Users Manual
LED Intelligent Aquarium Lighting System
Before using the system
Before using this LED intelligent system please read
the follow the safety and suggestions listed below.
Keep this manual handy for future reference.
1. Remove any packaging material protecting the
fixture.
2. Never look directly at the LED bulbs when the
system is on as the strong lighting from led bulbs
might cause eye hazard.
3. Restar t the system if meeting the system trouble.
Safety
1. Power Source – DO NOT overlook the safety
purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than
another. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third
prong is provided for your safety. If the plug does n ot
fit into your outlet, consult an electrician to choose
the appropriate outlet.
2. Power Cord Protection – The power supply cords
should be routed to avoid being tripped over or a
pinch spot. DO NOT handle the plug cord fixture if
your hand is wet, and always grasp the plug body
when connecting or disconnecting it.
3. Installation – Install indoor only, and use the
attachments, hanging kit and accessories provided
and specified by the manufacturer.
Operation
1. Operati o n – A lways f o l l o w t he operatio n
instructions set forth in this manual when using this
LED intelligent LED Lighting system.
2. Heat – The product should be used away from heat
sources such as radiators, and do not expose to
excessive heat such as direct sunshine, fire and etc.
3. Moisture – To reduce the risk of fire or electric
shock, do not expose this product to rain, moisture,
dripping or splashing.
4. Ventilation – The product should be installed
properly so that its location or position does not
interfere with its proper ventilation.
5. Magnetism – The product should be used away
from equipment or devices that generate strong
magnetism.
6. Cleaning – Clean only with dry cloth.
TOUCH TO CONTROL
Intelligent System Version 1.0 6
Operating Instructions
Basic Operations
Follow the instructions below to operate and program
the LED Intelligent Lighting.
NOTE：
The LED turns on automatically when power is
connected, and turns off when power is cut.
Touch Pad
1. Right & left & down & up
2. Long touching 'left' LCD on/off.
1. Switch between Sunny, Cloudy, Moon and
OK
Manual Mode
2. Confirm & Long touching Power on/off
Enter & Back to Review
MEN U
Date/Time Setting
MOO N
CUS TOM
MAN UAL
SET TINGS
<
<
<
<
LAN GUAGE
DATE /TIM E
RES ET
INF O
<
<
2013-03-04
<
<
14: 59: 27
MEN U
Enter to the main menu, → ' SETTINGS' →
'DATE/TIME' to set the local time confirm →
Review the time
MEN U
OK
OK
Operating Instructions
Sunny, Cloudy, Moon and Manual Mode Settings
OK
SUN NY
CH- 1: 93
CH- 2: 100
OK
<
<
RES ET TO DEFAU LT
<
<
YES
NO
OK
SUN NY
Enter to the main menu, 'UP' and 'DOWN' →
CLO UDY
MOO N
CUS TOM
MEN U
<
<
<
<
'SUNNY',
'CLOUDY', 'MOON', and 'MANUAL' → intensity of
CH-1(B) & CH-2(W) setting confirm
Factory Setting
MOO N
CUS TOM
MAN UAL
SET TINGS
MEN U
→Enter to the main menu → ' SETTINGS' →
<
<
<
<
'RESET'→ 'YES' or 'NO'→ confirm
LAN GUAGE
DATE /TIM E
RES ET
INF O
OK
Operating Instructions
Default Factor y Mode (1HR&1/2HR)
1/2 HR 1HR
Time CH-1(B) CH-2(W) CH-1(B) CH-2(W) Time CH-1(B) CH-2(W) CH-1(B) CH-2(W)
0:00 0% 0% 12:00 80% 75%
0:30 0% 0%
1:00 0% 0% 13:00 100% 100%
1:30 0% 0%
2:00 0% 0% 14:00 100% 100%
2:30 0% 0%
3:00 0% 0% 15:00 100% 100%
3:30 0% 0%
4:00 0% 0% 16:00 100% 100%
4:30 0% 0%
5:00 0% 0% 17:00 90% 100%
5:30 0% 0%
6:00 0% 0% 18:00 60% 50%
6:30 0% 0%
7:00 3% 0% 19:00 30% 10%
7:30 5% 0%
8:00 8% 0% 20:00 20% 0%
8:30 10% 0%
9:00 15% 0% 21:00 10% 0%
9:30 20% 0%
10:00 25% 5% 22:00 5% 0%
10:30 30% 10%
11:00 45% 20% 23:00 0% 0%
11:30 60% 50%
0% 0%
0% 0%
0% 0%
0% 0%
0% 0%
0% 0%
0% 0%
3% 0%
8% 0%
15% 0%
25% 10%
45% 50%
12:30 90% 100%
13:30 100% 100%
14:30 100% 100%
15:30 100% 100%
16:30 100% 100%
17:30
18:30 45% 20%
19:30 25% 5%
20:30 15% 0%
21:30 8% 0%
22:30 3% 0%
23:30 0% 0%
1/2 HR
1HR
80% 100%
75%
100% 100%
100% 100%
100% 100%
100% 100%
80% 100%
45% 50%
30% 10%
20% 0%
10% 0%
5% 0%
0% 0%
80%
Operating Instructions
Default Factor y Mode Review (1HR&1/2HR)
MOO N
CUS TOM
MAN UAL
SET TINGS
HOU R: 6:00
CH- 1: 0
CH- 2: 0
PRE VIEW
→ main menu → 'CUSTOM', enter to Sub-
MENU
menu → ' PREVIEW' BLINK to scan default setting from
0:00-23:00 automatic. If default setting is ok, the light
would operate according to it. If not, enter the next
Manual setting.
Custom Mode Setting
MOO N
CUS TOM
MAN UAL
SET TINGS
OK
Enter to Sub-menu, → ' STEP' 1H &0.5H, choose
one then , then program would keep the time setting
by 1H/0.5H, →' HOUR' ex: 6 :0 0 then
<
<
<
<
OK
<
<
<
<
<
STE P: 0.5H
HOU R: 6:00
CH- 1: 0
CH- 2: 0
STE P: 0.5H
HOU R: 6:00
CH- 1: 0
CH- 2: 0
STE P: 1H
HOU R: 6:00
CH- 1: 0
CH- 2: 0
OK
STE P: 1H
HOU R: 6:00
CH- 1: 0
CH- 2: 0
OK
Loading...