Stealth Cam STC-I430IR Instruction Manual
STC-I430IR
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.0 04/08
STC-I430IR
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.stealthcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty
on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877-269-8490 prior to returning product.
www.stealthcam.net Toll Free 877-269-8490
2
STC-I430IR
Manual Contents
Camera overview 4
Camera kit contents 7
Battery and memory Installation 8
Definitions 12
Set up and programming 14
Camera use 19
Mounting the camera 20
Viewing & Deleting images 25
Memory compatibility chart 32
Technical Specs 33
General Information 36
Image capacity chart 38
Moon Phase Chart 40
www.stealthcam.net Toll Free 877-269-8490
3
STC-I430IR
Camera overview
Front housing image with major parts indication.
www.stealthcam.net Toll Free 877-269-8490
4
STC-I430IR
Open view image with major parts indication
For use with Stealth Cam cable
only. (sold separately)
www.stealthcam.net Toll Free 877-269-8490
5
STC-I430IR
Side view with major parts indication
www.stealthcam.net Toll Free 877-269-8490
6
STC-I430IR
Camera kit contents
• Model STC-I430IR Digital Scouting Camera
• User Manual.
• USB cable.
• Strap.
www.stealthcam.net Toll Free 877-269-8490
7
STC-I430IR
Warning:
Battery & memory installation
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
Do not use different Voltage lead
The Stealth Cam STC-I430IR Advanced Digital Scouting Camera is
designed to operate using two different types of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in operation
may damage the camera.
Batteries “C” cell:
The internal battery compartment accepts 6 x “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install batteries
with correct polarity (+/-) as noted inside the battery compartment.
www.stealthcam.net Toll Free 877-269-8490
8
STC-I430IR
12V Lead Acid external battery
The STC-I430IR is equipped with an external power jack designed to
accept a barrel plug cable to attach to a sealed lead acid battery. (sold
separately).
complete 12V Lead Acid battery kits are available wherever Stealth
Cam scouting cameras are sold or call toll free 877-269-8490. Only
Stealth Cam external battery accessories are recommended.
• Insert the external battery barrel plug into the DC 12V jack on
• Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
Please note: When both internal and external batteries are connected,
This will enhance the camera’s field life. Battery cable and
the bottom of camera housing
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.
the camera will draw power from the higher voltage
source first.
www.stealthcam.net Toll Free 877-269-8490
9
STC-I430IR
Memory Options
Your STC-I430IR camera is equipped with 32MB built in flash memory.
The camera is also equipped with an expandable media card slot
capable of accepting up to 2GB SD card (sold separately). With no
memory card inserted into the slot, the camera will use the built in
32MB memory. If an SD card is inserted into the slot then the camera
will bypass the built in memory, and utilize the SD memory for image
storage. The front counter display will show the number of images on
the built in memory unless the expansion card is inserted at which point
the counter will only show the number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction, as shown by the SD picture printed at the
side of the housing.
• To remove the SD memory card, depress the SD card and pull
out the card gently.
www.stealthcam.net Toll Free 877-269-8490
10
STC-I430IR
SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please
make sure to format the SD card in your computer using
FAT formatting, not FAT32, prior to use in the camera.
New cards are good to use straight from the package.
www.stealthcam.net Toll Free 877-269-8490
11
STC-I430IR
Definitions
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• IR Emitter:
o Auto – IR LED turns on base on surrounding light
conditions.
o Off – Turn off IR Emitter.
• Capture mode:
o 1P ~ 9P : 1 to 9 burst mode image capturing per PIR
triggering.
o Video: 5 to 90 seconds adjustable video per PIR triggering.
• Resolution:
o 4.0M : Select this option to capture a 4.0M pixels image.
(High image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
(Low image quality)
www.stealthcam.net Toll Free 877-269-8490
12
Loading...