chose a movie file, press the Red key to preview, press OK to full screen, press
Recall to return.
The unit will only support a USB
de vi ce w it h a FAT3 2 fi le s ys te m. I t wi ll n ot s up po rt N TF S fi le
sy st em .
Specifications
Troubleshooting
Unit Operation
Specifications
Troubleshooting
Unit Operation
10 11
!PVR
Press Up and Down to chose a recorded file, press the Red key to preview, press OK to full screen,
press Recall to return.
Press Up and Down to chose a recorded file, press Yellow key to delete, press Green key to rename.
! Resume Playback
Res um e pl ay ba ck f ro m wh er e it w as s to pp ed for a numb er o f re ce nt ly p la ye d tr ac ks . Wh en t he
me ss ag e ap pe ars on the scre en , ch oo se R es um e to d o th is , or E xi t to c an ce l. T he l as t track to
be p layed i s hi gh li gh te d in g re en .
3.8.2 Photo Configure
In this menu, there are three options to setup photo playback style and
mode:
Slide Time: Set up time interval for slide play;
Slide mode: Random,0~59(transition styles);
Aspect Ratio: Keep (reserve picture original aspect) or discard (full
screen);
Press Left and Right to chose and press OK to configure a option.
3.8.3 Movie Configure
In this menu, there are three options to setup movie playback subtitle
display method:
Subtitle Specific: NORMAL, BIG, SMALL(Set up subtitle font size);
Subtitle BG: Transparent, Gray, Yellow, Green, White(Set up subtitle
background);
Subtitle FontColor: White, Black, Red, Blue, Green;
Press Left and Right to chose and press OK to configure a option.
3.8.4 PVR Configure
In this menu, there are two items to setup or display USB memory
device's information:
Record Device: Set up record USB memory device and timeshift size;
Format: Format USB memory device;
Press Up and Down to chose a item, and press OK to enter the item.
! Record Device
Disk: Press Left and Right to chose a USB memory device's disk.
Timeshift Size: Press Left and Right to configure time shift memory
size(0.5/1/1.5/2.0/2.5/3.0/3.5/4.0GB).
! Format
Format: Press Left and Right to chose a USB memory device's disk to be formatted.
File System: Press Left and Right to chose a file system(NTSC/FAT32) to be formatted.
After setting the format configuration, select Format and press OK to confirm and start the format
operation. Press OK to continue, press Exit to cancel.
NOTE:
! Form att ing wil l erase al l data on t he hard d isk. Pl ease ba ck up all v aluab le data b efore fo rmatt ing a dis k. TEAC d oes not
tak e any res ponsi bilit y for l oss of da ta.
! To obtai n maxim um perf orman ce for PV R funct ions, a U SB 2.0 de vic e is requ ired. P lease u se a dedi cated U SB devi ce fo r
PVR f uncti ons. Do n ot edit r ecord ed file s on a PC. Be fore usi ng the US B devic e for the f irst ti me, ple ase for mat it. A ll data w ill
be lo st when f ormat ting, p lease e nsure t hat a ll valu abl e data is n ot with in the US B devic e.
NOT E:
! TEA C canno t guara ntee co mpati bility ( opera tion an d/or bu s power ) with al l USB mas s stora ge devi ces and T EAC hol ds no
res ponsi bilit y for any lo ss of dat a that ma y occur w hen con necte d to this u nit.
! W ith lar ge amou nts of da ta, it ma y take lo nger for t he syst em to rea d the con tents o f a USB dev ice.
! S ome USB d evice s and ext ernal h ard dri ves may n ot be pro per ly reco gnize d.
! E ven whe n they ar e in a supp orted f ormat , som e files m ay not pl ay or dis pla y depen ding on t he cont ent.
3.9 Time Shift
Time shift, also known as pause live TV, is to pause a broadcast programme to continue to watch it
later.
To use this function, the user should plug in a USB memory device first.
To activate time shift, press Pause key while watching TV. This will pause the TV picture and sound
and begin recording the programme temporarily.
To resume watching a time shifted programme, press Play key to play, the paused programme will play
from the paused point.
Time shifted programmes can be fast forwarded at speeds of x2, x4, x8, x16, x32, by pressing the Fast
Forward key during time shift playback. If fast forwarding reaches the end of the recorded track, time
shift will exit.
To stop time shift playback and return to live TV, press the Stop key.
3.10 Record
You can record a programme and save it as a PVR video file to watch it
later. To use this function, plug in a compatible USB memory device first.
To start recording, press the REC key while watching TV.
During a recording, changing programmes is only allowed within the
same frequency.
To stop recording the programme, press the Stop key.
To access recorded files, press the REC LIST key, or go from menu
USB--multimedia-- PVR.
NOTE:
! During recording you are able to view other sub-channels
broadcasted on the same frequency. If you try to change frequency, a
message will appear asking you to confirm and end the recording or
cancel.
! If the unit is on Standby mode, the scheduled recording will still
proceed without the need to switch on the TV. You are also able to switch on the TV midway
recording and proceed to view the program that is being recorded.
3.11 Scheduled Recording
You can book programs for recording when a USB deice is connected to the USB socket on the front
panel.
Enter EPG by pressing the EPG key. Select the program you wish to record using the LEFT/RIGHT
keys and the UP/DOWN keys to highlight the program.
Press the OK key to book the highlighted program for recording. A schedule window will appear that
allows you to adjust the recording parameters as follows:
Channel type: Select the recording for TV or Radio.
Channel Number: Specify the channel by number.
Name: This displays the name of the channel selected above, can only be changed by selecting
another channel number.
Start Date: Select the starting date of the recording in DD/MM/YYYY format.
Start Time: Set the start time for the recording in HH:MM
End Time: Set the end time of the recording HH:MM
Repeat: You can select how often you would like the recording to occur:
Once/Daily/Weekly
Mode: You can select RECORD to make the unit record according to your previous settings or select
View to change to another channel at the specified times.
Use the UP/DOWN/RIGHT/LEFT keys to navigate through the schedule window and adjust the
parameters, use the Numeric buttons to enter figures such as dates and times.
Specifications
Troubleshooting
Unit Operation
Specifications
Troubleshooting
Unit Operation
Programs booked for recording will be marked. Any recordings that are to occur daily or weekly will not
be marked due to the static nature of the EPG, however the booked recordings will appear in your
recording schedule in the EPG screen.
While still in the EPG window, press the INFO button to view a list of the programs you have booked
for recording. In normal mode, press the BLUE button to access the record schedule list.
In the record schedule list you can add (RED button), Edit (GREEN button) or Delete (BLUE button)
schedules on the list. Press EXIT to exit the record schedule list.
NOTE:
! During recording you are able to view other sub-channels broadcasted on the same frequency. If you try to change
frequency, a message will appearasking you to confirm and end the recording or cancel.
! If the unit is on Standby mode, the scheduled recording will still proceed without the need to switch on the TV. You
are also able to switch on the TV midway recording and proceed to view the program that is being recorded.
Once the program has been set to record, you can view a list of programs scheduled for recording by pressing the
BLUE key on the remote control.
4. Troubleshooting
Pro blem
Pos sible C auses
Wha t To Do
No display light up on front panel
No sound or picture, but the front
panel LED Display is OFF
No sound or picture
Bad picture/Blocking Error
No picture(Video)
No picture(Video)
There is interference on your digital
channel.
The RCU is not working.
Power Cord is not firmly plugged
The unit is in standby mode
The external antenna is not installed
properly
No signal or weak signal
Signal is too strong
The system is connected by AV cable
and TV is not in AV/EXT mode.
The system is connected by RF
cable and TV is in TV mode.
The system is connected using RF
cable and the output channel of the
receiver interferes with an existing
terrestrial channel or video signal.
Out of battery
RCU is aimed at wrong direction
Check to make sure power cord is
plugged properly into power socket
Press the standby button.
Adjust the antenna. Check the
Signal Level in the Channel Search
Menu
Check the cable connections,
antenna and other equipment
connected between the receiver and
antenna. Use an RF amplifier for the
external antenna to improve signal.
Connect a signal attenuator to the
RF input
Switch TV to AV mode
Check the VHF/UHF channel fixed in
your system and tune the VHF/UHF
properly.
Change the receiver output channel
to a more suitable channel or
connect the system using another
AV cable.
Change the battery
Aim the RCU at the unit, and remove
obstacles between the front panel
and RCU
Note: If you still cannot resolve the problem with above reference, please contact TEAC Support Hotline 1300 553
315.
5. Specification
TRANSMISSION STANDARDS
DVB-T,MPEG-2,MPEG-4,H.264
DVB-T RF INPUT/DEMODULATION
Connector Type
Input Frequency
Bandwidth
Signal Input Level
Input Impedance
ANT Power
Demodulation scheme
Code Rate
Guard Interval
Transmission Mode
Reed Solomon
Demodulation Type
AV output interface
Video Output
Audio output
AUDIO/VIDEO PROCESSING
Video decompression
Resolving rate
Signal compatability
Video Format
Audio decompression
Audio output mode
DATA SERVICE PORT
Connector
Data protocol
MEDIA FEATURES
Picture
Music
Movie
File management system
POWER SUPPLY
Type
AC Input for adapter
Power consumption
Insulation resistance
Standby Voltage/Hi-Pot
Temperature Rise
Safety Standard
IEC-FeMale x1 for RF input, IEC-Male x1 for RF Loop
(UHF)470~862MHz,(VHF)170~230MHz
6,7,8MHz
-78~-10dBm
75Ohm
5V(On/Off),Imax=50mA
QPSK,16-QAM,64-QAM
1/2,2/3,3/4,5/6 or 7/8
1/4,1/8,1/16 or 1/32
2k or 8k
204,188,t=8
COFDM,fully compliant with DVB-T Standard
HDMI, RCA for CVBS/YPbPr
Stereo Audio L/R output interface by RCA,Coaxial for S/PDIF
MPEG-2 MP@HL, ITU-T H.264 MP&HP@L4.1, VC-1 MP@HL and AP@L3,
up to 1080p@30fps; Option for RealMedia Decoder, up to 720p@30fps;
HW JPEG decoding
PAL-25 frame@720*576 and NTSC-30 frame@720*480 for CVBS output,
1080p/1080i/720p/570p/480p/576i/480i for YPbPr/ RGB component output,
HDMI up to 1080p@60Hz
Support conversion for different video formats and frame rates
4:3,16:9,By Pan & Scan and Letter Box conversion
MPEG-1,MPEG-2(Layer I/II),MP3,WMA, AAC-LC, Option for AC-3, E-AC-3
and HE-AAC 5.1 multi-channel decoding
Stereo, Joint stereo, Mono, Dual Mono; HDMI, S/PDIF audio for PCM or RAW
USB
USB2.0 interface
JPEG,BMP,PNG
MP3
AVI, XVID
NTFS,FAT32,FAT16; Copy,delete operations supported
AC mode
100-260VAC@50/60Hz±5%
Max 10W
More than 10MR at 500Vdc,Ambient conditions of 28±2%&70%RH
I/p to O/p:3KV(1 min)
<75 on winding&core;<50 on casting At 264Vac@50Hz
Designed to meet MEPS
12 13
Specifications
Troubleshooting
Specifications
14
Mstar MSD7818(MIPS34K CPU with target speed 550M built in)
4Mbyte
64Mbyte
3 Key for Power On/Off,Up,Down
Option for LED Indicator for Power On/Off
Infra-red receiver
4 Digits 7-segment LED display
1xUSB2.0 interface
2xIEC connector for RF in and RF Loop
HDMI 1.3 interface,up to 1080p
1xAV RCA6(YPbPr,CVBS,L/R)
0.52 KG
0.89 KG
220 x 135 x 40 MM
232 x 243 x 56 MM
MICROPROCESSOR
Microprocessor
Flash
DDRII Memory
PHYSICAL CHARACTERISTICS
Front Panel
Keys
Indicators
Remote Control input
Display
Connections
Rear Panel
Connections
Weight and Dimensions
Net Weight
Gross Weight
Unit Dimensions
Gift Box Dimensions
Specifications
* Subject to change without notice.
* Weight and dimensions are approximate.
Loading...