Silvercrest KH 2600 User Manual

Download

Wake-Up Light6

Wake-Up Light

Operating instructions

KH 2600

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH2600-09/10-V4

KH 2600

1315

12141618

2425

Index

Introduction . . . . . . . . . . . . . .2

Information for these operating

instructions . . . . . . . . . . . . . . . . . . . . 2

Proper use. . . . . . . . . . . . . . . . . . . . . 2

Warnings . . . . . . . . . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . . . . . . .4

Basic Safety Instructions . . . . . . . . . .4

Danger from electric shock . . . . . . . . 5

Danger of hearing damage . . . . . . . 5

Interaction with batteries . . . . . . . . .6

General description . . . . . . . .7

Device summary . . . . . . . . . . . . . . . . 7

Remote control . . . . . . . . . . . . . . . . . 8

Display . . . . . . . . . . . . . . . . . . . . . . . 9

Setting up and connecting .10

Safety instructions . . . . . . . . . . . . . . 10

Package contents and

transportation inspection . . . . . . . .10

Unpacking . . . . . . . . . . . . . . . . . . .10

Disposal of the packaging . . . . . . .11

Requirements for the set-up location 11

Electrical connections . . . . . . . . . . .12

Inserting back-up batteries . . . . . . .12

Activating the remote control battery 13 Changing the remote control battery 13

Providing mains power . . . . . . . . . . 13

VHF wire antenna . . . . . . . . . . . . .13

Connecting the headphones . . . . .13

Handling and operation . . .14

Switching On and Oﬀ . . . . . . . . . .14

Setting the time . . . . . . . . . . . . . . . .14

Adjusting the volume . . . . . . . . . . .15

Radio operation . . . . . . . . . . . . . . .15

Playback music from an iPod/iPhone 17 Playback of external audio devices 19

Playback of nature sounds . . . . . .19

Mood lighting . . . . . . . . . . . . . . . . .19

Reading lamp . . . . . . . . . . . . . . . . .20

Alarm Function . . . . . . . . . . . . . . . .21

Cleaning . . . . . . . . . . . . . . . .25

Safety instructions . . . . . . . . . . . . . . 25

Cleaning the housing . . . . . . . . . . .25

Storage/Disposal . . . . . . . . .25

Storage . . . . . . . . . . . . . . . . . . . . . .25

Disposal of the device . . . . . . . . . . 25

Disposing of the batteries . . . . . . . .25

Troubleshooting . . . . . . . . . .26

Safety instructions . . . . . . . . . . . . . . 26

Malfunction causes and remedies . 26

Appendix . . . . . . . . . . . . . . .27

Information regarding the

EC conformity declaration . . . . . . .27

Technical data . . . . . . . . . . . . . . . .28

Warranty . . . . . . . . . . . . . . . . . . . .29

Service . . . . . . . . . . . . . . . . . . . . . . 29

Importer . . . . . . . . . . . . . . . . . . . . .29

KH 2600

Introduction

Information for these operating instructions

These operating instructions are a component of the KH 2600 Wake-Up Light (henceforth designated as the device) and they supply you with important information about the intended use, safety and connection as well as operation of the device .

The operating instructions must be constantly kept available close to the device. They are to be read and applied by everyone assigned to operate and troubleshoot the device.

Keep these operating instructions and hand them over with the device to any future owners.

This documentation is copyright protected. Any copying or reproduction, including extracts, as well as the reproduction of

images, also in an altered state, is not permitted without express written permission from the manufacturer.

iPhone, iPod, iPod classic, iPod nano, iPod shuﬄ e, and iPod touch are brand names of Apple Inc., registered in the USA and other countries.

Proper use

This device is intended only for reception of VHF radio programmes, for the connection of external devices (i.e. MP3 players) and iPod/iPhone and for alarms by means of audible signals, nature sounds, radio or music from an iPod/iPhone, in enclosed spaces. This device is not intended for any other use or for uses beyond those mentioned.

WARNING Danger from unintended use!

Danger can come from the device if used for unintended purposes and/or other types of use.

Use the device exclusively for intended purposes. ► Observe the procedures described in these operating instructions. ►

Claims of any kind resulting from damage caused by improper use, incompetent r

s, unauthorized modiﬁ cations or the use of non-approved spare parts will

epair

not be acknowledged. The operator alone bears liability.

KH 2600

Introduction

Warnings

In the current operating instructions the following warnings are used:

DANGER

A warning at this danger level indicates a threatening dangerous situation.

If the dangerous situation is not av injury.

Follow the instructions given in this warning notice to avoid the risks of ► death or serious injury to people.

WARNING A warning of this danger level signiﬁ es a possible dangerous

situation.

If the dangerous situation is not avoided it can lead to injuries.

The directives in this warning are there to avoid personal injuries. ►

IMPORTANT

A warning of this danger level signiﬁ es possible pr damage.

If the situation is not avoided it can lead to property damage.

The directives in this warning are there to avoid property damage. ►

oided, it could result in death or serious

operty

KH 2600

NOTICE

A notice signiﬁ es additional information that assists in the handling of the ► device.

Safety

In this chapter you receive important safety information regarding handling of the device.

This device complies with the statutory safety regulations. Incorrect usage can, however, lead to personal injury and property damage.

Basic Safety Instructions

For safe handling of the device observe the following safety information:

Before use check the device for visible external damage. Do not put into ■ operation a device that is damaged or has been dropped.

er use the device if the lamp housing is damaged, broken or missing. ■

Nev Damaged cables or connections should be replaced by authorized qualiﬁ ed ■

persons or by the customer service department. P

sons who, due to their physical, intellectual or motor abilities, are incapable ■

er of operating the device safely may only use the device under supervision or direction fr

Only permit children to use the device under supervision. ■ Repairs should only be carried out by authorized specialist companies or by ■

the customer service department. Incompetent repairs can result in signiﬁ cant risk

A repair to the device during the warranty period may only be carried out ■ by a customer service department authorized by the manufacturer otherwise no additional warr

Defective components may only be replaced with original replacement parts. ■ Only by using original replacement parts can you guarantee that the safety requir

Protect the device from moisture and liquid penetration. Never submerge the ■ device in water, never locate the device in the close vicinity of water and nev

om a responsible person.

s for the user

ements are complied with.

er place any objects ﬁ lled with liquids (such as vases) on the device.

. In addition warranty claims become void.

anty claims can be considered for subsequent damages.

KH 2600

Safety

Do not operate the device close to open ﬂ ames (e.g. candles). ■ Avoid direct sunlight. ■ Do not use the device when the room temperature is below 10° C or above ■

35° C. If y

such at present, consult your doctor before you use the device. Alw

never pull on the connection cable. If malfunctions occur or thunder storms threaten pull the po

wall socket.

ou hav

s pull on the power plug when disconnecting from the wall socket, ■

e previously suﬀ ered from severe depression or are suﬀ ering from ■

Danger from electric shock

DANGER

Risk of fatal electrocution! A life-t

hreatening situation can arise from contact with live

wires or components!

Observe the following safety instructions to avoid electric shock hazards:

Do not use the device if the mains power plug or the connection cable are ► damaged.

Do not, under any cir electric shock is present if the power carrying connections are touched or the electrical and mechanical construction is changed.

cumstances, open the device housing. The risk of an ►

wer plug from the ■

Danger of hearing damage

WARNING

Danger from extreme volumes!

Listening to loud music via connected headphones can result in hearing damage.

Avoid extreme volumes, especially over long periods of time, ► when you are using headphones.

KH 2600

Safety

Interaction with batteries

WARNING Danger from improper use!

For safe handling of batteries observe the following safety instructions:

Do not throw batteries into a ﬁ re. ► Do not short circuit batteries. ► Do not attempt to recharge batteries. ► Regularly check the condition of the batteries. Leaking battery acid can

►

cause permanent damage to the device. Special caution should be shown when handling damaged or leaking batteries. Danger from acid burns! Wear protective gloves.

Store batteries in a place inaccessible to children. When swallowed seek ► immediate medical attention.

ve the batteries from the device and the remote control if you do not ►

Remo intend to use the device for an extended period of time.

KH 2600

General description

Device summary

For the following see the diagrams on the fold out sides.

Lamp housing

Halogen lamp (42 W, E27)

Mood light (3 LEDs: green, blue and red)

Display

Station for iPod/iPhone

button: Volume increase

button: Volume decrease

SNOOZE Button: Activate snooze function / set the mood light colour

button: Reduce light intensity

button: Increase light intensity

►►I button: Title skip forwards / fast forward play (iPod/iPhone) / station search

(Radio) / selection of nature sounds 1-4

FUNC.: Select function I◄◄ button: Title skip backwards / fast backward play (iPod/iPhone) / station

search (Radio) / selection of nature sounds 1-4

SLEEP button: Set automatic switch oﬀ / change between 12h/24h time of day

display

►II button: Playback start / stop

Alarm2/UP button: Programme alarm 2 / memory slot selection upwards

MEMORY/TIME button: Save station (Radio) / setting the time in standby mode /

stop playback of iPod/iPhone

Alarm1/DOWN button: Programme alarm 1 / memory slot selection downwards

button: Switch lamp on/oﬀ / activate wake-up light function during wake time

programming

/ALARM OFF button: Switch device on/oﬀ / switch alarm oﬀ (Alarm)

Headphones connection socket

AUX IN: Audio input for the connection of an external device Mains connection cable

Wire antenna for VHF reception

Temperature sensor

Battery compartment

KH 2600

General description

Remote control

All device functions can be carried out with the remote control.

3 4

: Standby 2 ►►I : Fast play forward 3 I◄◄ : Fast play backwards

14 13 12 11 10

Memory control: MEM: Programming stations

MEM +: Selecting memory slot MEM -: Selecting memory slot

Alarm control: Alarm ON/OFF AL1: Programme alarm1 / memory slot

6 TIME: Set time of day 7 SNOOZE: Activate snooze function 8 SLEEP: Automatic switch oﬀ

10 11 12 13 ►II : Play/Pause 14 FUNC: Select function 15 COLOR: Select mood light colour

selection downwards

AL2: Programme alarm2 / memory slot

selection upwards

Lamp control:

: Lamp ON/OFF

: brighter : darker

: Volume decrease

: Stop

: Volume increase

KH 2600

General description

Display

The symbols in the display have the following meanings:

Symbol Meaning

Alarm 1 activated

Alarm 2 activated

Alarm tone

Radio function

Lamp / wake-up light function

Nature sound 1

Nature sound 2

Nature sound 3

Nature sound 4

Stereo reception

iPod/iPhone function

Automatic switch oﬀ activated External audio device VHF reception

KH 2600

Temperature Display

Memory slot indicator

Light intensity indicator

Volume level indicator

Snooze function activated

Setting up and connecting

Safety instructions

WARNING Damage may occur to people and property when operating

the device!

Observe the following safety information to avoid any risks:

Packaging material should not be used as a play thing. There is a risk of ► suﬀ ocation!

To av

oid risks to persons and property, pay attention to the requirements ►

for the set-up location and the electrical connections.

Package contents and transportation inspection

The device is delivered with the following components as standard:

Wake-Up Light ▯ Remote control with battery (CR 2032, 3V) ▯ 2 x Batteries type AA, 1.5 V ▯ 5 x Adapter docks for iPod/iPhone ▯ Operating instructions ▯

NOTICE

Check the contents to make sure everything is there and for visible damage. ► If the items supplied are incomplete, or damaged due to defective ►

packaging or transportation, contact the Service Hotline (see chapter

Service

Unpacking

Remove all parts of the device and the operating instructions from the box. ¡ Remove all packing material. ¡

KH 2600

Setting up and connecting

Disposal of the packaging

The packaging protects the device from transport damage. The packaging materials are chosen from an environmentally friendly and disposal technological point of view and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed according to the regionally established regulations.

NOTICE

If possible preserve the device's original packaging during the warranty ► period so that in the case of a warranty claim you can package the device properly for r

eturn.

Requirements for the set-up location

For safe and fault free operation of the device, the set-up location must fulﬁ ll the following conditions:

Place the device on a ﬁ rm, ﬂ at and level surface. ■ To avoid overheating maintain a free space of at least 15 cm around and ■

40 cm above the device. Do not position the device in a dust

in the vicinity of ﬂ ammable materials. Protect the de The surfaces of furniture may contain components that could aﬀ ect and ■

soften the rubber feet on the device. If necessary, place an anti-slip mat or similar under the rubber feet of the de

The w can be quickly withdrawn from the socket.

vice from vibration. ■

all socket must be easily accessible so that, in an emergency, the plug ■

y, hot, wet or very humid environment or ■

vice.

KH 2600

Setting up and connecting

Electrical connections

Before connecting the device, compare the connection data (voltage and ■ frequency) on the rating plate of the device with that of your power supply network. This data must tally in order to avoid damage to the device.

Make sure that the device's connection cable is not damaged and is not ■ laying over hot surfaces and/or sharp edges.

Make sur Do not allow the connection cord to hang over edges (Trip wire eﬀ ect). ■

e that the connection cable is not tightly stretched or bent. ■

Inserting back-up batteries

By inserting the batteries you can avoid the loss of programmed time of day and alarm wake time in the event of a possible power outage. The batteries make sure that the internal clock continues to run even during a power outage. When power is restored the correct time appears automatically in the display

NOTICE

The back-up batteries only save the time of day and the programmed wake ► time. All other functions are only possible with mains power operation.

The device can also be oper

Slide the access cover of the battery compartment ¡ the device in the direction of the arrow and remove the access cover.

Insert 2 batteries type AA (supplied) into the battery compartment. Make ¡ sure that you observe the polarity as depicted in the battery compartment.

Close the battery compar and allow it to lock into place.

ated without batteries. ►

on the underside of

tment by replacing the access cover, slide back in ¡

KH 2600

Setting up and connecting

Activating the remote control battery

The remote control battery is already inserted when delivered.

Activate the battery by removing the isolation strip. ¡

Changing the remote control battery

Press, with the ﬁ ngernail, the recess (A) to the right ¡ and, at the same time, pull the battery compartment out.

Insert a 3 V battery type CR 2032 in the battery ¡ compartment. The side with the marking "+" points upwar

ds.

Slide the battery compartment completely back into ¡ the remote control.

Providing mains power

Place the device approx. 40 to 50 cm away from your head (i.e. on the ¡ bedside table).

Plug the mains power plug into a wall socket. In the display ¡ day (0:00 o'clock) and the temperature will be shown.

the time of

VHF wire antenna

For VHF reception completely unfold the wire antenna ¡

Connecting the headphones

If required you can connect headphones (with a 3.5 mm jackplug) to the ¡ connection socket switch oﬀ automatically.

KH 2600

on the rear panel of the device. The speakers then

Handling and operation

In this chapter you receive important information for the handling and operation of the device.

Switching On and Oﬀ

Press the ¡ /ALARM OFF button 20 or the button on the remote control to switch the device on. The display

Press the ¡ to switch the device oﬀ . In the display 4 is shown the time of day, the temperature and a programmed alarm time (Standby mode).

NOTICE

The ► from the mains power. To completely disconnect the device from the mains power the mains power cable plug

Setting the time

Prerequisite: The device is in standby mode.

Press the MEMORY/TIME button ¡ control. The hour indicator in the display

Press the SLEEP button ¡ 12h/24h time of day display.

Set, with the ►►I button ¡ hour. With each button press the time changes by one hour. Holding down the respective button for more than 2 seconds starts the speed setting.

Press the MEMORY/TIME button ¡ control. The minute indicator in the display 4 blinks.

Set, with the ►►I button ¡ minutes. With each button press the time changes by one minute. Holding down the respective button for more than 2 seconds starts the speed setting.

Press the MEMORY/TIME button ¡ control to conﬁ rm the time input or wait for approx. 7 seconds after which the time input will be automatically conﬁ rmed.

/ALARM OFF button 20 or the button on the remote control

/ALARM OFFbutton 20 does not completely disconnect the device

for approx. 2 seconds to switch between the

is activated.

must be pulled from the mains socket.

or the TIME button on the remote

blinks.

or the I◄◄ button 13 , the current time of day

or the TIME button on the remote

or the I◄◄ button 13, the current time of day

or the TIME button on the remote

NOTICE

The time of day will revert back to 0:00 o'clock if the device is disconnected ► from the mains power supply with no back-up batteries inserted or if the back-up batteries ar

e too weak.

KH 2600

Handling and operation

Adjusting the volume

Prerequisite: The device is switched on.

Press the ¡ control to adjust the volume. The set volume level is shown below and to the right in the display

NOTICE

The set volume applies for all functions. ► The volume you have selected will also be saved automatically as the ►

volume for the wake function.

button 6 or button 7 on the device or on the remote

Radio operation

NOTICE

For a good radio reception the wire antenna ► coiled. Adjust the antenna, whilst in radio operation, to the best reception.

Switching on the radio

Press the ¡ /ALARM OFF button 20 or the

button on the remote control to switch the

device on. Press the FUNC. button ¡

select the radio function. In the display appears the symbol

tion frequency of the set station.

several times to

and the current recep-

must be completely un-

Manual station selection

Press the ►►I button ¡ desired station gradually with each button press.

Automatic station search

Press and hold down the ►►I button ¡ seconds. The device automatically searches for the nearest station with sufficient reception quality.

NOTICE

If the reception quality is especially high, in the display ► stereo symbol .

KH 2600

or I◄◄ button 13 briefly to set the frequency of the

or I◄◄ button 13 for at least two

appears the

Handling and operation

Saving stations manually

The device has 20 memory slots available for station frequencies. To save a station frequency proceed as follows:

Press the ¡ to switch the device on.

Press the FUNC. button ¡ Select a station with the ►►I button ¡

Press the MEMORY/TIME ¡ MEM button on the remote control. "MEMORY" appears in the display

Press the A ¡ LARM1/ALARM2 button or the MEM-/MEM+ button on the remote contr to select the desired memory slot between 01 and 20.

Press the MEMORY/TIME ¡ MEM button on the remote control again to save the reception frequency of the set station to the selected memory slot.

NOTICE

If no input is made within approx. 5 seconds after the MEMORY/TIME ► button or the MEM button on the remote control is pressed the "MEMORY 01" indicator in the display goes out and the current station is not sav

/ALARM OFF button 20 or the button on the remote control

several times to select the radio function.

or the I◄◄ button 13.

button 17 or the

and "01" blinks.

button 17 or the

ed.

Selecting a saved radio station

Press the ¡ /ALARM OFF button 20 or the

button on the remote control to switch the

device on. Press the FUNC. button ¡

select the radio function. Select with the A ¡ LARM1/ALARM2 buttons or

the MEM-/MEM+ buttons on the remote control the desired memory slot for the saved station between 01 and 20.

several times to

KH 2600

Handling and operation

Playback music from an iPod/iPhone

With the station 5 you can use the device as a speaker for your iPod/iPhone. If you insert the iPod/iPhone in the station it will, in addition, be automatically charged.

The device is equipped with 5 adapters for the station thus even the most current iPod/iPhone models will, in any case, ﬁ t into the station. The adapters, provided with numbers, are on the rear panel. In the table you will ﬁ nd, itemized, the adapter that is to be used for your model.

You can use the station for the following iPod and iPhone models:

Model Type Adapter

5G iPod (with video) 30GB 9 U2 iPod with video 30GB 9 iPod classic 80GB, 120GB 9 iPod touch 8GB & 16GB 14 iPod touch 2G 8GB, 16GB, & 32GB 14 iPod touch (Fall 2009) 16GB, 32GB, & 64GB 14 iPhone 3G 8GB & 16GB 15 iPhone 3GS 16GB & 32GB 15 iPod nano (4th generation) 8GB & 16GB 17 iPod nano (5th generation) 8GB & 16GB 18

KH 2600

IMPORTANT

Damaging of the device or the iPods/iPhones!

Inserting the iP device and/or the iPods/iPhones.

Place the iPod/iPhone in the station only with the proper adapter. ► In the event that the proper adapter has not been provided get in touch ►

with the Service-Hotline (see chapter Service

ods/iPhones without an adapter can result in damage to the

Handling and operation

Inserting / removing the adapter in / from the station

Select from the table the required adapter and place it in the station dock as follows:

Lay the front edge of the ¡ adapter on the front edge of the dock.

Press the r wards until you hear a light "click".

To remove the adapter from the dock proceed as follows:

Grip with the thumbnail in the groove and lift the adapter out of the dock. ¡

ear edge down- ¡

Station

Playback of music

Insert your iPod and/or iPhone into the station ¡

Press the FUNC. button ¡ In the display

Title skip and fast forward / backward

Press the ►►Ibutton ¡ beginning of the next title.

Press the I◄◄ button ¡ beginning of the current title. Press the I◄◄ button to the beginning of the previous title.

Hold down the ►►I button ¡ ward.

Press the MEMORY/TIME ¡ control to stop playback.

appears the symbol and the music playback can begin.

several times to select the iPod/iPhone function.

on the device or on the remote control to skip to the

or I◄◄ button 13 for fast forward / back-

button 17 or the button on the remote

a second time to skip

Groove

Adapter

Charging the iPod/iPhone

If your iPod/iPhone is inserted into the station it will charge automatically until the battery is full.

NOTICE

The iPod/iPhone will not charge via the back-up battery. ►

KH 2600

Handling and operation

Playback of external audio devices

Connect an external audio device, for example, an MP3 player to the ¡

3.5 mm jackplug socket AUX IN Press the FUNC. button ¡ Start playback of the external audio device and set the volume. ¡

NOTICE

Follow the operating instructions for the external audio device. ►

on the rear panel of the device.

several times to select the AUX function.

Playback of nature sounds

Press the ¡ /ALARM OFF button 20 or the button on the remote control to switch the device on.

Press the FUNC. button ° tion

Select with the ►►I button ¡ 4 nature sounds:

Rain Babbling brook Seagulls Rural life

several times to select the nature sounds func-

or the I◄◄ button 13 between the following

Mood lighting

Press the SNOOZE button ¡

The LEDs light up in the following sequence: blue → red → red + blue → green → green + blue → red + green → all LEDs → etc.

Press the SNOOZE button ¡ this colour permanently.

Press the SNOOZE button ¡

on the device to switch on the mood lighting.

again when the desired colour lights up to set

once more to switch oﬀ the mood lighting.

KH 2600

NOTICE

Instead of the SNOOZE button ► control can also be used.

The colour setting via the SNOOZE button ► function has been activated.

the COLOUR button on the remote

will not work if the SNOOZE

Handling and operation

Reading lamp

You can use the device as a reading lamp.

Press the ¡ lamp on and oﬀ .

Press the ¡ light intensity (00 to 20) are shown in the display 4.

NOTICE

If you have set the light intensity to 00 you can, by all means, set a higher ► value, the lamp remains, however, switched oﬀ and must be switched back on via the

The light intensity that you have selected will also be saved automatically ► as the light intensity for the wake function.

Replacing the halogen lamp

The halogen lamp 2 must be replaced if it is defective or the light intensity decreases.

DANGER

Risk of fatal electrocution!

Pull the plug from the mains sock

NOTICE

The halogen lamp ► type: E27 42 W.

button 19 on the device or on the remote control to switch the

/ button to set the brightness. The symbol and the

button 19 on the device or on the remote control.

must only be replaced with one of the same lamp

et before you change the halogen lamp ►

Turn the lamp housing ¡ tion of the arrow and lift it upwards.

Unscrew the defective halogen lamp ¡ from the lamp socket.

Scre

w a new 42 W halogen lamp into ¡

the lamp socket. Place the lamp housing ¡

from above and turn it in the opposite direction to the arrow to attach.

in the direc-

carefully

KH 2600

Handling and operation

Alarm Function

When setting the wake time you conﬁ gure the light intensity, the wake sound and the volume. In the 30 minutes before the set wake time the light intensity increases slowly to the selected level. When the set wake time is reached the sound level increases, within 90 seconds, slowly to the selected volume.

Programming alarm wake times

The device has two alarms available. All settings for both alarms can be carried out independently from each other. You can choose whether, at the programmed time, an alarm tone or a variety of nature sounds should be played, whether the radio should sound out or music from an iPod/iPhone or an external audio device should be played.

Prerequisite: The device is in standby mode.

Press the ALARM1/DOWN button ¡ ALARM2/UP button AL1/AL2 button on the remote control. The hour indicator in the display

Set with the ►►I button ¡ the hour. With each button press the time changes by one hour. Holding down the respective button for more than two seconds starts the speed setting.

Press the ALARM1/DOWN button ¡ ALARM2/UP button AL1/AL2 button on the remote control. The minute indicator in the display

Set with the ►►I button ¡

the minutes. With each button press the time changes by one minute. Holding down the respective button for more than two seconds starts the speed setting.

Press the ALARM1/DOWN button ¡ device or the AL1/AL2 button on the remote control again to conﬁ rm the setting.

on the device or the

blinks.

or the I◄◄ button 13

on the device or the

or the I◄◄ button

blinks.

/ALARM2/UP button 16 on the

KH 2600

Handling and operation

Setting the wake tone

Press the ►►I button ¡ repeatedly to select a wake tone:

→ → → → → → →

delete. (For an explanation of the symbols see chapter Display.)

Press the ¡ wake-up light function.

NOTICE

Set the volume that you want to be woken with as described in the chapter ► Setting the volume.

Set the light intensity that y chapter Reading lamp.

The w tone. The light intensity increases in the 30 minutes before the set wake time and the

To be woken with the wake-up light only the volume must be set to 00. ►

Press the ALARM1/DOWN button ¡ device or the AL1/AL2 button on the remote control again to conﬁ rm the setting or wait approx. 7 seconds and the alarm will be conﬁ rmed automatically.

The symbol for the selected wake tone blinks in the display and the alarm goes oﬀ via the speaker with the arrival of the wake time.

button to activate, in addition, the

ake-up light function can only be activated together with a wake ►

or the I◄◄ button 13

ou want to be woken with as described in the ►

symbol blinks in the display 4.

/ALARM2/UP button 16 on the

NOTICE

If you want to use music from your iPod/iPhone as the wake tone select a ► title on the iPod/iPhone (or an album and/or playback list) that is to be used as a wak time arrives.

e tone. Your choice will be played back when the set wake

KH 2600

Handling and operation

Switching the alarm oﬀ

Snooze function ("SNOOZE" function)

Whilst the alarm is sounding press the SNOOZE ¡ button In the display After 9 minutes the alarm sounds again.

(In the diagram on the right both alarm 1 and alarm 2 are programmed. The alarm 2 goes oﬀ and the symbol blinks.)

Switching the alarm oﬀ

When the programmed time is reached the alarm continues to sound until it is switched oﬀ .

Press the ¡ to switch the alarm oﬀ .

Press the ¡

Fast switch on/oﬀ of t Prerequisite: The device is in standby mode.

Press the ALARM1/DOWN button ¡ device or the AL1/AL 2 button on the remote control continually until the alarm symbol / in the display appears/disappears.

to temporarily switch oﬀ the alarm.

appears the notice .

/ALARM OFF button 20 or the button on the remote control

button if you have activated the wake-up light function.

NOTICE

The alarm goes oﬀ again within 24 hours. ►

he alarm

/ALARM2/UP button 16 on the

KH 2600

NOTICE

The last selected alarm settings remain saved. ►

Handling and operation

Deleting wake times

blinks.

Press the ALARM1/DOWN button ¡ device or the AL1/AL 2 button on the remote control three times until the alarm symbol in the display

Press the ►►I button ¡ appear in the display 4.

Press the ALARM1/DOWN button ¡ device or the AL1/AL2 button on the remote control again or wait approx. 10 seconds. There are no more wake times programmed.

or the I◄◄ button 13 until no more wake tones

Automatic Switch-oﬀ ("SLEEP" function)

With the sleep function you can listen to your favourite music or your favourite station whilst falling asleep. The device switches itself oﬀ after a time between 10 and 90 minutes.

Prerequisite: The device is set to either the radio, AUX IN or iPod/iPhone function.

Press the SLEEP button ¡ and the notice

Press the SLEEP button ¡ 10 minutes with each button press. Setting options: 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. After ﬁ ve seconds the selected setting is saved.

Press the SLEEP button ¡ To end the sleep function before it is automatically ended press the ¡

ALARM OFF button

. In the display 4 appears the symbol

again to reduce the time in increments of

again to switch oﬀ the "Sleep" function.

or the button on the remote control.

/ALARM2/UP button 16 on the

KH 2600

Cleaning/Storage/Disposal

Cleaning

Safety instructions

DANGER

Risk of fatal electrocution!

Remo

ve the plug from the mains power socket before cleaning. ►

IMPORTANT

Damage to the device!

Make sur in order to avoid irreparable damage to it.

e when you are cleaning the device that no moisture gets inside ►

Cleaning the housing

Clean the surfaces of the device with a soft, dry cloth. ■

Storage/Disposal

Storage

If you do not intend to use the device for an extended period of time disconnect it from the power supply, remove the batteries and store it in a clean, dry location that is not subjected to direct sunlight.

Disposal of the device

Do not dispose of the device in your normal domestic waste. This product is subject to the European directive 2002/96/ECWEEE (Waste Electrical and Electronic Equipment).

Dispose of the device through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Disposing of the batteries

Do not dispose of the batteries with household waste. Every consumer is legally obligated to hand in batteries at a collection centre in his/her community/district or a dealer. This obligation is intended to ensure that batteries are disposed of in an environmentally friendly manner. Hand batteries in only when they are fully discharged.

KH 2600

Troubleshooting

In this chapter you will receive important information for malfunction localization and remedies. Observe the instructions in order to avoid danger and damage.

Safety instructions

WARNING

Observe the following safety information to avoid danger and property damage:

Repairs to electronic devices may only be carried out by specialists who ► have been trained by the manufacturer. Considerable danger to the consumer and damage to the device can occur as a r

Malfunction causes and remedies

The following table will help with localizing and remedying minor malfunctions:

Defect Possible cause Solution

Insert the plug into the mains power socket.

Check the circuit fuse.

Increase the volume with the button remote control.

Remove the headphones plug from the connection socket

Start playback of the audio device.

Tune the station correctly with the ►►I button

Try to improve reception by moving the wire antenna

The display is showing nothing.

No sound.

Noisy radio reception

The plug is not inserted.

Mains power socket is not supplying power.

The volume is set to minimum.

Headphones are connected.

Playback of the audio device has not been started.

The radio station is not properly tuned in.

Reception is too weak.

esult of incorrect repairs.

on the device or on the

or the I◄◄ button 13.

KH 2600

Troubleshooting/Appendix

Defect Possible cause Solution

The alarm does not go oﬀ .

iPod/iPhone does not charge.

NOTICE

If you cannot solve the problem with the aforementioned methods, please ► contact Customer Service.

The alarm time is incorrectly programmed.

The alarm is not programmed.

The device is not in standby mode.

The mains power plug is not plugged in.

Check the programmed wake time.

Programme the alarm correctly.

Switch the device to the standby mode before you go to sleep.

Insert the plug into the mains power socket.

Appendix

Information regarding the EC conformity declaration

This device complies regarding conformance to the basic requirements and other relevent regulations of the European directive for electromagnetic compatibility 2004/108/EC, the low voltage directive 2006/95/EC as well as the Ecodesign directive 2009/125/EC (Supplement 1275/2008 Appendix II, Nr.1)

The complete original declaration of conformity can be obtained from the importer.

KH 2600

Appendix

Technical data

Operational voltage 220-240 V / 50 Hz

Backup batteries

Remote control Battery: 3 V, CR 2032

Power consumption Operation with light 50 W

Operation without light 10 W Standby approx. 1.7 W

Speaker power output: 2 x 1 W (with 10 % harmonic distortion)

Headphone Output Voltage max. 120 mV

Radio frequency range (VHF) 87.5 - 108 MHz

Lamp E27 max. 42 W

Operating temperature +10 - +35 °C

Humidity (no condensation) 5 - 90 %

Dimensions (H x W x D) 29 x 17.5 x 19.5 cm

Weight approx. 1650 g

2 x 1.5 V Typ “AA”

(supplied)

Protection class

KH 2600

Appendix

Warranty

You receive a 3-year warranty for this device as of the purchase date. This device has been manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim, please get in touch by telephone with our service department. Only in this way can a post-free dispatch for your goods be assured.

NOTICE

This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void..

Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs eﬀ ected under warranty. This applies also to replaced and repaired parts.

Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date.

Repairs carried out after the lapse of the warranty period are subject to charge.

Service

DES UK LTD

Tel.: 0871 5000 700 e-mail: support.uk@kompernass.com

Kompernass Service Ireland

Tel: 1850 930 412

Standard call rates apply. Mobile operators may vary.

e-mail: support.ie@kompernass.com

The warranty adjustment is valid only for material or manufacturing defects ► not, however, for transport damage, wear and tear or for damage to breakable parts, i.e. switches or r

(£ 0.10 / minute)

(0,082 EUR/Min.)

echargeable batteries.

Importer

KH 2600

KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com

Silvercrest KH 2600 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual