Smooth Fitness 9.17HRO User Manual
USER’S MANUAL
9.17HRO MOTORIZED TREADMILL
MODEL NUMBER: 9.17HRO
USER WEIGHT LIMITATION: 350lbs. (160kgs.)
SERIAL NUMBER (found on frame):
SMOOTH 9.17HRO MOTORIZED TREADMILL
2
PRECAUTIONS
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important
precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all
users of this treadmill are adequately informed of all warnings and precautions.
• Use the treadmill only as described in this manual.
• Place on a level surface, with 2 meters (6 feet) of clearance behind it. Do not place the treadmill on any
surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the
treadmill.
• When choosing a location for the treadmill make sure that the location and position permit access to a plug.
• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered
patio, or near water.
• Do not operate the treadmill where aerosol products are used or where oxygen is being ad ministered.
• Keep children under the age of 12 and pets away from the treadmill at all times.
• The treadmill should not be used by persons weighing more than 350lbs. (160kgs.)
• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic supp ort
clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in sandals.
• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance sh ould
be on the same circuit.
• Always straddle the belt and allow it to start moving before stepping onto the belt.
• Always examine your treadmill before using to ensure all parts are in working order.
• Allow the belt to fully stop before dismounting.
• Never insert any object or body parts into any opening.
• Follow the safety information in regards to plugging in your treadmill.
• Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill.
Do not operate the treadmill with a damaged or frayed power cord.
• Always unplug the treadmill before cleaning and/or servicing. Service to your treadm ill should only be
performed by an authorized service representative, unless authorized and/or instructed by the
manufacturer. Failure to follow these instructions will void the treadmill warranty.
• Never leave the treadmill unattended while it is running.
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
3
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS
TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH
THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED
ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage
spikes, surges and noise interference can result from weather conditions or from other appliances being turned on or
off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge
protector with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppresse d voltage
rating of 400V or less and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance
for electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an
equipment-grounding conductor and a grounding plug. Al ways plug the po wer cord i nto a surge protector, and plug
the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug il lustrated in the
drawing below.
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
4
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipme nt. Make sure to inventory all of the parts that are
included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this
product to be assembled properly. If you are missing any parts or have any assembly questions call the
manufacturer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require
to assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly
quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350lbs. (160kgs.) it is not
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit
shown here. This product is not intended to support users whose weight exceeds this limit.
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
5
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided
to help you identify those items that may be unfamiliar to you.
NO. DESCRIPTION QTY.
Console Support Fixing
9
Plate 2
M6 x 15mm Console
Fixing Screw
11
16 #8 x 25mm Screw 8
17 Handlebar Fixing Plate 2
M8 x 25mm Allen Head
18
Bolt 6
M8 x 15mm Allen Head
19
Bolt 4
A Wrench 1
B Screw Driver 1
C Allen Wrench 1
2
Visit us at: www.smoothfitness.com
MILIMETERS
SMOOTH 9.17HRO MOTORIZED TREADMILL
6
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
1 Computer 1 9.17HRO-01 28 Upright Cross Brace Bolt 2 9.17HRO-28
Console HousingUpper
2
1 9.17HRO-02 29 Metal Cap 2 9.17HRO-29
Console Housing-
3
Bottom 1 9.17HRO-03 30 Upright-Left 1 9.17HRO-30
4 Rubber Insert 4 9.17HRO-04 31
Rubber Cap for
Audio Input
5
2 9.17HRO-05 32 Upright Cross Brace 1 9.17HRO-32
6 Safety Key 1 9.17HRO-06 33
7 Console Support Tube 1 9.17HRO-07 34 Handlebar-Right 1 9.17HRO-34
#8 x 10mm Console
Housing Screw
8
11 9.17HRO-08 35 Front Handlebar 1 9.17HRO-35
Console Support Tube
9
Fixing Plate 2 9.17HRO-09 36 Upright-Right 1 9.17HRO-36
#8 x 19mm
Computer Screw
10
5 9.17HRO-10 37 #8 x 15mm Drill Screw 54 9.17HRO-37
M6 x 15mm
Console Fixing Screw
11
2 9.17HRO-11 38
Handlebar Cover-
12
Left #1 1 9.17HRO-12 39 Power Cord 1 9.17HRO-39
Handlebar Cover-
Left #2
13
1 9.17HRO-13 40
Handlebar CoverRight #2
14
1 9.17HRO-14 42 Power Plate 1 9.17HRO-42
Handlebar Cover-Right
15
#1 1 9.17HRO-15 43 Pivot Bracket Screw 4 9.17HRO-43
NO. DESCRIPTION QTY. ORDER NO.
Console Tray
Support Tube
1 9.17HRO-31
M8 x 25mm Console Tray
Support Tube Bolt 1 9.17HRO-33
Elevation Motor
Cover Board
1 9.17HRO-38
M6 x 15mm
Bolt for Power Plate
2 9.17HRO-40
16 #8 x 25mm Screw 8 9.17HRO-16 44 Pivot Bracket 2 9.17HRO-44
17 Handlebar Fixing Plate 2 9.17HRO-17 45 Transport W heel Shaft 2 9.17HRO-45
M8 x 25mm
18
Allen Head Bolt 6 9.17HRO-18 46 M14 x 90mm Bolt 2 9.17HRO-46
M8 x 15mm
Allen Head Screw
19
4 9.17HRO-19 47 Wire Clip 1 9.17HRO-47
20 #8 x 10mm Screw 3 9.17HRO-20 48 Base Frame End Cap 4 9.17HRO-48
Console Tray
21
Fixing Plate 1 9.17HRO-21 49 Elevation Motor 1 9.17HRO-49
22 Console Tray 1 9.17HRO-22 50 Cir-Clip 2 9.17HRO-50
23 Console Tray Cover 1 9.17HRO-23 51 Transport Wheel 2 9.17HRO-51
24 Handlebar-Left 1 9.17HRO-24 52 5/16” x 10mm Screw 4 9.17HRO-52
16 x 10mm
25 Handlebar Grip 2 9.17HRO-25 53
Spring Washer
1 9.17HRO-53
26 EKG Pulse Sensor 2 9.17HRO-26 54 M10 x 35mm Bolt 1 9.17HRO-54
27 Handlebar End Cap 2 9.17HRO-27 55 Base Frame 1 9.17HRO-55
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
7
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
56 Diving Tube 1 9.17HRO-56 84 Running Belt 1 9.17HRO-84
57 Micro Switch 3 9.17HRO-57 85 Rear Roller Shaft 1 9.17HRO-85
58 Level Adjuster 4 9.17HRO-58 86 Rear Roller 1 9.17HRO-86
Fold Up Position
59
Limiting Rod
1 9.17HRO-59 87 Front Shroud 1 9.17HRO-87
Fold Up Slipping
60
Rod Sleeve 2 9.17HRO-60 88
61 Position Limiter 2 9.17HRO-61 89 Round Cap 2 9.17HRO-89
62 Fold Up Slipping Rod 2 9.17HRO-62 90
63 Wheel Support 1 9.17HRO-63 91 Cir-Clip 2 9.17HRO-91
64 M8 x 40mm Bolt 2 9.17HRO-64 92 12 x 34.5mm Shaft 2 9.17HRO-92
NO. DESCRIPTION QTY. ORDER NO.
M5 x 20mm
Allen Head Screw 2 9.17HRO-88
Elevation Support
Frame-#1
1
9.17HRO-90
65 PU Wheel 4 9.17HRO-65 93 M14 x 53mm Bolt 2 9.17HROI-93
66 Motor Bottom Tray 1 9.17HRO-66 94 Copper Bushing-#1 4 9.17HRO-94
Elevation Support
67 Motor Hood 1 9.17HRO-67 95
Frame-#2 2 9.17HRO-95
M4 x 25mm
68
Motor Hood Screw 2 9.17HRO-68 96 M14 x 62mm Bolt 2 9.17HRO-96
69 13 x 6.5mm Washer 13 9.17HRO-69 97 Plastic Cap 2 9.17HRO-97
70 M5 x 12mm Screw 2 9.17HRO-70 98 Copper Bushing-#2 4 9.17HRO-98
71 N/A 99 #6202 Bearing 2 9.17HRO-99
72 N/A 100 Transformer-Controller 1 9.17HRO-100
73 Side Rail-Right 1 9.17HRO-73 101 Motor Control Board 1 9.17HRO-101
74 Side Rail-Left 1 9.17HRO-74 102 Elevation Control Board 1 9.17HRO-102
Motor Hood
75 Deck End Cap-Left 1 9.17HRO-75 103
Fixing Bracket 2 9.17HRO-103
76 Deck End Cap-Right 1 9.17HRO-76 104 N/A
M8 x 25mm
77
Deck Fixing Bolt
Deck Grounding
78
Metal Sheet-Upper
10 9.17HRO-77 105 M5 Nut 1 9.17HRO-105
M5 x 10mm
2 9.17HRO-78 106
Philip Head Screw
1 9.17HRO-106
#8 x 10mm Wood
79
Screw 7 9.17HRO-79 107 Lock Pin Guider 1 9.17HRO-107
80 Running Deck 1 9.17HRO-80 108 Lock Pin Push Rod 1 9.17HRO-108
81 Front Roller Shaft 1 9.17HRO-81 109 Deck Frame 1 9.17HRO-109
82 Front Roller 1 9.17HRO-82 110 Spring Load Knob 1 9.17HRO-110
83 Roller Pulley 1 9.17HRO-83 111 Deck Rubber Cushion 10 9.17HRO-111
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
8
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
112 Side Rail Guide Block 8 9.17HRO-112 140
113 M10 x 16mm Bolt 8 9.17HRO-113 141
M6 x 70mm
114
Roller Adjuster Bolt
3 9.17HRO-114 142
115 M8 Nut 10 9.17HRO-115 143
15 x 8mm Spring
116
Washer
12 9.17HRO-116 144 Power Switch 1 9.17HRO-144
117 Board Clip 5 9.17HRO-117 145 Non-Fuse Brak e 1 9.17HRO-145
NO. DESCRIPTION QTY. ORDER NO.
Power Fold Switch
Wire-Upper Section N/A 9.17HRO-140
Power Fold Switch
Wire-Bottom Section 1 9.17HRO-141
Safety Key Power
Wire-Bottom Section
N/A 9.17HRO-142
Wire LoomBottom Section
1 9.17HRO-143
118 Metal Clip 1 9.17HRO-118 146 Power Socket
1
9.17HRO-146
119 Wheel Shaft 2 9.17HRO-119 147 Water Bottle 1 9.17HRO-147
Heart Rate
120 M8 Nylon Nut 3 9.17HRO-120 148
Transmitter Belt
1 9.17HRO-148
Running Deck Belly
121
Pan
1 9.17HRO-121
N/A
149
Deck Frame
122
Rubber Cushion
123 Motor Belly Pan 1 9.17HRO-123
124 Driving DC Motor 1 9.17HRO-124 152 N/A
2 9.17HRO-122
N/A
150
N/A
151
EKG Pulse Sensor
125 Motor Holder 1 9.17HRO-125 153
M8 x 87mm
126
Motor Holder Bolt
1 9.17HRO-126 154
Wire 2 9.17HRO-153
EKG Pulse Sensor
Wire – Upper Section
2 9.17HRO-154
127 30 x 8mm Washer 2 9.17HRO-127 155 Power Folding S witch 1 9.17HRO-155
128 PU Cushion 1 9.17HRO-128
M8 x 15mm
129
Motor Fixing Bolt 2 9.17HRO-129
130 16 x 8mm Washer 2 9.17HRO-130
131 M10 Nylon Nut 1 9.17HRO-131
132 22 x 10mm Washer 1 9.17HRO-132
133 M10 x 188mm Bolt 1 9.17HRO-133
134 Driving Belt 1 9.17HRO-134
135 Bracket Screw 1 9.17HRO-135
136 AMC Sensor N/A 9.17HRO-136
137 Plastic Fixing Insert 6 9.17HRO-137
Wire Loom-Upper
138
Section 1 9.17HRO-138
Safety Key Power
139
Wire-Upper Section
1 9.17HRO-139
Visit us at: www.smoothfitness.com
9
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
1
2
4
3
8
8
148
4
6
8
7
10
154
18
9
18
17
12
16
28
29
153
25
27
24
11
141
30
23
137
13
155
16
31
26
11
35
25
27
20
8
11
22
17
153
8
10
10
154
147
18
9
18
137
29
36
15
16
28
21
32
33
14
16
34
19
138
139
140
19
Visit us at: www.smoothfitness.com
SMOOTH 9.17HRO MOTORIZED TREADMILL
10
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.smoothfitness.com
Loading...