MAINTENANCE MANUAL
Volume 21st Edition
Serial No. 10001 and Higher : DVW-970 (SY)
Serial No. 40001 and Higher : DVW-970P (SY)
! WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
! WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
! AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
This manual is the maintenance manual volume 2 of Digital Camcorder DVW-970/
970P.
This manual is intended for use by trained system and service engineers, and
describes the information regarding the parts list, semiconductor pin assignments,
block diagrams, schematic diagrams and board layouts.
Beside this Maintenance Manual Volume 2, the following manuals are available for
the unit.
. Operation Manual (Supplied with this unit)
This manual is necessary for application and operation of this unit.
Part number: 3-863-930-0X
. Maintenance Manual Volume 1 (Available on request)
This manual intended for use by trained system and service engineers describes
(the circuit overview, character display functions, the main part replacements,
electrical alignment, etc.) required for parts-level service.
For obtaining, contact your local Sony Sales Office/Service Center.
Part number: 9-968-194-0X
This manual is the maintenance manual of the supplied viewfinder.
This manual is intended for use by trained system and service engineers, and
describes the information regarding the service overview, electrical alignment,
parts list, semiconductor pin assignments, block diagrams, schematic diagrams
and board layouts.
For obtaining, contact your local Sony Sales Office/Service Center.
Part number: 9-968-142-0X (DVW-970/970P)
. “Semiconductor Pin Assignments” CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
The maintenance manual contains a complete list of semiconductors and their ID
Nos., and thus should be used together with the CD-ROM.
Part number: 9-968-546-XX
DVW-970/V2 (J, E)
3 (E)
Section 1
Spare Parts
1-1.Notes on Repair Parts
1. Safety Related Components Warning
w
Components marked ! are critical to safe operation.
Therefore, specified parts should be used in the case of
replacement.
2. Standardization of Parts
Some repair parts supplied by Sony differ from those
used for the unit. These are because of parts commonality and improvement.
Parts list has the present standardized repair parts.
3. Stock of Parts
Parts marked with “o” at SP (Supply Code) column of
the spare parts list may not be stocked. Therefore, the
delivery date will be delayed.
4. Harness
Harnesses with no part number are not registered as
spare parts.
In need of repair, get components shown in the list and
repair using them.
1-1.
DVW-970/V2 (J, E)
1-1
Drum, Cleaning and Gear Block
1-2.Exploded Views
19
5
PRECISION
P2 x 2
39
17
4
STOP RING 3.0
31
36
35
21
20
1
21
32
12
41
2
28
21
23
41
42
11
13
18
33
30
41
*2
21
40
3
43
10
6
17
B2 x 4
7
41
14
16
41
38
15
29
21
34
PRECISION
P1.4 x 1.4
41
22
37
8
9
*2
41
*1
27
21
25
24
21
21
*1
41
16
14
26
1-2
DVW-970/V2 (J, E)
No. Part No. SP Description
1 A-8279-470-C o GEAR BLOCK ASSY
2 A-8279-478-C o EJECT ASSY,MANUAL
3 A-8279-479-E s CLEANING ASSY
4 A-8326-898-A s BRUSH ASSY (RP)
5 A-8326-899-A s RING ASSY (RP) SLIP
6 A-1132-473-A s DJH-42A-R (NTSC)
A-1132-475-A s DJH-43A-R (PAL)
7 A-1132-474-A s DJR-42-R (NTSC)
A-1132-476-A s DJR-43-R (PAL)
8 X-3605-974-1 o BASE ASSY,MOTOR
9 X-3605-995-2 o PLATE(B) ASSY,GEAR
10 X-3605-996-2 o BASE ASSY,CLEANING
11 X-3605-997-5 o ARM ASSY,CLEANING
12 X-3605-998-1 o BASE ASSY,EJECT,MANUAL
13 X-3949-109-1 s ROLLER ASSY,AHC
14 1-543-316-22 s HEAD,SENSING (SMALL TYPE)
15 1-698-003-11 s MOTOR, DC
16 2-279-715-11 s RIVET,NYLON
17 2-640-315-02 o SCREW (M2X5), SMALL (STEEL)
18 3-182-765-02 s SPACER, CR (POM)
19 3-204-765-01 s COVER, BRUSH
20 3-351-715-01 s SPRING,COMPRESSION (COIL) (ST)
21 3-559-408-11 s WASHER,POLYETHYLENE,DIA.1.2
22 3-603-570-03 s GEAR,WORM
23 3-603-571-01 o WHEEL,WORM
24 3-629-202-01 o GEAR (C)
25 3-629-211-01 o GEAR(D)
Drum, Cleaning and Gear Block
26 3-629-212-03 o HOLDER,TOP SENSOR
27 3-629-225-01 o GEAR (E)
28 3-629-269-03 o GEAR (CLEANING)
29 3-629-286-05 o STOPPER,CASSETTE
30 3-629-300-03 o HOLDER,CAM,CLEANING
31 3-629-301-01 o GEAR(B),EJECT,MANUAL
32 3-629-303-02 o GEAR(A),MANUAL,EJECT
33 3-629-304-03 o ROLLER,CAM,CLEANING
34 3-629-307-01 o ARM(B),CLEANING
35 3-629-309-03 o ROLLER,MANUAL EJECT
36 3-629-310-03 s SPRING,COMPRESSION
37 3-631-663-01 s SPRING,EXTENTION
38 3-631-664-01 o JOINT
39 3-681-351-12 s BOLT (WASHER) (M2),HEXAGON
40 3-729-011-01 s SPRING, COMPRESSION(COIL) (ST)
41 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
42 3-729-076-01 s SCREW +B 2X3 (STEEL)
43 3-908-986-01 s SPRING (ARM)
DVW-970/V2 (J, E)
1-3
S Side Reel Chassis
141
107
149
105
120
121
142
*1
116
146
129
PRECISION
P1.4 x 1.8
149
114
143
104
149
147
*2
129
135
111
110
136
129
117
128
W2
101
PRECISION
P1.4 x 1.8
129
118
109
149
132
PRECISION
P1.4 x 1.8
129
149
123
129
SET-SCREW,HEX
2 x 2.5 (FLAT)
130
122
145
148
102
149
144
138
137
129
131
*4
e
115
119
129
106
126
129
103
149
129
126
108
*3
129
140
113
126
127
149134
124
125
149
133
112
*2
*1
*3
1-4
139
*4
DVW-970/V2 (J, E)
No. Part No. SP Description
101 A-8279-469-K s ARM ASSY,THREADING
102 A-8279-472-L s SLIDER ASSY,S
103 A-8279-475-B o SOFT BRAKE ASSY,(S)
104 A-8279-476-J s GEAR ASSY,REEL DRIVE
105 A-8279-477-L s S-TENSION REGURATOR ASSY
106 A-8279-713-C s S IDLER ASSY,LOW
107 X-3605-959-1 o HOLDER ASSY,BEARING
108 X-3605-964-2 o DRAWER ASSY,S LINK
109 X-3605-966-2 o LINK ASSY,S
110 X-3605-967-3 s S-DRAWER ASSY
111 X-3605-969-5 o S CAM ASSY
112 X-3605-970-3 s PLATE ASSY,S
113 X-3605-975-4 o TABLE ASSY,S REEL
114 X-3605-982-3 s BASE ASSY,PULLEY
115 X-3605-983-2 o BASE ASSY,GEAR
116 X-3605-984-3 s BASE ASSY,ONEWAY
117 X-3605-986-2 s BAND(S) ASSY,TEN-REGI
118 X-3605-987-2 o LINK(S) ASSY
119 X-3605-991-2 o PULLEY ASSY,RELAY
120 X-3605-992-5 s GEAR ASSY,T-ONEWAY
121 X-3605-993-5 s GEAR ASSY,S-ONEWAY
122 X-3608-795-2 s ROLLER ASSY,TAPER
123 X-3678-664-4 s GEAR ASSY,S
124 1-543-316-22 s HEAD,SENSING (SMALL TYPE)
125 2-279-715-11 s RIVET,NYLON
S Side Reel Chassis
126 3-303-961-01 s WASHER, POLY
127 3-303-961-11 s WASHER, POLY
128 3-374-615-01 s SCREW +B M2X3 (EP-FE/CU,NI,CR)
129 3-559-408-11 s WASHER,POLYETHYLENE,DIA.1.2
130 3-603-638-01 s FLANGE,UPPER
131 3-620-742-01 s PULLEY(BAND)
132 3-628-984-06 o RAIL,S
133 3-628-996-03 o GUARD,S
134 3-629-209-03 o HOLDER,END SENSOR
135 3-629-216-01 s SPRING,GUIDE,S
136 3-629-217-02 o SPRING,ARM,S
137 3-629-233-01 o BRAKE,SOFT
138 3-629-240-01 s SPRING,BRAKE
139 3-629-255-02 o BASE,BRAKE
140 3-629-256-04 o GEAR,CAM SUB
141 3-633-587-01 s SPRING,EXTENSION
142 3-633-790-01 s SPRING,EXTENSION
143 3-633-791-01 s SPRING,EXTENSION
144 3-669-595-00 s WASHER,2 (PLA)
145 3-680-230-01 s FLANGE, LOWER
146 3-690-806-01 o SPRING PLATE
147 3-701-439-21 s WASHER PLASTIC (3.1X0.5)
148 3-729-011-01 s SPRING, COMPRESSION(COIL) (ST)
149 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
DVW-970/V2 (J, E)
1-5
T Side Reel Chassis
PRECISION
P1.4 x 1.8
202
SET-SCT,HEX.
2 x 2.5 (FLAT)
221
218
217
234234234
223
214
230
233
205
221
215
224
221
212
221
206
228
204
234
216
221
221
SET-SCT,HEX.
2 x 2.5 (FLAT)
231
235
213
Upper
a
b
Lower
a > b
209
221
201
218
221
221
226
229
221
222
218
219
221
W2
220
210
226
232
221
PRECISION
P1.4 x 1.8
203
221
211
234
225
207
227
1-6
208
DVW-970/V2 (J, E)
No. Part No. SP Description
201 A-8279-077-E s IDLER ASSY,T
202 A-8279-471-L s SLIDER ASSY,T
203 A-8279-474-G o T-TENSION REGULETOR ASSY
204 A-8279-480-N s ARM ASSY,PINCH
205 X-3605-965-2 o LINK ASSY,T
206 X-3605-968-7 s PINCH HOLDER ASSY
207 X-3605-971-3 s PLATE ASSY,T
208 X-3605-972-2 s LINK ASSY,F
209 X-3605-973-9 s ARM ASSY, PINCH
210 X-3605-979-3 o LINK ASSY(B),EJECT
211 X-3605-990-1 o GEAR ASSY,CAM
212 X-3605-994-3 s BAND ASSY,TENSION REGULATOR(T)
213 X-3605-999-1 o ARM ASSY,
214 X-3608-795-2 s ROLLER ASSY,TAPER
215 X-3678-665-4 s GEAR ASSY,T
216 X-3678-926-1 s PINCH ROLLER ASSY
217 X-3679-500-7 s TABLE ASSY,T REEL
218 3-303-961-01 s WASHER, POLY
219 3-303-961-11 s WASHER, POLY
220 3-374-615-01 s SCREW +B M2X3 (EP-FE/CU,NI,CR)
221 3-559-408-11 s WASHER,POLYETHYLENE,DIA.1.2
222 3-603-591-01 o GEAR,INTERMITTENT
223 3-603-638-01 s FLANGE,UPPER
224 3-628-985-07 o RAIL,T
225 3-629-203-03 o GUARD,T
T Side Reel Chassis
226 3-629-240-01 s SPRING,BRAKE
227 3-629-316-02 s SPRING,TORSION
228 3-629-810-01 s SPRING,TORSION
229 3-635-856-01 s BRAKE,T SOFT
230 3-680-230-01 s FLANGE, LOWER
231 3-704-794-03 s GUIDE,T3 FIXED
232 3-704-795-02 s PLATE,RELEASE
233 3-729-011-01 s SPRING, COMPRESSION(COIL) (ST)
234 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
235 3-791-026-01 s SPRING,COMPRESSION
DVW-970/V2 (J, E)
1-7
FE/CTL and CUE/TC Heads
303
315
304
331
315
319
330
320
316
333
335
331
301
SET-SCREW,
SLOT 2 x 4
FLAT POINT
330
317
318
333
333
307
333
323
329
328
332
324
334
322
332
330
SET-SCREW,
SLOT 2 x 4
FLAT POINT
310
BLOT,HEXAGON
SOCKET 2 x 4
W2,SMALL
326
305
315
314
333
313
302
308
333
312
306
333
312
321
315
315
327
311
333
309
315
325
1-8
DVW-970/V2 (J, E)
No. Part No. SP Description
301 A-8279-473-B o GEAR BLOCK (B) ASSY
302 A-8279-626-B s PRESS ASSY,ARM(A)
303 X-3605-885-1 s HEAD ASSY,(FE291-21A)
304 X-3605-961-5 s PLATE ASSY,HEAD CTL
305 X-3605-962-1 o BASE ASSY,A/T HEAD
306 X-3605-976-2 o LINK ASSY(A),EJECT
307 X-3605-978-2 o PLATE ASSY,GEAR
308 X-3605-980-2 o LEVER ASSY,PRESS
309 X-3605-981-2 o PLATE ASSY,GUIDE
310 X-3605-985-3 s PLATE ASSY,A/T
311 X-3605-988-4 s ARM ASSY,PRESS
312 1-810-599-11 s SENSOR, DEW CONDENSATION
313 1-960-877-12 s HARNESS, SUB (CUE-MDC)
314 3-534-236-00 s SPRING, COMPRESSION
315 3-559-408-11 s WASHER,POLYETHYLENE,DIA.1.2
316 3-603-615-02 s SPRING,COIL,HEAD
317 3-603-672-01 o SPACER TAPER
318 3-603-678-01 s SPRING,COMPRESSION
319 3-603-691-01 o GEAR,MIDWAY
320 3-628-987-02 s ARM,CTL
321 3-629-200-01 o GEAR (A)
322 3-629-201-01 o GEAR (B)
323 3-629-222-01 o DAMPER,AT
324 3-629-264-03 s PLATE,AT HEAD
325 3-629-268-03 o GEAR,CAM,PRESS
FE/CTL and CUE/TC Heads
326 3-631-500-01 o PLATE,AT LOCK
327 3-637-984-01 s SPRING,EXTENTION
328 3-669-316-00 s SPRING,COMPRESSION (STEEL)
329 3-680-223-01 s SHAFT
330 3-698-829-01 s NUT,NYLON
331 3-729-012-01 s SCREW (M2X5) (STEEL)
332 3-729-012-21 s SCREW (M2X4) (ST)
333 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
334 8-825-779-61 s HEAD, AU PS244-2103L
335 8-825-779-72 s CTL HEAD, PS244-21D
DVW-970/V2 (J, E)
1-9
Belt and Capstan Motor
402
403
417
418
415
415
418
415
418
401
416
407
410
418
409
415
418
415
405
417
406
417
419
412
413
417
408
417
417
404
414
417
1-10
411
DVW-970/V2 (J, E)
No. Part No. SP Description
401 A-8279-512-A o HOLDER ASSY SENSOR(ID)
402 A-8279-513-A o HOLDER ASSY SENSOR(REC)
403 A-8326-155-A o MOUNTED CIRCUIT BOARD, SE-613
404 A-8326-337-A o MOUNTED CIRCUIT BOARD, MDR-14
405 A-8328-110-A s SCV12B/J-RP
406 A-8326-333-A s MOUNTED CIRCUIT BOARD, MDC-13
407 X-3608-100-2 o PULLEY ASSY
408 1-783-287-14 s CABLE, FLEXIBLE FLAT (45 CORE)
409 2-640-315-01 o SCREW(M2X5),SMALL (STEEL)
410 3-559-408-11 s WASHER,POLYETHYLENE,DIA.1.2
411 3-629-223-01 s BELT,TIMMING
412 3-629-224-02 s SPACER,GP2S09
413 3-629-827-01 o PLATE,GROUND
414 3-631-895-01 s SCREW,STEP
415 3-669-465-01 s WASHER(1.5), STOPPER (PA)
416 3-701-436-11 s WASHER (1.6X0.25) (PLASTIC)
417 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
418 3-729-084-41 s BOLT (M2X8), HEXAGON HOLE
419 8-759-245-23 s PHOTO SENSOR TLP-908
Belt and Capstan Motor
DVW-970/V2 (J, E)
1-11
Cassette Compartment
514
501
505
515
E1.2
511
509
*1
506
509
504
509
E1.2
506
508
509
506
509
E1.2
E1.2
E1.2
E1.2
509
E1.2
509
E1.2
509
509
E1.2
509
509
512
*1
510
509
510
1-12
DVW-970/V2 (J, E)
No. Part No. SP Description
501 A-1141-045-A s CASSETTE COMPARTMENT ASSY (RP)
503 3-319-686-01 s SPRING,TENSION (STEEL)
504 3-329-998-01 s SPRING,TENSION (COIL) (ST)
505 3-343-503-01 s SPRING, TENSION (STEEL)
506 3-571-829-00 s SPRING,TENSION
508 3-645-189-11 s SPRING, TENSION
509 3-680-032-01 o ROLLER(A)
510 3-680-081-01 o ROLLER(B)
511 3-680-258-01 o ROLLER SOPPER
512 3-680-995-03 s SPRING,EXTENSION
514 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
515 3-789-431-01 s SPRING,EXTENSION
Cassette Compartment
DVW-970/V2 (J, E)
1-13
Outside Panel and Main Block
641
616
614
613
632
617
637
626
629
629
624
608
*2
620
632
639
613
601
629
625
630,
609
606
605
619
619
*1
638
622
623
618
615
610
PWH2.6 x 4
613
628
623621
628
611
*1
602
604
634
603
627
640
632
632
632
W2.6
607
634
B3 x 10
636
633
639
631
*3
636
635
*3
634
634
*2
1-14
642
612
B3 x 10
DVW-970/V2 (J, E)
No. Part No. SP Description
601 A-1128-132-A s PANEL SUB ASSY, OUTSIDE
602 A-8278-840-B s CASSETTE RETAINER ASSY
603 A-8279-344-A s ARM ASSY,CASSETTE,LOCK
604 A-1128-133-A s LID ASSY,FRONT
605 A-8279-503-C s ASSY,CASSE-CON DAMPER
606 X-3608-131-2 o ARM ASSY,LID
607 X-3679-292-3 o COVER ASSY,REAR
608 3-165-904-01 s WASHER, SCREW STOPPER (PLA)
609 3-203-203-01 s SCREW (2X7), DAMPER (+PSW)
610 3-315-384-31 s WASHER,STOPPER (PLA)
611 3-329-998-01 s SPRING,TENSION (COIL) (ST)
612 3-364-941-01 s SCREW (+B) (2.6X5),NYLOK
613 3-603-680-01 s STAINLESS SCREW +B3X12
614 3-611-304-02 o GUIDE,CASSETTE IN
615 3-611-654-01 o GEAR,MIDWAY
616 3-629-424-01 s DROP PROTECTION(ME)
617 3-872-331-01 s WINDOW(L),CASSETTE
618 3-629-427-01 s CAP,REMOTE
619 3-629-428-01 o RUBBER,DUST PROTECTION(S)
620 3-629-429-01 o RUBBER,DUST PROTECTION(L)
621 3-629-433-02 s RUBBER,DROP PROTECTION(F-LID)
622 3-629-434-01 s RUBBER,DROP PROTECTION(LID)B
623 3-629-435-01 s RUBBER,DROP PROTECTION(LID)A
624 3-631-421-02 o GUIDE,CASSETTE
625 3-631-546-01 o RUBBER,DUST PROTECTION(SS)
Outside Panel and Main Block
626 3-657-657-00 s SCREW (M5)
627 3-661-278-01 s PIN, PARALLEL
628 3-669-596-00 s WASHER,2.3 (PLA)
629 3-672-250-00 s RING(M2.6),O (RBR)
630 3-681-528-11 s DAMPER
631 3-692-134-01 o MIC CLAMP
632 3-694-181-01 s AROCK PRECISION +P2.6 TYPE 1
633 3-709-104-01 s SCREEN, WIND
634 3-742-074-11 s SCREW (3)
635 3-776-341-01 s EYE CUP
636 3-854-132-01 s MIC CLAMP
637 3-868-956-02 s COVER,BNC
638 3-869-210-12 s WINDOW(U),CASETTE
639 3-941-343-01 s TAPE (A)
640 3-949-973-01 s SPRING, TENSION
641 3-965-077-01 s SCREW, SPECIAL (M2)
642 3-872-912-01 s COVER, FILTER
DVW-970/V2 (J, E)
1-15
CCD Block and Front Panel
729
SET-SCREW,
HEX 2 x 3 WP (ST)
716
720
719
718
SET-SCREW,
HEX 2 x 3 WP (ST)
723
707
703
P2.6 x 8
705
728
727
730
722
726
720
717
724
714
706
709
SW3
709
720
SW3
708
713
701
731
725
725
702
712
711
725
731
1-16
721
710
PRECISION
P2 x 4
704
PRECISION
K2 x 4
715
DVW-970/V2 (J, E)
No. Part No. SP Description
701 A-1091-734-A s MOUNTED CIRCUIT BOARD, SE-803
702 A-1132-619-A s CCD BLOCK ASSY (RP) (for DVW-970)
A-1132-620-A s CCD BLOCK ASSY (RP) (for DVW-970P)
703 A-8326-031-B s MOUNTED CIRCUIT BOARD, SW-1031
704 A-8347-338-A s MOUNTED CIRCUIT BOARD, CN-2437
705 A-8347-849-A s MOUNTED CIRCUIT BOARD, CN-2569
706 X-3608-112-2 o SUB ASSY,FRONT SW
707 X-3608-166-6 s SUB ASSY(2M),FRONT FRAME
708 1-467-820-21 o FILTER UNIT, OPTICAL (for DVW-970)
1-467-820-11 o FILTER UNIT, OPTICAL (for DVW-970P)
709 2-623-773-11 s BOLT (M3X8),STAINLESS
710 3-186-442-01 o RING, MOUNT
711 3-312-823-01 s PACKING, KNOB (NBR)
712 3-624-135-01 s KNOB,VR(AUDIO)
713 3-629-476-01 o SHEET,PROTECTION
714 3-629-480-04 s PLATE(FR),SHIELD
715 3-678-629-00 s LEVER,MOUNT
716 3-679-659-03 o CLAMP,CABLE (PP)
717 3-679-668-01 s BUTTON,VTR START
718 3-679-670-03 s KNOB,FILTER(ND)
719 3-679-671-11 s KNOB,FILTER(CC)
720 3-694-181-01 s AROCK PRECISION +P2.6 TYPE 1
721 3-699-048-01 s CAP,MOUNT
722 3-703-357-05 o PIN, PARALLEL (DIA. 1.6X8)
723 3-710-024-01 o PACKING,VF
CCD Block and Front Panel
724 3-719-381-01 s SCREW +P M2X4 (ZNBK)(LOCK )
725 3-729-076-11 s SCREW +B2X4 (STEEL)
726 3-742-066-11 o SPRING, SHUTTER
727 3-742-067-04 o LID, SHUTTER
728 3-854-361-01 s GUARD VOLUME FRONT
729 3-854-362-01 s HOLDER GUARD
730 3-854-363-01 s SLIDER
731 3-854-378-01 s PLATE,FILTER ID
DVW-970/V2 (J, E)
1-17
Inside Panel-1
833
833
822
815
825
833
816
811
805
833
809
827
833
833
832
808
806
PTP
2.6 x 6
801
826
824
831
832
833
817
803
810
808
807
834
813
814
830
806
824
831
804
832
812
807
833
808
834
813
802
828
820
821
833
PTP2 x 3
818
829
819
823
1-18
DVW-970/V2 (J, E)
No. Part No. SP Description
801 A-8286-160-D o FRAME KEY,ASSY
802 A-8326-087-A o MOUNTED CIRCUIT BOARD, BP-33
803 A-8326-095-A o MOUNTED CIRCUIT BOARD, KY-475
804 A-1124-625-A s MOUNTED CIRCUIT BOARD, APR-59A
805 A-1108-611-A s MOUNTED CIRCUIT BOARD, FP-148
806 X-3608-136-2 s KNOB(3 POSI) ASSY,SW
807 X-3678-125-1 s KNOB(2 POSI) ASSY,SW
808 X-3678-126-1 s KNOB(3 POSI) ASSY,SW
809 ! 1-528-229-41 s BATTERY, LITHIUM (CR-2450)
810 1-757-276-12 s CABLE, FLEXIBLE FLAT (10 CORE)
811 1-757-279-12 s CABLE, FLEXIBLE FLAT (45 CORE)
812 1-777-867-12 s CABLE, FLEXIBLE FLAT (50CORE)
813 3-603-759-01 o SUPPORT(R),INSIDE
814 3-611-740-02 s KNOB(2),VR
815 3-620-207-01 s RETAINER ,FR FLEXIBLE CABLE
816 3-620-208-01 s PLATE,FR HARNESS SUPPORT
817 3-629-745-02 o COVER,KEY SW
818 3-629-746-09 s PAD,SIDE
819 3-629-749-04 s SPRING,TURBO GAIN
820 3-629-753-11 o LID,MENU
821 3-629-754-02 s LID BRACKET,MENU
822 3-629-759-04 o PLATE,SHIELD
823 3-629-776-03 o COVER,TURBO GAIN
824 3-629-813-01 o LABEL.KNOB
825 3-631-371-02 o BLIND CUSHION
Inside Panel-1
826 3-633-988-01 s SPRING,COMPRESSION
827 3-680-214-01 o SPACER LCD
828 3-680-219-03 s KNOB,VR
829 3-701-437-11 s WASHER PLASTIC (2.1X4X0.25)
830 3-701-468-01 s SCREW (+- 2X4),LOCK
831 3-717-902-21 o PLATE,ORNAMENTAL
832 3-717-902-31 o PLATE,ORNAMENTAL
833 3-719-381-01 s SCREW +P M2X4 (ZNBK)(LOCK )
834 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
DVW-970/V2 (J, E)
1-19
Inside Panel-2
925
P1.7 x 2.5
925
920
915
909
918
923
926
901
925
912
925
917
922
924
907
913
914
902
911
P1.7 x 2.5
903906
908
910
911
904
916
921
919
905
1-20
DVW-970/V2 (J, E)
No. Part No. SP Description
901 A-1108-579-A s MOUNTED CIRCUIT BOARD, SW-1196
902 A-8326-097-A o MOUNTED CIRCUIT BOARD, ENC-61
903 A-8326-099-A o MOUNTED CIRCUIT BOARD, HP-103
904 A-8326-100-A o MOUNTED CIRCUIT BOARD, HP-104
905 X-3704-653-1 o LID ASSY,MS
906 X-3949-613-1 s CHASSIS ASSY, MS
907 1-503-293-11 s SPEAKER
908 1-673-614-11 s PRINTED WIRING BOARD, FP-84
909 1-763-652-11 s FAN, D.C.
910 1-785-593-31 s CONNECTOR, MEMORY STICK
911 3-620-733-01 s COVER HEADHONE JACK
912 3-629-445-01 o BRACKET,SW
913 3-629-446-04 s SLEEVE(ENC2)
914 3-629-447-03 o SLEEVE(ENC1)
915 3-629-449-02 o RUBBER(MS),DROP PROTECTION
916 3-629-452-05 o KNOB(OPEN),MS
917 3-629-459-03 o PLATE,GROUND
918 3-629-736-03 s BRACKET,FAN
919 3-629-748-03 o KNOB(EJECT),MS
920 3-629-752-03 o BRACKET,MS
921 3-629-760-01 o SPACER MS KNOB
922 3-647-917-02 s PLATE,EARTH
923 3-690-987-02 s SCREW,STEP
924 3-692-111-02 s KNOB,RE
925 3-719-381-01 s SCREW +P M2X4 (ZNBK)(LOCK )
Inside Panel-2
926 3-729-013-41 s SCREW(M1.4X3.5),WASHERHEAD(+P)
DVW-970/V2 (J, E)
1-21
Inside Panel-3
1025
1002
1021
1011
1024
1020
1016
1016
1010
1023
1017
1019
1012
1023
1007
1007
1015
1005
1003
1006
*1
1027
*2
1028
1023
1029
1023
1026
1027
1006
1018
1006
1009
1014
1008
1030
1031
1013
1004
1022
*1
*2
1022
1001
1-22
DVW-970/V2 (J, E)
Loading...
+ 300 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.