Stealth Cam STC-I450 User Manual
Stealth Cam
STC-I450
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.1 07/07
STC-I450
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty on
parts and labor from the date of original purchase, and purchases must be made
through an authorized dealer. The warranty covers defects in workmanship and
materials. The warranty does not apply to units, which have been damaged or
abused intentionally or unintentionally. A purchase from individuals or
unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained from
customer service at 877-269-8490 prior to returning product
www.stealthcam.net Toll Free 877-269-8490
2
STC-I450
Manual Contents
Camera overview 4
Camera kit contents 8
Battery and memory Installation 9
Set up and programming 12
Camera use 19
Mounting the camera 20
Viewing & Deleting images 26
Memory compatibility chart 35
Technical Specs 36
General Information 39
www.stealthcam.net Toll Free 877-269-8490
3
STC-I450
Camera overview
Front housing image with major parts indication.
www.stealthcam.net Toll Free 877-269-8490
4
STC-I450
Open view image with major parts indication
For use with Stealth Cam cable
only. (sold separately)
www.stealthcam.net Toll Free 877-269-8490
5
STC-I450
Side view with major parts indication
www.stealthcam.net Toll Free 877-269-8490
6
STC-I450
Picture / Image Capacity
SD card High Low Base AVI
16MB 11 33 130 8
32MB 22 66 260 16
64MB 44 132 520 32
128MB 88 264 1040 64
256MB 176 528 2080 128
512MB 352 1056 4160 256
1 GB 704 2112 8320 512
2 GB 1408 4224 16640 1024
NOTE: Picture / Image Capacity Chart provides approximate number of
images or AVI movies based on resolution setting and the size of
memory card. These figures may vary depending on the amount of
detail in the image.
www.stealthcam.net Toll Free 877-269-8490
7
STC-I450
Camera kit contents
• Model STC-I450 Digital Scouting Camera
• CDROM (Contains Ulead Photo Explorer 8.0 and camera
driver)
• User Manual.
• 1.5M USB cable.
• 1.5M TV out cable for TV (RCA Jack).
• 1.5M TV out cable for handheld TV (Mini Jack).
• Strap.
www.stealthcam.net Toll Free 877-269-8490
8
STC-I450
Warning:
Battery & memory installation
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
Do not use different Voltage lead
The Stealth Cam STC-I450 Advanced Digital Scouting Camera is
designed to operate using two different types of battery power
options.
NOTE: Always have camera in the OFF position when installing or
removing batteries.
Batteries “C” cell
The internal battery compartment accepts 6 “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install
batteries with correct polarity (+/-) as noted inside the battery
compartment.
www.stealthcam.net Toll Free 877-269-8490
9
STC-I450
12V Lead Acid external battery
The STC-I450 is equipped with an external power jack designed to
accept a barrel plug cable to attach to a sealed lead acid battery.
(sold separately). Battery cable and complete 12V Lead Acid
battery kits are available wherever Stealth Cam scouting cameras
are sold or call toll free 877-269-8490. Only Stealth Cam external
battery accessories are recommended.
• Insert the external battery barrel plug into the DC 12V jack on
the bottom of camera housing
• Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.
Memory Options
Your STC-I450 camera is equipped with 32MB built in flash
memory. The camera is also equipped with an expandable
media card slot capable of accepting up to 2GB SD card (sold
separately). With no memory card inserted into the slot, the
www.stealthcam.net Toll Free 877-269-8490
10
STC-I450
camera will use the built in 32MB memory. If an SD card is
inserted into the slot then the camera will bypass the built in
memory and utilize the SD memory. The front counter display will
show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only
show the number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side
of the housing.
• To remove the SD memory card, depress the SD card and pull
out the card gently.
SD cards must be clean (no images from other sources), if
you are using the SD card from other cameras, please
make sure to format the SD card prior use in the STC-I450.
New cards are good to use straight from the package.
www.stealthcam.net Toll Free 877-269-8490
11
STC-I450
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The following information is present
on this screen.
Set Flash Control:
o Press [UP] button once to turn off the flash.
o Press [UP] button again to turn flash to Auto mode.
If no buttons are pressed after 30 seconds the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
screen press and hold the UP or DOWN button for at least 5
seconds.
www.stealthcam.net Toll Free 877-269-8490
12
Loading...