Firmenanschrift aufbewahren -
4 0 37 37 3 7 88 89 7
Kleinteile! Not suitable for children under 3 years! -
Keep the address of the company -
Contains small parts! Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!
SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
Tel.: +49 (0)7502 - 94115-0 - Fax: +49 (0)7502 - 94115-99
info@sol-expert-group.de - www.sol-expert-group.de
Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare
Veuillez conserver l'adresse -
Adres bewaren -
Parts list
Number Component Value / Description
1 Circuit board (PCB) 63 mm fitted with Qx5252
3 LEDs white
1 LED green
3 Slide switches Toggle switch, 2 pole
1 Resistor 100 ohm
1 Inductor 56 µH
1 Inductor 220 µH
1 Simple battery holder Size “AA”, UM-3X1
1 NiMH battery 600 mAh, 1.2 V
1 Circular solar panel 50 mA @ 2V
3 Separators made from plastic
1 Cable red
1 Cable black
10+
SOL-EXPERT
We recommend:
Supervision of the assembly
and the soldering process by
an adult! (Supervise all soldering
sites at all times!)
group
group
Jam-jar lamp,
solar-powered, assembly kit
No. 78889
What else is required:
Jam-jar or preservative jar, lid diameter at least 85 mm
Metal drill bit 5 mm
Hand counterbore
Glue gun with adhesive cartridges
Soldering iron
Solder
Assembly kit for solar-powered jam-jar lamp
General: This soldering assembly kit should provide an easy introduction to the basics of soldering. It is perfectly suited for
teaching how to solder in schools and workshops. As well as this, the jam-jar assembly kit can be used at summer camps, on
summer courses and for other activities to help teach kids how to solder.
Features of the solar-powered jam-jar lamp assembly kit
If the circuit board is already soldered and installed in the jam-jar, it can be used outside as a solar lamp or a solar powered
garden decoration.
The energy of the sun is captured by the solar panel and stored in the battery. As soon as it gets dark and as long as the battery
has been able to store energy over the course of the day, the 3 LEDs should be able to illuminate automatically. The jar shines
from within and illuminates its surroundings. With the addition of some decorative materials such as a coloured or patterned
serviette, every jam-jar can be decorated uniquely. Whether you paint the glass, attach paper cuttings in a collage or stick on
glitter, sequins or seashells - your creativity should know no bounds!
The jam-jar lamp can be switched between summer and winter settings in order to guarantee the longest possible illumination
period. In summer, the lamp functions for 5 hours at a time.
Safety Instructions
Keep this set of instructions in a safe place so that it can be consulted again in the future if needed! It contains important information!
If the battery is defective, only replace it with a new battery of the same value. (600mAh/1.2V)
This assembly set is solely intended to be powered using batteries.
of 230 V! This could seriously pose a danger to your life and cause death or severe injuries!
During soldering, the soldering iron, solder and the component parts which are being soldered are extremely hot. Please be
especially careful with them!
Always use a soldering pad when soldering! This prevents the component parts and circuit board from sliding around.
In order to keep the soldering iron secure during assembly, we recommend using a soldering iron stand.
NEVER connect the assembly kit to a mains voltage
Instructions for protecting the environment
General: Please bring the circuit board to a certified waste disposal site when it ceases to function. This ensures that the circuit board
is disposed of according to legal guidelines. You can actively ensure that the environment is protected by following the regulations
in place.
Battery regulations: Dearest Customer, you have purchased a product from us which requires batteries. While the battery life is indeed
very long, the battery must eventually be disposed of at some point. Old batteries DO NOT belong in the domestic waste. Consumers
are legally obliged to bring batteries to an appropriate collection point for disposal. Old batteries contain valuable raw materials which
can be recycled. You can also send your used batteries to: SOL-EXPERT group, Mehlisstrasse 19, 88225 Baindt.
Assembly instructions:
Solder solar cell
2
2
1
3
Remove label from the jar
1
Solder circuit board
The smaller IC (Qx5252) has already been soldered!
A
3
Solder on the two inductors and resistor, take
care when soldering the resistor!
56 uH
100 Ohm
220 uH
Contacts pre-solder
Solder cable
B
Resistance
100 Ohm
Spule
Solder the three switches:
C
56 uH
220 uH
Solder on the three white LEDs and the green LED!
Ensure the polarity is correct; the flat
side to the right:
-
+
-
+
+
-
+
-
++
D
Flat side
--
Loading...