Tc-helicon GO Guitar PRO User Manual

Quick Start Guide

GO GUITAR PRO

High-Denition Guitar Interface for Mobile Devices

Getting started

Plug the included USB cable into GO GUITAR

PRO’s USB input. Plug the other end of the cab le
into your device’s USB or Lightning connection.

Plug a pair of headp hones into the

headphone input.

Connect a guitar or bass v ia an instrument

cable with a ¼" TS plug.

Connect an amplier to the amp output via an

instrument cable with a ¼” TS connector.

Move the THRU/FX sw itch to the FX position to
hear the proce ssed guitar or bass sound from
the app in your mobile device.

While playing your guitar or bass, turn up the
GAIN wheel until you get the opt imum input level
for the app in your mobile device.

While playing, turn up the VOLUME wheel until
you nd your optimum headphone level.

Download your favorite TC Helicon app to
begin experimenting with guitar and bass eect s.

Specications

Analog Connections

Guitar 1 x ¼" TS mono, unbalanced

Impedance 1 M

Headphones 1 x ⁄" TRS stere o

Amplier out 1 x ¼" TS mono, unbalanced

Digital Connections

Mobile device / computer 1 x USB 2.0, type B mini

A/D conversion 24-bit @ 48 kHz

Controls

Gain 0 to +28 dB, adjustable

Routing Thru / FX, switchable

System

Frequency response 20 Hz to 20 kHz, +0/-1 dB

Dynamic range > 98 dB

Power consumption 0.33 W @ 3.3 V

Working voltage 5 V and 3.3 V

Dimensions / Weight

Dimensions
(H x W x D)

Weight 0.11 kg (0.24 lbs)

92 x 45 x 27 mm
(3.6 x 1.8 x 1.1")

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION

TC Helicon

GO GUITAR PRO

Responsible Party Name: Music Tribe B rands UK Ltd.

Address: Klark Industrial Park,

Walter Nash Road,
Kidderminster.
Worceste rshire, DY11 7HJ England

Phone Number: [phone]

GO GUITAR PRO

This equi pment has been test ed and found to compl y with the limits f or a ClassB digital

device, pur suant to part 15 of the FCC Ru les. These limit s are designed to pro vide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

install ed and used in accord ance with the instr uctions, may cau se harmful inter ference

to radio communications. However, there is no guarantee that interference will not occur

in a part icular installat ion. If this equipm ent does cause har mful interfe rence to radio or

televisio n reception, whic h can be determine d by turning the equ ipment o and on,

the user is e ncouraged to tr y to correct the in terference by on e or more of the

following measures:

LEGAL DISCLAIMER

Music Tribe acce pts no liabilit y for any loss which ma y be suered by any per son who relies
either wholly or in part upon any description, photograph, or statement contained herein.
Technical specications, appearances and other information are subject to change without
notice. All tr ademarks are t he propert y of their respec tive owners. M idas, Klark Teknik,
Lab Grup pen, Lake, Tannoy, Turbosound, TC Ele ctronic, TC Hel icon, Behringer, Buge ra
and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Glo bal Brands Ltd. 2019 All righ ts reserved .

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding
Music Tribe’s Limi ted Warranty, pleas e see complete de tails online at musi ctribe.com.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connec t the equipment into a n outlet on a circui t dierent from t hat

to which th e receiver is connec ted.

• Consult the d ealer or an experi enced radio/T V technician for he lp.

This equi pment complies wit h Part 15 of the FCC Rules. Op eration is subjec t to the

following two conditions:

(1) This device may not c ause harmful inte rference, and

(2) This device mu st accept any inter ference received , including inter ference that may

cause undesired operation.