Sinbo SHC 4350, SHC 4351 Instruction Manual

SHC 4350, SHC 4351 HAIR CLIPPER

INSTRUCTION MANUAL

EN

RU

SHC 4351SHC 4350

www.sinbo.com

ENGLISH

INSTRUCTION MANUAL

TECHNICAL DATA

1

Operated input: AC230V, 50Hz
Power: 8W

2

KNOW YOU PRODUCTION

1. Cutting Head

2. Adjustment Lever

3. ON/OFF Switch

4. Hanging Loop

3

4

NOTICE:

Do not switch on before checking that voltage on the specifications plates is the same
as that in your home;
Switch off when not in use, even if for a moment;
If the supply cord is damaged, it must be replaced by the manufacturer of its service
agent or a similarly qualified person in order to avoid a hazard.
you never use the appliance with damp hands when plugged in (Danger of electric shock!).
The hair clipper only used for household!

HOW TO USE
Preparing the hair clipper:

Ensure that the ON/OFF switch of the device is set to “OFF”. Unroll the cord and insert
the plug in a suitable socket (230V~).

Operating the hair clipper:

The fur to be cut must be dry and clean. Brush the fur carefully to remove any knots. Put
the comb attachment required on the cutting head with the tines pointing upwards and
press the lug into the lower metal edge of cutting head (see illustrations below).

1

2

3

Switch the appliance on by moving the ON/OFF switch upwards (“ON” position). We
recommend to trim a small area first to familiarize yourself with the individual comb
attachments. Start with a comb for long fur. Thereafter, use shorter combs if necessary.
The six comb attachments enable cutting lengths between 3 and 13 mm. Move the
appliance slowly and against growth direction through the fur. Hold the clipper in such

- 1 -

HOW TO USE

a way that the comb attachment lies as flat as possible.
Use the adjustment lever for additional flexibility allowing you to shorten hair gradually
without changing the attachment. By removing the respective comb attachment, i.e. using
the cutting head without any comb you trim clear contours. Please switch off the appliance
immediately after use by moving the ON/OFF switch downwards (“OFF” position).
You can use the hanging loop at the cord for easy storage.

COMB ATTACHMENT
You can choose between 4 comb attachments:

1 = 1/8”: 3.0mm cutting length

2 = 1/4” 6.0mm cutting length

3 = 3/8”: 9.0mm cutting length

1 2

4 = 1/2”: 13.0mm cutting length

CLEANING, CARE AND DISPOSAL
Cleaning the hair clipper:

Switch the appliance off, unplug it and remove the respective comb attachment if set on.
Use the cleaning brush included to remove any residual hair from the cutting head.
Do not clean the cutting head with water or any other fluid except medical alcohol.
Upon regular use, the cutting head should be occasionally oiled (see illustrations below).
Use only acid-free oil, e.g. sewing machine oil. Wipe off excess oil with a piece of cloth.

DISPOSAL:

Do not dispose the appliance via the normal household refuse. Contact your city
or local authority to find out about the proper, environmentally friendly disposal
of the appliance (“electric rubbish”).

43

SAFETY CAUTIONS
WARNING! Polythene bags over the product or packaging may be dangerous. To avoid

danger of suffocation, keep away from babies and children. These bags are not toys.

• Do not use or leave the appliance where it can become wet or where there is a danger
of it falling into basins or other vessels containing water.

• This appliance should only be used as described within this instruction book. Please
retain for reference.

- 2 -

SAFETY CAUTIONS

• Do not leave the appliance unattended when switched on.

• Do not place the appliance on any surface whilst in operation.

• This appliance should not be used by adults or children whose lack of experience,
product knowledge or disability might cause a hazard, unless they have been correctly
instructed and are adequately supervised.

• Children should always be supervised to ensure that they do not play with this product.

• Special care is required when using the appliance close to the ears, eyes and face.

• Always switch off and unplug the appliance when cleaning or when not in use.

• Allow the appliance to cool before storing away.

• After use, do not coil the cord around the appliance as this may cause damage to the
cord. Instead, coil the cord loosely by the side of the appliance.

•This appliance complies with the requirements of Directives 04/108/EEC (Electromagnetic
Compatibility) and 06/95/CE (Electrical Safety of Domestic Appliances).

- 3 -