APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the apparatus’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of impor tant
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dr y cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifi ers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fi t into your outlet, consult an electrician for
replacement of the obsolete outlet.
Wall Mount Bracket Kit
Recommended Wall Mount Bracket Kit:
Brand: SANUSModel #: San10B
Recommended Screw dimension: M4 x 0.472” (12 mm)
• The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to
the Wall Mount Instruction Book.
• Funai is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV Wall Mount
Bracket or mount the TV onto the Bracket on your own.
• Wall Mount Bracket Kit is sold separately and is not supplied.
• The Wall Mount Bracket must be installed by experts.
Funai not liable for these types of accidents or
injury noted below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments / accessories specifi ed by
the manufacturer.
12. Use only with the car t, stand,
tripod, bracket, or table specifi ed
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart / apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all ser vicing to qualifi ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
• Do not use screws that are longer or shorter than their
specifi ed length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force; this may damage
the product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or turned on. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:11.8 inches (30cm)
Left and right side:5.9 inches (15cm)
Bottom: 3.9 inches (10cm)
English
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Trade Name: SYLVANIAResponsible Party: FUNAI CORPORATION, Inc.
Model: LD19 0SS2Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION :
WARNING :
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Telephone Number:
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING:
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due
to possible eye injury.
CAUTION:
To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.
Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION:
LOCATION:
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy
protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
Inside, near the deck mechanism.
LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.
1-866-321-3927
3
4
NOTE ABOUT RECYCLING
• This unit’s packaging materials are recyclable and
can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with
your local regulations concerning chemical wastes.
TO AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
• Do not put your fi ngers or objects into the unit.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight or in a place subject
to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place
anything directly on top or bottom of the unit. Depending
on your external devices, noise or disturbance of the picture
and / or sound may be generated if the unit is placed too close
to them. In this case, please ensure enough space between the
external devices and the unit.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Be sure to unplug the AC power cord from the AC outlet
before moving or carrying the unit.
DEW CONDENSATION WARNING
• Dew condensation may form inside the unit in the following
conditions. If so, do not use this unit at least for a few hours
until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Trademark Information
• HDMI, the HDMI Logo, and High-Defi nition Multimedia
Interface are trademarks or registered trademar ks of HDMI
Licensing LLC in the United States and other countries.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• ENERGY STAR® is a joint program of the U.S. Environmental
Protection Agency and the U.S. Depar tment of Energy helping
us all save money and protect the environment through
energy effi cient products and practices.
Consumer Notice:
This TV has been set to maximize energy effi ciency while
delivering the best possible picture using the factory installed
home mode settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption
beyond the original ENERGY STAR
is a trademark of DVD Format/Logo Licensing
•
Corporation.
• The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
®
qualifi ed limits.
Child Safety
English
5
6
INTRODUCTION
Contents
Important Safety Instructions 2
Trademark Information 4
Child Safety 5
INTRODUCTION
Features 7
Symbols Used in this Manual 7
Supplied Accessories 8
Mounting the Unit on Your Furniture 8
Tilt Stand 8
Attaching the Base 8
Installing the Batteries 8
Remote Control Function 9
Control Panel 10
Terminals 11
PREPARATION
Antenna Connection 12
Connection to Cable Receiver or Satellite Box 12
Plug In the AC Power Cord 12
Initial Setup 13
WATCHING TV
Sleep Timer 14
Switching Each Input Mode 14
Channel Selection 14
Still Mode 14
TV Screen Display Mode 15
Sound Functions 15
TV Screen Information 16
USING FUNCTIONS
Picture 18
Sound 18
Channel 19
Features 20
Language 25
DVD 25
Language Code List 27
OPERATING DVD
Playable Media 28
Unplayable Media 28
Playback 29
Disc Menu 29
Resume Playback 29
Paused and Step-by-step Playback 29
Fast Forward / Fast Reverse 29
Slow Forward / Slow Reverse 30
Zoom 30
Search Functions 30
Repeat Playback 31
Repeat A-B Playback 31
Random Playback 31
Programmed Playback 31
On-screen Display 32
Special Settings 32
CONNECTING DEVICES
External Device Connection 34
USEFUL TIPS
Troubleshooting Guide 36
FAQ 38
INFORMATION
Glossary 39
Maintenance 39
General Specifi cations 40
Electrical Specifi cation 40
Other Specifi cations 40
Limited Warranty 41
with the design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written
consent of Funai. All other trademarks used herein remain the exclusive proper ty of their respective owners. Nothing contained in this
manual should be constr ued as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse
of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to
the fullest extent of the law.
SYLVANIA is a registered tr ademark of OSRAM SYLVANIA Inc., used under license.
Features
TV
• DTV / TV / CATV
You can use your remote control to select channels which are
broadcast in digital format and conventional analog format. Also,
cable subscribers can access their cable TV channels.
• Information Display (ATSC only)
You can display the title, contents and other information of the
current DTV program on the TV screen.
• Autoprogram
This unit automatically scans and memorizes channels available in
your area, eliminating diffi cult setup procedures.
• Child Lock
This feature allows you to block children’s access to inappropriate
programs.
• Closed Caption Decoder
Built-in closed caption decoder displays text for closed caption
supported programs.
• MTS / SAP Tuner
Audio can be selected from the remote control.
• Auto Standby
If there is no input signal and no operation for 15 minutes, the
unit will go into standby mode automatically.
• Sleep Timer
You can set the unit to go into standby mode after a specifi c
amount of time.
• Choices for On-screen Language
Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune
directly to any channel using the number and decimal point “•”
buttons on the remote control.
• Various Adjustment for Picture and Sound
Customizes image quality suitable for your room and sets your
sound preference.
• fun-Link via HDMI Link (HDMI Cable not Included)
fun-Link allows your other HDMI link devices to be controlled by
the HDMI cable connected to your TV.
• HDMI Input
• Component Video Input
• PC Input
• S-Video Input
• AV Input
• Digital Audio Output
• Headphone Audio Output
DVD
• Dolby Digital Sound
Enjoy Dolby Digital multi-channel surround sound when you
connect the unit to your Dolby Digital decoder.
• Still / Fast / Slow / Step Playback
Various playback modes are available including still pictures, fast
forward/reverse, slow motion and step frames.
• DVD Menus in a Desired Language
You can display DVD menus in a desired language, if available on
a DVD-video.
• Auto standby
If there is no operation for 20 minutes, the unit will go into
standby mode automatically.
• Parental Lock
Block the viewing of a DVD-video unsuitable for children.
English
• Resume Playback
Lets you resume playback from the point at which playback was
stopped.
• Bit Rate Indication
• DRC (dynamic range control)
You can control the range of sound volume.
Accessing from MODE button
During playback
• Subtitles in a Desired Language
You can select a desired language for displaying subtitle, if that
language is available on a DVD-video.
• Selecting a Camera Angle
You can select the desired camera angle , if a DVD contains
sequences recorded from different angles.
• Zoom
Allows you to enlarge the size of picture image.
• Black Level Adjustment
• Virtual Surround
• Search
chapter search / title search / track search / time search
• Marker
The part on the disc designated by user can be called back.
• Repeat
chapter / title / track / all / A-B
Accessing from MODE button
In stop mode
• Program Playback for audio CD
You can program the order of tr acks to play them back in
designated order.
• Random Playback for audio CD
This unit can shuffl e the order of tracks to play them back in
randomly.
Accessing from AUDIO button
During playback
• Choices for Audio Language and Stereo Sound Function
Select your desired languages or stereo sound function when
different options are available on your disc.
Symbols Used in this Manual
The following is the description for the symbols used in this
manual. Description refers to:
TV FUNCTIONS
ATS C
: Digital TV operation
NTSC
: Analog / Cable TV operation
• If neither symbol appears, the operation is applicable to
both.
DVD FUNCTIONS
DVD
: Playback of DVD-video
CD
: Playback of audio CD
• If neither symbol appears under the function heading,
operation is applicable to both.
7
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONSOPERATING DVD
CONNECTING DEVICES
INFORMATION USEFUL TIPS
8
10°
Supplied Accessories
Owner’s ManualQuick Start Guide
If you have any questions, please visit our website at
www.
sylvaniaconsumerelectronics .com
Quick
Start
EN
Installation
FR
Installation
ES
Instalación
Remote Control
(NF033UD)
TV base and 3 screws
(M4 x 12 )
Batteries
(AA, 1.5V x 2)
AA
AA
Note
• If you lose the screws, please purchase M4×12 Phillips head screws
at your local store.
• If you need to replace these accessories, please refer to the par t
No. with the illustrations and call our toll free customer support
line found on the cover of this manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your
remote control for more details.
• We do not guarantee 100% interoperability with all universal
remote controls.
Registration card
Mounting the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
• Recommended screw dimension : 0.201 x 0.788 inches (5.1 x 20 mm)
rear of this unitrear of this unit
screw holesscrew holes
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction.
1 Spread a thick and soft cloth over a table as shown at step 2.
Place the main unit face down onto it. Make sure not to
damage the screen.
2 Insert 2 hooks under the
bottom of the main unit into
➁
base holes. (shown by arrow
), then move the base in
➀
the direction as shown by
arrow ➁ until it stops and the screw holes are aligned.
Make sure not to put the AC power cord between the
base and the unit.
3 Drive Phillips head screws
➀
into the 3 threaded holes at
the bottom of the base until
they are tight.
To remove the base from this unit
• Unscrew the Phillips head screws in step 3.
After the screws are removed, move the base in the opposite
direction as shown by arrow in step 2, then pull the base up toward
the rear of the unit. Be careful not to drop the base when you
remove it.
Note
• When attaching the base , ensure that all screws are tightly fastened.
If the base is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.
• Make sure to use a table which can suppor t the weight of this unit
and is larger than this unit.
• Make sure the table is in a stable location.
• When attaching the base , ensure that FRONT ↑ written on the
base is upward. If it’s not upward, the 2 hooks don’t fi t in the base.
Installing the Batteries
Install the batteries (AA, 1.5V x 2) matching the polarity
indicated inside battery compar tment of the remote control.
Note
• When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
Tilt Stand
You can adjust the stand to
-2.5°
change the angle of the unit
(-2.5° to 10°).
Battery Precautions:
• Be sure to follow the correct polar ity as indicated in the battery
compartment. Reversed batteries may cause damage to the
device.
• Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible batter y
leakage.
• Do not try to recharge batteries; they can overheat and rupture .
Remote Control Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 INPUT SELECT
2 POWER
3 Number buttons
4 SETUP
5 ENTER
6 ▲/▼/◄/►(cursor)
7 B ACK
8 CH RETURN
9 VOL. ▲/▼
10
11 SKIP H / G
12 PAUSE F
➠
Press to turn the unit on and go into standby mode. To
completely turn off the unit, you must unplug the AC
power cord.
➠
- (hyphen)
• Press to shift the subchannel from the main channel.
+10 button
• Press to select 10 or higher number of chapters.
➠
➠
Press to return to previously viewed channel.
MUTE ➠ p. 15
Press to skip forward or backward chapters, titles (DVD)
or tracks (CD).
TV mode
• Press to pause screen image.
DVD mode
• Press to pause the disc playback.
➠
➠
➠
➠
➠
➠
➠
15
16
17
18
19
20
21
11
22
23
24
25
p. 14
p. 13
p. 14
p. 17
p. 13
p. 13
p. 16
p. 14
p. 15
p. 30
p. 14, 29
English
13 DISC MENU ➠ p. 29
14 TITLE
15 A EJECT
16 AUDIO
Digital mode (DTV)
• Press to select the audio language.
Analog mode (TV)
• Press to select the audio mode.
DVD mode
• Press to select the audio language (DVD), or sound
mode (CD).
17 SLEEP ➠ p. 14
Press to activate the sleep timer.
18 SCREEN MODE ➠ p. 15
Press to select aspect ratio available for the TV screen.
19 INFO ➠ p. 16, 32
Digital mode (DTV)
• Press to display the channel information, signal type and
TV setting.
Analog mode (TV)
• Press to display the channel number, signaltype and TV
setting.
External input mode
• Press to display the external input mode, signal type
and TV setting.
DVD mode
• Press to display the current status.
20 CH ▲/▼
21 REV E / FWD D
22 STOP C
23 PLAY B
24 CLEAR
• Press to clear the numbers entered incorrectly.
• Press to cancel the point A for A-B repeat.
• Press to remove the track number in program input
(CD).
25 MODE ➠ p. 7
• Press to arrange the playing order or playback
randomly (CD).
• Press to set the black level (DVD) and the virtual
surround on or off.
• Press to change the camera angle to see the sequence
being played back from different angle (DVD).
• Press to search chapter, title (DVD), track (CD) or time.
• Press to set the marker.
• Press to repeat playback chapter, title (DVD), track, disc
(CD) repeatedly or between designated point A and B.
• Press to magnify the part of picture (2x and 4x : DVD).
• Press to select the subtitles on the disc (DVD).
p. 29
➠
p. 29
➠
p. 7, 15, 32
➠
p. 14
➠
p. 29, 30
➠
p. 29
➠
p. 29
➠
p. 30, 31
➠
9
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONSOPERATING DVD
CONNECTING DEVICES
INFORMATION USEFUL TIPS
10
Control Panel
7516432
1 (power)
Press to turn the unit on and go into standby mode. To
completely turn off the unit, you must unplug the AC
power cord.
2 B (play)
3 C (stop)
4 A (eject)
5 CH ▲/▼
Press to select channels or move up (▲) / down (▼)
8
9
10
11
through the main menu items.
6 SETUP
▲/▼
7 VOL
Press to adjust the volume or move right (▲) / left (▼)
through the main menu items.
8 DVD indicator
Lights up orange when a disc is inserted.
9 STAND BY indicator
Lights up red when the unit goes into standby mode.
10 POWER ON indicator
Lights up green when power is on.
11 Infrared sensor window
Receives infrared rays transmitted from the remote
control.
➠
➠
➠
➠
➠
➠
➠
p. 13
p. 29
p. 29
p. 29
p. 14
p. 17
p. 15
Terminals
HDMI 2
HEAD PHONE
16
17
18
19
20
21
22
23
HDMI 2
HEAD PHONE
Side Panel
12 HDMI 2 Input jack
15
13 S-Video / Composite Video / Audio (L/R) Input jacks
for VIDEO
14 Headphone Audio Output jack
*
Headphone connection for personal listening.
p. 12, 34
➠
p. 34, 35
➠
Rear Panel
15 Antenna Input jack
12
16 Disc loading slot
17 AC power cord
18 PC (VGA) Input jack
19 HDMI 1 Input jack
20 Component Video and Audio (L/R) Input jacks
13
21 Digital Audio Output jack
22 Analog Audio (L/R) Input jack for PC connection
14
Mini-plug audio cable connection from PC.
p. 12
➠
p. 29
➠
p. 12
➠
p. 35
➠
p. 12, 34
➠
p. 12, 34
➠
p. 35
➠
p. 35
➠
23 Analog Audio (L/R) Input jacks for HDMI 1
Audio cable connection from a DVI device.
(For HDMI 1 Input jack only)
➠
p. 34
English
11
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONSOPERATING DVD
Note for service terminal
service terminal (service use only)
*
• Use this ter minal only when a software update is necessary.
• User should not connect any devices to the ser vice terminal such
as digital camera, keyboard, mouse , etc. (because these will not
work).
• The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
CONNECTING DEVICES
INFORMATION USEFUL TIPS
12
PREPARATION
No supplied cables are used with these connections:
• Please purchase the necessar y cables at your local store.
Before you connect:
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
Antenna Connection
Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.
VHF / UHF VHF / UHF
analog analog
or or
DTV antennaDTV antenna
RF coaxial cableRF coaxial cable
or
cable TV signalcable TV signal
Once connections are completed, turn on the unit and begin
initial setup. Channel scanning is necessary for the unit to
memorize all available channels in your area. [Initial Setup]
p. 13
➠
Note
• If you have any question about the DTV’s antenna, visit
www.antennaweb.org for further information.
• Depending on your antenna system, you may need different types
of combiners (mixers) or separator s (splitters). Contact your local
electronics store for these items.
• For your safety and to avoid damage to this unit, please unplug the
RF coaxial cable from the antenna input jack before moving the
unit.
• If you did use an antenna to receive analog TV, it should also
work for DTV reception. Outdoor or attic antennas will be more
effective than a set top or inside antenna.
• To switch your reception source easily between antenna and cable,
install an antenna selector.
• If you are not receiving a signal from your cable service, contact the
Cable provider.
Connection to Cable Receiver or
Satellite Box
Use an HDMI or component video cables to connect the
HDMI or the Component Video Input jacks of the unit to
the HDMI or the component video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect audio cables to the Audio L/R Input jacks right beside
the Component Video connector.
or
component video cables component video cables
(red / blue / green) and audio cables(red / blue / green) and audio cables
HDMI OUT
HDMI cableHDMI cable
AUDIO OUT
or
cable receiver /cable receiver /
satellite boxsatellite box
satellite dishsatellite dish
cable TV signal cable TV signal
including PPVincluding PPV
RL
or
COMPONENT VIDEO OUT
STEREO
PCM
RF coaxial cableRF coaxial cable
You can also connect this unit to the cable receiver or satellite
box other than the HDMI or the component video output jacks
because they might have different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may
differ depending on the cable / satellite provider.
For more information, please contact your cable / satellite provider.
Note
• Use an HDMI cable with the HDMI logo (a cer tifi ed HDMI cable).
High Speed HDMI cable is recommended for the better
compatibility.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this
range may result in fi re or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be
performed for a few seconds. This is not a malfunction.
(red)(red)(blue)(blue)(green)(green)
Pr/CrPb/CbY
ANT IN
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
English
4 Use ◄/► to select the desired location setting, then press
ENTER.
Initial Setup
13
INTRODUCTION PREPARATION
Initial Setup
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
Before you begin:
Make sure the unit is connected to antenna or cable.
1 After making all the necessary connections,
press POWER to turn on the unit.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
2 Use ▲/▼ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen, then press ENTER.
3 Use ▲/▼ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press ENTER.
Initial Setup
0 ch
0 ch
Antenna
Cable
Skip
Skip
Make sure the antenna is connected to ''ANT. IN'' jack.
Select your signal source.
Antenna
Cable
Select
Or
ENTER
EnterBackSkip
• [Autoprogram] will begin.
Initial Setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Digital channels
Analog channels
ANT.IN
Select “Retail” or “Home” for your location.
Retail
Select
• Select [Retail] store, the unit will be set up with
predefined setting for retail displays. In this setting, the
power consumption may possibly exceed the limited
requirement of the ENERGY STAR
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference.
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
Home
ENTER
Enter
®
qualification.
Note
• If you are not receiving a signal from your cable service, contact
the Cable provider.
• If you press POWER or SETUP during autoprogram, this setting
will be canceled.
• The initial autoprogr am function can be executed for either
[Antenna] or [Cable] only once. When you change the
connection (Antenna / Cable), set [Autoprogram] again. ➠ p. 19
• If there is no signal input from the antenna ter minal and no
operation for several seconds after you turn on the unit, helpful
hints appears. Follow the instructions listed on the TV screen.
Initial Setup
Retry
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the “ANT. IN” jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to the
box and press “INPUT SELECT” key on the remote control to
select the appropriate source input.
ENTER
Select
• You must set [Home] in step 4. Otherwise, [Picture] and [Sound]
settings you adjusted will not be memorized after the unit goes
into standby mode.
After an initial setup is completed...
• If you want to scan the channels automatically again.
[Autoprogram]
➠
EnterSkip
p. 19
Later
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels]
➠
p. 20
• If you want to change to another language.
[Language]
➠
p. 25
• If you want to change the location setting.
[Location]
➠
p. 24
WATCHING TV
USING FUNCTIONSOPERATING DVD
CONNECTING DEVICES
INFORMATION USEFUL TIPS
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.