Stealth Cam
STC-WD3RT
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
STC-WD3RT
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 211662
Bedford, Texas 76095
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam is covered by a One Year Limited Warranty on parts & labor from the date of purchase. The warranty covers defects in workmanship & materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally. Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. Original sales receipt must be produced for any warranty service. Questions call 877-269-8490
www.stealthcam.net Toll Free 877-269-8490 |
2 |
STC-WD3RT
Manual Contents
Warranty |
2 |
Camera overview |
4 |
Camera kit contents |
8 |
Battery and memory Installation |
9 |
Set up and programming |
13 |
Using the camera |
22 |
Viewing & Deleting images |
32 |
Using Solar Panel |
40 |
CF Memory Card Compatibility Chart |
42 |
Technical Specs |
43 |
General Information |
46 |
www.stealthcam.net Toll Free 877-269-8490 |
3 |
STC-WD3RT
Camera overview
Front housing image with major parts indication.
For use with Stealth Cam cable only. (sold separately)
www.stealthcam.net Toll Free 877-269-8490 |
4 |
STC-WD3RT
Open view image with major parts indication
www.stealthcam.net Toll Free 877-269-8490 |
5 |
STC-WD3RT
Side view with major parts indication
For use with Stealth Cam exclusive Monitor / TV sold separately
www.stealthcam.net Toll Free 877-269-8490 |
6 |
STC-WD3RT
Picture / Image Capacity
CF card |
High |
Med |
Low |
Base |
AVI |
|
3.0M |
2.0M |
1.3M |
0.3M |
(10 sec) |
||
|
||||||
16MB |
20 |
26 |
40 |
80 |
8 |
|
|
|
|
|
|
|
|
32MB |
40 |
52 |
80 |
160 |
16 |
|
|
|
|
|
|
|
|
64MB |
80 |
104 |
160 |
320 |
32 |
|
|
|
|
|
|
|
|
128MB |
160 |
208 |
320 |
640 |
64 |
|
|
|
|
|
|
|
|
256MB |
320 |
416 |
640 |
1280 |
128 |
|
|
|
|
|
|
|
|
512MB |
640 |
832 |
1280 |
2560 |
256 |
|
|
|
|
|
|
|
|
1G |
1280 |
1664 |
2560 |
5120 |
512 |
|
|
|
|
|
|
|
|
2G |
2560 |
3328 |
5120 |
10240 |
1024 |
|
|
|
|
|
|
|
NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card. These figures may vary depending on the amount of detail in the image.
www.stealthcam.net Toll Free 877-269-8490 |
7 |
STC-WD3RT
Camera kit contents
•Model STC-WD3RT Digital Scouting Camera
•CDROM (Contains Ulead Photo Express 8 and camera driver)
•User Manual.
•1.5M USB cable.
•1.5M TV out cable for TV (RCA Jack).
•1.5M TV out cable for handheld TV (Mini Jack).
•Strap.
•Tree screw with nut.
•Washer x 2.
www.stealthcam.net Toll Free 877-269-8490 |
8 |
STC-WD3RT
Battery & memory installation.
The Stealth Cam STC-WD3RT Advanced Digital Scouting Camera is designed to operate using two different types of battery power options.
NOTE: Always have camera in OFF position when installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 6 “C” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries in correct polarity (+/-) as noted inside battery compartment.
www.stealthcam.net Toll Free 877-269-8490 |
9 |
STC-WD3RT
12V Lead Acid external battery.
The STC-WD3RT is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877-269-8490. Only Stealth Cam external battery accessories are recommended.
•Make sure the camera power switch is OFF and power source switch on BATTERY.
•Insert the battery pack plug into the DC 12V jack of the bottom of camera housing
•Turn the camera power on.
www.stealthcam.net Toll Free 877-269-8490 |
10 |
STC-WD3RT
Please make sure the voltage and polarity (+/-) are correct before connection. Incorrect voltage or polarity (+/-) will damage the camera.
Memory Options.
Your STC-WD3RT camera is equipped with 32MB built in flash memory, the camera is also equipped with an expendable media card slot capable accepting up to 2GB Compact Flash card (sold separately), With no memory card inserted into the slot, the camera will use the built in 32MB memory. If a CompactFlash card is inserted into the slot then the camera will bypass the built in memory and utilize the compact flash memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images in the expansion card.
www.stealthcam.net Toll Free 877-269-8490 |
11 |
STC-WD3RT
Inserting CF card.
Make sure camera is in the OFF position when ever adding or removing memory.
•Insert CF memory card in to the CF card slot completely and in the correct direction as shown by the sticker located at the top of the housing.
•To remove the CF memory card by press the eject button which is on the upper of the card.
Compact flash cards must be clean (no images from other sources), if you are using the CF card from other cameras, please make sure to format the CF card prior use in the STC-WD3RT. New cards are good to use straight from the package.
www.stealthcam.net Toll Free 877-269-8490 |
12 |
STC-WD3RT
Set up and Programming.
When the camera is first turned on the internal LCD screen displays the camera status. The following information is present on this screen.
If no buttons are pressed after 30 seconds the LCD screen will power down to conserve battery life. To re-power the screen press and hold the UP or DOWN button for at least 5 seconds.
www.stealthcam.net Toll Free 877-269-8490 |
13 |
STC-WD3RT
•Time out: To set the amount of time in minutes the camera will sleep between PIR triggering.
•Auto Flash: In low light conditions the flash will automatically activate.
•Capture mode: The capture mode that you have selected. o 1P: Single image capturing per PIR triggering.
o 2P: Two images continuous capturing per PIR triggering. o 3P: Three images continuous capturing per PIR triggering. o Video: Taking 10 seconds video per PIR triggering.
o Manual: Manual capturing by press manual shutter to operate only. (use as point and shoot camera)
•Resolution: The resolution selection that you have selected.
o |
2048 x 1536 |
3.0M: Select this option to capture a 3.0M |
|
|
pixels image. (High image quality) |
|
|
o |
1280 x 1024 |
1.3M: Select this option to capture a 1.3M |
|
|
www.stealthcam.net Toll Free 877-269-8490 |
14 |
|
STC-WD3RT pixels image. (Medium image quality)
o640 x 480 VGA: Select this option to capture a 300K pixels image. (Low image quality)
o320 x 240 Video resolution: This is the resolution during Video capturing and resolution is 100K pixels.
•Batteries Status: It shows the battery status.
oFull: It shows the batteries are full.
o Half: It shows the batteries are half.
o Low: It shows the batteries are low and front battery indicator will be on also.
When the camera has detected low batteries, (Batteries are lower then 6.6 +/-0.2Volts) the camera unit will power off within 30 seconds automatically. Please replace with new batteries; otherwise the camera will not work properly.
•Day and Time: It shows the date and time that you have set.
www.stealthcam.net Toll Free 877-269-8490 |
15 |
Loading...