INSTRUCTION MANUAL
Model #: STC U840IRS1
Toll Free 1 877 269 8490 |
WWW.STEALTHCAM.COM |
Version 6.0 |
08/11 |
TABLE OF CONTENTS
Camera overview |
4 |
Camera Kit contents |
7 |
General Information |
8 |
Quick Start Guide |
9 |
Battery and Memory Installation |
10 |
Setup and Programming |
13 |
Using the Camera |
22 |
Viewing & Deleting Files |
26 |
Memory Compatibility chart |
29 |
Technical Specifications |
30 |
Image Capacity chart |
32 |
Moon Phase chart |
33 |
Frequently Asked Questions (FAQs) |
34 |
FCC Compliance |
36 |
WWW.STEALTHCAM.COM |
3 |
Toll Free 877-269-8490 |
** IMPORTANT NOTE **
First, congratulations on purchasing one of the finest scouting cameras on the market today. We appreciate your business and want to prove to you we are committed to providing you the best product and support in the field.
By giving our customers a new state of the art web interface, which provides you with video tutorials and instruction on how to use the product in the most effective way.
TECHNICAL SUPPORT |
CUSTOMER SERVICE |
EMAIL: stealthcam@gsmorg.com |
CONTACT & HOURS |
Please allow 48hrs for response. |
Toll Free: 1 877 269 8490 |
Stealth Cam, LLC |
Call Center Hours: |
P.O. Box 539504 |
Mon Fri / 8 AM – 6 PM (CST) |
Grand Prairie, TX 75053 9504 |
www.stealthcam.com |
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a One Year Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally. A purchase from individuals or unauthorized internet sites such as eBay voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. A copy of your original sales receipt must be produced for any warranty service and a Return Authorization (RA) number must be obtained from customer service at 877 269 8490 prior to returning product.
WWW.STEALTHCAM.COM |
2 |
Toll Free 877-269-8490 |
CAMERA OVERVIEW
Front
WWW.STEALTHCAM.COM |
4 |
Toll Free 877-269-8490 |
Inside
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
CAMERA KIT CONTENT
•Model STC U840IRS1 Digital Scouting Camera
•User manual
•Strap
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
Side & Bottom view
5 |
WWW.STEALTHCAM.COM |
6 |
Toll Free 877-269-8490 |
GENERAL INFORMATION
Storing conditions
•Operating Environment: 14 to 104 deg F ( 10 to 40 deg C). 20 85% relative humidity, non condensing.
Special care instructions!!
•The camera is designed to be weather resistant. Never attempt to immerse the unit in water or any other liquid. This will damage the unit and void the warranty.
•Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers.
•Remove dirt or stains with a soft cloth dampened with water or neutral detergent. Keep your camera in a dry and cool dust free environment or container when it is NOT used.
•Take the batteries out, when camera is NOT to be used over an extended period of time.
•Avoid dropping your camera on to a hard surface.
•Do not disassemble your camera.
•Do not mix new and old batteries.
•Do not open the camera for unauthorized service. This could cause serious damage to the unit and WILL void the warranty.
NOTE: This camera is a precision electronic device. Do not attempt to service this camera yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
7 |
WWW.STEALTHCAM.COM |
8 |
Toll Free 877-269-8490 |
QUICK START GUIDE
This guide is designed to get you up and running in a matter of moments. To get the most out of this advanced scouting tools, please read the manual thoroughly before operating the camera. If you would like to modify any of the factory Default Settings, except for the Time & Date, please see manual for instructions.
FACTORY DEFAULT SETTINGS: |
|
Time Out: 30 Seconds |
Video Mode: 10 Seconds |
Resolution: Still Image (1.3Mp) / Video (VGA) |
Burst Mode: 1 Still Image |
Camera Set up:
1.Install 8 “AA” cell batteries in correct polarity (+/ ) as indicated in battery compartment.
2.Insert SD card into the camera.
3.Turn power on to adjust Time and Date.
Set Time & Date:
1.Switch the camera to the ON position.
2.Press the [MENU] button to enter menu settings screen.
3.Press the [UP] or [DN] button to scroll through different setting modes until the word TIME blinking.
4.Press the [OK] button to choose the Time settings.
5.Press the [UP] or [DN] button to adjust the Minute setting and press [OK] to confirm and move to the Hour setting.
6.Repeat to set Hour and then press [OK] to confirm and move to Date.
7.Adjust the Month, Day, and Year by using [UP] or [DN] button. Each time you finish an adjustment you must press the [OK] button to confirm and move to the next field for adjustment.
8.Once done, the word dEL – will be blinking.
9.Press the [MENU] button to exit and start using.
WWW.STEALTHCAM.COM |
9 |
Toll Free 877-269-8490 |
•Insert the external battery barrel plug into the DC 12V jack on the bottom of camera housing.
•Turn the camera power on.
NOTE: Please make sure the voltage and polarity (+/ ) are correct before connection. Incorrect voltage or polarity (+/ ) will damage the camera. When both internal and external batteries are connected, the camera will draw power from the higher voltage source first.
Memory Options
The camera is also equipped with an expandable media card slot capable of accepting up to 16GB SD card with Class 6 or below speed rating (sold separately). The front counter display will show the number of images stored on the SD card. If no SD card is inserted the front counter display will show “NOSd”.
WARNING: The above camera will not accept Class 10 or above speed rating SD memory cards.
WWW.STEALTHCAM.COM |
11 |
Toll Free 877-269-8490 |
BATTERY AND MEMORY INSTALLATION
WARNING: Do not use different Voltage lead acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty.
WARNING: ALWAYS have the camera in the OFF position when installing or removing batteries and memory card. Removing batteries or memory card while the camera is ON may damage the camera.
Your Stealth Cam Advanced Digital Scouting Camera is designed to operate using two different types of battery power options.
Batteries “AA” cell
The internal battery compartment accepts 8 “AA” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries with correct polarity (+/ ) as noted inside the battery compartment.
12V Lead Acid external battery
The camera is equipped with an external power jack designed to accept a barrel plug cable attached to a sealed lead acid battery. (Sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877 269 8490. Only Stealth Cam external battery accessories are recommended.
•Make sure camera is in the OFF position.
WWW.STEALTHCAM.COM |
10 |
Toll Free 877-269-8490 |
Inserting SD memory card
NOTE: Make sure camera is in the OFF position whenever adding or removing memory.
•Insert SD memory card in to the SD card slot completely and in the correct direction as shown by the sticker located at the side of the housing.
•To remove the SD memory card, depress the SD card and pull out the card gently.
•SD cards must be clean (no images from other sources). If you are using the SD card from other cameras, please make sure to format the SD card in your computer prior to use in your camera. New cards are good to use straight from the package.
FORMAT – Definition: When you format a SD memory card, the operating system erases all information and files on the card. Then it creates an internal address tables that it later uses to locate information and files. Formatting also removes all Hidden System files as well. Basically it cleans your SD memory card just like if it was brand new. Please make sure to follow the guidelines listed below:
SD Card size: 2Gb or below, format using File System type “FAT”. SD Card size: 4GB or above, format using File System type “FAT32”.
Do not use File System type “NTFS” or “exFAT”, these formats are not supported.
WWW.STEALTHCAM.COM |
12 |
Toll Free 877-269-8490 |
Loading...