Phonak Naída Link CROS
User Guide
Your CROS device
This user guide is valid for:
Wireless models
Phonak Naída Link CROS
CE mark applied
2017
This user guide only applies to the CROS device.
Please see the AB Naída CI sound processor user
guide for instructions related to the AB Naída CI
sound processor.
Model
Naída Link CROS
Earpiece
F Dome
F CROS Tip
Battery type
13
3
Contents
Your CROS device has been developed by Phonak – the world
leader in hearing solutions based in Zurich, Switzerland.
This premium product is the result of decades of research
and expertise and is designed to keep you connected to
the beauty of sound! We thank you for making such a
great choice and wish you many years of
listening pleasure.
Please read the User Guide carefully to make sure that
you understand and get the best out of your CROS device.
For more information about features and benets, simply
contact your hearing care professional.
Phonak - life is on
www.phonak.com
Your CROS device
1. Quick guide
2. Parts of the CROS device
Using the CROS device
3. Left & right CROS device markings
4. On/O
5. Batteries
6. Putting on the CROS device
7. Removing the CROS device
8. Push button
Further Information
9. Care and maintenance
10. Service and warranty
11. Compliance information
12. Information and description of symbols
13. Troubleshooting
14. Important safety information
6
8
10
11
12
14
15
16
17
20
22
26
30
32
4 5
1. Quick guide
Left & right markings On/O
Blue marking for left device.
Red marking for right device.
Changing batteries Push button
1 2 3
Remove the
sticker from the
new battery and
wait two minutes.
Open the
battery door.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
OOn
The push button on your device
functions as a mute button to mute
the sound delivered from the CROS
device.
6 7
2. Parts of the CROS device
Phonak Naída Link CROS is a dedicated product for
unilaterally implanted Naída CI recipients with an
unaidable hearing loss on the contralateral ear. The Naída
Link CROS is worn on the unaidable ear in combination
with the AB Naída CI sound processor on the other ear.
Naída Link CROS transfers the microphone input signal to
the AB Naída CI sound processor. The sound processor
receives the signal and makes sounds from the other side
audible. Naída Link CROS has no acoustical output.
Phonak Naída Link CROS device + AB Naída CI sound
processor = Naída Link CROS solution
Phonak Naída Link CROS only works in connection
with a compatible AB Naída CI sound processor.
Possible earpieces for the Naída Link CROS device
Dome CROS Tip
Naída Link CROS
Tube
CROS Tip
Removal handle
Push
button
Battery
door
8 9
3. Left & right CROS device markings 4. On/O
There is a red or blue marking to tell you if it is a left or a
right device.
Blue marking for left device.
Red marking for right device.
The battery door is also the on/o switch.
1
Closed battery door =
CROS device is on
2
Open battery door =
CROS device is o
10 11
5. Batteries
Replacement battery
This CROS device requires zinc-air batteries.
Model
Zinc air
battery
size
Color
marking on
package
IEC
code
ANSI
code
1 2 3
orange
Remove the
sticker from the
new battery and
wait two minutes.
Open the
battery door.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
Naída Link CROS
13
Please ensure you use the correct type of battery in
your CROS device (zinc-air). Please also read chapter
14.2 for further information on product safety.
If it is dicult to close the battery door: Check that
the battery is inserted correctly and the “+” symbol
is facing the “+” label inside the battery
compartment. If the battery is not inserted
correctly, the CROS device will not work and the
battery door can be damaged.
12 13
PR48
7000ZD
Loading...