CAFÉ SERIES CONICAL BURR
COFFEE GRINDER
User Guide
EMM0500BK
XxxContents
2 - 3 Sunbeam’s Safety Precautions
4 - 5 Features of your Café Series Conical Burr Coffee Grinder
6 Functions of your Café Series Conical Burr Coffee Grinder
7 - 8 Operating your Café Series Conical Burr Coffee Grinder
9 Adjusting the grind setting
10-12 Care and cleaning
13 Warranty
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR CAFÉ
SERIES CONICAL BURR COFFEE GRINDER
•
Check the grinding bowl for the presence of
foreign objects before using.
• Always operate the grinder with the ground
coffee container properly inserted in the
grinder.
• Do not place your hand in or near the burrs
while the grinder is in operation.
• Always place the unit on a flat, level surface.
• Switch off and unplug at power point before
cleaning.
• Do not attempt to re-grind ground coffee.
2
XxxSunbeam’s Safety Precautions
Sunbeam is very safety conscious when designing and manufacturing consumer products,
but it is essential that the product user also exercise care when using an electrical appliance.
Listed below are precautions which are essential for the safe use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
•
Always turn the power off at the power outlet
before you insert or remove a plug. Remove by
grasping the plug - do not pull on the cord.
•
Turn the power off and remove the plug when
the appliance is not in use and before cleaning.
•
Do not use your appliance with an extension
cord unless this cord has been checked and
tested by a qualified technician or
service person.
•
Always use your appliance from a power outlet
of the voltage (A.C. only) marked on
the appliance.
•
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
•
Children should be supervised to ensure that
they do not play with the appliance.
•
The temperature of accessible surfaces may
be high when the appliance is operating.
•
Never leave an appliance unattended while
in use.
•
Do not place on top of any other appliance.
•
Do not use an appliance for any purpose other
than its intended use.
•
Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
•
Do not let the power cord of an appliance hang
over the edge of a table or benchtop or touch
any hot surface.
•
Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre for
examination, repair or adjustment.
•
For additional protection, appliance should
be supplied through a residual current device
(RCD) having a rated residual operating current
not exceeding 30 mA;
•
Do not immerse the appliance in water or any
other liquid unless recommended.
•
Appliances are not intended to be operated by
means of an external timer or separate remote
control system.
•
This appliance is intended to be used in
household and similar applications such as:
staff kitchen areas in shops, offices and other
working environments; farm houses; by clients
in hotels, motels and other residential type
environments; bed and breakfast
type environments.
If you have any concerns regarding the performance and use of your appliance, please visit
the Sunbeam Website or contact Sunbeam Consumer Care - details are on the back page.
Ensure the above safety precautions are understood.
Important Instructions - retain for future use
3
3
Features of your Café Series Conical Burr Coffee Grinder
A
F
G
B
H
C
I
J
D
K
E
4
L
Features of your Café Series Conical Burr Coffee Grinder
A. 250g bean hopper
The 250g capacity bean hopper has a
shutter release mechanism for easy
removal and preventing accidental
spills. It allows the user to transfer any
un-used beans to an ideal storage unit
to preserve freshness.
B.
Grind adjustment collar
Large and easy to use, the collar has
a wide-range of 24 grind settings. The
coffee maker can select a fine grind to
suit commercial espresso or adjust the
setting for other brewing styles – from
Turkish to plunger. With such precise
settings the user controls the particle
size and ultimately the quality of the
brew.
C. Group handle cradle
D. Preparation mat
Positioned under the grinding spout the
preparation mat is ideal for catching
loose coffee grinds while filling directly
into the group handle. The mat can also
be used on the bench as a tamping pad.
E. Rubber feet
The non-slip rubber feet ensure the
grinder remains stable and prevents
slipping on the bench top during use.
H. Die-cast metal housing
Built to last, the heavy duty die-cast
metal body encases a powerful motor
and provides a stable base for the
grinder.
I. Grind on demand button
Position the group handle into the
group handle cradle, push against the
button and freshly ground coffee will
flow directly into the filter basket.
Pull the group handle away
and grinding will stop.
J. Operation switch
Switch to 'On' to grind continuously into
a container. 'Off' to stop or 'Auto' for
grinding directly into the group handle.
K.
Cord wrap
Cord wraps away to keep bench top
clean.
L. Burr cleaning brush
Strong bristles help sweep out grinds
from the burrs.
Accessories
M. Commercial size group handle cradle
N. Domestic size group handle cradle
F. Burr shield
G. Italian conical burrs
Italian designed and manufactured,
the metal conical burr design achieves
excellent grind consistency and
minimises heat transfer to the coffee
due to the slowly rotating burrs.
M N
O. Silicone spout
P. Commercial size dosing funnel
Q. Domestic size dosing funnel
O
P
Q
5