Smooth Fitness FX25 User Manual

USER’S MANUAL

FX25 MOTORIZED TREADMILL

USER WEIGHT LIMITATION: 265lbs (120 kgs )

SERIAL NUMBER (found on frame):

2 FX25 TREADMILL

For future service or rela te d questions:

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.

Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and

information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.

PRECAUTIONS

• Use the treadmill only as described in this manual.

• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air

openings. To protect the floor or carpet from damage, place a mat under the treadmill.

• When choosing a location for the treadmill be sure that the location and position permit access to a plug.

• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near

water.

• Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

• Keep children under the age of 12 and pets away from the treadmill at all times.

• The treadmill should not be used by persons weighing more than 275lbs (124 kgs. )

• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.

Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.

• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.

• Always straddle the belt and allow it to start moving before stepping onto the belt.

• Always examine your treadmill before using to ensure all parts are in working order.

• Allow the belt to fully stop before dismounting.

• Never insert any object or body parts into any opening.

• Follow the safety information in regards to plugging in your treadmill.

• Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.

• Never leave the treadmill unattended while it is running.

• This equipment is Class B (Home Use Only).

www.evofitness.com 3

POWER REQUIREMENTS

Power Requirements:

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK
OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN
DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG
PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET
INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage
spikes, surges and noise interference can result from weather conditions or from other appliances being turned
on or off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your
treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet
surge protector with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed
voltage rating of 400V or less and an electrical rating 110VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least
resistance for electric current, should the treadmill malfunction. This treadmill is equipped with an electrical cord
that has an equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge
protector, and plug the surge protector into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated
in the drawing below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI
Circuit Breakers may cause this equipment to improperly function.

4 FX25 TREADMILL

PREASSEMBLY

 Open the boxes:

Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the
Supplied Components and Supplied Hardware lists on pages 5-6 for a full count of the parts included. If you
are missing any parts or have any questions contact us directly at 888-800-1167

*Assembly instructions begin on page 10.

 Gather your tools:

Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the
unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick
and hassle-free.

 Clear your work area:

Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the
space is free from anything that may cause injury during assembly. After the unit is fully assembled, make
sure there is a comfortable amount of free area around the unit for unobstructed operation.

 Invite a friend:

Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of
another person when assembling this product.

 User Weight Limitation:

Please note that there is a weight limitation for this product. If you weigh more than 275LB (Approx. 124
Kg) it is not recommended that you use this product. Serious injury may occur if the user’s weight exceeds
the limit shown here. This product is not intended to support users whose weight exceeds this limit.

 Care and maintenance:

The safety level can be maintained only if it is examined for damage and wear.

Replace any defective components immediately and stop all use of the equipment until repaired.

Always take care when mounting the equipment. Straddle the equipment by placing your feet on the
straddle rails. Dismount from the equipment only after all parts have stopped.

Always check the wear and tear components like pulley, belts, etc.…To prevent injury.

There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill
immediately by actuating the emergency stop for emergency dismount.

www.evofitness.com 5

A

This list identifies the major components you will use to assemble this product. Component A, B, and C are already partially
assembled

Supplied Components

No. Description Qty.

A Main Frame Assembly 1

B Front handlebar 1

C Side handlebar 2

108 Water Bottle Holder 2

207 Handle Bar Cover – LL 1

208 Handle Bar Cover – LR 1

209 Handle Bar Cover – RL 1

210 Handle Bar Cover – RR 1

302 Upright Base Cover – LL 1

303 Upright Base Cover – LR 1

304 Upright Base Cover – RL 1

305 Upright Base Cover – RR 1

302

207

B

303

208

C

209

304

108

210

305

6 FX25 TREADMILL

Supplied Hardware

This list identifies the hardware you will use to assemble the product. To help distinguish between the
various types of screws and bolts, use the scale below to measure them and compare them to the sizes listed.

No. Description Qty.

802

M4×15 Screw

803

M3×10 Screw

29

2

805 M8×45 Bolt 8

809 M8×50 Bolt 4

810 M8×18 Bolt 4

811 M8×52 Bolt 2

812

A

φ8 Washer

Screw driver

18

1

B Allen key 1

C Allen Wrench 1

D Safety Key 2

E Power Cord 1

805

A

812

D

809

B

802

810

803

811

C

E

MILLIMETERS

www.evofitness.com 7

Complete Parts List

Description Qty. Order No.

100

Complete Computer Console Components

101 Overlay 1 FX25-101
102 Computer PC Board 1 FX25-102
103 Console Plate 1 FX25-103
104 Console Housing - Upper 1 FX25-104
105 Console Housing - Bottom 1 FX25-105
106 Safety Key Base 1 FX25-106
107 Safety Key 1 FX25-107
108 Water Bottle Holder 2 FX25-108
109 Motion control Wire - Upper 2 FX25-109
110 Plastic Fixing Insert 6 FX25-110
111 hand Pulse Wire - Upper 2 FX25-111

200

Complete Handle Bar Components

201 Front Handle Bar Tube 1 FX25-201
202 Handle Bar 2 FX25-202
203 Handle Bar Upright Foam Grip 2 FX25-203
204 Handle Bar Upright Foam Grip 2 FX25-204
205 Handle Bar Upright Foam Grip 1 FX25-205
206 Hand Pulse Sensor 2 FX25-206
207 Handle Bar Cover - LL 1 FX25-207
208 Handle Bar Cover - LR 1 FX25-208
209 Handle Bar Cover - RL 1 FX25-209
210 Handle Bar Cover - RR 1 FX25-210
211 Console Connect Piece - L 1 FX25-211
212 Console Connect Piece - R 1 FX25-212
213 Console Connect Tube 2 FX25-213
214 Motion Control Sensor Wire 2 FX25-214
215 Motion Control Sensor Base 2 FX25-215
216 Handle Bar End Cap 2 FX25-216
217 Hand Pulse Wire - Lower 2 FX25-217

300

Complete Upright Comp o nen t s

301 Upright 2 FX25-301
302 Upright Base Cover - LL 1 FX25-302
303 Upright Base Cover - LR 1 FX25-303
304 Upright Base Cover - RL 1 FX25-304
305 Upright Base Cover - RR 1 FX25-305
306 Adjustable Cylinder Cover - Upper 2 FX25-306
307 Motion Control Sensor Wire - Middle 2
308 2 pin safety key wire 2200 mm 1
309 7 pin computer wire –upper 2980mm 1

FX25-307

FX25308

FX25309

8 FX25 TREADMILL

COMPLETE PARTS LIST cont.

Description Qty. Order No.

400

Complete Base Frame Components

401 Base Frame 1 FX25-401
402 Rubber Cushion 2 FX25-402
403 Transportation Wheel 1 FX25-403
404 Power Switch Plate Base 1 FX25-404
405 Power Switch Plate Cover 1 FX25-405
406 Power Switch Plate 1 FX25-406
407 Power Breaker 1 FX25-407
408 Power Switch 1 FX25-408
409 Front Caster 2 FX25-409
410 Cushion 4 FX25-410
411 Foot Locker 1 FX25-411
412 Transportation Wheel Bracket 1 FX25-412
413 Spring 1 FX25-413
414 spring of the fold up lock assembly 1
415 fold up locker 1

500

501 Motor Hood Top 1 FX25-501

Complete Motor Components

FX25-414
FX25-415

502 Driving Motor 1 FX25-502
503 Motor Holder 1 FX25-503
504 Driving Belt 1 FX25-504
505 Control Board 1 FX25-505
506 Elevation Support Tube 1 FX25-506
507 Elevation Support Tube End Cap 4 FX25-507
508 Elevation Motor 1 FX25-508
509 Elevation Gear Sleeve 1 FX25-509
510 Fold Up Support 1 FX25-510
511 Shock 1 FX25-511
512 Wheel 1 FX25-512
513 Plastic Clamp – Top 2 FX25-513
514 Plastic Clamp – Bottom 2 FX25-514
515 Elevation Support 2 FX25-515
516 Motor Hood – Left 1 FX25-516
517 Motor Hood – Right 1 FX25-517
518 Motor Bottom Cover 1 FX25-518

600.

Complete Running Deck Components

601 Running Belt 1 FX25-601
602 Side Rail 2 FX25-602
603 Running Deck 1 FX25-603
604 Side Rail End Cap – Left 1 FX25-604
605 Side Rail End Cap – Right 1 FX25-605
606 Cushion Pad 8 FX25-606
607 MAIN FRAME CROSS BAR 1 FX25-607

www.evofitness.com 9

COMPLETE PARTS LIST cont.

No. Description Qty. Order No.

700

Complete Deck Frame Components

701 Deck Frame 1
702 Front Roller Shaft 1
703 Front Roller Tube 1
704 Rear Roller Shaft 1
705 Rear Roller Tube 1
706 Running Deck Support Tube 2
707 Deck rubber Cushion 6

800

Complete Hardware PACK

FX25-701

FX25-702

FX25-703

FX25-704

FX25-705

FX25-706

FX25-707

801 M3.5×16 Screw 8 FX25-801
802 M4×15 Screw 53 FX25-802
803 M3×10 Screw 4 FX25-803
804 φ4 Washer 4 FX25-804
805 M8×45 Bolt 8 FX25-805
806 M4×8 Screw 4 FX25-806
807 M5×30 Screw 4 FX25-807
808 M3×14 Screw 4 FX25-808

809 M8×50 Bolt

4

FX25-809

810 M8×18 Bolt 4 FX25-810
811 M8×52 Bolt 4 FX25-811
812 φ8 Washer 26 FX25-812
813 M4×25 Screw 2 FX25-813
814 M8×49 Bolt 1 FX25-814
815 φ5 Washer 3 FX25-815
816 M5×10 Screw 3 FX25-816
817 M4×14 Screw 3 FX25-817
818 M10 Nylon Nut 7 FX25-818
819 M10×67 Bolt 2 FX25-819
820 φ14×50 Bolt 2 FX25-820
821 φ33×8×10 Screw 2 FX25-821
822 Transportation Wheel Bolt 3 FX25-822
823 φ4×45 Screw 2 FX25-823
824 M10×116 Screw 1 FX25-824
825 M8 Nylon Nut 3 FX25-825
826 M8×12 Bolt 2 FX25-826
827 φ8 Washer 2 FX25-827
828 φ10 Washer 3 FX25-828

829 φ14 Clip 2 FX25-829

10 FX25 TREADMILL

COMPLETE PARTS LIST cont.

No. Description Qty. Order No.

830 M8×48 Screw 1 FX25-830

831 M8×85 Screw 1 FX25-831

832 φ26×φ8.5×3 Washer 2 FX25-832

833 φ25 Rubber Cushion 1 FX25-833

834 M8×30 Bolt 4 FX25-834

835 M5×14 Screw 4 FX25-835

836 M4×19 Screw 16 FX25-836

837 M3×10Screw 2 FX25-837

838 M8×23 Screw 6 FX25-838

839 M6×45 Bolt 3 FX25-839

840 φ6 Washer 3 FX25-840

841 M10×33 Bolt 1 FX25-841

842 M10×56 Bolt 2 FX25-842

843 M8×36.5 Bolt 1 FX25-843

844 M10×43.5 Bolt 1 FX25-844

845 M10×26 Bolt 2 FX25-845

846 M8×30 Screw 2 FX25-846

847 3MM RUBBER CUSHION 2 FX25-847

848 M 8 x 20 mm Bolt 1 FX25-848

MOST OF THE PARTS SHOWN HERE HAVE ALREADY BEEN PRE-ASSEMBLED.

PARTS DIAGR AM

101

www.evofitness.com 11

107

106

109

104

103

803

110

801

108

801

102

109

111

802

105

12 FX25 TREADMILL

MOST OF THE PARTS SHOWN HERE HAVE ALREADY BEEN PRE-ASSEMBLED.

PARTS DIAGR AM

214

215

216

802

204

207

807

809

213

211

812

806

802

812

805

202

804

206

208
802

803

216

217

808

205

204

214

215

203

201

808

217

809

206

802

803

805

209

812

812

203

804

806

212

807

210

802

802

213

202

805

812

812

805