How it Works
Stealth Cam
Loading...
STC-IR1
User Manual
42 pgs367.08 Kb0

Stealth Cam STC-IR1 User Manual

Stealth Cam
STC-IR1
User manual
Tool Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.0 June/05
STC-IR1
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 211662
Bedford, Texas 76095
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam is covered by a One Year Limited Warranty on parts & labor from the date of purchase. The warranty covers defects in workmanship & materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally. Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. Original sales receipt must be produced for any warranty service. Questions call 877-269-8490 any warranty service. For warranty service please call 1-877-269-849 0.
2
STC-IR1
Manual Contents
Camera overview 4 Memory Capacity 8 Camera kit contents 9 Battery and memory Installation 10 Set up and programming 13 Camera use 19 Manual Shooting Mode 25 Viewing & Deleting images 26 Technical Specs 39 General Information 41
3
Camera Overview
Stealth Cam [Front Housing]
Shutter Button
STC-IR1
Viewfinder Passive Infrared
Sensor (PIR)
Front LCD Display
Test Indicator
Light Sensor
Low Battery Indicator
www.stealthcam.net Toll Free 877-269-8490
Camera Lens
IR Light
Lock Hole
4
DC Jack Port Solar Port
STC-IR1
Stealth Cam [Bottom View]
Tree Screw Mount
www.stealthcam.net Toll Free 877-269-8490
5
STC-IR1
Stealth Cam [Open View]
Status LCD Display TFT-LCD Display
Test Button
ON/OFF Switch
Menu Button Select Button
Delete Button Distance Adjust
DOWN Button
Battery Compartment Cover
UP Button
www.stealthcam.net Toll Free 877-269-8490
6
STC-IR1
Stealth Cam [Side View]
Video-out Jack
Stealth Cam [Back View]
www.stealthcam.net Toll Free 877-269-8490
CF Card Slot
Mounting Strap Slots
7
STC-IR1
Memory Capacity
When "FULL"("F") is displayed on the front LCD screen this indicates that the memory is full.
High resolution - 5M 2560 X 1920 Medium resolution - 3.1M 2048 X 1536 Low resolution - 1.3M 1280 X 960 AVI motion clip file - 320 x 240 (10 sec per motion clip)
High
Med Low
AVI
Note: The Memory Capacity chart is for user's reference only. Actual number of image capacity is subject to the hues and color saturation of the picture shooting environment and the subject details.
32MB 64MB 128MB 256MB 512MB 1G
21 42 85 170 341 682 29 59 118 237 474 948 59 119 23 476 953 1906 17 35 70 140c 281 562
8
STC-IR1
Camera kit contents
• Model STC-IR1 Infrared Digital Scouting Camera
• CDROM (Contains ArcSoft Photo Impression and camera driver)
• User Manual.
• 1.5 USB cable.
• 1.5 TV out cable for TV (RCA Jack).
• 1.5 TV out cable for handheld TV (Mini Jack).
• Strap.
• Tree screw with nut.
• Washer x 2.
• Lock plate
9
STC-IR1
Using Internal D Size Battery Power Option
1. Open the housing
2. Remove the battery cover.
3. Make sure camera power switch is in the OFF position.
4. Install 8 "D Size" batteries. "Premium quality alkaline batteries designed for digital cameras are recommended for optimum performance"
5. Replace battery cover.
12V Lead Acid external (Sold separately)
Power source spec recommended: 12V / 8AH Lead-Acid Battery
o Make sure camera is turned to OFF. o Make sure the power cable to the lead acid battery is connected
to the correct polarity.
o Firmly insert barrel plug in the 12V jack on bottom of camera. o Only Stealth Cam accessory Lead-Acid Battery is
recommended for this unit.
o Lead-Acid Battery performance is subject to weather conditions,
Invisible Infrared Illuminator activity and user settings.
10
STC-IR1
Memory Options
Your Stealth Cam STC-IR1 comes with 32MB of built in flash memory . The camera is also equipped with an expandable media card slot capable of accepting up to a 1GB Compact Flash card (sold separately). With no memory card inserted into the slot; the camera will use the built in 32MB memory. If a compact flash card is inserted into the slot then the camera will bypass the built in memory and utilize the compact flash memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images on the expansion card.
o The camera should be in the OFF
position when adding or
removing memory cards.
o Make sure to format the CF card prior to use in STC-IR1. New
cards are good to use straight from the package.
o Insert the memory card with the top of the card facing the front
of the camera. Slide card all the way into the slot until it locks in place.
o To remove the card: Make sure the power is off. Simply pull
the card out.
11
STC-IR1
Figure 2
www.stealthcam.net Toll Free 877-269-8490
12
STC-IR1
Set up and Programming
Familiarize your self with the location of the different buttons before programming the camera settings as it is helpful to look at the front LCD display while performing the various functions.
Setting the continuous capture program
Continuous capture is the number of images the camera will record each time the PIR coverage area is intruded.
Note: Allow 3 seconds between pressing MENU button when navigating through the setting modes.
o Open the housing. o Move the ON / OFF switch to ON. It will take approximately 5
seconds for the camera to power ON. After the camera has powered ON you have 30 second to begin programming before the camera enters detection mode.
o Once the camera has powered ON the LCD display on the front
housing will read as illustrated in figure 1.
PIR on the display indicates the PIR (Passive Infrared Motion Sensor)
13
Loading...
+ 29 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use