Sylvania LD195SSX Owner Manual

LD195SSX

Owner’s Manual
Guide d’utilisation
Manual del Usuario

EnglishEspañol Français

NEED HELP?

BESOIN D’AIDE ?

¿NECESITA AYUDA?

PLEASE CALL TOLL FREE!

APPELEZ NOTRE NUMÉRO GRATUIT !

¡LLAME POR FAVOR SIN COSTO!

1-866-321-3927

OR VISIT OUR WEB SITE AT

OU VISITEZ NOTRE SITE WEB À L’ADRESSE

Ó VISITE NUESTRO SITIO WEB EN

www.sylvaniaconsumerelectronics.com

MODEL NUMBER SERIAL NUMBER

HIGH-DEFINITION TELEVISION

TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.

POUR RECEVOIR LE SIGNAL
NUMÉRIQUE /ANALOGIQUE, VOUS
DEVEZ CONNECTER L’ANTENNE.

PARA RECIBIR LA SEÑAL DIGITAL/
ANALÓGICA, DEBE CONECTAR LA
ANTENA.

© 2009 Funai Electric Co., Ltd.

Before You Start

Avant de Commencer

Antes de Comenzar

Connection

Connexion

Conexiones

Initial Setup

Confi guration Initiale

Instalación Inicial

Basic Operation

Opérations de Base

Operación Básica

Before You Start

Avant de Commencer

Antes de Comenzar

Connection

Connexion

Conexiones

Initial Setup

Confi guration Initiale

Instalación Inicial

Basic Operation

Opérations de Base

Operación Básica

Before You Start

Avant de Commencer

Antes de Comenzar

Connection

Connexion

Conexiones

Initial Setup

Confi guration Initiale

Instalación Inicial

Basic Operation

Opérations de Base

Operación Básica

itial Se

Initiale

alación I

cia

l

alación Inicial

Avant de Commencer

Antes de Comenzar

© 2009 Funai Electric Co., Ltd.Printed in China 1EMN24605 ★★★★

Quick Start GuideQuick Start Guide

FR

Guide de Démarrage Rapide

ES

Guía de Inicio Rápido

Need help connecting this LCD TV? Call us at 1-866-321-3927

Vous avez besoin d’aide pour connecter ce téléviseur LCD ? Appelez-nous au 1-866-321-3927

¿Necesita ayuda para conectar esta TV LCD? Llame al número 1-866-321-3927

All of us at SYLVANIA wish you will be very pleased with your unit.



L’ensemble du personnel de SYLVANIA espère que vous serez satisfait de votre appareil.



Todos en SYLVANIA deseamos que esté muy complacido(a) con su unidad.



Channel Selection

Sélection de Chaîne Selección de Canal

- When selecting analog channel 11.

Lorsque vous sélectionnez le canal analogique 11.

Cuando seleccione el canal analógico 11.

- When selecting digital channel 11-1. Be sure to press

before entering the subchannel number.

Lorsque vous sélectionnez le canal numérique 11-1. N’oubliez pas
d’appuyer sur la toucher

avant d’appuyer sur le numéro du
sous-canal.

Cuando seleccione el canal digital 11-1 asegúrese de presionar

antes de indicar el número de subcanal.

Volume Adjustment

Réglage du Volume Ajuste de Volumen

Switch the Input

Changer D’entrée Cambie la Entrada

Or ou o

e.g.) When selecting HDMI1.

ex.) Lorsque vous sélectionnez HDMI1.

p.ej.) Cuando seleccione HDMI1.

Attaching the Stand

Fixation du Support Fijación de la Base

Go on the next page...

Allez à la page suivante…

Pase a la siguiente página…

NoNo NonNon NoNo

A

Do you have any AV device(s) to connect to this unit?

Souhaitez-vous connecter d’autres appareils AV à ce téléviseur ?

¿Tiene algún dispositivo AV para conectar a esta unidad?

Yes Yes UiUi SíSí

1

Connecting the Antenna

Connexion de L’antenne Conexión de la Antena

3

Antenne VHF / UHF Antena VHF / UHF

VHF / UHF antenna

cable TV company

Société de télévision par câble compañía de TV por cable

A

What do I need in this procedure?

De quoi ai-je besoin pour réaliser cette procédure ?

¿Qué necesito para este procedimiento?

An RF coaxial cable (not included)

Câble RF coaxial (non fourni)

Un cable coaxial RF (no incluido)

or ou o

2

1

Plug in the AC power cord, then press .

Branchez le cordon d’alimentation secteur,
puis appuyez sur

.

Enchufe el cable alimentador de CA y presione

.

2

Select your language.

Sélectionnez votre langue.

Seleccione su idioma.

Initial Setup

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Select Enter Skip

SETUP

Español

Français

ENTER

English

3

Select “Antenna” or “Cable”.

Sélectionnez “Antenne” ou “Câble”.

Seleccione “Antena” o “Cable”.

Initial Setup

Initial Setup

Antenna

Cable

Skip

Select Enter Skip

SETUP

Back

BACK

ENTER

Make sure the antenna is connected to "ANT.IN" jack.
Select the destination of "ANT.IN" jack.

Cable

Antenna

Or

ANT.IN

• “Autoscan” will begin.

La “Autoscan” commence.

Se inicia la función “Autoscan”.

4

Select “Retail” or “Home”.

Sélectionnez “Magasin” ou “Maison”.

Seleccione “Tienda” o “Casa”.

Initial Setup

Initial Setup

HomeRetail

Select Enter

ENTER

Select “Retail” or “Home” for your location.

Slide the stand onto the TV until the hook snaps.

Faites glisser le socle sur le téléviseur jusqu’à ce que les
crochets s’enclenchent.

Deslice la base de soporte sobre el TV hasta que el gancho
emboque.

HDMI1

Volume 30

Initial Setup

Initial Setup

Now the system is scanning for channels, please wait.
Autoscan will take up to 20 minutes to complete.

0%

Analog channels 0ch

Digital channels 0ch

SETUP

Skip

!

TV

DTV

Before You Start

Avant de Commencer

Antes de Comenzar

Connection

Connexion

Conexiones

Initial Setup

Confi guration Initiale

Instalación Inicial

Basic Operation

Opérations de Base

Operación Básica

Connection GuideConnection Guide

FR

Guide de Connexion

ES

Guía de Conexiones

Need help connecting this LCD TV? Call us at 1-866-321-3927

Vous avez besoin d’aide pour connecter ce téléviseur LCD ? Appelez-nous au 1-866-321-3927

¿Necesita ayuda para conectar esta TV LCD? Llame al número 1-866-321-3927

Optimize your HD TV experience by properly connecting your components.

Optimisez votre expérience de la télévision haute défi nition en connectant correctement vos composants.

Optimice su experiencia en TV HD conectando correctamente los componentes.

Separate analog audio cable(s) is also required for this connection.

Vous aurez également besoin de câble audio analogiques pour e ectuer ce branchement.

Se requieren también cables separados de audio analógico para esta conexión.

your device has;

votre appareil possède ;

su dispositivo tiene;

jack type is;

le type de prise est ;

el tipo de toma es;

necessary cable is;

le câble nécessaire est ;

el cable necesario es;

HDMI OUT jack

prise de HDMI OUT

toma de HDMI OUT

HDMI cable

Câble HDMI

Cable HDMI

DVI OUT jack

prise de DVI OUT

toma de DVI OUT

DVI-HDMI conversion cable + audio cables

Câble de conversion DVI-HDMI + câbles audio

Cable de conversión DVI HDMI + cables de audio

PC OUT jack

prise de PC OUT

toma de PC OUT

VGA cable + stereo mini-plug audio cable

Câble VGA + câble audio stéréo à mini-jack

Cable de VGA + cable de audio mini-plug estéreo

COMPONENT VIDEO OUT jack

prise de COMPONENT VIDEO OUT

toma de COMPONENT VIDEO OUT

Component video cables + audio cables

Câbles vidéo composant + câbles audio

Cables de vídeo en componentes + cables de audio

S-VIDEO OUT jack

prise de S-VIDEO OUT

toma de S-VIDEO OUT

S-Video cable + audio cables

Câble S-Vidéo + câbles audio

Cable de S-Video + cables de audio

VIDEO OUT jack

prise de VIDEO OUT

toma de VIDEO OUT

Video cable + audio cables

Câble vidéo + câbles audio

Cable de vídeo + cables de audio

DIGITAL AUDIO IN jack

prise de DIGITAL AUDIO IN

toma de DIGITAL AUDIO IN

Coaxial Audio cable

Câble audio coaxial (audio numérique)

Cable coaxial de audio (Audio Digital)

VERY BEST VERY BEST

PICTURE /

PICTURE /

AUDIO

AUDIO

GOOD

GGGGGGOGO

OO

OO

DDDDDDDDDDDDD

PICTURE

PIC

PIC

PIC

PICPIPIPIPIPPPPPPPP

TUR

TUR

TUR

R

EEE

E

STANDARD

PICTURE

BET

TER

BETTER

PICTUREPICTURE

BEST

BEST

PICTUREPICTURE

Image/Audio de
qualité optimale

Máximo imagen e audio

Image d’excellente qualité

La mejor imagen

Image de très bonne qualité

Mejor imagen

Image de bonne qualité

Buena imagen

Image de qualité standard

Imagen estándar

Image de trés grande qualité

Mucho mejor imagen

MUCHMUCH

BETTERBETTER

PICTUREPICTURE

Audio de bonne qualité

Buen audio

The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.

Model No.:

Serial No.:

LD195SSX

 Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacture’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to
operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which
can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY

Trade Name: SYLVANIA Responsible Party: FUNAI CORPORATION, INC.
Model: LD195SSX Address: 201 Route 17 North Suite No. 903 Rutherford, New Jersey 07070 U.S.A.
Telephone Number: 201-727-4560

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

This Class B digital apparatus complies with Canadian ICES-003.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing
on it. A falling unit can cause serious injury or even death.

2

EN

EnglishEspañol Français

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due
to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION:

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the AC power cord with wet hands.

• Do not remove this unit’s cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to
this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

• The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

• Do not install the unit near or over a radiator or heat register.

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

DEW CONDENSATION WARNING

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

NOTE ABOUT RECYCLING

• This unit’s packaging materials are recyclable and can be reused.
Please dispose of any materials in accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.

hazardous radiation exposure.

Inside, near the deck mechanism.

 Trademark Information

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.

• Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

• is a trademark of DVD Format/Logo Licensing Corporation.

3

EN

NTRODUCTION

AA

AA

-2.5°

10°

screw holes



I

 Supplied Accessories

owner’s manual
(1EMN24419A)

• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free
customer support line found on the cover of this manual.

quick start guide
(1EMN24605)

remote control
(NF033UD)

batteries
(AA x 2)

screw kit for attaching
the stand
(1ESA19526)

 Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

TV FUNCTIONS DVD FUNCTIONS

TV

: Analog TV operation

DTV

: Digital TV operation

• If neither symbol appears under the function heading,

operation is applicable to both.

DVD

: Playback of DVD-video

CD

: Playback of audio CD

• If neither symbol appears under the function heading,
operation is applicable to both.

 Attaching the Stand

You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the
proper direction.

Spread a thick and soft cloth over a

1

table as shown below.
Place the main unit face down onto it.
Make sure not to damage the screen.

Align the 2 stand hooks with the two

2

hooks under the bottom of the main
unit (shown by arrow
the stand in the direction as shown
by arrow
mounting holes are aligned. Make
sure not to put the AC power cord
between the stand and the unit.

until it stops and the 3

➁

), then slide

➀



Drive Phillips pan screws in the 3

3

threaded holes at the bottom of the
stand until they are tight.

To remove the stand from this unit

Unscrew the Phillips pan screws indicated by above
“➂” screw holes. After the screws are removed pull

the stand up toward the rear of the unit. Be careful
not to drop the stand when you remove it.

Note:

• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit and is larger than this unit.

• Make sure the table is in a stable location.

 Tilt Stand

You can adjust the stand to change the angle of the unit (-2.5° to 10°).

4

EN

front sidefront side





 Features

EnglishEspañol Français

INTRODUCTION PREPARATION

TV DVD

• DTV/TV/CATV

- You can use your remote control to select
channels which are broadcast in digital format and
conventional analog format. Also, cable subscribers
can access their cable TV channels.

• Information Display (DTV only)

- You can display the title, contents and other
information of the current DTV program on the TV
screen.

• Autoscan

- This unit automatically scans and memorizes
channels available in your area, eliminating difficult
setup procedures.

• Child Lock

- This feature allows you to block children’s access to
inappropriate programs.

• Closed Caption Decoder

- Built-in closed caption decoder displays text for
closed caption supported programs.

• MTS/SAP Tuner

- Audio can be selected from the remote control.

• Auto Shut Off Function

- If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
off automatically.

• Sleep Timer

- This feature will automatically turn off the power of
the unit at a specific time.

• Choices for On-screen Language

- Select your on-screen language:
English, Spanish or French.

• Stereo Sound Function

• PLL Frequency Synthesized Tuning

- Provides free and easy channel selection and lets
you tune directly to any channel using the number
buttons on the remote control.

• Various Adjustment for Picture and Sound

- Customizes image quality to suitable for your room
and sets the sound as your preference.

• HDMI Input

• Component video Input

• PC Input

• S-Video Input

• AV Input

• Digital audio Output

• Headphone Jack

• Dolby Digital Sound

- Enjoy Dolby Digital multi-channel surround sound
when you connect the unit to your Dolby Digital
decoder.

• Still / Fast / Slow / Step Playback

- Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.

• DVD Menus in a Desired Language

- You can display DVD menus in a desired language, if
available on a DVD-video.

• Auto Power Off

- If there is no operation for 20 minutes, the unit will
turn itself off automatically.

• Parental Lock

- Block the viewing of a DVD-video unsuitable for
children.

• Resume Playback

- Lets you resume playback from the point at which
playback was stopped.

• Bit Rate Indication

• DRC (dynamic range control)

- You can control the range of sound volume.

Accessing from [MODE] button

During playback

• Subtitles in a Desired Language

- You can select a desired language for displaying
subtitle, if that language is available on a DVD-video.

• Selecting a Camera Angle

- You can select the desired camera angle, if a DVD
contains sequences recorded from different angles.

• Zoom

- Allows you to enlarge the size of picture image.

• Black Level Adjustment

• Virtual Surround

• Search

- chapter search / title search / track search / time
search

• Marker

- The part on the disc designated by user can be
called back.

• Repeat

- chapter / title / track / all / A-B

Accessing from [MODE] button

In stop mode

• Program Playback for audio CD

- You can program the order of tracks to play them
back in designated order.

• Random Playback for audio CD

- This unit can shuffle the order of tracks to play them
back in randomly.

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

Accessing from [AUDIO] button

During playback

• Choices for Audio Language and Stereo Sound
Function

- Select your desired languages or stereo sound
function when different options are available on
your disc.

5

EN

NTRODUCTION

I

 Contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

INTRODUCTION

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tilt Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

PREPARATION

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connection to Cable Receiver or Satellite Box . . . . . . . . . .10

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Plug In the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

TV Functions

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

WATCHING TV

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TV Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

TV Screen Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

OPTIONAL SETTING

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Autoscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Manual Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Antenna Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

PC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

DVD Functions

OPERATING DVD

Playable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Unplayable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Paused and Step-by-step Playback . . . . . . . . . . . . . . . . . . . . .36

Fast Forward / Fast Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Search Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Repeat Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Repeat A-B Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

On-screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

DVD SETTING

DVD Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

DVD Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Parental Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Reset to the Default Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

TROUBLESHOOTING

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

INFORMATION

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . .53

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in

any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written
consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.
Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.

6

EN

EnglishEspañol Français

HDMI 2

HEAD PHONE

INTRODUCTION PREPARATION

 Control Panel

DVD

75 16 4 3 2

STAND BY

POWER ON

 Ter mi na ls

18

19
20

21

22

23

24

25

Note:

service terminal (service use only)

*

• Use this terminal only when a software update is necessary.

• User should not connect any devices to the service terminal
such as digital camera, keyboard, mouse, etc. (because these
will not work).

• The software update is, in most cases, handled by an
authorized service person or in some circumstances the user
may be asked to do the software upgrade themselves.

HDMI 2

HEAD PHONE

1. y (power) (p. 15)

Press to turn the unit on and off.

2. B (play) (p. 36)

Press to begin the disc playback.

3. C (stop) (p. 36)

Press to stop the disc playback.

A

(eject) (p. 36)

4.

Press to eject the disc.

5. CH K / L (p. 16

Press to select channels or move up (K) / down (L)
through the main menu items.

6. SETUP (p. 15

8

9
10
11

Press to display the main menu.

7. VOL X / Y (p. 16)

Press to adjust the volume or move right (
through the main menu items.

8. DVD indicator

Lights up orange when the disc is inserted.

9. STAND BY indicator

Lights up red when power is off.

10. POWER ON indicator

Lights up green when power is on.

11. Infrared sensor window

Receives infrared rays transmitted from the remote
control.

/ p. 17)

/ p. 44)

[Side Panel]

17

12. HDMI 2 Input jack (p. 10 / p. 11)

HDMI connection from HDMI device.

13. S-Video Input jack (p. 12)

*

S-Video cable connection from an external device.

14. Video Input jack (p. 13)

RCA video cable connection from an external device.

15. Audio Input jack (p. 12 / p. 13)

RCA audio cable connection from an external device.

16. Headphone jack

12

Headphone connection for personal listening.

[Rear Panel]

17. Antenna Input jack (p. 10)

RF

13

14

15

coaxial cable connection for your antenna or cable

TV signal.

18. Disc loading slot (p. 36)

Insert

the disc wit

h the label side facing forward.

19. AC power cord (p. 14)

Connect to a standard AC outlet to supply power to

16

this unit.

20. PC Input jack (p. 14)

VGA cable connection from PC.

21. HDMI 1 Input jack (p. 10 / p. 11)

HDMI connection for HDMI or DVI device.

22.

Component video and Audio Input jack

RCA component video cable and RCA audio cable
connection from an external device.

23. Digital audio Output jack (p. 13)

Coaxial digital cable connection for a decoder or an
audio receiver.

24. Audio Input jack for PC connection (p. 14)

Mini-plug audio cable connection from PC.

25. Audio Input jack for HDMI 1 (p. 11)

RCA audio cable connection from a DVI device.
(For HDMI 1 Input jack only)

X

) / left (Y)

(p. 10 / p. 12)

EN

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

7

NTRODUCTION

I

 Remote Control Function

10

11
12

13
14

1
2

15

3

16

17

4

18
5
6

7

19

8

9

20

21

11

22

23

24

25

1. INPUT SELECT (p. 17)
Press to access connected external devices

like a BD/DVD recorder.

2. POWER (p. 15)
Press to turn the unit on and off.

3. Number buttons (p. 16)

• Press to select channels.

• Press to select chapter, title (DVD), or track (CD)
directly.

-

(hyphen)

• Press to shift the subchannel from the main
channel.

+10 button

• Press to select 10 or higher number of chapters.

4. SETUP (p. 15 / p. 44)

Press to display the main menu.

5. ENTER (p. 15)

Press to decide the command of setting when

the main menu is displayed.

6. s / B / K / L (cursor) (p. 15)

Press to move left / right / up / down through

the items.

7. BACK (p. 18)

Press to return to the previous menu operation.

8. CH RETURN (p. 16)

Press to return to previously viewed channel.

9. VOL. X / Y (p. 16)

Press to adjust the volume.

10. MUTE(p. 16)

Press to turn the sound on and off.

11. SKIP H / G (p. 38)

Press to skip forward or backward chapters, titles

(DVD) or tracks (CD).

12. PAUSE F (p. 17)

TV mode

• Press to pause screen image.

DVD mode

• Press to pause the disc playback.

When using a universal remote control to operate this unit.

• Make sure the component code on your universal remote control is set to our brand.
Refer to the manual accompanying your remote control for more details.

• We do not guarantee 100% interoperability with all universal remote controls.

8

EN

EnglishEspañol Français

INTRODUCTION PREPARATION

13. DISC MENU (p. 36)
Press to display the menu on the disc.

14. TITLE (p. 36)
Press to display the title menu (DVD).

A

EJECT (p. 36)

15.

Press to eject the disc.

16. AUDIO (p. 5 /p. 17 / p. 42)
Digital mode (DTV)

• Press to select the audio language.

Analog mode (TV)

• Press to select the audio mode.

DVD mode

• Press to select the audio language (DVD), or

sound mode (CD).

17. SLEEP (p. 16)
Press to activate the sleep timer.

18. SCREEN MODE (p. 19)
Press to select aspect ratio available for the TV

screen.

19. INFO (p. 18 / p. 41)

• Digital mode (DTV)

Press to display the channel information, signal
type and TV setting.

• Analog mode (TV)

Press to display the channel number, signal
type and TV setting.

• External Input mode

Press to display the external input mode, signal
type and TV setting.

• DVD mode

Press to display the current status.

20. CH K / L (p. 16 / p. 17)

Press to select channels and the external input
mode.

21. REV E / FWD D (p. 37)

Press to begin slow forward or slow reverse
playback during the pause mode (DVD) and
search forward or backward through the disc.

22. STOP C (p. 36)
Press to stop the disc playback.

23. PLAY B (p. 36)
Press to begin the disc playback.

24. MODE (p. 5)

• Press to arrange the playing order or
playback randomly (CD).

• Press to set the black level (DVD) and
the virtual surround on or off.

• Press to change the camera angle to see the
sequence being played back from different
angle (DVD).

• Press to search chapter, title (DVD),
track (CD) or time.

• Press to set the marker.

• Press to repeat playback chapter, title (DVD),
track, disc (CD) repeatedly or between
designated point A and B.

• Press to magnify the part of picture
(2x and 4x : DVD).

• Press to select the subtitles on the disc (DVD).

25. CLEAR (p. 39)

• Press to clear the numbers entered incorrectly.

• Press to cancel the point A for A-B repeat.

• Press to remove the track number in program
input (CD).

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

 Installing the Batteries

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

INFORMATION

9

EN

REPARATION

HDMI 2

(red)

(blue)

(green)

(red)

(blue)

(green)

P

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect...
Be sure your antenna or other device is connected properly before plugging in the AC power cord.

 Antenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF

rear of this unit

antenna

RF coaxial cable

or

cable TV signal

* Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit

to memorize all available channels in your area. Refer to “Initial Setup” on page 15.

Note:

• If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local
electronics store for these items.

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than
settop versions.

• To switch your reception source easily between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CATV installer.

 Connection to Cable Receiver or Satellite Box

Use an HDMI or an RCA component video cable to connect the HDMI or the Component video Input jack of the unit to the
HDMI or the component video output jack of the cable receiver / satellite box.
If you connect to the unit’s Component video Input jack, connect RCA audio cables to the Audio L/R jacks next to the
Component video connector.

e.g.)

HDMI OUT

HDMI cable

cable TV signal

including PPV

10

satellite dish

or

AUDIO OUT

ANT IN

or

RF coaxial
cable

STEREO
PCM

cable receiver / satellite box

RL

(green)

(green)

COMPONENT VIDEO OUT

(blue)

(blue)

Pr/CrPb/CbY

(red)

(red)

(green)

(green)

(blue)(blue)

(red)

(red)

HDMI 2

or

side or
rear of this unit

RCA component video cable
and RCA audio cable

* You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video

output jack because they might have different output jacks.

* Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the

clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable /
satellite provider.

EN

HDMI 2

STEREO
PCM

DVI OUT

AUDIO OUT

RL

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

 External Device Connection

[HDMI Connection]

HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio
through a single cable.

e.g.)

EnglishEspañol Français

INTRODUCTION

PREPARATION

WATCHING TV

side or
rear of this unit

TITLE 5
CHAPTER 15
REPEAT A-B

BD/DVD recorder

HDMI OUT

HDMI cable

HDMI 2

or

with the HDMI output jack

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select “PCM” for the digital audio of the device you connected or check the HDMI audio setting.
There may be no audio output if you select “Bitstream”, etc.

• This unit only accepts signals in compliance with EIA861.

[HDMI-DVI Connection]

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

e.g.)

HDMI-DVI conversion cable

To HDMI1

input jack only

rear of this unit

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

cable receiver or satellite box
with the DVI output jack

INFORMATION

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

• HDMI-DVI connection requires separate RCA audio connections as well.

• Audio signals are converted from digital to analog for this connection.

• DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.

RCA audio cable

11

EN

REPARATION

(green)

(blue)

(red)

P

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Component video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit.
If you connect to the unit’s Component video Input jack, connect RCA audio cables to the Audio L/R jacks next to the
Component video connector.

e.g.)

(green)

(green)

(blue)

(blue)

(red)

(red)

rear of this unit

TITLE 5
CHAPTER 15
REPEAT A-B

BD/DVD recorder with
the component video output jack

COMPONENT VIDEO OUT

AUDIO OUT

RL

(red)(blue)(green)

Pr/CrPb/CbY

RCA component

video cable

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-Video Connection]

S-Video connection offers good picture quality for video devices connected to the unit.
If you connect to the unit’s S-Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video
connector.

e.g.)

TITLE 5
CHAPTER 15
REPEAT A-B

AUDIO OUT

S-VIDEO

OUT

RL

S-Video cable

side of this unit

BD/DVD recorder with
the S-Video output jack

RCA audio cable

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

12

EN

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

EnglishEspañol Français

INTRODUCTION

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.
If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video
connector.
When the audio jack of the video device is monaural, connect an RCA audio cable to the Audio L Input jack.

e.g.)

camcorder video game

STEREO

STAND-BY

VCR

AUDIO OUT

VIDEO

RL

OUT

RCA audio cable

RCA video cable

side of this unit

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

[Audio Output Connection (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound.
Use a digital audio coaxial cable to connect the unit to external digital audio devices.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

e.g.)

Dolby Digital

decoder

DIGITAL AUDIO

COAXIAL IN

digital audio coaxial cable

rear of this unit

INFORMATION

13

EN

REPARATION

P

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.
Use an VGA cable for this connection and it requires stereo mini-plug audio cable as well.

e.g.)

VGA cable should be
with ferrite core.

personal computer

stereo mini-plug audio cable

The following signals can be displayed:

Format Resolution Refresh rate Format Resolution Refresh rate

VGA 640 x 480 60Hz

SVGA 800 x 600 60Hz

XGA 1,024 x 768 60Hz

Other formats or non-standard signals will not be displayed correctly.

VGA cable

1,280 x 768 60Hz

WXGA

1,360 x 768 60Hz

rear of this unit

Note:

• Please purchase the VGA cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your PC.

 Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC power cord

AC outlet

Caution:

• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

14

EN

EnglishEspañol Français

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

TV Functions

INTRODUCTION

 Initial Setup

This section will guide you through the unit’s initial setting which includes
selecting a language for your on-screen menu and autoscan, which
automatically scans and memorizes viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

After making all the necessary connections,

1

press [POWER] to turn on the unit.

• This operation may take a few moments.

Use [Cursor K / L] to select the on-screen language

2

from the choices on the right side of the TV screen.
(English / Español / Français)

Initial Setup

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Select Skip

ENTER

Enter

• “Initial Setup” menu on step 3 will be displayed in the

selected language after you press [ENTER].

Use [Cursor K / L] to select “Antenna” for TV channels

3

or “Cable” for CATV channels, then press [ENTER].

Initial Setup

Initial Setup

Make sure the antenna is connected to“ANT. IN” jack.

Select the destination of “ANT. IN” jack.

Antenna

Or

Cable

ENTER

Select Skip

• “Autoscan” will begin.

Initial Setup

Initial Setup

Now the system is scanning for channels,please wait.
Autoscan will take up to 20 minutes to complete.

0%

Analog channels 0ch

Digital channels 0ch

English

Español

Français

SETUP

Antenna
Cable
Skip

ANT.IN

SETUPBACK

BackEnter

SETUP

Skip

Use [Cursor s / B] to select the desired location setting,

4

then press [ENTER].

Initial Setup

Initial Setup

Select “Retail” or “Home” for your location.

HomeRetail

ENTER

Select Enter

• Select ”Retail”, the unit will be set up with predefined
setting for retail displays. In this setting, the power
consumption may possibly exceed the limited
requirement of the ENERGY STAR® qualification.

• Select ”Home”, the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality
according to your preference.

• When the initial setup is completed, the lowest
memorized channel with the confirmation message
of the location setting will be displayed on the TV
screen.

Note:

• If you connect the cable system directly, contact the CATV
installer.

• If you press [POWER] or [SETUP] during autoscan, this
setting will be canceled.

• The initial autoscan function can be executed for either
“Antenna” or “Cable” only once. When you change the
connection (Antenna / Cable), set autoscan again.
Refer to page 20.

• If there is no signal input from the antenna terminal and
no operation for several seconds after you turn on the unit,
“Helpful Hints” appears. Follow the instructions listed on
the TV screen.

Initial Setup

Initial Setup

No channel is registered.

Try Autoscan again?

Verify that you have a cable connected to the

on the back of the TV, the channel installation process

searches this connection. If you are using a cable or satellite

box, please confirm the input which you have connected the

box and press the “INPUT SELECT” key on the remote control to

select the appropriate source input.

"ANT. IN" jack

ENTER

Select Skip

Enter

Retry
Later

SETUP

• You must set ”Home” in step 4. Otherwise, the settings
of picture and sound quality you adjusted will not be
memorized after you turn off the unit.

After an initial setup is completed...

• If you want to scan the channels automatically again,
refer to “Autoscan” on page 20.

• You can add the desired channels unmemorized by
“Autoscan”. Refer to “Manual Register” on page 21.

• If you want to change to another language, refer to
“Language Selection” on page 22.

• If you want to change the location setting, refer to
“Location” on page 33.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

EN

15

ATCHING TV

W

 Channel Selection

Select channels by using [CH K / L] or [the Number buttons].

• To select the memorized channels, use [CH K / L] or
[the Number buttons].

• To select the non-memorized channels, use

[the Number buttons].

To Use [the Number buttons]

TV

- When selecting analog channel 11

DTV

- When selecting digital channel 11-1

Be sure to press [-] before entering
the subchannel number.

• Press [CH RETURN] to return to the previously
channel.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting
far surpasses analog broadcasting in both its picture
and sound quality. Not all digital TV broadcasts are high
definition (HD). To confirm whether your watching TV
program is in HD, refer to the program guide, contact
your cable / satellite provider or local TV stations.

NTSC

(analog mode)

(Soccer)

CH4

(Soccer)

CH4

Air time

6:00pm

6:30pm

CH4-1

(Soccer)

ATSC

(digital mode)

(Soccer)

CH4-1

main channel

(News)

CH4-2

CH4-3

(Tennis)

 Volume Adjustment

This section describes how to adjust the volume. The mute function, which
turns the sound off and on, is also described.

Use [VOL. X / Y] to adjust the audio volume.

Volume 30

The volume bar will be displayed at the bottom of the
TV screen when adjusting the volume.

• The volume bar will automatically disappear in a few
seconds.

Press [

MUTE] to turn off and on the sound.

Mute

“Mute” is displayed on the TV screen for a few seconds.

Press [

MUTE] again or [VOL. X / Y] to recover the

original volume.

 Sleep Timer

The sleep timer can be set to automatically turn off the unit after an
incremental period of time.

Press [SLEEP] to set the sleep timer.

1

Sleep

Sleep timer display appears on the TV screen.

Off

main channel

CH4-1

main channel

(Soccer)

CH4-1

main channel

can be changed by using

(Soccer)

CH4-2

subchannel

CH4

CH4

(Soccer)

(Soccer)

7:00pm

7:30pm

8:00pm

What is the subchannel?

By using high compression technology, digital
broadcasting offers a service that enables multiple
signals to send simultaneously.
Therefore, you can select more than one program per
main channel since digital broadcasting technology
distinguishes between multiple channels broadcast by
a single network.

Note:

• “No Signal” will appear on the T V screen after the
subchannel broadcast is over.

• “Audio only program“ message will appear on the TV
screen, when you receive only sound signal.

16

EN

subchannelsubchannel

(News)

[CH K / L]

Press [SLEEP] repeatedly to change the amount of time

2

until shut off.

Sleep

120min.

You can set your unit to turn off after a set period of
time (from 30 to 120 minutes).

• Each press of [SLEEP] will increase the time by 30

.

minutes.

• After setup, the sleep timer display can be called up

for checking by pressing [SLEEP].

To cancel the sleep timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed
on the TV screen.

Note:

• The sleep timer display will automatically disappear in a
few seconds.

• When you disconnect the unit from the AC outlet or when
a power failure occurs, the sleep timer setting will be
canceled.

EnglishEspañol Français

INTRODUCTION

 Still Mode

You can pause the image shown on the TV screen.

Press

[PAUSE F] to pause the image shown on the TV

screen.

Still

• The sound output will not be paused.

• If no signal is detected or protected signal is received
during still mode, the image remains paused and the
sound output will be muted.

• The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

 Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle
through the input modes.

Input Select

TV
Video
Component
HDMI1
HDMI2
PC

 Switching Audio Mode

This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.

TV

Press [AUDIO] to display the currently selected
audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.

11

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREO MONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

When only monaural audio is available

(cannot be switched)

STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio

DTV

Press [AUDIO] to display the currently selected

1

language and the number of available languages.

SAP / STEREO

MONO

PREPARATION WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

DTV/TV channel

or

Video

Component

HDMI1

HDMI2

PC

• Pressing [CH L] reverses the direction of the input
modes.

11-1

Press [AUDIO] repeatedly to cycle through the

2

English 1/3

available audio languages.

• Available languages differ depending on the
broadcast. “Other” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.

Note:

• [AUDIO] does not control external audio devices.

• The information display will automatically disappear in a
few seconds.

INFORMATION

17

EN

ATCHING TV

W

 TV Screen Information

You can display the currently selected channel or other information such as
the audio mode on the TV screen.

TV

In the analog mode, the current channel number and the audio mode are
displayed.

DTV

In the digital mode, the detailed broadcasting information for the current
channel such as program title, program guides are displayed.

Press [INFO].

11

SAP / STEREO

480i

480i

• The current channel number, audio mode, type of
resolutions for video signal, TV aspect ratio, CC and
TV program rating are displayed on the top-right
corner of the TV screen.

• To clear the display, press [INFO] again. You can also
press [BACK].

SD

SD

TV-PG DLSV

4:3

4:3

CC

CC

Press [INFO] to display the details of the currently
selected program.

Broadcasting information

The following information is displayed.

1 2

A Day of Memories

A Day of Memories

A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were

TV: TV-14

1 program title
2 program guide

(The program guide added to broadcasting
information is displayed to a maximum of 4 lines.)

3 broadcast station
4 channel number
5 audio language

Refer to “Switching Audio Mode” on page 17.

6 effective scanning lines and scan mode
7 digital TV format
8 program aspect ratio
9 CC (not available if closed caption is set to “Off”)
10 child lock rating

34

KABC

KABC

English 1/2

1080i

1080i

Rating

11-1

16:9HDHD

16:9

CC

CC

5
6, 7, 8

9
10

18

EN

Note:

• When the program guide consists of more than 4 lines, use

[Cursor K/ L] to scroll.

• “No description provided.” is displayed when the program
guide is not provided.

• While the program guide is displayed, the closed caption
function is interrupted.

• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to Video Input

jack.

Video

480iSDSD

480i

TV-PG DLSV

• The information display will automatically disappear in
1 minute.

CC

CC

 TV Screen Display Mode

4 types of display modes can be selected when the broadcasting station
is sending 4:3 or 16:9 video signal. And 3 types of display modes can be
selected for PC input signal.

Press [SCREEN MODE ] repeatedly to switch the TV
aspect ratio.

For 4:3 video signal

EnglishEspañol Français

INTRODUCTION

PREPARATION WATCHING TV

For 16:9 video signal

Sidebar Full

Wide Cinema

Sidebar

Display a 4:3 picture at its original size. Sidebars appear
on both edges of the screen.

Full

Display a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fill the screen.

Cinema

Display a 4:3 picture at a 16:9 size; the picture is
stretched horizontally and vertically to fill the screen.
This crops out the top and bottom of the picture.

Wide

Display the picture with its center at the original size
and the edges stretched horizontally to fill the screen.

Full

Expand

Zoom

Cinema

Full

Display a 16:9 picture at its original size.

Zoom

Display a 16:9 picture at its maximum size without
changing its horizontal and vertical ratio.

Cinema

Display a vertically stretched picture.

Expand

Display a horizontally stretched picture.

For PC input signal

Normal Full

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

Dot By Dot

Normal

Display a proportionately stretched picture. Sidebars
appear on both edges of the screen.

Full

Display a picture that is stretched out of proportion to
fill the screen.

Dot By Dot

Display a picture in its original size.

INFORMATION

19

EN

PTIONAL SETTING

O

 Main Menu

This section describes the overview of the main menu displayed when you
press [SETUP]. For more details, see the reference page for each item.
The main menu consists of the function setting items below.

Press [SETUP].

PICTURE

You can adjust the picture quality.
Refer to “Picture Adjustment” on page 23.

SOUND

You can adjust the sound quality.
Refer to “Sound Adjustment” on page 24.

CHANNEL

• You can automatically scan the viewable channels.
Refer to “Autoscan” on page 20.

• You can skip the undesired channels when selecting
the channels using [CH K / L].
Refer to “Channel List” on page 21.

• You can add the channels that were not scanned by
the autoscan.
Refer to “Manual Register” on page 21.

DETAIL

• You can change the display format for closed
caption, which displays the dialogue of a TV program
or other information across the TV screen.
Refer to “Closed Caption” on page 25.

• You can set the viewing limitations.
Refer to ‘‘Child Lock” on page 28.

• You can adjust the position, stability and clarity of the
PC screen.
Refer to “PC Settings” on page 32.

• You can select the energy saving mode.
Refer to “Energy Saving Mode” on page 33.

• When you adjust the desired “PICTURE” and
“SOUND” mode, you must switch the setting from
“Retail” to “Home”. Refer to “Location” on page 33.

• You can confirm the version of the software currently
used in this unit.
Refer to ”Current Software Info” on page 34.

LANGUAGE

You can change the language (English, Spanish,
French) displayed on the main menu.
Refer to “Language Selection” on page 22.

DVD

You can customize some functions for the disc
playback. Make sure the unit is in stop mode.
Refer to “DVD SETTING“ section on page 44.

20

EN

 Autoscan

If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a different area after the initial setting, or if you restore the DTV
channel you deleted, you will need to perform autoscan.

Before you begin: Make sure the unit is connected to antenna or cable.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Autoscan”, then press

3

[ENTER].

Use [Cursor K / L] to select an appropriate option, then
press [ENTER].

• When aerial antenna is connected, select “Antenna”.

• When connected to CATV, select “Cable”.

• “Autoscan” will begin.

• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.

Note:

• After setting “Autoscan”, using [CH K/ L] on the remote

control skips unavailable programs automatically.

• If you connect the cable system directly, contact the CATV
installer.

• If you press [POWER] or [SETUP] during autoscan, the
setting will be canceled.

• Even if “Autoscan“ is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing [POWER].

• The PIN Code will be required once you set a PIN Code in
the “Child Lock”. Refer to page 28.

• If you want to change your PIN Code, follow the instruction
of “New Password” . Refer to page 31.

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

Autoscan

Autoscan

Autoscan will rescan all channels.
Autoscan will take up to 20 minutes to
complete.

Select the destination of "ANT.IN" jack.

Antenna

Or

Cable

Now the system is scanning for Channels,please wait
Autoscan will take up to 20 minutes to complete.

75%

Analog channels 10ch

Digital channels 6ch

SETUP

Exit

Back
Antenna
Cable

ANT.IN

EnglishEspañol Français

INTRODUCTION

 Channel List

The channels selected here can be skipped when selecting the channels
using [CH K / L].
Those channels can still be selected with [the Number buttons].

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Channel List”, then press

3

[ENTER].

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

 Manual Register

This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Manual Register”, then

3

press [ENTER].

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

Use [Cursor K / L] to select the channel you want to

4

remove, then press [ENTER].

Channel List

Channel List

Highlight channels for Ch
Up/Down key selection.

ENTER

Ch Select Watch/Skip Back

• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH K / L].

• To reactivate a removed channel, use [Cursor K / L] and
press [ENTER]. The registered channels are highlighted.

• When you remove a main channel, its subchannels
are removed as well.

Note:

• The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.

Press [SETUP] to exit.

5

DTV 6

DTV 6

DTV 8

DTV 8

DTV 48

DTV 48

DTV 67

BACK

Use [the Number buttons] to enter the number of the

4

channel you want to add, then press [ENTER].

27

9

9

58

58

Manual Register

Manual Register

For analog channels, select a
channel to register using number
keys.

For digital channels, you must
perform Autoscan function.

Ch Change

DVD SETTING TROUBLESHOOTING

11

Register

BACK

Back

Press [SETUP] to exit.

5

INFORMATION

Note:

• If setup completes successfully,
“Added to the channel list” is displayed.

• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.

• By using [CH K/ L], you can select the memorized
channels only.

EN

21

PTIONAL SETTING

O

 Antenna Confirmation

DTV

This function lets you check the digital signal strength of each channel.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Antenna”, then press

3

[ENTER].

Use [the Number buttons] or [CH

4

channel for which you want to check the digital signal
strength.

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

K / L

] to select the

 Language Selection

You can choose English, Spanish, or French as your on-screen language.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “LANGUAGE”, then press

2

[ENTER].

Use [Cursor K / L] to select “English”, “Español” or

3

“Français”, then press [ENTER].

Press [SETUP] to exit.

4

Language

Language

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

English

Español

Français

Antenna

Antenna

• If the channel is set to analog channel or external
input, you cannot confirm the antenna condition.

Antenna

Antenna

Indicator is available
for digital broadcasting
only.

Press [SETUP] to exit.

5

22

EN

Current50 50 Max

CH

CH

Ch Change

Ch Change

11-1

Back

Video

Back

Note:

• If you need the English menus instead of the Spanish or

French menus, press [SETUP]. Use [Cursor K / L] to select
“IDIOMA” or “LANGUE”, then press [ENTER].
Use [Cursor K / L] to select “English”, then press [ENTER].
Press [SETUP] to exit the main menu.

 Picture Adjustment

You can adjust brightness, contrast, color, tint, sharpness and color
temperature.

EnglishEspañol Français

INTRODUCTION

Before you begin: You must set ”Home” in ”Location”. Refer to page 33.

Otherwise, the settings you adjusted will not be
memorized after you turn off the unit.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “PICTURE”, then press

2

[ENTER].

Use [Cursor K / L] to select the item you want to adjust,

3

then press [ENTER].

Picture

Adjust the picture quality.

4

Picture

Picture Mode

Brightness
Contrast
Color
Tint
Sharpness
Color Temperature

Personal

Normal

Picture Mode

Use [Cursor K / L] to select the desired setting, then
press [ENTER].
(‘‘Personal“, ‘‘Standard“, ‘‘Sports“, ‘‘Movie“ and ‘‘Game“)

Picture

Picture

Picture Mode

Brightness
Contrast
Color
Tint
Sharpness
Color Temperature

Personal

Standard
Sports
Movie
Game

Brightness

Brightness 30

Contrast

Color

30

Tint

60
36

0
0

Sharpness

Color Temperature

Color Temp. Normal

5

Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature

Use [Cursor K / L] to select the desired setting, then
use [Cursor

Adjust

Contrast

Adjust Move

Color

Adjust Move

Tint

Adjust Move

Adjust Move

Adjust Move

Press [SETUP] to exit.

/

s

B

] to adjust.

Cursor

s

to decrease

ENTER

Move

Enter

60

36

0

0Sharpness

ENTER

Enter

ENTER

Enter

ENTER

Enter

ENTER

Enter

ENTER

Enter

brightness

to decrease
contrast

to decrease
color intensity

to add red to add green

to soften to sharpen

to add warm
colors

Cursor

to increase
brightness

to increase
contrast

to increase
color intensity

to add cool
colors

Note:

• To cancel picture adjustment, press [SETUP].

• Only the “Personal” setting can be adjusted.

PREPARATION

WATCHING TV

B

OPTIONAL SETTING

OPERATING DVD

DVD SETTING TROUBLESHOOTING

INFORMATION

EN

23

PTIONAL SETTING

O

 Sound Adjustment

You can adjust the sound mode, equalizer and some other sound functions.

Before you begin: You must set ”Home” in ”Location”. Refer to page 33.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “SOUND”, then press

2

[ENTER].

Use [Cursor K / L] to select the sound type you want to

3

adjust, then press [ENTER].

Otherwise, the settings you adjusted will not be
memorized after you turn off the unit.

Sound

Sound

Sound Mode
Equalizer
TV Speakers

Standard

Ext. Amp

TV Speakers

Select the audio output from the unit’s speakers, or not.
If your amplifier compatible with the CEC function is
connected to this unit using an HDMI cable, some part
of the sound operations such as volume up can access
synchronized by using this unit’s remote control.

Use [Cursor K / L] to select the desired option, then
press [ENTER].

On

Off

Ext. Amp

Press [SETUP] to exit.

5

The sound will be output from the unit’s
speakers.

The sound will not be output from the
unit’s speakers.

This function allows you to control audio
output from CEC-compatible devices
with the unit’s remote control.

TV Speakers

TV Speakers

"On":

Sound will be output from the TV
speakers.

"Off":

Sound will not be output from the
TV speakers.

"Ext. Amp":

Operation is possible by connecting
to the HDMI-CEC compatible amp
with a HDMI cable. For details look
in the user manual.

On

Off

Ext. Amp

Adjust the following items.

4

Sound Mode

Use [Cursor K / L] to select the desired setting, then
press [ENTER].
(“Personal “, “Standard “, “Movie “, “Music“ and “News “)

Sound

Sound

Sound Mode

Equalizer
TV Speakers

Equalizer

Adjust tonal quality for each frequencies.
Use [Cursor
and use [Cursor K / L] to adjust the level, then press
[ENTER].

<>

] to select the specific frequency

s

/

B

Equalizer

Equalizer

120Hz0500Hz01.5kHz05kHz010kHz

0

Personal

Standard

Movie
Music
News

Note:

• To cancel sound adjustment, press [SETUP].

• We do not guarantee 100% interoperability with other
brands of CEC compliant devices.

24

EN

EnglishEspañol Français

A. Caption Service

INTRODUCTION

 Closed Caption

You can view closed captioning (CC) for TV programs, movies and news.
Closed caption refers to text of dialogue or descriptions displayed on­screen.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “DETAIL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Closed Caption”, then

3

press [ENTER].

See the following description for setting each item.

...

A

“A. Caption Service”

...

B

“B. Digital Caption Service”

...

C

“C. Caption Style”.

Closed Caption

Closed Caption

Caption Service
Digital Caption Service
Caption Style

 page 25

 page 26

 page 26

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

Off
Off

On
Home

A
B
C

A. Caption Service

Use [Cursor K / L] to select “Caption Service”, then

4

press [ENTER].

Closed Caption

Closed Caption

Caption Service
Digital Caption Service
Caption Style

Use [Cursor K / L] to select the desired closed caption,

5

then press [ENTER].

Closed Caption

Closed Caption

Caption Service Off

Digital Caption Service
Caption Style

Caption mode

CC1 and Text1;

are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it
does not obstruct relevant parts of the picture).

CC3 and Text3;

serve as the preferred data channels.
The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only
in special conditions, such as when “CC1” and “CC3”
or “Text1” and “Text3” are not available.

• There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen
immediately.

Pop-on mode:

Once characters are stored in memory, they are
displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling
(max. 4 lines).

PREPARATION

Off
Off

WATCHING TV

OPTIONAL SETTING

CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4

OPERATING DVD

DVD SETTING TROUBLESHOOTING

INFORMATION

Press [SETUP] to exit.

6

25

EN

PTIONAL SETTING

B. Digital Caption Service

C. Caption Style

O

B. Digital Caption Service

DTV

In addition to the basic closed caption described on page 25, DTV has its
own closed caption called digital caption service. Use this menu to change
the settings for digital caption service.

/

Use [Cursor

4

K

L] to select “Digital Caption Service”,

then press [ENTER].

Closed Caption

Closed Caption

Use [Cursor

5

Caption Service
Digital Caption Service
Caption Style

/

K

L] to select the desired digital caption

Off
Off

service, then press [ENTER].

Closed Caption

Closed Caption

Caption Service

Digital Caption Service

Caption Style

Off

Select if you do not want digital caption
service. This is the default.

Off

Service1
Service2
Service3
Service4
Service5
Service6

Select one of these before changing

Service 1~6

any other item in “Closed Caption”
menu. Choose “Service1” under normal
circumstances.

Press [SETUP] to exit.

6

Note:

• “Digital Caption Service” that you can switch differs
depending on the broadcast description.

C. Caption Style

DTV

You can change the caption style such as font, color or size, etc.

/

Use [Cursor

4

K

L] to select “Caption Style”, then press

[ENTER].

Closed Caption

Closed Caption

Caption Service
Digital Caption Service
Caption Style

Use [Cursor

5

/

K

L] to select “User Setting”, then press

[ENTER].

Caption Style

Caption Style

Use [Cursor

6

Use [Cursor

7

[ENTER]. Then use [Cursor

/

K

L] to select “On”, then press [ENTER].

Caption Style

Caption Style

/

K

L] to select an item, then press

/

K

L] to select the desired

setting and press [ENTER].

Picture display

User Setting
Font Style
Font Size
Font Color
Font Opacity
Background Color
Background Opacity
Edge Color
Edge Type

User Setting

Font Style
Font Size
Font Color
Font Opacity
Background Color
Background Opacity
Edge Color
Edge Type

Off
Off

Off

Font0

Middle
White

Solid
Black
Solid
Black
None

On

Off

26

EN

ABCDEFGHIJKL

ABCDEFGHIJKL

Edge

(Edge Color and Edge Type)

Font

( Font Style, Font Size, Font Color and Font Opacity

or Transparency)

Background

( Background Color and Background Opacity

or Transparency)

• The setting description for each item is shown on the
next page.

• Review your setting choice made on the next page
by looking in the upper right corner of the displayed
setting box (not all selections show the differences
selected).

EnglishEspañol Français

FONT7

INTRODUCTION

Font Style

Closed Captioning font style can be changed as below.

Caption Style

Caption Style

User Setting

Font Style

Font Size
Font Color
Font Opacity
Background Color
Background Opacity
Edge Color
Edge Type

Closed Caption

Font0

Font6

FONT7

Font Size

Font size of the displayed caption can be switched as
below.

Caption Style

Caption Style

User Setting
Font Style

Font Size

Font Color
Font Opacity
Background Color
Background Opacity
Edge Color
Edge Type

Closed Caption

Large

Middle

Small

Font Color

Font color of the displayed caption can be switched as
below.

Caption Style

Caption Style

User Setting
Font Style
Font Size

Font Color

Font Opacity
Background Color
Background Opacity
Edge Color
Edge Type

Closed Caption

White

Black
Red
Green
Blue
Yellow
Magenta
Cyan

Edge Color

Edge color of the displayed caption can be switched as
below.

Caption Style

Caption Style

User Setting
Font Style
Font Size
Font Color
Font Opacity
Background Color
Background Opacity

Edge Color

Edge Type

Edge Type

Edge type of the displayed caption can be switched as
below.

Caption Style

Caption Style

User Setting
Font Style
Font Size
Font Color
Font Opacity
Background Color

Background Opacity

Edge Color

Press [SETUP] to exit.

8

Edge Type

Closed Caption

White

Black

Red
Green
Blue
Yellow
Magenta
Cyan

Closed Caption

None

Raised
Depressed
Uniform
L.Shadow
R.Shadow

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

Font Opacity

Font opacity of the displayed caption can be switched
as below.

Caption Style

Caption Style

User Setting
Font Style
Font Size
Font Color

Font Opacity

Background Color
Background Opacity
Edge Color
Edge Type

Closed Caption

Solid

Flash
Translucent
Transparent

Background Color

Background color of the displayed caption can be
switched as below.

Caption Style

Caption Style

User Setting
Font Style
Font Size
Font Color
Font Opacity

Background Color

Background Opacity
Edge Color
Edge Type

Closed Caption

White

Black

Red
Green
Blue
Yellow
Magenta
Cyan

Background Opacity

Background opacity of the displayed caption can be
switched as below.

Caption Style

Caption Style

User Setting
Font Style
Font Size
Font Color
Font Opacity
Background Color

Background Opacity

Edge Color
Edge Type

Closed Caption

Solid

Flash
Translucent
Transparent

Note:

• To show the closed caption on your TV screen, broadcast
signal must contain the closed caption data.

• Not all TV programs and commercials have the closed
caption or all types of the closed caption.

• Captions and texts may not match the TV voice exactly.

• Changing channels may delay the closed caption for a few
seconds.

• Adjusting or muting the volume may delay the closed
caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
action. This is not a malfunction.

• The caption or text characters will not be displayed while
the main menu or functions display is shown.

• If a black box appears on the TV screen, this means that
the closed caption is set to the text mode. To clear the box,
select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

• If the unit receives poor quality television signals, the
captions may contain errors, or there might be no captions
at all. Some possible causes of poor quality signals are:

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

• The unit retains the closed caption setting if the power
fails.

• Closed caption will not be displayed when you are using
an HDMI connection.

• When the unit receives special effects playback signal (i.e.,
Search, Slow and Still) from a VCR’s video output channel
(CH3 or CH4), the unit may not display the correct caption
or text.

DVD SETTING TROUBLESHOOTING

INFORMATION

27

EN

PTIONAL SETTING

O

 Child Lock

Child lock reads the ratings for programs, then denies access to the
programs which exceed the rating level you set. With this function, you
can block certain programs inappropriate for children and any channels or
external input modes can be invisible.

Press [SETUP] to display the main menu.

1

/

K

Use [Cursor

2

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor K / L] to select “Child Lock”, then press

3

[ENTER].

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

Use [the Number buttons] to enter the 4-digit

4

numbers for your PIN Code.

Child Lock

Child Lock

On
Home

See the following description for setting each item.

Child Lock

Child Lock

Channel Lock
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password

A
B
C

D

...

A

“A. Channel Lock”

...

B

“B. MPAA Rating”

...

C

“C. TV Rating”.

...

D

“D. New Password”

 page 29

 page 29

 page 30

 page 31

Note:

• When you select a rating and set it to “Block”, the higher
ratings will be blocked automatically. The lower ratings
will be available for viewing.

• When you set the highest rating to “View”, all ratings turn
to “View” automatically.

• To block any inappropriate programs, set your limits in
“MPAA Rating”, “TV Rating” and “Downloadable Rating”.

• The child lock setting will be retained after a power failure
(except the access code reverts to 0000).

• If the rating is blocked, will appear.

• “Downloadable Rating” will be available when the unit
receives a digital broadcast using the new rating system.

• If the broadcasting signal does not have the
Downloadable Rating information, “Downloadable
Rating is currently not available.” will appear.
This message will also appear when you try to access
“Downloadable Rating” after you have cleared the
Downloadable Rating information, and the new
information has not been downloaded since.

• The Canadian rating systems on this unit is based on
CEA-766-A and the Canadian Radio-Television and
Telecommunications Commission (CRTC) policy.

Enter password.

PIN Code

• When you have not set up your PIN Code,

enter [0], [0], [0], [0].

• When the PIN Code is correct, “Child Lock” menu is
displayed.

28

EN

----

BACK

Back

EnglishEspañol Français

A. Channel Lock

B. MPAA Rating

INTRODUCTION

A. Channel Lock

Particular channels or external input modes can be invisible in this
function.

Use [Cursor K / L] to select “Channel Lock”, then press

5

[ENTER].

Child Lock

Child Lock

Cannel Lock
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password

Use [Cursor K / L] to select the desired rating, then

6

press [ENTER] repeatedly to switch between “View”
and “Block”.

Channel Lock

Channel Lock

Video
Component
HDMI 1
HDMI 2
PC
DVD

ENTER

Select View/Block Back

B. MPAA Rating

MPAA Rating is the rating system created by MPAA (Motion Picture
Association of America).

PREPARATION

Use [Cursor K / L] to select “MPAA Rating”, then press

5

[ENTER].

Child Lock

Child Lock

Cannel Lock
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password

Use [Cursor K / L] to select the desired rating, then

6

press [ENTER] repeatedly to switch between “View”
and “Block”.

MPAA Rating

MPAA Rating

X
NC-17
R
PG-13
PG
G

BACK

NR

ENTER

Select View/Block Back

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

BACK

Press [SETUP] to exit.

7

Rating Category
X Mature audience only
NC-17 No one under 17 admitted

R

Restricted; under 17 requires accompanying
parent or adult guardian

PG-13 Unsuitable for children under 13
PG Parental guidance suggested
G General audience
NR No rating

Press [SETUP] to exit.

7

DVD SETTING TROUBLESHOOTING

INFORMATION

EN

29

PTIONAL SETTING

C. TV Rating

O

C. TV Rating

Use [Cursor K / L] to select “TV Rating”, then press

5

[ENTER].

Child Lock

Child Lock

Cannel Lock
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password

Use [Cursor K / L / s

6

/

B

] to select the desired rating,

then press [ENTER] repeatedly to switch between
“View” and “Block”.

TV Rating

TV Rating

TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y

Select View/Block Back

Press [SETUP] to exit.

7

To set the sub ratings

As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further
set the sub ratings to block specific elements of
programming. To set the sub ratings, follow the step
below.

ENTER

V S L D

FV

Rating Category
TV-MA Mature audience only higher
TV-14 Unsuitable for children under 14
TV-PG Parental guidance suggested
TV-G General audience

TV-Y7

Appropriate for all children 7 and
older

TV-Y Appropriate for all children lower

Sub Rating Category Rating

FV Fantasy Violence TV-Y7
V Violence
S Sexual Situation
L Coarse Language

TV-PG
TV-14
TV-MA

D Suggestive Dialogue TV-PG, TV-14

Note:

BACK

• Blocked sub rating will appear beside the main rating
category in “TV Rating” menu.

• You cannot block a sub rating (D, L, S or V) if the main
rating is set to “View”.

• Changing the category to “Block” or “View” automatically
changes all its sub ratings to the same (“Block” or “View”).

/

s

B

Use [Cursor K / L /

] to select the desired rating,

then press [ENTER] repeatedly to switch between
“View” and “Block”.

TV Rating

TV Rating

30

EN

V S L D

FV
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y

BACK

ENTER

Select View/Block Back

D. New Password

D. New Password

Although the default code (0000) is supplied with the unit, you can set your
own PIN Code.

EnglishEspañol Français

INTRODUCTION

Use [Cursor K / L] to select “New Password”, then press

5

[ENTER].

Child Lock

Child Lock

Channel Lock
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Clear Downloadable Rating
New Password

Press [the Number buttons] to enter the new 4-digit

6

PIN Code.

• Enter PIN Code again in “Confirm password.” entry
field.

New Password

New Password

Press [SETUP] to exit.

7

Enter password.

Confirm password.

----

----

PIN Code

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

BACK

Back

Note:

• Make sure new PIN Code and confirm PIN Code must be
exactly the same. If they are different, the space is cleared
for reentering.

• Your PIN Code will be erased and return to the default
(0000) when a power failure occurs.
If you forget the PIN Code, unplug the AC power cord for 10
seconds to restore the PIN Code to 0000.

DVD SETTING TROUBLESHOOTING

INFORMATION

31

EN

PTIONAL SETTING

O

 PC Settings

This function lets you adjust the PC screen position, clock and phase during
PC Input.

Press [SETUP] to display the main menu.

1

/

K

Use [Cursor

2

L] to select “DETAIL”, then press

[ENTER].

Use [Cursor

3

/

K

L] to select “PC Settings”, then press

[ENTER].

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

Use [Cursor K / L] to select the setting you want to

4

adjust, then press [ENTER].

On
Home

Adjust the setting.

5

Auto Adjustment

Use [Cursor K / L] to select “Adjust”, then press
[ENTER].

Auto Adjustment

Auto Adjustment

To automatically synchronize the
phase and clock on the TV and PC.

• The horizontal/vertical position, clock and phase of
the PC screen are automatically adjusted.

Horizontal Position, Vertical Position

Use [Cursor

Horizontal Position

H. Position

Adjust Move

Vertical Position

V. Position

Adjust Move

/

s

B

] to adjust.

Cursor

s

to move PC

-

0

-

0

+

ENTER

Enter

ENTER

Enter

screen left

to move PC

+

screen up

Cursor

to move PC
screen right

to move PC
screen down

Clock, Phase

/

Use [Cursor
the PC screen and “Phase” setting to improve the clarity
of the PC screen.

B

{

] to adjust “Clock” setting to stabilize

Cancel
Adjust

B

32

EN

PC Settings

PC Settings

Auto Adjustment

Horizontal Position
Vertical Position
Clock
Phase

Cursor

s

Cursor

B

Clock

0

0
0
0
0

Clock

Adjust Move

Phase

0

Phase

Adjust

Press [SETUP] to exit.

6

Move

ENTER

Enter

ENTER

Enter

to decrease
setting value

to increase
setting value

Note:

• You may not obtain an appropriate screen with
“Auto Adjustment” for some signals. In this case, adjust the
settings manually.

• Adjust “Phase” setting after “Clock” setting has been
properly adjusted.

EnglishEspañol Français

INTRODUCTION

 Energy Saving Mode

You can set whether the power consumption is saved or not.

Press [SETUP] to display the main menu.

1

/

K

Use [Cursor

2

[ENTER].

Use [Cursor

3

press [ENTER].

L] to select “DETAIL”, then press

/

K

L] to select “Energy Saving Mode”, then

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

On
Home

 Location

When you select ”Retail”, the power consumption may possibly exceed the
limited requirement of the ENERGY STAR® qualification.

Press [SETUP] to display the main menu.

1

/

K

Use [Cursor

2

[ENTER].

Use [Cursor

3

[ENTER].

L] to select “DETAIL”, then press

/

K

L] to select “Location”, then press

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

On
Home

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

Use [Cursor

4

press [ENTER].

On

Off

Press [SETUP] to exit.

5

/

K

L] to select the desired mode, then

Energy Saving Mode

Energy Saving Mode

When set to “On”, power
consumption is reduced by
decreasing backlight
brightness.

Select if you want to reduce the power
consumption.

The power consumption may possibly
exceed the limited requirement of the
ENERGY STAR® qualification.

DVD SETTING TROUBLESHOOTING

/

K

Use [Cursor

4

L] to select the desired location, then

press [ENTER].

Location

On

Off

Press [SETUP] to exit.

5

Location

Location Home is
recommended for normal
home use.
In the Retail S tore mode, all
settings are fixed.

Retail

Home

INFORMATION

EN

33

PTIONAL SETTING

O

 Current Software Info

This function shows what version of the software currently used.

Press [SETUP] to display the main menu.

1

/

K

Use [Cursor

2

[ENTER].

L] to select “DETAIL”, then press

Use [Cursor

3

/

K

L] to select “Current Software Info”,

then press [ENTER].

Detail

Detail

Closed Caption
Child Lock
PC Settings
Energy Saving Mode
Location
Current Software Info

Confirm the version of the software currently used.

4

Current Software Info

Current Software Info

Release Version:

CL19OD_1.0

Press [SETUP] to exit.

5

On
Home

Back

34

EN

PERATING DVD

O

 Playable Media

EnglishEspañol Français

INTRODUCTION

DVD Functions

Media Type

Logo

Recorded

Signal

Media Size 5 inches (12 cm)

DVD-VIDEO

DVD-RW DVD-R CD-DA CD-RW CD-R

digital video (MPEG2) digital audio

 Unplayable Media

NEVER play back the following discs. Otherwise, malfunction may result!

3 inches (8 cm) disc, DVD-RAM, DVD-audio, CD-i, photo CD, Video CD, DVD with region codes other than 1 or ALL, DTS-CD,
DVD-ROM for personal computers, CD-ROM for personal computers, the discs with labels, scratches, stains, blemishes, etc.,
HD DVD, Blu-ray Disc, CD-RW/-R with MP3 files and CD-RW/-R with JPEG files including Kodak Picture CD.

On the following disc, the sound MAY NOT be heard.

super audio CD

Any other discs without compatibility indications

Note:

• Unfinalized discs cannot be played back.

• For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video format discs can be
played back.

• Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of
discs.

• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be
delivered.

• Do not use a single CD adaptor which makes 3 inches (8 cm) to 5 inches (12 cm) disc.

• You can play back discs with the marks listed in “Playable Media”. If you use non-standardized discs, this unit may not play them back or
the sound and video quality will be compromised.

• If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD

DVD SETTING

Region Codes

This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols on
your DVD. If these region symbols are not on your
DVD, you cannot play back the DVD in this unit.

The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only be played

back on the unit with the same region code.

Color Systems

DVD is recorded in different color systems throughout the
world. The most common color system is NTSC (which is
used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in PAL color systems.

EN

TROUBLESHOOTING INFORMATION

35

PERATING DVD

O

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

 Playback

Before you begin:

Turn on the amplifier and any other equipment which is connected to this unit.
Make sure the external audio receiver (not included) are set to the correct channel.

Press [POWER] to turn on the unit.

1

Insert a disc with label facing forward.

2

label

• In case the DVD was recorded on both sides, make
sure the label of the side you want to play back is
facing forward.

The unit switches to the DVD mode when the unit was

3

in TV mode and detects the type of disc.

e.g.) DVD

DVD

• Press [PLAY B] if the unit does not go to the DVD mode.

The unit starts playback.

4

• If playback does not start automatically, press [PLAY B]
again.

Press [STOP C] to stop playback temporarily.

5

 Disc Menu

DVD

Some discs contain disc menus which describe the contents of the disc or
allow you to customize disc playback, or title menu which lists the titles
available on the DVD.

To display the DVD menu, press [DISC MENU] and use
[Cursor K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
To display the top menu, press [TITLE] and use
[Cursor K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).

Note:

• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.

 Resume Playback

Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B]. Playback will
resume from the point at which
playback was stopped.

Note:

• To cancel resume, press [STOP C] one more time in the
stop mode. On some discs, [STOP C] will not work while
the resume message appears. Please wait until the message
disappears.

• The resume information will be kept even when the unit is
turned off. However, ejecting the disc will cancel the resume
feature. Playback will start at the beginning the next time
you insert the disc.

Resume ON

Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.

• If playback remains stopped for 20 minutes, the unit will
turn itself off automatically when “AUTO POWER OFF“ is
set to “ON“.

Press [A EJECT] to eject the disc.

6

Note:

• “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the
disc or this unit.

• Some DVD may start playback from title 2 or 3 due to
specific programs.

• During the playback of a 2-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.

• When you cannot remove the disc, you may try either
following operations.

- Press and hold [A EJECT] on the unit for more than 5
seconds.

- Unplug the AC power cord and plug it in again, then press

[A EJECT].

It will take about 10 seconds to eject the disc, while that the
unit will not respond to any key commands.

36

EN

 Paused and Step-by-step Playback

Press [PAUSE F] during playback.

• Playback will be paused and sound will be
muted.

To continue playback, press [PLAY B].

DVD

Each time you press [PAUSE F] in the pause mode, the
disc goes forward one frame at a time.
To continue playback, press [PLAY B].

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if
pictures in the pause mode are blurred. Refer to page 47.

 Fast Forward / Fast Reverse

Press [FWD D] or [REV E] repeatedly
during playback to select the desired
forward or reverse speed.
To continue playback, press [PLAY B].

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if
pictures in the fast playback mode are blurred. Refer to page

47.

• Fast forward / fast reverse speed varies with disc.
Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x)
on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.

• For DVD, sound will be muted during this function.

• For audio CD, sound will be intermittent during the search.

 Slow Forward / Slow Reverse

DVD

Press [FWD D] or [REV E] repeatedly
during the paused mode to select the
desired forward or reverse speed.
To continue playback, press [PLAY B].

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if
pictures in the slow playback mode are blurred. Refer to
page 47.

• Slow forward / slow reverse speed varies with disc.
Approximate speed is 1(1/16x), 2(1/8x) and 3(1/2x).

• The sound will be muted during this function.

E

EnglishEspañol Français

INTRODUCTION

Once a desired zoom factor is set,

3

1

1

use [Cursor K / L / s / B] to slide the zoomed picture
across the TV screen.

To exit zoom, repeat steps 1 to 2 above and press

4

[ENTER] repeatedly until “OFF“ appears.

Note:

• The gray box with an inner blue box that shows during
zoomed playback is the position guide indicates the position
of the zoomed image within the overall image.
Position guide stays on the TV screen until you press
[ENTER].
Press [ENTER] one more time to recall the position guide
when disappears.

• Zoom function does not work while the disc menu is
displayed.

• 4x zoom is not available on some discs.

• Zoom function is also available during pause mode.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD

 Zoom

DVD

The zoom function allows you to enlarge the video image and to pan
through the enlarged image.

During playback, press [MODE] repeatedly until

1

“ ” appears.

(

)

OFF

ZOOM

• The picture becomes twice as large.

Press [ENTER] repeatedly to change the zoom factor,

2

“2x” or “4x”.

(

)

4x

ZOOM

DVD SETTING

TROUBLESHOOTING INFORMATION

EN

37

PERATING DVD

Chapter / Title / Track Search

O

 Search Functions

Chapter / Title / Track Search

You can select chapters, titles or tracks on the disc.

During playback, press [MODE] repeatedly until

1

“ “ / “ “ appears.

• If you want to perform the title search, use

[Cursor K / L] repeatedly until “ “ appears.

e.g.) DVD

)

/12

(SEARCH

Press [the Number buttons] to select your desired

2

chapter, title or track within 60 seconds.

To play back a single-digit chapter, title or track when
there are more than 10 chapters, titles or tracks, press
[ENTER] after entering the chapter, title or track
number.

)

/12

(SEARCH

Using [SKIP H / G]

During playback, press [SKIP H / G] repeatedly

1

until a desired chapter, title or track will be selected.

or

Playback will start automatically from the chapter, title

2

or track you selected.

Note:

• [SKIP H / G] are not available when playback is stopped.

current chapter/track

(CH)

(TR)

CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4

[SKIP H] [SKIP G]

[SKIP H] [SKIP G]

(If the disc has no chapter.)

or

current title

(TT)

TT 1 TT 2 TT 3 TT 4

Playback will start automatically from the chapter, title

3

or track you selected.

Note:

• Chapter, title or track search can only be performed during
playback or when the unit has kept the resume information.
It cannot be performed in the stop mode.

• The total number of chapters / titles / tracks in your disc;
with less than 10 chapters / titles / tracks, press the chapter /
title / track number directly. To play a double-digit chapter /
title / track, press the chapter / title / track number.

• Track search is not available for programmed or random
playback.

38

EN

EnglishEspañol Français

Time Search

Direct Search

DVD

CD

INTRODUCTION

Time Search

You can select the desired time which the disc is played back from.

During playback, press [MODE] repeatedly until

1

“ “

“ “ appears.

/

e.g.) DVD

)

/12

(SEARCH

Use [Cursor K / L] repeatedly until “ “ appears.

2

TOTAL

TOTAL

1:29:00

1:29:00

or

Press [the Number buttons] to select your desired

3

time lapse within 60 seconds.

Playback will start automatically from the time you

4

selected.

Note:

• When there is no need to enter a number, “0” appears
automatically. For example, “0: 0_: _ _” appears in the time
search menu if the total time of the title or track is less than
10 minutes.

• Press [CLEAR] to erase the incorrect input at step 3.

• Time search can only be performed during playback or
when the unit has kept the resume information.
It cannot be performed in the stop mode.

Direct Search

Press [the Number buttons] to select your desired
chapter, title or track.

Note:

• To select a single-digit chapter, title or track number, press
the number directly.

• To select double digit chapter, title or track number:

- If the disc contains more than 9 and less than 100 chapter,

title or track, press [+10] first, then enter the double digit
chapter, title or track number.
(e.g., for track 26, press [+10], [2] and [6].)

 Repeat Playback

Repeat function is available only during playback.

During playback, press

1

appears.

Press [Cursor K / L] to change the repeat mode.

2

[MODE]

repeatedly until “ ”

(

)

OFF

REPEAT

OFF (repeat off)

CHAPTER (current chapter repeat)

TITLE (current title repeat)

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD

DVD SETTING

Press [BACK] to exit.

3

OFF (repeat off)

TRACK (current track repeat)

ALL (entire disc repeat)

TROUBLESHOOTING INFORMATION

39

EN

PERATING DVD

O

 Repeat A-B Playback

You can repeat playback between A and B on a disc.

During playback, press [MODE] repeatedly until

1

AB

AB

“

” appears.

(

A-B REPEAT

(

A-B REPEAT

(

A-B REPEAT

)

)

)

AB

AB

OFF

Press [ENTER] at your desired starting point (A).

2

Press [ENTER] at your desired ending point (B).

3

AB

AB

A-

AB

AB

A-B

• Point B should be in the same title or track as point A.

• Within a few seconds, the section A-B will begin to
play back repeatedly.

To cancel repeat A-B playback, press [MODE]

4

repeatedly until “

AB

AB

“ appears.

Press [ENTER] so “OFF” appears.

Note:

• Repeat setting (except “ALL”) will be cleared when moving to
another title or chapter, track.

• During programmed playback, repeat setting will be
effective for the tracks in the program.

• Repeat playback or repeat A-B playback may not available
with some discs.

• Repeat A-B playback does not function during other repeat mode.

• To cancel point A, press [CLEAR] at step 2 in
“Repeat A-B Playback”.

• Stopping playback will cancel repeat A-B playback.

 Random Playback

CD

This function shuffles the playing order of tracks instead of playback in the sequence.

In stop mode, press [MODE] repeatedly until “RANDOM”

1

menu appears.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

Press [PLAY B] to start random playback.

2

Note:

• To repeat the current track in the random mode, follow the
steps 1 and 2 in “Repeat Playback” on page 39 and select
“ TRACK”.

• To repeat the entire random selections, follow the steps 1
and 2 in “Repeat Playback” on page 39 and select “ ALL”.

40

40

EN

EN

PLAY

 Programmed Playback

CD

You may determine the order in which tracks will play back.

In stop mode, press [MODE] repeatedly until

1

“PROGRAM” menu appears.

PROGRAM

CD-DA TOTAL 0:00:00

T 1 3:31

Use [Cursor K / L] to select a desired track, then press

2

[ENTER] to store.

• Additional tracks may be on other screens. Use

[Cursor

K / L

]

to go on to the next / previous pages.

• Repeat this step until you have selected all the tracks
you wish to play back in the program.

or

• Up to 99 tracks can be ordered.

• If 8 or more tracks were in a program, use
[SKIP H / G] to see all the tracks.

Press [PLAY B] to start programmed playback.

3

Note:

• Press [CLEAR] to erase the last track in the program if you

make an error.

• To erase all programmed tracks at once, select “ALL CLEAR”

and press [ENTER] at step 2.

• While a program is being played back, [STOP C] works as

follows:

- Pressing [STOP C] once: The track will be in the resume
standby mode. Next time you press [PLAY B], the playback
will resume from the point where it is stopped in the
programmed playback.

- Pressing [STOP C] twice: Resume mode will be canceled.
Next time you press [PLAY B], playback will restart
from the first track in the original order. However, your
programmed playback can be restarted when you follow
the above steps. (Your programs are still stored until either
the disc is ejected or the unit is turned off.)

- On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.

• To repeat the current track in the program, follow the steps 1
and 2 in “Repeat Playback” on page 39 and select “TRACK”.

• To repeat the entire program, follow the steps 1 and 2 in
“Repeat Playback” on page 39 and select “ALL”.

• Turning off the unit or ejecting the disc will erase the
program.

• You cannot use [the Number buttons] to select another
track during programmed playback. Use [SKIP H / G] to
select other tracks in the program.

• You cannot combine random playback with programmed
playback.

• You cannot alter a programmed order during playback.

• You can start programmed playback only while in
“PROGRAM” menu.

T 2 4:28
T 3 4:19
T 4 3:58
T 5 4:12
T 6 4:02
T 7 3:55

ENTER/OK

PLAY

T 1 3:31

CLEAR

PROGRAM

CD-DA TOTAL 0:08:22

T 15 3:18
T 16 4:24

ALL CLEAR

ENTER/OK

PLAY

T 16 4:24

CLEAR

1/ 1

1/ 3

T 4 3:58
T 16 4:24

1/ 1

3/ 3

 On-screen Display

DVD

Subtitle Language

CD

You can check the information about the current disc by pressing [INFO]
on the remote control.

appears only when multi-

angle is available on the DVD
current playback status

11/16 0:00:00 - 0:03:30

1

2

1/3 0:00:00 - 1:23:45

remaining time of the current
chapter
elapsed time of the current
chapter

CH (Chapter):
current chapter number /
total chapters

remaining time of the current title

elapsed time of the current title

TT (Title):
current title number / total titles

1

2

4/12 0:03:21 - 0:02:15

4/12 0:13:45 - 0:45:40

current playback status

T

remaining time of the current
track

elapsed time of the current track

TR (Track):
current track number /
total tracks

ALL:
current track number /
total tracks

T

current repeat setting appears only
when the repeat setting is active

T : Track repeat
A : All tracks repeat

A B : A-B repeat

remaining time of the entire disc

elapsed time of the entire disc

EnglishEspañol Français

INTRODUCTION

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD

3

TL1

layer number, appears only when
playing a 2-layered disc
L0 : Layer 0 is playing
L1 : Layer 1 is playing

current repeat setting appears
only when the repeat setting is
active

C : Chapter repeat

T : Title repeat
A B : A-B repeat
bit rate indication for the amount
of audio and video data currently
being read

4

3

Note:

• When you are playing back an audio CD in program or
random mode, “ PROGRAM” (or “ RANDOM”) will be
displayed instead of 2.

 Special Settings

Subtitle Language

DVD

This unit allows you to select a subtitle language (if available) during DVD
playback.

During playback, press [MODE] repeatedly until

1

DVD SETTING

TROUBLESHOOTING INFORMATION

“ “ appears.

2

Use [Cursor K / L] repeatedly until your desired
language appears.

(

)

SUBTITLE

1.ENG / 6

or

subtitles can be varied on the
displayed number.

current subtitles language.

• Each time you press [Cursor K / L], the subtitle

language changes as shown on the next page.

41

EN

PERATING DVD

Audio Language

Camera Angles

Black Level Setting

O

OFF (no subtitles)

ENG (English subtitles)

FRE (French subtitles)

...

Press [BACK] to exit.

3

Note:

• To cancel the subtitle, select “OFF” at step 2.

• If your language is not shown after pressing

[Cursor K / L] several times, the disc may not have that
language. However, some discs allow you to change subtitle
languages setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual along with
the disc.)

• When “NOT AVAILABLE” appears on the TV screen, it means
no subtitle is recorded on the scene.

• If you choose a language that has 3-letter-language code,
the code will be displayed every time you change the subtitle
language setting. If you choose any other languages, “---”
will be displayed instead. Refer to page 48.

• Ejecting the disc will cancel your subtitle setting.

Audio Language

DVD

This unit allows you to select an audio language (if multiple languages are
available) during DVD playback.

During playback, press [AUDIO] repeatedly until the
desired language appears.

3/2.1ch 48k/3

1.ENG

Dolby D

audio can be varied on the displayed

• Each time you p

changes as example below.

ENG (English audio)

number.
current audio language.

ress [AUDIO], the audio language

Camera Angles

DVD

Some DVD may contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle if “
is set to “OFF” in “OTHERS” menu, “ ” will not appear. Refer
to page 47.

During playback, press [MODE] repeatedly until

1

“ “ appears.

Use [Cursor K / L] repeatedly until your desired

2

camera angle appears.

Press [BACK] to exit.

3

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

During playback, press [MODE] repeatedly until “ ”

1

appears.

Press [Cursor K / L] to adjust the black level.

2

” appears on the screen. If “ANGLE ICON”

)

1 / 8

(ANGLE

or

Black Level Setting

or

angles can be varied on the
displayed number.

(BLACK LEVEL

(

BLACK LEVEL

)

)

OFF

ON

SPA (Spanish audio)

FRE (French audio)

...

Note:

• Some discs will only allow you to change the audio setting
from the disc menu. Refer to the manual accompanying the
discs for details.

• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language.
However, some discs allow you to change multiple audio
languages setting in the disc menu. (Operation varies
depending on the disc, so refer to the manual along with
the disc.)

• When “NOT AVAILABLE” appears on the TV screen, it means
audio language is not available.

42

EN

ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.

Press [BACK] to exit.

3

Note:

• The setting will be kept even if the unit is turned off.

EnglishEspañol Français

Stereo Sound Mode

Virtual Surround

Marker Setup

INTRODUCTION

Stereo Sound Mode

CD

This unit allows you to select a sound mode during CD playback.

During playback, press [AUDIO] repeatedly until the
desired sound mode appears.

STEREO

• Each time you press [AUDIO], the sound mode

changes as example below.

STEREO (stereo sound with left and

right channels)

L-ch (left channel sound only)

R-ch (right channel sound only)

Note:

• Virtual surround cannot be changed when the sound mode
is set to either “L-ch” or “R-ch”.

Virtual Surround

You can enjoy virtual surround on your 2 channel stereo system.

During playback, press [MODE] repeatedly until “ ”

1

appears.

OFF (SURROUND

)

Marker Setup

This feature allows you to assign a specific point on a disc to be called back later.

To set a marker

During playback, press [MODE] repeatedly until

1

“ ” / “ ” appears.
e.g.) DVD

_ _ /12 (SEARCH)

Use [Cursor K / L] repeatedly until marker search

2

menu appears.

or

Use [Cursor s / B] to select an available marker within

3

60 seconds.

When the playback reaches the point at which you

4

want to set a marker, press [ENTER].

• Marker is now set.

Press [BACK] to exit.

5

12345678910AC

12345678910AC

2345678910AC

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD

Press [Cursor K / L] to select the sound level.

2

or

1 : Natural effect.
2 : Emphasized effect.
OFF : No effects (original sound).

Press [BACK] to exit.

3

(

SURROUND

1

)

Note:

• The setting will be kept even if the unit is turned off.

• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”.
Refer to “Stereo Sound Mode” on page 43.

• Turn down the level or select “OFF” if the sound is distorted.

To return to the marker later

Repeat steps 1-2 in “To set a marker”.

1

to select the desired marker.

e.g.) DVD

Press [ENTER] at the desired marker to restart playback

2

from the specific point which you set.

Note:

• Marker search menu will disappear in about 60 seconds
when there is no input.

• You can mark up to 10 points.

• To clear a marker, select the marker to be cleared, and then
press [CLEAR].

• Ejecting the disc or turning off the power will erase all
markers.

• Selecting “ ” at step 3 in the section “To set a marker” will
also erase all markers.

Use [Cursor s / B]

2345678910AC

2345678910AC

DVD SETTING

TROUBLESHOOTING INFORMATION

EN

43

VD SETTING

D

Settings are only effective when the unit is in DVD mode and any discs should not be played back.

 DVD Language Setting

You can change the desired language when playing back the disc.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “DVD”, then press [ENTER].

2

Setup

Setup

Press “ENTER” key to move to DVD Setup.

SUBTITLE *1, *2 (Default: OFF)
Select the desired subtitle language.

LANGUAGE

SUBTITLE

OFF

ENGLISH
FRENCH
SPANISH

ENTER/OK

GERMAN
ITALIAN
SWEDISH

DISC MENU *1 (Default: ENGLISH)
Select the desired language in DVD menu.

Use [Cursor s / B] to select “ ”, then press [ENTER].

3

LANGUAGE

AUDIO ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH

ENTER/OK

Use [Cursor K / L] to select the desired item, then press

4

[ENTER].

LANGUAGE

AUDIO ORIGINAL

SUBTITLE OFF
DISC MENU ENGLISH

ENTER/OK

Use [Cursor K / L] to select the desired item, then press

5

[ENTER].

AUDIO *1, *2 (Default: ORIGINAL)

Select the desired audio language.

LANGUAGE

DISC MENU

ENGLISH

FRENCH
SPANISH
GERMAN

ENTER/OK

ITALIAN
SWEDISH
DUTCH

Note:

• To change the on-screen language, call up “LANGUAGE”
from the main menu and set the desired language.
Refer to “Language Selection” on page 22.

*1

• Language options are not available with some discs.

• If “OTHER” is selected in “AUDIO”, “SUBTITLE” or
“DISC MENU” menu, press 4-digit number to enter the code
for the desired language. Refer to “Language Code List” on
page 48.

• Only the languages supported by the disc can be selected.

*2

• Language setting for Audio and Subtitle are not available
with some discs.

-

Use [MODE] to select subtitles available on the DVD.

-

Use [AUDIO] to select audio available on the DVD.

• If the DVD’s default settings for audio and subtitle are the
same language, the subtitles may not show unless you
turn them on.

Press [SETUP] to exit.

6

44

EN

LANGUAGE

AUDIO

ORIGINAL

ENGLISH
FRENCH
SPANISH

ENTER/OK

GERMAN
ITALIAN
SWEDISH

 DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only affects
during the playback of DVD.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “DVD”, then press [ENTER].

2

Use [Cursor s / B] to select “ ”, then press [ENTER].

3

Use [Cursor K / L] to select the desired item, then press

4

[ENTER].

DRC (dynamic range control) (Default: ON)

This function is available only on the discs which are
recorded in the Dolby Digital format.

ON : Compress the range between soft and loud

sounds.

OFF : No effects (original sound).

Setup

Setup

Press “ENTER” key to move to DVD Setup.

AUDIO

DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM

ENTER/OK

AUDIO

DRC ON

DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM

ENTER/OK

DOWN SAMPLING (Default: ON)
This function is available only on digital outputting of a

disc recorded in 96kHz.

AUDIO

DRC ON

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ENTER/OK

ON : When outputting in 48kHz.
OFF : When outputting the original sound.

Note:

• When playing back a 96 kHz disc with the copyright
protection or when ‘‘Virtual Surround” is set to “1” or “2”,
the sound will be down sampled at 48 kHz even if the
“DOWN SAMPLING” is set to “OFF”.
Refer to “Virtual Surround” on page 43.

DOLBY DIGITAL (Default: BITSTREAM)
Set to “BITSTREAM“ when this unit is connected to a

Dolby Digital decoder.

AUDIO

DRC ON
DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ENTER/OK

BITSTREAM : Outputs Dolby Digital signals.
PCM : Converts the Dolby Digital into PCM.

(2 channel)

Press [SETUP] to exit.

5

EnglishEspañol Français

INTRODUCTION

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

DVD SETTING

TROUBLESHOOTING

INFORMATION

45

EN

VD SETTING

D

 Parental Setting

Parental setting prevents your children from viewing inappropriate
materials. (password protected.) Playback will stop if the ratings exceed
the levels you set.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “DVD”, then press [ENTER].

2

Use [Cursor s / B] to select “ ”, then press [ENTER].

3

Setup

Setup

Press “ENTER” key to move to DVD Setup.

Use [Cursor K / L] to select the desired item, then press

6

[ENTER].

PARENTAL

PARENTAL LEVEL

ALL

8 [ ADULT ]
7 [ NC-17 ]
6 [ R ]

ENTER/OK

5 [ PGR ]
4 [ PG13 ]
3 [ PG ]

PARENTAL LEVEL

ALL : All parental locks are cancelled.
8 [ADULT] : All ratings (adult / general / children)

can be played back.

7 [NC-17]-2 [G] : Only DVD intended for general use

and children can be played back.

1 [KID SAFE] : Only DVD intended for children can

be played back.

Press [SETUP] to exit.

7

PARENTAL

PARENTAL LEVEL ALL

ENTER/OK

Use [the Number buttons] to enter the 4-digit

4

numbers for your password, then press [ENTER].

PARENTAL

Enter current password.

ENTER/OK

• If you have set password already, use

[the Number buttons] to enter the current 4-digit
password.

• You cannot use the default password (4737) to play back
a DVD.

Use [Cursor K / L] to select the “PARENTAL LEVEL”, then

5

press [ENTER].

PARENTAL

PARENTAL LEVEL ALL

PASSWORD CHANGE

ENTER/OK

To change the password

Follow steps 1 to 4. Use [Cursor K / L] to select

5

“PASSWORD CHANGE”, then press [ENTER].

PARENTAL

PARENTAL LEVEL ALL

PASSWORD CHANGE

ENTER/OK

Use [the Number buttons] to enter the new 4-digit

6

password.

PARENTA L

PASSWORD

Please enter a 4-digit password.
0 0 0 0

ENTER/OK

Don’t forget the password.
Press ‘ENTER/OK’ to activate

Note:

• DVD-video may not respond to parental lock settings. Make
sure this function works with your DVD-video.

• Record the password in case you forget it.

• If you forget the password, press [4], [7], [3], [7], then enter
your new password. Password will be cleared and parental
levels will be set to “ALL”.

• A power failure will not erase your password.

Press [SETUP] to exit.

7

password.

46

EN

 Others

Setup

Setup

Press “ENTER” key to move to DVD Setup.

You can change the other functions.

Press [SETUP] to display the main menu.

1

EnglishEspañol Français

STILL MODE (Default: AUTO)
Set the picture quality in the still mode.
If you select “AUTO”, it automatically selects the best
resolution setting (“FRAME” or “FIELD”) based on the
date characteristics of the pictures.

INTRODUCTION

PREPARATION

Use [Cursor K / L] to select “DVD”, then press [ENTER].

2

Use [Cursor s / B] to select “ ”, then press [ENTER].

3

OTHERS

ANGLE ICON ON
STILL MODE AUTO
AUTO POWER OFF ON

ENTER/OK

Use [Cursor K / L] to select the desired item, then press

4

[ENTER].
ANGLE ICON (Default: ON)

Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.

FIELD : The picture in the still mode will be

stabilized.

FRAME : The picture in the still mode will be highly

defined.

OTHERS

ANGLE ICON ON

STILL MODE AUTO

AUTO POWER OFF ON

ENTER/OK

AUTO POWER OFF (Default: ON)
Set to “ON” to turn this unit off automatically after 20

minutes of no use.

OTHERS

ANGLE ICON ON
STILL MODE AUTO

AUTO POWER OFF ON

ENTER/OK

Press [SETUP] to exit.

5

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

DVD SETTING

OTHERS

ANGLE ICON ON

STILL MODE AUTO
AUTO POWER OFF ON

ENTER/OK

TROUBLESHOOTING

INFORMATION

47

EN

VD SETTING

Setup

Setup

Press “ENTER” key to move to DVD Setup.

D

 Reset to the Default Setting

You can reset all the settings except for the parental setting and on-screen
menu language.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “DVD”, then press [ENTER].

2

Use [Cursor s / B] to select “ ”, then press [ENTER].

3

Use [Cursor K / L] to select “YES”, then press [ENTER].

4

Note:

• When you want to cancel the initialization, select “NO” at

step 4, then press [ENTER].

Press [SETUP] to exit.

5

48

EN

INITIALIZE

Initialize?
NO
YES

ENTER/OK

INITIALIZE

Initialize?
NO

YES

ENTER/OK

 Language Code List

Language Code

Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851

Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech [CZE] 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166

Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467

Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767

Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955

A-B

C-E

F-H

I-K

L-N

Note:

• If you choose a language that has a 3-letter abbreviation,
the code will be displayed every time you change the audio
or subtitle language setting above. If you choose any other
language, ‘---’ will be displayed instead. (3-letter abbreviation is
written in bracket.)

Language Code

Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061

O-R

Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish [POL] 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467

S

Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568

T

Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669

U-Z

Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267

ROUBLESHOOTING

T

 FAQ

EnglishEspañol Français

INTRODUCTION

Question Answer

• Check the antenna or cable connection to the main unit.

• Check the batteries of the remote control.

• Check if there is an obstacle between the infrared sensor window and the
remote control.

• Test the signal output. If OK, then possible infrared sensor trouble.

My remote control does not work.
What should I do?

How come the Initial setup appears every
time I turn on this unit?

Why I cannot watch some TV programs.

How come there is no image from the
connected external devices?

Whenever I entered channel number,
it changes automatically.

My disc cannot be played back.
Is there any way I can play my disc?

Why are captions not displayed entirely?
Or, captions are delayed behind the
dialogue.

How can I set the clock ? • There is no clock function on this unit.

Refer to “IR Signal Check” on page 52.

• Aim the remote control directly at the infrared sensor window on the
front of the unit.

• Reduce the distance to the unit.

• Re-insert the batteries with their polarities (+/– signs) as indicated.

• When there is an infrared-equipped device such as PC near this unit, it
may interrupt the remote control signal of this unit.

• Move the infrared-equipped device away from this unit, change the angle
of the infrared sensor or turn off the infrared communication function.

• Connect the RF coaxial cable to the unit directly and run the initial setup.

• Make sure to complete the channel scan before turning off the unit.

• Make sure autoscan has been completed.
Refer to “Autoscan” on page 20.

• Autoscan must be completed when you set up the unit for the first
time or move it to a location where previously unavailable channels are
broadcast.

• The selected channel may not be broadcasting.

• When autoscan is interrupted and not completed,
some channels will not be received. Make sure to complete.
Refer to “Autoscan” on page 20.

• The selected channel cannot be viewed by the “Child Lock” setting.
Refer to ‘‘Child Lock” on page 28.

• The unit requires some kind of antenna input. An indoor antenna
(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from
your wall cable/satellite box needs to be plugged into the unit.

• Check if the right input mode is selected by pressing [INPUT SELECT] or

[CH K / L]. Refer to “Switching Each Input Mode” on page 17.

using

• Check the antenna or cable connection to the unit.

• When using the Component Video Connection check that the Green
(Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their
corresponding colored jacks on the unit.

• Many digital channels have alternate channel numbers. The unit changes
the numbers automatically to the ones signifying the broadcasting
stations. These are the numbers used for analog broadcasts.

• Clean the disc.

• Ensure the disc is correctly inserted.

• Check if the disc is defective by trying another disc.

• Cancel the parental lock or change the control level.

• Insert a correct disc that plays back on this unit.

• Handle a disc with special care so that it does not have fingerprints,
scratches or dusts on its surface.

• Captions that are delayed a few seconds behind the actual dialogue are
common for live broadcasts. Most captioning production companies can
display a dialogue to maximum of 220 words per minute. If a dialogue
exceeds that rate, selective editing is used to insure that the captions
remain up-to date with the current TV screen dialogue.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING

TROUBLESHOOTING

INFORMATION

EN

49

ROUBLESHOOTING

T

 Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this manual,

check the following chart and all connections once before calling for service.

Symptom Remedy

• Make sure the AC power cord is plugged in.

No power

Control button does not work.

Power is ON but no screen
image.

No picture or sound

T

V

No color

Adjusted ‘‘PIC TURE” or ‘‘SOUND”
is not effective every time turn
on the unit.

Sound OK, picture poor

Picture OK, sound poor

You see a distorted picture or
hear an unusual sound.

• Make sure that the AC outlet supplies the proper voltage, plug another electrical
appliance into the AC outlet.

• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit
to reset itself.

• Press only one button at a time. Do NOT press more than one buttons at the same
time.

• Check whether the connection of the antenna, cable receiver or satellite box is
connected correctly.

• Check whether all the cables to the unit are connected to the correct output jack
of your device like BD/DVD recorder.

• Make sure that the selected input mode is connected to the working input jack.

• Check if your computer is NOT in sleep mode when the input mode of this unit is
in PC mode. Tap any key on the keyboard to wake up your computer.

• Check if the power is on.

• Check if the right input mode is selected.

• Check whether all the cables to the unit are connected to the correct output jack
of your device like BD/DVD recorder.

• View other TV channels. The problem might be limited to the broadcasting station.

• Turn off the unit and wait for about 1 minute, then turn on the unit again.

• Check whether the connection of the antenna, cable receiver or satellite box is
connected correctly.

• Make sure that the selected input mode is connected to the working input jack.

• Check if your computer is NOT in sleep mode when the input mode of this unit is
in PC mode. Tap any key on the keyboard to wake up your computer.

• Make sure that the sound is not muted. Press [
and current volume level will appear on the TV screen.

• Make sure that the volume is NOT set to “0” or “Mute”. If so, use [VOL. X / Y] to
adjust the desired volume.

• View other TV channels. The problem might be limited to the broadcasting station.

• Adjust “Color” in the main menu.

• You must set ”Home” in ”Location”. Refer to page 33.
Otherwise, the settings you adjusted will not be memorized after you turn off the
unit.

• Electrical interference from nearby appliances may affect picture quality.

• Adjust “Contrast” and “Brightness” in the main menu.

• View other TV channels. The problem might be limited to the broadcasting station.

• For the best picture quality, watch “high definition” wide screen programs.
If the HD content is not available, watch “standard definition” programs instead.

• View other TV channels. The problem might be limited to the broadcasting station.

• Check if the audio cable is connected in correctly.

• You may be getting interference from electrical appliances, automobiles,
motorcycles or  uorescent lights.

• Try moving the unit to another location to see if this is the cause of the problem.

MUTE] so that the volume bar

Ghosts, lines or streaks in
picture

You see “noise” or “trash” on the
screen.

Different color marks on the TV
screen

50

EN

• Electrical interference from nearby appliances may affect picture quality.

• View other TV channels. The problem might be limited to the broadcasting station.

• When the capabilities of the unit exceed the capabilities of the digital
broadcasting, the signal will be increased to match the capabilities of the display
of the unit. This may cause noise or trash.

• View other TV channels. The problem might be limited to the broadcasting station.

Symptom Remedy

You switch to a different input
and the volume.

You switch to a different input
and the screen size changes.

The display image does not
cover the entire screen.

T

Captions are displayed as a
white box.

V

No caption is displayed in the
Closed Caption-supported
program.

No caption is displayed when
playing back a disc or a cassette
tape containing captions.

Black box is displayed on the TV
screen.

EnglishEspañol Français

• This unit will memorize the volume level from the last time you adjusted it.

• If the volume of the sound from another device is higher or lower, then the
loudness will change.

• This unit will memorize the viewing mode from the last time you used the
particular input modes.

• If you are using the unit as a PC monitor, make sure that “Horizontal Position” and
“Vertical Position” in “PC Settings” are set correctly.

• If you are watching TV or using the Video, S-Video, Component video or HDMI with
480i Input, press [SCREEN MODE

• Interference from buildings or weather conditions may cause captioning to be
incomplete.

• Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened
program.

• The disc or cassette tape may be illegally copied, or the caption signal might not
have been read during copying.

• The text mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

] repeatedly to switch various screen modes.

INTRODUCTION

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING

Completely distorted picture or
black/white picture with DVD.

Picture freezes momentarily
during playback.

Disc cannot be played.

D

Buttons do not work or the unit

V

stops responding.

D

The unit does not respond to
some operating commands
during playback.

Angle does not switch.

Playback does not start when
the title is selected.

The password for rating level

has been forgotten.

• Make sure the disc is compatible with the unit.

• Check the disc for finger prints/scratches and clean with a soft cloth wiping from
center to edge.

• Clean the disc.

• Ensure the disc is correctly inserted.

• Check if the disc is defective by trying another disc.

• Cancel the parental lock or change the control level.

• Insert a correct disc that plays on this unit.

• Handle a disc with special care so that it does not have fingerprints, scratches, or
dusts on its surface.

• To completely reset the unit, unplug the AC power cord from the power outlet for
5-10 seconds.

• Operations may not be permitted by the disc. Refer to the instructions of the disc.

• The angle cannot be switched for DVD which do not contain multiple angles. In
some cases multiple angles are only recorded for specific scenes.

• Check the “PARENTAL” setting.

• Enter the default password (4737), then your forgotten password will be cleared.

Note:

• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCD screen.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on
correct operations.

• Some functions are prohibited on some discs.

TROUBLESHOOTING

INFORMATION

EN

51

NFORMATION

I

 Glossary

ATS C

Acronym that stands for Advanced
Television Systems Committee and the
name of the digital broadcasting standards.

Aspect Ratio

The width of a TV screen relative to its
height. Conventional TVs are 4:3 (in other
words, the TV screen is almost square);
widescreen models are 16:9 (the TV screen
is almost twice as wide as its height).

CEC (Consumer Electronics Control)

This allows you to operate the linked
functions between our brand devices
with CEC feature and this unit. We do not
guarantee 100% interoperability with other
brands of CEC compliant devices.

Component video

This is a video signal format that conveys
each of 3 principal colors of light (red,
blue and green) through different signal
lines. This allows the viewers to experience
picture colors as original as it is. There are
several signal formats, including Y / Pb / Pr
and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby
Laboratories to compress digital sound. It
offers stereo sound (2ch) or multi-channel
audio.

HDMI

(High-Definition Multimedia Interface)

Interface that supports all uncompressed,
digital audio/video formats including
set-top box, BD/DVD recorder or digital
television, over a single cable.

HDTV (High Definition TV)

Ultimate digital format that produces high
resolution and high picture quality.

NTSC

Acronym that stands for National Television
Systems Committee and the name of the
current analog broadcasting standards.
Off the air NTSC signals will no longer be
sent by broadcasting stations during 2009.

Password / PIN Code

A stored 4-digit number that allows access
to parental control features.

Region Code

Regions associate discs and players with
particular areas of the world.
This unit will only play back discs that have
compatible region codes.
You can find the region code of your unit
by looking on the rear panel.
Some discs are compatible with more than
one region (or all regions).

SAP (Secondary Audio Program)

Second-audio channel delivered separately
from main-audio channel. This audio
channel is used as an alternate in bilingual
broadcasting.

SDTV (Standard Definition TV)

Standard digital format that is similar to the
NTSC picture quality.

S-Video

Offers higher quality images by delivering
each signal, color (c) and luminance (y)
independently of each other through a
separate cable.

 Maintenance

Cabinet Cleaning

• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth immersed in lukewarm water and
wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage
and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before
cleaning the panel, disconnect the AC power cord.

Disc Handling

Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not
used.

• To clean-off, use a soft cloth.

• Do not use a hard cloth since this will mar the disc.

• Wipe the disc in a straight line form center to edge.

• Never wipe with a circular motion.

Servicing

Should your unit become inoperative, do not try to correct
the problem yourself. There are no user serviceable parts
inside. Turn off the unit, unplug the AC power cord and call
our toll free customer support line found on the cover of
this manual to locate an authorized service center.

If the Laser Optical Pickup Unit is Dirty

If the unit still does not perform properly when it is
operated, while referring to the relevant sections and to
"Troubleshooting Guide" in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer or an
Authorized Service Center for inspection and cleaning of
the laser optical pickup unit.

IR Signal Check

If the remote control is not working properly, you can use
a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.

• With a digital camera
(including built-in cell phone cameras):
Point the Digital Camera towards the
remote control infrared diode at the front
of the remote control. Press any button on
the remote control and look through the
camera display. If the infrared pulsating
light appears through the camera, the
remote control is sending out an IR signal.

• Do not use detergent or abrasive cleaning agents.

52

EN

EnglishEspañol Français

 Cable Channel Designations

If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations.
Please check with your local cable company. The following is a chart of common cable channel designations.

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

5A122334455667788991010111112121313A14B15C16D17E18F19G20H

I22J23K24L25M26N27O28P29Q30R31S32T33U34V35W36W+1

W+743W+844W+945W+1046W+1147W+1248W+1349W+1450W+1551W+16

W+2864W+2965W+3066W+3167W+3268W+3369W+3470W+3571W+3672W+3773W+3874W+3975W+4076W+4177W+4278W+4379W+4480W+4581W+4682W+4783W+48

W+4985W+5086W+5187W+5288W+5389W+5490W+5591W+5692W+5793W+5894A-595A-496A-397A-298A-199W+59

W+65

W+66

W+67

W+68

W+69

W+70

W+71

W+72

106

W+86

127

107

W+87

128

108

W+88

129

109

W+89

130

110

W+90

131

111

W+91

132

112

W+92

133

113

W+93

134

W+73

114

W+94

135

W+1753W+1854W+1955W+2056W+2157W+2258W+2359W+2460W+2561W+2662W+27

52

W+74

W+75

W+76

W+77

W+78

115

116

117

118

119

W+79

120

W+2 W+339W+440W+541W+6

37 38

W+60

W+61

100

W+80

121

101

W+81

122

102

W+82

123

W+62

103

W+83

124

W+63

104

W+84

125

W+64

W+85

INTRODUCTION

21

PREPARATION

42

63

84

105

WATCHING TV

126

 General Specifications

TV

TV format: ATSC / NTSC-M TV standard
Closed caption system:

§15.122 / FCC (digital CC)

§15.119 / FCC (analog CC)

Channel coverage (ATSC / NTSC):

Terrestrial VHF: 2~13 UHF: 14~69
CATV 2~13, A~W,

W+1~W+94 (analog W+1~W+84),

A-5~A-1, 5A

Tuning system: Channel frequency synthesized tuning system
Channel access: Direct access keyboard,

Programmable scan, and up / down

DVD

Discs (playback compatibility):

DVD-video, DVD-RW/-R,
audio CD, CD-RW/-R

Frequency response:
DVD (linear sound): 20 Hz to 20 kHz (sample rate: 48 kHz)

20 Hz to 44 kHz (sample rate: 96 kHz)
CD: 20 Hz to 20 kHz

Signal-to-noise ratio (S/N ratio):

CD: 90 dB (JEITA)

Total distortion factor:

DVD: 1 KHz 0.007% (JEITA)
CD: 1 KHz 0.007% (JEITA)

 Electrical Specification

Audio Output: 1W, 16Ω x 2

 Other Specifications

Terminals:

Antenna Input: VHF / UHF / CATV 75Ω unbalanced (F-type)
Audio Input: RCA jack (L/R) x 6 500mV rms
Video Input: RCA jack x 1 1V p-p (75Ω)
S-Video Input: Mini DIN 4-pin jack x 1 Y: 1V p-p (75Ω)

C: 286mV p-p (75Ω)
Component video Input:

RCA jack x 3 Y: 1V p-p (75Ω)

Pb/Cb: 700mV p-p (75Ω)
Pr/Cr: 700mV p-p (75Ω)

HDMI Input: HDMI 19pin x 2
PC Input: D-Sub 15pin x 1 (RGB)

Mini jack ø3.5mm x 1 (audio)

Coaxial Digital audio Output:

RCA jack x 1 500mV p-p (75Ω)
Headphone:

Remote control:
Operating temperature:

41°F (5°C) to 104°F (40°C)

Power requirements:
120V~ AC +/- 10%, 60Hz +/- 0.5%

Power consumption (maximum):
65W
LCD: 19 inches class (18.5 inches measured diagonally)
Dimensions: <Without stand> <With stand>

W: 18.8 inches (477.5mm) 18.8 inches (477.5mm)
H: 13.1 inches (330.4mm) 14.5 inches (365.8mm)
D: 5.4 inches (134.7mm) 8.3 inches (210.0mm)

Weight: 9.1 lbs. (4.1kg) 10.0 lbs. (4.5kg)

1

/8 inches (3.5mm) x 1

Digital encoded infrared light system

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

• Designs and speci cations are subject to change without notice and without
our legal obligation.

• If there is a discrepancy between languages, the default language will be
English.

53

EN

LIMITED WARRANTY

NINETY (90) DAY LABOR / ONE(1)YEAR PARTS

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth
below.

WHO IS COVERED:

This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser­viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.

Note: Any product sold and identified as refurbished or
renewed

Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI­TATIONS:

This Limited Warranty applies only to new company manufac-

to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products pack­aged with the bundled product.

carries a ninety (90) day limited warranty.

mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product.

• Labor charges for installation or setup of the product, adjust­ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or

tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.

• Damage or claims for products not being available for use, or
for lost data or lost software.

• Damage from mishandled shipments or transit accidents when
returning product.

it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or

• A product used for commercial or institutional purposes
(including but not limited to rental purposes).

can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE…

Contact the Customer Care Center at:

1-866-321-3927

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON­SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER­CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.

The company is not liable for any damage to or loss of any pro­grams, data, or other information stored on any media contained
within the product, or other additional product or part not cov­ered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.

This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product

FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501

54

EN

Some states do not allow the exclusions or limitation of inciden­tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.

Printed in China

EnglishEspañol Français