Sinbo SHD 7018 User Manual

SHD 7018 HAIR STRAIGHTENER
INSTRUCTION MANUAL
EN
RU
www.sinbo.com
ENGLISH
SINBO SHD 7018 CERAMIC HAIR STRAIGHTENER INSTRUCTION MANUAL
SAFETY INSTRUCTIONS AND WARNINGS
• Read these ingstructions carefully before putting the appliance into operation and keep them in a safe place for future consultation.
• This appliance is only for domestic use, not industrial use.
• Do not leave the appliance connected and unattended when not in use. Moreover, this will allow saving energy and extending the life of the appliance.
• Do not leave the appliance within the reach of children or disabled individuals.
• Before connecting the appliance to the mains, check that the voltage indicated on the nameplate coincides with the mains voltage.
• Do not use the appliance near the shower, bath or other containers holding water.
• Keep the appliance out of the reach of children.
• Before picking up the appliance after falling into water disconnect it immediately.
• Do not use the appliance on wet hair.
• Do not use the appliance if the cable or plug are damaged, or if not functioning correctly.
• Do not throw or insert anything into any of the appliance’s cavities.
• Do not leave the appliance switched on top of any surface.
• Do not use the appliance where aerosols are in use.
• Do not position the hot parts of the appliance on heat-sensitive surfaces.
• The appliance heats when in operation. Do not bring the hot parts into contact with the skin to avoid burns.
• Never leave the appliance connected to the socket.
• Never put the appliance away when it is still hot or connented.
• No liability is accepted for damage caused through inappropriate handling or use other than that stipulated in this manual.
• Never wrap the cable around the appliance when it is still hot.
INSTRUCTIONS FOR USE
• Connect the appliance to a socket.
• Operate the start/stop switch
• The hair straightener has a built-in ceramic PTC system to keep the temperature of the ceramic plates constant.
• In order to straighten hair perfectly, take a strand which is not too thick.
• Starting at the root, place it between the plates in a perpendicular position and gently pull downwards until reaching the ends of the strand. If necessary, repeat this action various times.
• Apply the same technique to the rest of the hair.
• When finished, disconnect the appliance by putting the switch in the stop position and unplug it from the socket.
- 1 -
CLEANING
• Disconnect the appliance from the mains and leave to cool before proceeding to clean.
• Clean the appliance with a damp cloth and dry afterwards.
• Never submerge the appliance in water or any other liquid or put it under running water.
• Do not use solvents or abrasive products for cleaning.
PROBLEMS AND SOLUTIONS
Should the mains connection fail, do not try to replace it since this is potentially dangerous. Take the appliance to an authorised Technical Support Service. The same applies to an other type of problem.
TECHNICAL FEATURES
• Ceramic coating plate
• On/Off switch
• PTC heater
• 360 ° swivel cable
• AC230V, 50Hz, 40W
Keep instructions for future reference.
The crossed out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authority for details of where
to take the item for re-cycling.
4
3
1. Ceramic coated plates
2
1
2. Indicator light
3. On/off switch
4. 360° swivel power cord
- 2 -
Loading...
+ 6 hidden pages