Page 1
INSTRUCTIONS
WIRELESS CONNECTION
1.
Move the ON/OFF switch on your Bluetooth Wireless Speaker to the “ON”
position (See Figure 1 on page 3). The Micro Box Bluetooth Wireless Speaker will
announce “Bluetooth Mode ” and the blue light will flash on and off.
2.
Turn on the Bluetooth Wireless capability on your device to make it discoverable to the
Bluetooth Wireless Speaker. See your device’s instructions to add or setup a Bluetooth
Wireless device. The
Bluetooth Wireless option can be found in the “Settings” or “Tools”
o
n most devices.
3.
A menu will come up on your device showing the recognized Bluetooth Wireless device.
Tap on the “BT” option and the Bluetooth Wireless Speaker will acknowledge by saying
“Bluetooth Connected”.
4.
While the speaker is scanning to pair with your device, the blue light on the back of the
speaker will continue to flash. Once your device is discovered, the blue light will remain
solid.
5.
You can now arrow back on your device to your applications menu where your music
is to start playing y our song selections.
AUX CONNECTION
1.
Connect the Bluetooth Wireless Speaker to any device with a headphone jack or line out
using the included 3.5mm audio cable. Bluetooth Wireless Speaker will acknowledge by
saying "Audio Input".
2.
The LED (red) will illuminate indicating a connection.
WARRANTY
Thank you for purchasing the Snap-on® SSX16P1
06KO Bluetooth® Wireless Speaker. Your Bluetooth® Wireless Speaker is
guaranteed against defects in material and workmanship for the period of 1 Year including the date of purchase. This
warranty is limited to the original purchaser of product. Product found to be defective during that period will be repaired or
replaced by 4J International, Inc. at no charge.
This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature.
Warranty does not extend to cosmetics or finish. Before presuming a defect is present in the product, be certain that all
related equipment and wiring is functioning properly. 4J International disclaims any liability for other incurred damages
resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this
warranty. 4J International’s total liability will not exceed the purchase price of the product. A Return Material
Authorization number (RMA) is required before shipping product back to 4J International. Call 262-656-1956 to obtain
an RMA number.
Designed and Engineered in U.S.A. Made in China. Sna p-on is a trademark of Snap-on Incorporated and used under license.
©2015 Snap-on Incorporated. The Bluetooth® word mark and lo gos are registered trade marks owned by Bluetooth SI G,
Inc. and any use of such marks by Snap-on Incorporated and 4J International is under license. Other trademarks and tra de
names are those of their respective owners. Othe r trademarks and trade names are those of their respect ive owners.
4
BLUETOOTH SPEAKER KRA4059 CHEST
You can now arrow back on your device to your applications menu where your music
is to start playing y our song selections.
3.
Page 2
Please read and follow these safety warnings and cautions before using your Bluetooth®
Wireless Speaker to ensure your personal safety and to prevent property damage.
FIRE AND ELECTRIC SHOCK HAZARD
•
Do not expose your Bluetooth Wireless Speaker to liquid, moisture, humidity, or rain.
•
Do not use the Bluetooth Wireless Speaker near a bathtub, sink, sauna, pool, or steam room,
exposure to moisture could result
in electric shock.
•
Do not drop,
disassemble, open,
crush,
bend,
deform,
puncture,
microwave,
incinerate,
paint, or
insert foreign objects into the Bluetooth Wireless Speaker. Such actions could result in electric
shock.
•
Clean the Bluetooth Wireless Speaker only with a dry cloth.
•
Do not expose your Bluetooth Wireless Speaker to extremely high or low temperatures.
•
Do not leave your Bluetooth Wireless Speaker in direct sunlight for extended periods of time.
•
Do not leave your Bluetooth Wireless Speaker near open flames such as cooking burners, candles,
or fireplaces.
• Do not block any ventilation openings.
CAUTION
•
Do not use abrasive cleaners on your Bluetooth Wireless Speaker, as this will cause damage.
•
Do not insert anything into your Bluetooth Wireless Speaker unless otherwise specified in the user
instructions. This could result in
damaging the internal components.
•
Do
not attempt to repair, replace, modify or disassemble your
Bluetooth Wireless Speaker
yourself,
it does not contain any
user-serviceable components.
•
Use only the manufacturer supplied power cord for your Bluetooth Wireless Speaker. Other
power cords may look similar, but using them may result in electric shock or damage the unit.
•
Do not use your Bluetooth Wireless Speaker on any aircraft.
•
Observe all signs and displays that forbid any electrical device use in designated areas.
•
Dispose of your Bluetooth Wireless Speaker in accordance with local regulations.
2
BLUETOOTH® WIRELESS SPEAKER FEATURES
• Voice Command Prompt s
•
2 Large Full Range Speakers, 2 Subwoofers, 2 Tweeters
• Bluetooth 4.0 with aptX
•
AUX Input via 3.5mm Stereo Jack
•
UL Certified DC 24V 2.5A Power Supply
CONTROL
FUNCTIONS (See Figure-1)
1.
ON/OFF - Power button
2.
DC INPUT Port - Connect supplied power cable to
this port and to a standard 120V
power outlet.
3.
Remote Control - (Figure-2) - Functions -Power ON/OFF and Volume control
UP/DOWN.
4.
Line Output - 3.5mm connection for additional speaker source with 3.5mm input.
5. AUX I
NPUT - 3.5mm connection for any audio source with 3.5mm output.
6. Volume Down - Press to decrease volume.
7. Volume Up - Press to increase volume.
8. Mode - Multiple key functions for cycling Bluetooth and AUX modes (default is
Bluetooth mode ).
9. Bluetooth mode LED (Blue) indicator - During the pairing mode the (Blue) LED
will be flashing. When connection has been completed, LED (Blue) will be a
solid light.
10.
AUX LED - (Red) When there is a connection change to AUX IN, the AUX LED will be
solid red.
② ④ ⑤
①
⑥
⑧
Figure-1
3
O
--
LINE OUT AUX IN
- VOLUME + MODE
OFF
ON
DC INPUT 24V 2.5A
BLUETOOTH AUX
LED
LED
⑩
⑨
Figure-2
③
Page 3
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subje ct t o the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any inter ference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party responsible for complian c e could void
the user's authority to operate t he equi pment.
NOTE: This equipment has been tested and fou nd t o c omply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasonable protection against
harmful interference in a residenti al installation.
This equipment generates uses an d can r adiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interferenc e to radio communications.
However, there is no guarantee that int erference will not occur in a particular installation. If this equipme nt does
cause harmful interference t o r adio or t elevision reception, which can be d et er m ined by turning the
equipment off and on, the user is encour aged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving ant enna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which t he r eceiver is connected.
Consult the dealer or an experienced r adio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirem ent . The device can be used in portable
exposure condition without r est r ict ion.
This device and its antenna( s) must not be co-located or operation in conjunct ion w ith any other antenna or
transmitter
Loading...