Smooth Fitness 9.45ST User Manual
USER’S MANUAL
9.45ST MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 400lbs(182kgs).
SERIAL NUMBER (found on frame):
2 9.45ST TREADMILL
For future service or rela te d questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.
Name: _____________________ __ _______ Phone Number: ___________________ Receipt: ____________ __________
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
PRECAUTIONS
• Use the treadmill only as described in this manual.
• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that block s a ir
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
• When choosing a location for the treadmill be sure that the location and position permit access to a plug.
• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
• Do not operate the treadmill where aerosol product s are used or where oxyge n i s being adm in i ste red.
• Keep children under the age of 12 and pets away from the treadmill at all times.
• The treadmill should not be used by persons weighing more than 400LBS (182 Kgs).
• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in th e treadmill. Athletic sup port clothes are recommended fo r both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing on ly stockings, or in
sandals.
• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
• Always straddle the belt and allow it to start moving before stepping onto the belt.
• Always examine your treadmill before using to ensure all parts are in working order.
• Allow the belt to fully stop before dismounting.
• Never insert any ob ject or body parts into any opening.
• Follow the safety information in regards to plugging in your treadmill.
• Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Fai lure to follow these
instructions will vo id the treadmill warranty.
• Never leave the treadmill unattended while it is running.
• Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
• Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from
children.
www.smoothfitness.com
3
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltag e spikes, surges and
noise interference can result from weather conditions or from other app lia nc es bein g tur ned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be gro unded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the tre admill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that loo ks like the plug illustrated in the drawing
below.
GFCI outlets and GFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI Circuit Breakers
may cause this equipment to function improperly.
POWER REQUIREMENTS
4 9.45ST TREADMILL
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and compare them to the Supplied
Components and Supplied Hardware lists on pages 5-6 for a full count of the parts included. If you are missing any
parts or have any questions contact us directly at 888-800-1167
*Assembly instructions are on pages 18-26.
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit
properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 400LBS (Approx. 182 Kgs). It is
not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.
Dismount from the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; you can stop the treadmill immediately
by actuating the emergency stop for emergency dismount.
BEFORE YOU BEGIN
www.smoothfitness.com
SUPPLIED COMPONENTS
This list identifies the major components you will use to assemble this product.
No. Description Qty.
A
Computer
1
B Front Handlebar Assembly 1
C Handlebar 2
D Upright Assembly Left 1
A
5
B
E Upright Assembly Right 1
F Main Frame Assembly 1
G Chest Belt 1
F Power Cord 1
I Running belt Lubrication 1
310 Adjustable Cylinder 2
303 Upright Cover - LL 1
304 Upright Cover - LR 1
305 Upright Cover - RL 1
306 Upright Cover - RR 1
311 Upright Plastic Shroud - LL 1
312 Upright Plastic Shroud - LR 1
313 Upright Plastic Shroud - RL 1
314 Upright Plastic Shroud - RR 1
Adjustable Cylinder Cover -
315
Upper
2
107 Safety Key 2
116 Water Bottle 1
310
311
C
G
303
312
D
E
H
313
F
I
305304
314
306
315
107
116
6 9.45ST TREADMILL
SUPPLIED HARDWARE
This list identifies the hardware you will use to assemble the product. To help distinguish between
the various types of screws and bolts, use the scale below to measure them and compare them to
the sizes listed.
No. Description Qty.
804
M8 × 15mm Bolt
805 M8 × 50mm Bolt 12
806 # 8 × 20mm Screw 18
4 × 15mm Thread Cutting
807
Screw
826 M8 Nylon Nut 2
843 M8 × 15 mm Allen Head Bolt 4
2
19
826
804
805
843
806
845
807
846
845 13 × 42mm Shaf t 2
846 #8 × 23mm Washer 2
A 5mm Allen Key 1
B 8mm Allen Key 1
C Screwdriver 1
D 5mm Allen Wrench 1
E Spanner 1
F 6mm Allen Wrench
1
B
CEA
D
F
MILLIMETERS
www.smoothfitness.com
7
COMPLETE PARTS LIST
Item No. Description Qty. Part No.
9.45ST-100
9.45ST-200
9.45ST-300
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
201
202
203
204
205
206
207
208
301
303
304
305
306
307
308
309
Complete Computer Console
Overlay
Computer Insert
Console PC Board
Console Ho using – Upper
Console Housing – Bottom
Safety Key Base
Safety Key
Safety Key Wire – Upper
Computer Wire – Upper
Computer Ground Wire
Hand Pulse Wire – Upper
E – Prom
Motion Control Board
Motion Control Board Wire
Motion Control Sensor Wire
Water Bottle Holder
Complete Handle Bar Components
Handle Bar Upright
Handle Bar Upright Foam Grip
Front Handle Bar
Front Handle Bar Foam Grip-Short
Front Handle Bar Foam Grip-Long
Hand Pulse Set
Motion Control
Motion Control Base
Complete Upright Components
Upright
Upright Cover-LL
Upright Cover-LR
Upright Cover-RL
Upright Cover-RR
Safety Key Wire – Middle
Computer Wire – Upper
Motion Cont rol Sensor Wire - Middle
1 9.45ST-101
1 9.45ST-102
1 9.45ST-103
1 9.45ST-104
1 9.45ST-105
1 9.45ST-106
1 9.45ST-107
1 9.45ST-108
1 9.45ST-109
1 9.45ST-110
2 9.45ST-111
1 9.45ST-112
1 9.45ST-113
1 9.45ST-114
2 9.45ST-115
2 9.45ST-116
2 9.45ST-201
2 9.45ST-202
1 9.45ST-203
1 9.45ST-204
2 9.45ST-205
2 9.45ST-206
2 9.45ST-207
2 9.45ST-208
2 9.45ST-301
1 9.45ST-303
1 9.45ST-304
1 9.45ST-305
1 9.45ST-306
1 9.45ST-307
1 9.45ST-308
2 9.45ST-309
8 9.45ST TREADMILL
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
310
311
312
313
314
315
318
9.45ST-400
401
402
403
404
405
406
407
411
412
413
414
415
416
417
426
9.45ST-500
501
502
503
504
505
506
507
508
Adjustable Cylinder
Upright Plastic Shroud – LL
Upright Plastic Shroud – LR
Upright Plastic Shroud – RL
Upright Plastic Shroud – RR
Adjustable Cylinder Cover - Upper
Fixing Inserts
Complete Base Frame Components
Base Frame
Safety Key Wire – Lower
Computer Wire –Lower
Power Switch Plate Cover
Power Switch Plate
Power Breaker
Power Switch
Bushing
Fix Bolt Sets
Front Caster
Rubber Cushion
Level Adjuster
Base Frame End Cap
Cushion
Shock
Complete Motor Components
Motor Hood
Elevation Motor
Elevation Gear Sleeve
Driving Motor
Motor Holder
Driving Belt
Motor Control Board
Elevation Control Board
2 9.45ST-310
1 9.45ST-311
1 9.45ST-312
1 9.45ST-313
1 9.45ST-314
2 9.45ST-315
2 9.45ST-316
1 9.45ST-401
1 9.45ST-402
1 9.45ST-403
1 9.45ST-404
1 9.45ST-405
1 9.45ST-406
1 9.45ST-407
4 9.45ST-411
2 9.45ST-412
2 9.45ST-413
2 9.45ST-414
2 9.45ST-415
2 9.45ST-416
2 9.45ST-417
1 9.45ST-426
1 9.45ST-501
1 9.45ST-502
1 9.45ST-503
1 9.45ST-504
1 9.45ST-505
1 9.45ST-506
1 9.45ST-507
1 9.45ST-508
www.smoothfitness.com
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
9
09
510
511
512
513
514
515
516
517
518
519
9.45ST-600
601
602
603
604
605
9.45ST-700
701
702
703
704 Roller Bearing 6202
705 Rear Roller Shaft
706 Rear Roller Tube
707 Running Deck Support Tube
708 Deck Fra me – Rear
709 Steady Frame
413 Rear Caster
9.45ST-800
801
802 M4 × 6mm Screws
803 M8 × 12mm Screws
Elevation Support Tube
Elevation Support Tube Cover - LEFT
Motor Bottom Cover
Deck Frame Side Cover - LEFT
Plastic Clamp - TOP
Plastic Clamp - BOTTOM
Elevation Su pp o rt
Deck Rubber Cushion
Rear Vent Cover
Elevation Support Tube Cover - RIGHT
Deck Frame Side Cover – RIGHT
Complete Running Deck Components
Running Belt
Side Rail
Running Deck
Side Rail End Cap - LEFT
Side Rail End Cap - RIGHT
Complete Deck Frame Components
Deck Frame
Front Roller Shaft
Front Roller Tube
Complete Hardware Pack
＃6 × 12mm Screws
1 9.45ST-509
1 9.45ST-510
1 9.45ST-511
1 9.45ST-512
2 9.45ST-513
2 9.45ST-514
2 9.45ST-515
2 9.45ST-516
1 9.45ST-517
1 9.45ST-518
1 9.45ST-519
1 9.45ST-601
2 9.45ST-602
1 9.45ST-603
1 9.45ST-604
1 9.45ST-605
1 9.45ST-701
1 9.45ST-702
1 9.45ST-703
4 9.45ST-704
1 9.45ST-705
1 9.45ST-706
1 9.45ST-707
1 9.45ST-708
1 9.45ST-709
2 9.45ST-413
10 9.45ST-801
12 9.45ST-802
8 9.45ST-803
10 9.45ST TREADMILL
Item No. Description Qty. Part No.
COMPLETE PARTS LIST
804 M8 × 15mm Bolt
805 M8 × 50mm Bolt
806 # 8 × 20mm Screw
807 4 × 15mm Thread Cutting Screw
808 M5 × 10mm Screws
809 M8 × 16 Screws
813 Washer
814 Nylon Nut
816 M14 × 90 Screws
817 Bearing
818 M10 × 35mm Screws
819 M8 × 10mm Screws
820 M8 × 50mm Screws
821 M10 × 63mm Bolts
822 Fixed Block
823 M8 × 120mm Bolts
824 Plate Washer
825 Spring
826 M8 Nylon Nut
827
828
829
830
832
833
834
838
839
840
841
842
843
845
846
M8 × 20mm Screws
Spring Washer
Washer
M10 × 136mm Screws
M8 × 25mm Screws
Hexagon Nut
M6 × 70mm Bolts
M10 × 43mm Bolts
Cushion Pad
M10 × 40mm Screws
M6 × 10mm Screws
M10 × 30mm Al len Head Bolt
M8 × 15mm Allen Head Bolt
13 × 42mm Shaft
#8 × 23mm Washer
3 9.45ST-804
12 9.45ST-805
20 9.45ST-806
19 9.45ST-807
2 9.45ST-808
20 9.45ST-809
4 9.45ST-813
6 9.45ST-814
3 9.45ST-816
4 9.45ST-817
10 9.45ST-818
7 9.45ST-819
2 9.45ST-820
1 9.45ST-821
8 9.45ST-822
1 9.45ST-823
2 9.45ST-824
1 9.45ST-825
2 9.45ST-826
6 9.45ST-827
12 9.45ST-828
2 9.45ST-829
1 9.45ST-830
8 9.45ST-832
10 9.45ST-833
3 9.45ST-834
2 9.45ST-838
10 9.45ST-839
1 9.45ST-840
2 9.45ST-841
2 9.45ST-842
4 9.45ST-843
2 9.45ST-845
2 9.45ST-846
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED
PARTS DIAGR AM
www.smoothfitness.com
11
12 9.45ST TREADMILL
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
PARTS DIAGR AM
Loading...