Sony DCR-SX83 User Manual
DCR-SX83
Digital Video Camera Recorder
Operating Guide
4-171-513-11(1)
US
Guía de operaciones
2010 Sony Corporation
ES
Owner’s Record
The model and serial numbers are located
on the bottom. Record the serial number
in the space provided below. Refer to these
numbers whenever you call upon your Sony
dealer regarding this product.
Model No. DCRSerial No.
Model No. ACSerial No.
WARNING
To reduce fire or shock hazard, do not
expose the unit to rain or moisture.
Do not expose the batteries to
excessive heat such as sunshine, fire or
the like.
This symbol is intended
to alert the user to the
presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance.
This symbol is intended
to alert the user to the
presence of uninsulated
“dangerous voltage” within
the product’s enclosure
that may be of sufficient
magnitude to constitute
a risk of electric shock to
persons.
US
2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
US
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.
US
3
Representative plug of power supply cord of countries/regions around the world.
A Type
(American
Type)
B Type
(British Type)
BF Type
(British Type)
B3 Type
(British Type)
C Type
(CEE Type)
SE Type
(CEE Type)
(Ocean Type)
The representative supply voltage and plug type are described in this chart.
Depend on an area, Different type of plug and supply voltage are used.
Attention: Power cord meeting demands from each country shall be used.
For only the United States
Use a UL Listed, 1.5-3 m (5-10 ft.), Type SPT-2 or NISPT-2, AWG no. 18 power supply
cord, rated for 125 V 7 A, with a NEMA 1-15P plug rated for 125 V 15 A.”
Europe
Countries/regions Voltage Frequency (Hz) Plug type
Austria 230 50 C
Belgium 230 50 C
Czech 220 50 C
Denmark 230 50 C
Finland 230 50 C
France 230 50 C
Germany 230 50 C
Greece 220 50 C
Hungary 220 50 C
Iceland 230 50 C
Ireland 230 50 C/BF
Italy 220 50 C
Luxemburg 230 50 C
Netherlands 230 50 C
Norway 230 50 C
Poland 220 50 C
Portugal 230 50 C
Romania 220 50 C
Russia 220 50 C
Slovak 220 50 C
Spain 127/230 50 C
Sweden 230 50 C
Switzerland 230 50 C
UK 240 50 BF
Asia
Countries/regions Voltage Frequency (Hz) Plug type
China 220 50 A
Hong Kong 200/220 50 BF
India 230/240 50 C
Indonesia 127/230 50 C
Japan 100 50/60 A
Korea (rep) 220 60 C
Malaysia 240 50 BF
Philippines 220/230 60 A/C
Singapore 230 50 BF
Taiwan 110 60 A
Thailand 220 50 C/BF
US
4
O Type
Countries/regions Voltage Frequency (Hz) Plug type
Vietnam 220 50 A/C
Oceania
Countries/regions Voltage Frequency (Hz) Plug type
Australia 240 50 O
New Zealand 230/240 50 O
North America
Countries/regions Voltage Frequency (Hz) Plug type
Canada 120 60 A
USA 120 60 A
Central America
Countries/regions Voltage Frequency (Hz) Plug type
Bahamas 120/240 60 A
Costa Rica 110 60 A
Cuba 110/220 60 A/C
Dominican (rep) 110 60 A
El Salvador 110 60 A
Guatemala 120 60 A
Honduras 110 60 A
Jamaica 110 50 A
Mexico 120/127 60 A
Nicaragua 120/240 60 A
Panama 110/220 60 A
South America
Countries/regions Voltage Frequency (Hz) Plug type
Argentina 220 50 C/BF/O
Brazil 127/220 60 A/C
Chile 220 50 C
Colombia 120 60 A
Peru 220 60 A/C
Venezuela 120 60 A
Middle East
Countries/regions Voltage Frequency (Hz) Plug type
Iran 220 50 C/BF
Iraq 220 50 C/BF
Israel 230 50 C
Saudi Arabia 127/220 50 A/C/BF
Turkey 220 50 C
UAE 240 50 C/BF
Africa
Countries/regions Voltage Frequency (Hz) Plug type
Algeria 127/220 50 C
Congo (dem) 220 50 C
Egypt 220 50 C
Ethiopia 220 50 C
Kenya 240 50 C/BF
Nigeria 230 50 C/BF
South Africa 220/230 50 C/BF
Tanzania 230 50 C/BF
Tunisia 220 50 C
US
5
Read this first
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
CAUTION
Battery pack
If the battery pack is mishandled, the
battery pack can burst, cause a fire or even
chemical burns. Observe the following
cautions.
Do not disassemble.
Do not crush and do not expose the battery
pack to any shock or force such as hammering,
dropping or stepping on it.
Do not short circuit and do not allow metal
objects to come into contact with the battery
terminals.
Do not expose to high temperature above 60°C
(140 °F) such as in direct sunlight or in a car
parked in the sun.
Do not incinerate or dispose of in fire.
Do not handle damaged or leaking lithium ion
batteries.
Be sure to charge the battery pack using a
genuine Sony battery charger or a device that
can charge the battery pack.
Keep the battery pack out of the reach of small
children.
Keep the battery pack dry.
Replace only with the same or equivalent type
recommended by Sony.
Dispose of used battery packs promptly as
described in the instructions.
Replace the battery with the specified type
only. Otherwise, fire or injury may result.
AC Adaptor
Do not use the AC Adaptor placed in a
narrow space, such as between a wall and
furniture.
socket) immediately if any malfunction
occurs while using your camcorder.
Even if your camcorder is turned off, AC
power source (mains) is still supplied to
it while connected to the wall outlet (wall
socket) via the AC Adaptor.
For customers in the U.S.A. and CANADA
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable.
You can help preserve our
environment by returning
your used rechargeable
batteries to the collection and
recycling location nearest you.
For more information
regarding recycling of
rechargeable batteries, call toll
free 1-800-822- 8837, or visit
http://www.rbrc.org/
Caution: Do not handle
damaged or leaking LithiumIon batteries.
Battery pack
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
This Class B digital apparatus complies
with Canadian ICES-003.
Use the nearby wall outlet (wall socket)
when using the AC Adaptor. Disconnect
the AC Adaptor from the wall outlet (wall
US
6
For the customers in the U.S.A.
UL is an internationally recognized safety
organization.
The UL Mark on the product means it has
been UL Listed.
If you have any questions about this
product, you may call:
Sony Customer Information Center 1-800222-SONY (7669).
The number below is for the FCC related
matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-SX83
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
Note
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Supplied items
The numbers in ( ) are the supplied
quantity.
AC Adaptor (1)
Power cord (Mains lead) (1)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FV30 (1)
CD-ROM “Handycam” Application
Software (1)
“PMB” (software, including “PMB Help”)
“Handycam” Handbook (PDF)
“Operating Guide” (This manual) (1)
See page 19 for the memory card you can use
with this camcorder.
US
7
Using the camcorder
Do not hold the camcorder by the following
parts, and also do not hold the camcorder by
the jack covers.
LCD screen
Battery pack
The camcorder is not dustproofed, dripproofed
or waterproofed. See “Precautions” (p. 55).
Menu items, LCD panel, and lens
A menu item that is grayed out is not available
under the current recording or playback
conditions.
The LCD screen is manufactured using
extremely high-precision technology, so over
99.99% of the pixels are operational for effective
use. However, there may be some tiny black
points and/or bright points (white, red, blue,
or green in color) that appear constantly on the
LCD screen. These points are normal results of
the manufacturing process and do not affect the
recording in any way.
Black points
White, red, blue or green points
Exposing the LCD screen or the lens to direct
sunlight for long periods of time may cause
malfunctions.
Do not aim at the sun. Doing so might cause
your camcorder to malfunction. Take images
of the sun only in low light conditions, such as
at dusk.
About changing the language setting
The on-screen displays in each local language
are used for illustrating the operating
procedures. Change the screen language before
sing your camcorder if necessary (p. 17).
u
Recording
When you use a memory card with your
camcorder for the first time, formatting the
emory card with your camcorder (p. 51) is
m
recommended for stable operation.
All data recorded on the memory card will
be deleted when it is formatted, and cannot
be recovered. Save important data to your
computer, etc., beforehand.
Before starting to record, test the recording
function to make sure that the image and sound
are recorded without any problems.
Compensation for the contents of recordings
cannot be provided, even if recording or
playback is not possible due to a malfunction of
the camcorder, storage media, etc.
TV color systems differ depending on the
country/region. To view your recordings on a
TV, you need an NTSC system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to copyright laws.
Note on playback
Images recorded on your camcorder may not
play correctly on other devices.
Conversely, images recorded on other devices
may not play correctly on this camcorder.
US
8
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external media
periodically. It is recommended that you save
the image data on a disc such as a DVD-R using
your computer. Also, you can save your image
data using a VCR or a DVD/HDD recorder,
c. (p. 41).
et
Notes on battery pack/AC Adaptor
Be sure to remove the battery pack or the AC
Adaptor after turning off the camcorder.
Disconnect the AC Adaptor from the
camcorder, holding both the camcorder and the
DC plug.
Note on the camcorder/battery pack
temperature
When the temperature of the camcorder
or battery pack becomes extremely high or
extremely low, you may not be able to record
or play back on the camcorder, due to the
protection features of the camcorder being
activated in such situations. In this case, an
indicator appears on the LCD screen.
Carl Zeiss lens
Your camcorder is equipped with a Carl Zeiss
lens, which was developed jointly by Carl
Zeiss, in Germany, and Sony Corporation, and
produces superior images. It adopts the MTF
measurement system for video cameras and
offers a quality typical of a Carl Zeiss lens.
MTF= Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
When the camcorder is connected to a
computer or accessories
Do not try to format the recording media of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
terminal and may result in a malfunction of
your camcorder.
If you cannot record/play back images,
perform [MEDIA FORMAT]
If you repeat recording/deleting images for
a long time, fragmentation of data occurs on
the recording media. Images cannot be saved
or recorded. In such a case, save your images
on some type of external media first, and then
perform [MEDIA FORMAT] by touching
(MENU) [Show others] [MEDIA
FORMAT] (under
[MANAGE MEDIA]
category) the desired medium [YES]
[YES]
.
Notes on optional accessories
We recommend using genuine Sony accessories.
Availability of such products is subject to
country/region.
About images, illustrations, and screen
displays of this manual
The example images used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may appear
different from images and screen indicators that
actually appear on your camcorder. And, the
illustrations of your camcorder and its screen
indication are exaggerated or simplified for
understandability.
In this manual, the internal memory of your
camcorder and memory card are called
“recording media.”
Design and specifications of your camcorder
and accessories are subject to change without
notice.
Confirm the model name of your
camcorder
Confirm the model name on the bottom of your
camcorder.
US
9
Notes on use
Do not do any of the following, otherwise, the
recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
Eject the memory card when the access lamp
. 20) is lit or flashing
(p
Remove the battery pack or AC Adaptor from
the camcorder, or subject the camcorder to
shock or vibration when the
(Photo) lamps (p. 16) or the access lamp
. 20) are lit or flashing
(p
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Do not use your camcorder in very loud areas.
(Movie)/
10
US
Operation flow
Getting started (p. 14)
Prepare the power source and recording media.
Recording movies and photos (p. 21)
Recording movies p. 22
Changing the recording mode
Expected recording time (MEDIA INFO)
Shooting photos p. 24
Playing movies and photos
Playback on the camcorder p. 25
Playing images on a TV p
Saving images
Saving movies and photos with a computer p. 32
Saving movies and photos in external media p
Saving images with a DVD writer/recorder p
. 28
. 39
. 41
Deleting movies and photos (p. 30)
If you delete the image data that has been saved on your computer
or a disc, you can record new images on the free media space
again.
US
11
Table of contents
IMPORTANT SAFETY INSTRUCTIONS .. . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . 3
Read this first .
Operation flow .
Getting started
Step 1: Charging the battery pack .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . 14
Step 2: Turning the power on, and setting the date and time .
Step 3: Preparing the recording media
Recording/Playback
Recording . .. . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . . 21
Playback on the camcorder .
Playing images on a TV .
Making good use of your camcorder
Deleting movies and photos . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... 30
Saving movies and photos with a computer
Preparing a computer (Windows) . . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. 32
Starting PMB (Picture Motion Browser) .
Creating a disc with one touch (One Touch Disc Burn) .
Importing movies and photos to a computer .
Creating a disc .
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . . 6
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . . 11
Charging the battery pack abroad .
Changing the language setting .
To check the recording media settings .
Dubbing or copying movies and photos from the internal recording media
to memory card .
When using a Macintosh .
Copying a disc .
Editing movies .
Capturing photos from a movie .
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . .. 20
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... 25
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . . 28
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . . 32
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . . 37
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . 38
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... 38
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . 15
. .. . ... . ... . .. . ... . .. . ... . 16
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . . 17
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . . 18
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. 19
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . 35
. .. . ... . ... . .. . ... . .. . ... . .. . ... . .. 35
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. 36
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . 38
Saving images with an external device
Saving images in external media (DIRECT COPY) . . .. . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. 39
Creating a disc with a DVD writer, recorder .
US
12
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . .. 41
Customizing your camcorder
Using menus .. . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . .. 46
Getting detailed information from the “Handycam” Handbook .
. .. . ... . ... . .. . ... . .. . .. 52
Additional information
Troubleshooting . . . .. . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . .. 53
Precautions .
Specifications .
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . . 55
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . .. 57
Quick reference
Screen indicators . . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . .. 60
Parts and controls .
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. 63
Index .
. .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . ... . ... . .. . ... . .. . ... . .. . . 61
Table of contents
US
13
Getting started
Step 1: Charging the battery pack
CHG (charge) lamp
DC IN jack
Battery pack
DC plug
AC Adaptor
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
Turn off your camcorder by closing the LCD screen.
1
Attach the battery pack by sliding it in the direction of the arrow until it
2
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
3
camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
4
jack of your camcorder.
Power cord
(Mains lead)
To the wall outlet
(wall socket)
14
US
Tips
See page 59 on recording and playing time.
When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery
pack ().
To use a wall outlet (wall socket) as a power source
Make the same connections as “Step 1: Charging the battery pack.” Even if the battery pack is
attached, the battery pack is not discharged.
Charging the battery pack abroad
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.
Notes
Do not use an electronic voltage transformer.
Notes on the battery pack
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure
that the
The CHG (charge) lamp flashes during charging under the following conditions:
In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
(Movie)/ (Photo) lamps (p. 16), the access lamp (p. 20) are turned off.
The battery pack is not attached correctly.
The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from your camcorder and put it in a warm place.
The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
Getting started
US
15
Step 2: Turning the power on, and setting the
date and time
Open the LCD screen of your camcorder.
1
Your camcorder turns on.
To turn on your camcorder when the LCD screen is open, press POWER.
POWER button
MODE lamp
Select the desired geographical area with
2
Touch the button on
the LCD screen.
/ , then touch [NEXT].
To set the date and time again, touch (MENU) [Show others] [CLOCK/ LANG]
Set [DST SET] or [SUMMERTIME], date and time, then touch
3
The clock starts.
US
[GENERAL SET] category) [CLOCK SET]. When an item is not on the screen, touch
(under
/ until the item appears.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
16
.
Notes
The date and time do not appear during recording, but they are automatically recorded on the recording
media, and can be displayed during playback. To display the date and time, touch
[Show others] [PLAYBACK SET] (under
TIME]
You can turn off the operation beeps by touching
SET] (under
If the button you touch does not react correctly, calibrate the touch panel.
.
[GENERAL SET] category) [BEEP] [OFF] .
[PLAYBACK] category) [DATA CODE] [DATE/
(MENU) [Show others] [SOUND/DISP
(MENU)
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned
off.
Tips
You can turn off your camcorder also by pressing POWER.
When [POWER ON BY LCD] is set to [OFF], turn off your camcorder by pressing POWER.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Touch
category) [
(MENU) [Show others] [CLOCK/ LANG] (under [GENERAL SET]
LANGUAGE SET] a desired language .
Getting started
US
17
Step 3: Preparing the recording media
The recording media that can be used differs depending on your camcorder. The following
icons are displayed on the screen of your camcorder.
*
Internal memory Memory card
* In the default setting, both movies and photos are recorded on this recording media. You can perform
recording, playback and editing operations on the selected medium.
Tips
See page 59 for the recordable time of movies.
Selecting the recording media for movies
Touch (MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [MOVIE MEDIA SET].
The [MOVIE MEDIA SET] screen appears.
Touch the desired recording media.
Touch [YES] .
The recording medium is changed.
Selecting the recording media for photos
Touch (MENU) [Show others] [MEDIA SETTINGS] (under
[MANAGE MEDIA] category) [PHOTO MEDIA SET].
The [PHOTO MEDIA SET] screen appears.
Touch the desired recording media.
Touch [YES] .
The recording medium is changed.
US
18
To check the recording media settings
When recording in movie recording mode or photo recording mode, the recording media
icon is displayed in the top right corner of the screen.
Recording media icon
The icon displayed on the LCD screen varies depending on the camcorder you use.
Inserting a memory card
Notes
Set the recording medium to [MEMORY CARD] to record movies and/or photos on memory card.
Types of memory card that can be used with your camcorder
Only “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, SD memory cards and
SDHC memory cards can be used with this camcorder. A MultiMediaCard cannot be used with this
camcorder.
In this manual, “Memory Stick PRO Duo” media and “Memory Stick PRO-HG Duo” media are referred
to as “Memory Stick PRO Duo” media.
Memory cards of up to 32 GB are guaranteed to work with your camcorder.
Types of “Memory Stick” media that can be used with your camcorder
For recording movies, it is recommended that you use “Memory Stick PRO Duo” media of 512 MB or
larger marked
* Marked with Mark2 or not, either can be used.
“Memory Stick PRO Duo” media/“Memory Stick PRO-HG Duo” media
(This size can be used with your camcorder.)
with:
(“Memory Stick PRO Duo” media)*
(“Memory Stick PRO-HG Duo” media)
Getting started
“Memory Stick PRO Duo” media can be used only with “Memory Stick PRO” media compatible
equipment.
Do not attach a label or the like on “Memory Stick PRO Duo” media or “Memory Stick Duo” media
adaptor.
US
19
Open the cover, orient the memory card’s notched corner as shown in the
illustration, and insert into the memory card slot until it clicks.
Close the cover after inserting the memory card.
Access lamp
Note direction of notched corner.
The [Create a new Image Database File.] screen may appear if you insert a new memory
card. In that case, touch [YES]. If you record only photos on the memory card, touch
[NO].
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong
direction, the memory card, memory card slot, or image data may be damaged.
Notes
If [Failed to create a new Image Database File. It may be possible that there is not enough free space.]
is displayed, initialize the memory card by touching
FORMAT] (under
.
[MANAGE MEDIA] category) [MEMORY CARD] [YES] [YES]
(MENU) [Show others] [MEDIA
To eject the memory card
Open the cover and lightly push the memory card in once.
Do not open the cover during recording.
When inserting or ejecting the memory card, be careful so that the memory card does not pop out and
drop.
Dubbing or copying movies and photos from the internal recording media
to memory card
Touch (MENU) [Show others] [MOVIE DUB]/[PHOTO COPY] (under
[EDIT] category), then follow the displays on the screen.
US
20
Recording/Playback
Recording
In the default setting, movies are recorded on the internal memory.
Tips
See page 18 on changing the recording media.
To open the lens cover
Slide the LENS COVER switch to open.
Tips
When you finish recording or when you play back images, close the lens cover.
Fasten the grip belt.
1
Recording/Playback
Open the LCD screen of your camcorder.
2
Your camcorder turns on.
To turn on your camcorder when the LCD screen is already open, press POWER (p. 16).
You can switch recording modes by pressing MODE. Press MODE to light up the desired recording
mode lamp.
MODE button
(Movie): When
recording a movie
(Photo): When
shooting a photo
US
21
22
US
Recording movies
Press START/STOP to start recording.
You can start recording also by touching in the bottom left of the LCD screen.
START/STOP button
[STBY] [REC]
To stop recording, press START/STOP again.
You can stop recording also by touching in the bottom left of LCD screen.
The icons and indicators on the LCD panel will be displayed for about 3 seconds, then disappear after
turning on your camcorder or switching the recording (movie/photo)/playback modes. To display the
icons and indicators again, touch anywhere on the screen except the rec & zoom buttons on the LCD.
Rec & zoom buttons on LCD
about 3sec
after
Notes
If you close the LCD screen while recording movies, the camcorder stops recording.
The maximum continuous recordable time of movies is about 13 hours.
When a movie file exceeds 2 GB, the next movie file is created automatically.
It will take several seconds until you can start recording after you turn on the camcorder. You cannot
operate your camcorder during this time.
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
ccess lamp (p. 20) is lit or flashing
A
The media icon in the upper right of the LCD screen is flashing
Tips
You can record photos during movie recording by pressing PHOTO fully (Dual Rec).
When a face is detected, a white frame appears and the image quality around the face is optimized
automatically ([FACE DETECTION]).
You can specify the priority face by touching it.
In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person
during movie recording.
You can capture photos from recorded movies.
See page 59 on the recordable time of movies.
You can check the recordable time, estimated remaining capacity, etc., by touching
[Show others] [MEDIA INFO] (under
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
[MANAGE MEDIA] category).
(MENU)
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to
[ON], and record images using the outer frame displayed on the screen as a guide.
STEADYSHOT] is set to [ACTIVE] in the default setting.
[
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and
then adjust the angle ().
90 degrees (max.)
Recording/Playback
180 degrees (max.)
90 degrees to
the camcorder
Data code during recording
The recording date, time and condition are recorded automatically on the recording media.
They are not displayed during recording. However, you can check them as [DATA CODE]
during playback. To display them, touch
SET] (under
[PLAYBACK] category) a desired setting .
(MENU) [Show others] [PLAYBACK
US
23
24
US
Shooting photos
In the default setting, photos are recorded on the internal memory.
Tips
See page 18 on changing the recording media.
Press MODE to turn on the (Photo) lamp.
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.
Press PHOTO lightly to adjust the focus, then press it fully.
You can record photos also by touching on the LCD screen.
Flashes Lights up
When disappears, the photo is recorded.
Tips
To change the image size, touch
[PHOTO SETTINGS] category) a desired setting
You cannot record photos while
You can check the recordable number of photos on the LCD screen (p. 60).
(MENU) [Show others] [ IMAGE SIZE] (under
is displayed.
.
Playback on the camcorder
In the default setting, movies and photos that are recorded on the internal memory are played.
Tips
See page 18 on changing the recording media.
Open the LCD screen of your camcorder.
1
Your camcorder turns on.
To turn on your camcorder when the LCD screen is already open, press POWER (p. 16).
Press
2
The VISUAL INDEX screen appears after some seconds.
Touch
3
Touch the
Movies are displayed and sorted by recording date.
(VIEW IMAGES).
You can display the VISUAL INDEX screen also by touching (VIEW IMAGES) on the LCD
screen.
(Movie) () a desired movie () to play back a movie.
(Photo) () a desired photo () to view a photo.
Recording/Playback
Switches operating button display.
To MENU screen
Displays the screen to select the index type ([DATE INDEX]/[
FACE]).
[
/ : Displays movies recorded on the previous/next date.*
/ : Displays the previous/next movie.
FILM ROLL]/
US
25
26
US
Returns to the recording screen.
* is displayed when is touched.
You can scroll the display by touching and dragging or .
appears with the movie or photo that was most recently played or recorded. If you touch the
movie or photo with , you can continue playback from the previous time. ( appears on the
photo recorded on a memory card.)
Playing movies
Your camcorder starts playing the selected movie.
Volume adjustment
Previous
Next
To stop
OPTION
To fast-forward
To fast-reverse
Tips
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
To pause/play
screen.
Touch
As you repeat touching
/ during pause to play back movies slowly.
/ during playback, movies are played as fast as about 5 times
about 10 times about 30 times about 60 times.
You can display the VISUAL INDEX by touching
INDEX] (under
The recording date, time, and shooting conditions are recorded automatically during recording. This
[PLAYBACK] category).
(MENU) [Show others] [VISUAL
information is not displayed during recording, but you can display it during playback by touching
(MENU) [Show others] [PLAYBACK SET] (under
CODE] a desired setting
.
[PLAYBACK] category) [DATA
To adjust the sound volume of movies
While playing back movies, touch adjust with / .
You can also adjust the sound volume by using / in the OPTION MENU.
Viewing photos
Your camcorder displays the selected photo.
Previous
To the VISUAL
INDEX screen
Tips
When viewing photos recorded on a memory card,
To start/stop slide show
Next
OPTION
(playback folder) appears on the screen.
Recording/Playback
US
27
28
US
Playing images on a TV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable
or an A/V connecting cable with S VIDEO . Connect your camcorder to the wall
outlet (wall socket) u
instruction manuals supplied with the devices to be connected.
A/V connecting cable (supplied)
Connecting to another device via the A/V Remote Connector using an A/V connecting cable.
A/V connecting cable with S VIDEO (sold separately)
When connecting to another device via the S VIDEO jack, by using an A/V connecting cable
with an S VIDEO cable (sold separately), higher quality images can be produced than with an
A/V connecting cable. Connect the white and red plugs (left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (sold separately). The
yellow plug connection is not necessary. Connecting only the S VIDEO plug will not output
audio.
sing the supplied AC Adaptor for this operation (p. 15). Refer also to the
IN
S VIDEO
A/V Remote Connector
VIDEO
(Yellow)
AUDIO
(White) (Red)
Set the input selector of the TV to the input your camcorder will be
connected to.
For details, refer to the instruction manuals supplied with the TV.
Connect your camcorder to a TV with the A/V connecting cable (,
supplied) or an A/V connecting cable with S VIDEO (, sold separately).
Connect your camcorder to the input jack of the TV.
Play back movies and photos on your camcorder (p. 25).
(Yellow)
Signal flow
TVs
VCRs
To set the aspect ratio according to the connected TV (16:9/4:3)
Touch (MENU) [Show others] [OUTPUT SETTINGS] (under [GENERAL
SET] category) [TV TYPE] [16:9] or [4:3]
.
When connecting to your TV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
Notes
When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to
[16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with
your TV.
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s
aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a
malfunction.
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the
16:9 (wide) signal, set [TV TYPE] to [4:3].
Recording/Playback
Tips
To check information (counter, etc.) on the screen of the monitor, touch
others] [OUTPUT SETTINGS] (under
[V-OUT/PANEL]
.
[GENERAL SET] category) [DISP OUTPUT]
(MENU) [Show
US
29
Making good use of your camcorder
Deleting movies and
photos
You can free media space by deleting
movies and photos from recording media.
Notes
You cannot restore images once they are
deleted. Save important movies and photos in
advance.
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
the images. It may damage the recording media.
Do not eject memory card while deleting
images from the memory card.
You cannot delete protected movies and photos.
Undo the protection of the movies and photos
to delete them, before you try to delete them.
If the deleted movie is included in the Playlist,
the movie added to the Playlist is deleted also
from the Playlist.
Tips
You can delete an image on the playback screen
from
To delete all images recorded in the recording
media, and recover all the recordable space of
the media, format the media.
Reduced-size images which enable you to view
many images at the same time on an index
screen are called “thumbnails.”
1
2
OPTION MENU.
Touch (MENU) [Show
others] [DELETE] (under
[EDIT] category).
To delete movies, touch
[ DELETE] [ DELETE].
To delete photos, touch [ DELETE]
DELETE].
[
3
Touch and display the mark
on the movies or photos to be
deleted.
Press and hold the image down on the
LCD screen to confirm the image. Touch
to return to the previous screen.
4
Touch [YES]
.
To delete all movies/photos at one time
In step 2, touch [ DELETE]
DELETE ALL] [YES] [YES]
[
.
To delete all photos at one time, touch
DELETE] [ DELETE ALL] [YES]
[
[YES]
.
To delete all the movies/photos
recorded on the same day at one time
Notes
You cannot delete photos on memory card by
recording date.
In step 2, touch [ DELETE]
DELETE by date].
[
To delete all photos on the same day at one
time, touch [
by date].
DELETE] [ DELETE
30
US
Loading...