Stealth Cam STC-I530IR User Manual
STC-I530IR
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 6.0 09/15
STC-I530IR
2
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.stealthcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a One Year Limited Warranty
on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites such as eBay voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877-269-8490 prior to returning product.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
3
Manual Contents
Camera overview 4
Camera kit contents 7
Battery and memory installation 8
Set up and programming 12
Camera use 19
Mounting the camera 20
Viewing & deleting images 25
Memory compatibility chart 33
Technical specs 34
General information 37
Image capacity chart 39
Moon phase chart 41
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
4
Camera overview
Front housing image with major parts indication.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
5
For use with Stealth Cam cable
only. (sold separately)
Open view image with major parts indication
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
6
Side view with major parts indication
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
7
Camera kit contents
Model STC-I530IR Digital Scouting Camera
User manual
USB cable
Strap
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
8
Warning: Do not use different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
Battery & memory installation
Your Stealth Cam Advanced Digital Scouting Camera is designed to
operate using two different types of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in operation
may damage the camera.
Batteries “C” cell:
The internal battery compartment accepts 6 x “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install batteries
with correct polarity (+/-) as noted inside the battery compartment.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
9
12V Lead Acid external battery
The camera is equipped with an external power jack designed to
accept a barrel plug cable to attach to a sealed lead acid battery. (sold
separately). This will enhance the camera’s field life. Battery cable and
complete 12V Lead Acid battery kits are available wherever Stealth
Cam scouting cameras are sold or call toll free 877-269-8490. Only
Stealth Cam external battery accessories are recommended.
Insert the external battery barrel plug into the DC 12V jack on
the bottom of camera housing
Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.
Please note: When both internal and external batteries are connected,
the camera will draw power from the higher voltage
source first.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
10
Memory Options
Your camera is equipped with 32MB built in flash memory. The camera
is also equipped with an expandable media card slot capable of
accepting up to 2GB SD card (sold separately). With no memory card
inserted into the slot, the camera will use the built in 32MB memory. If
an SD card is inserted into the slot then the camera will bypass the built
in memory and utilize the SD memory. The front counter display will
show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only show the
number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side
of the housing.
To remove the SD memory card, depress the SD card and pull
out the card gently.
SD cards must be clean (no images from other sources).
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
11
If you are using the SD card from other cameras, please
make sure to format the SD card in your computer prior to
use in your camera. New cards are good to use straight
from the package.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
12
Set up and Programming
When the camera is first turned on, the internal LCD screen
displays the camera status. The following information is present
on this screen.
IR Emitter Mode Control:
The camera is pre-programmed with Auto IR Emitter setting.
Switch the camera to ON position.
To turn off the IR Emitter mode, press the [UP]
button once within 30 seconds. icon will
appear on the top of the screen.
To turn on the IR Emitter mode back to Auto setting, press the
[UP] button the second time. icon will appear on the top of
the screen.
If no buttons are pressed after 30 seconds, the LCD screen will power
down to conserve battery life, and enter 1 minute count down to enter PIR
detection mode. To re-power the display screen, press and hold the UP
or DOWN button until the status screen appears.
www.stealthcam.net Toll Free 877-269-8490
STC-I530IR
13
Definitions
Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
IR Emitter:
o Auto – IR LED turns on base on surrounding light
conditions.
o Off – Turn off IR Emitter.
Capture mode:
o 1P ~ 9P : 1 to 9 burst mode image capturing per PIR
triggering.
o Video: 5 to 90 seconds adjustable video per PIR triggering.
Resolution:
o High: Select this option to capture a 5.0M pixels image.
(High image quality)
o Low: Select this option to capture a 3.0M pixels image.
(Low image quality)
o Base: Select this option to capture a 1.3M pixels image.
www.stealthcam.net Toll Free 877-269-8490
Loading...