How it Works
Stealth Cam
Loading...
STC-AD3X V390Z
User Manual
49 pgs471.95 Kb0

Stealth Cam STC-AD3X V390Z User Manual

Stealth Cam
STC-AD3X
User’s Manual
Toll Free Customer Support 1-877-269-8490
www.stealthcam.net
Version 1.0 Dec/05
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 211662
Bedford, Texas 76095
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam is covered by a One Year Limited Warranty on parts
& labor from the date of purchase. The warranty covers defects in
workmanship & materials. The warranty does not apply to unit s, which
have been damaged or abused intentionally or unintentionally.
Tampering with or altering the unit will void the warranty. Any
unauthorized service will void warranty. Original sales receipt must be
produced for any warranty service. Questions call 877-269-8490
www.stealthcam.net Toll Free 877-269-8490
2
Manual Contents
Warranty 2 Camera overview 4 Camera kit contents 8 Battery and memory installation 9 Set up and programming 13 Using the camera 23 Manual shooting mode 31 Viewing and deleting images 33 Using external power 42 Memory compatibility chart 43 Technical specs 44 General information 48
www.stealthcam.net Toll Free 877-269-8490
3
Camera overview
Front housing image with major parts indication.
www.stealthcam.net Toll Free 877-269-8490
4
Open view image with major parts indication
www.stealthcam.net Toll Free 877-269-8490
5
Side view with major parts indication
www.stealthcam.net Toll Free 877-269-8490
6
Picture / Image Capacity
CF card High Low AVI
16MB 30 120 20 32MB 60 240 40
64MB 120 480 80 128MB 240 960 160 256MB 480 1920 320 512MB 960 2048 640
NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card. These figures may vary depending on the amount of detail in the image.
www.stealthcam.net Toll Free 877-269-8490
7
Camera kit contents
• Model STC-AD3X Digital Scouting Camera
• CDROM (Contains Lover’s Eye image editing software and
camera driver)
• User Manual
• 1.2M USB cable
• 1.5M TV out cable for TV (RCA Jack)
• 1.5M TV out cable for handheld TV (Mini Jack)
• Strap
• Tree screw with nut
• Washer x 2
• Lock plate
www.stealthcam.net Toll Free 877-269-8490
8
Battery & memory installation
The Stealth Cam STC-AD3X Advanced Digital Scouting Camera is designed to operate using two different types of battery power options.
NOTE: Always have camera in OFF position when installing or removing batteries.
Batteries “D” cell
The internal battery compartment accepts 8 “D” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries in correct polarity (+/-) as noted inside battery compartment.
Warning: Do not use different Voltage lead acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty.
www.stealthcam.net Toll Free 877-269-8490
9
6V Lead Acid external battery
The STC-AD3X is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (Sold separately) Battery cable and complete 6V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877-269-8490. Only Stealth Cam external battery accessories are recommended.
• Make sure the camera power switch is OFF.
• Insert the battery pack plug into the DC 6V jack of the bottom
of camera housing
• Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will damage the camera.
www.stealthcam.net Toll Free 877-269-8490
10
Memory Options
Your STC-AD3X camera is equipped with 32MB built in flash memory. The camera is also equipped with an expandable media card slot capable accepting up to 512MB Compact Flash card (sold separately). With no memory card inserted into the slot, the camera will use the built in 32MB memory. If a Compact Flash card is inserted into the slot then the camera will bypass the built in memory and utilize the compact flash memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images in the expansion card.
www.stealthcam.net Toll Free 877-269-8490
11
Inserting CF card
Make sure camera is in the OFF position when ever adding or removing memory.
• Insert CF memory card in to the CF card slot completely and in the correct direction as shown by the sticker located at the top of the housing.
• To remove the CF memory card by press the eject button which is on the upper of the card.
Compact flash cards must be clean (no images from other
sources), if you are using the CF card from other cameras, please make sure to format the CF card prior use in the camera. New cards are good to use straight from the package.
To ensure proper CF card formatting, insert the CF card into
the card slot and use your STC-AD3X cam to format the CF card. Please follow the steps in Section “Format Memory” on page 16 to format the CF card.
www.stealthcam.net Toll Free 877-269-8490
12
Set up and Programming Terms
• Time out: To set the amount of time in minutes the camera will sleep between PIR triggering.
• Flash Control:
o Auto: In low light conditions the flash will activate automatically. o Flash Off: Turn off flash light
• Capture mode: The capture mode that you have selected.
o 1 Shot: Single image capturing per PIR triggering. o 2 Shot: Two images continuous capturing per PIR triggering. o 3 Shot: Three images continuous capturing per PIR triggerin g. o AVI: Taking 10 seconds video per PIR triggering. o Manual: Manual capturing by pressing shutter button to
operate. (use as point and shoot camera or video camera under Test Mode)
• Image Resolution: The resolution selection that you have selected.
www.stealthcam.net Toll Free 877-269-8490
13
o 2048 x 1536 : Select this option to capture a High image
resolution.
o 1024 x 768 : Select this option to capture a Low image
resolution.
• Image Quality: The quality selection that you have selected.
o Economic = Low Quality o Normal = Normal Quality
Fine = Fine Quality
o
• the battery status.
Batteries Status: It shows
o
Full: It shows the batteries are full.
o Half: It shows the batteries are half. o Low: It shows the batteries are low and
front battery indicator
will be on also.
When tected low batteries, (Both set of
the camera has de batteries are lower then 4.5 +/-0.2Volts) the camera unit wil power off within 30 seconds automatically. Please replace w
www.stealthcam.net Toll Free 877-269-8490
l
ith
14
new batteries; otherwise the camera will not work properly.
recaution
P : When replacing batteries, replace the upper 4
batteries in the battery compartment with new ones first. After you
done this then replace the lower 4 batteries. Removing all 8
batteries at one time will result in the loss of date / time settin
Date and Time: It shows the date and time that you have set.
•
rogramming the Stealth Cam STC-AD3X
P
Slide the power switch to TEST position. You
will hear one beep and the Stealth Cam Logo will show on the LCD screen for about one second. Once you hear the second beep, you can press the MEN button to start your programming.
www.stealthcam.net Toll Free 877-269-8490
g.
U
15
Loading...
+ 34 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use