Page 1
3000Cla-IM1-2-en.bk Seite 1 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000ClaU.fm
05.01.00
Gigaset
3000
Classic
ENGLISH
8
Operating Instructions
and Safety Precautions
Page 2
3000Cla-IM1-2-en.bk Seite 2 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
Brief overview
The display is protected by a film.
protective film.
Base station icon
–
stationary:
for outgoing/incoming calls
–
flashing:
base station
contact
Speed dialling
activate
Set key
– to save
– for settings
End call key
– end call
–
on/off:
hold down
Recall key
– for systems
& select services
–
insert pause:
hold down
no
ready
¤
Please remove
3000ClaU.fm
Charging
status
full
¤
empty
§
Redial
a number
Make
internal call
Ta l k key
– accept
call
– dial call
number
Keypad
protection
on/off:
hold down
Delete
characters
05.01.00
8
Display keys
When icons are displayed above the 3 keys in the display,
the meaning of these icons is as follows:
Scroll down
Scroll up
2
Confirm
Page 3
3000Cla-IM1-2-en.bk Seite 3 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
Quick reference guide
Function Key combination
Activate/deactivate
the handset
Activate/deactivate
keypad protection
Answer a call
Make an external call
Redial a number
Save a speed dial number
Dial a speed dial number
Hold down for 1 second
Hold down } for 1 second
D
PD
1 or aD
z-e.g. sbP
b
-a
or
e.g. ·D
3000ClaU.fm
05.01.00
8
Dial a number from
the call list
Set the handset
volume
Mute the microphone
Make an internal call
Call all handsets
Tr a n s fe r c all
(connect)
Internal enquiry call
zsaD
z¸¨b e.g. sb
{ Microphone
4 Microphone
{ e.g. ·
{~
{ e.g. s
{ e.g. s;
Terminate enquiry call: 4
muted
on
;
3
Page 4
t
3000Cla-IM1-2-en.bk Seite 4 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000ClaU.fm
Safety precautions
• Never use ordinary (non-rechargeab
• le) batteries. Only use
type
(rechargeable), as otherwise battery damage can re-
sult (dangerous), see table page 7.
• The handset’s battery compartments feature the following
diagrams:
Insert rechargeable batteries correctly in
g
accordance with polarity symbols.
Operate battery type in accordance with these
h
operating instructions.
• Do not use non-Siemens charging devices, as this could
damage the batteries.
• Batteries heat up during charging – this is a normal occurrence and is not dangerous.
• The handset can affect medical equipment.
• The handset can cause unpleasant humming in hearing
aids.
• Do not operate the handset in environments where there
is risk of explosion, such as a paint shop.
• Always include the operating instructions when passing
your handset onto third parties.
• The batteries and handset should be disposed of in an
environmentally-friendly manner.
approved batteries of the same
05.01.00
8
Displays
Base station icon
Charging status icon
¥
Mailbox function:
ª
New number in
the caller list
Off hook
C
External connection
(;7
Internal connection
,17
Handset locked
£
4
1
_ Blank
J
P
1GJ
____ Keypad protection
Pause
Star key
Pound key
Recall key
New message to
answering machine
Telephone PIN inpu
~
}
4
Page 5
3000Cla-IM1-2-en.bk Seite 5 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000ClaIVZ.fm
Contents
Brief overview ................................................................... 2
Display keys......................................................................2
Quick reference guide ...................................................... 3
Safety precautions............................................................ 4
Displays.............................................................................. 4
Preparing the handset...................................................... 6
Inserting the batteries.......................................................6
Charging the batteries ......................................................7
Attaching the belt clip .......................................................8
Activating/deactivating the handset ..................................8
Activating/deactivating keypad protection ........................8
Registering the handset................................................... 9
Making calls .................................................................... 10
Making an external call ...................................................10
Making an internal call ....................................................10
Answering a call..............................................................10
Transferring a call, enquiry call........................................11
Redial ............................................................................... 11
Speed dialling ................................................................. 12
Saving/changing/deleting call numbers........................... 12
Speed dialling..................................................................12
Deleting the speed dial list .............................................13
Call-by-call support......................................................... 13
Security............................................................................ 14
Changing the telephone PIN ...........................................14
Activating direct station selection ...................................14
Activating the handset lock.............................................15
Deactivating the handset lock/direct station selection....15
Settings............................................................................ 16
Ringer volume.................................................................16
Ring tones.......................................................................16
Handset volume..............................................................16
Activating/deactivating beeps .........................................17
Activating/deactivating base station display....................17
Activating/deactivating auto talk .....................................18
Resetting the factory settings.........................................18
Changing the base station ..............................................19
Switching to tone dialling................................................19
Appendix ......................................................................... 20
05.01.00
5
Page 6
3000Cla-IM1-2-en.bk Seite 6 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Preparing the handset
Contents of the package
Gigaset 3000 Classic handset, 2 batteries, belt clip,
operating instructions.
Inserting the batteries
• Never use ordinary (non-rechargeable) batteries.
Only use
(rechargeable), as otherwise battery damage can
result (dangerous), see table page 7.
• The handset’s battery compartments feature the
following diagrams:
g
h
• Do not use non-Siemens charging devices, as
this could damage the batteries.
• Please dispose of old, defective batteries in an
environmentally friendly manner in accordance
with the relevant legislation.
approved batteries of the same type
Insert rechargeable batteries correctly in
accordance with polarity symbols.
Operate battery type in accordance with
these operating instructions.
05.01.00
• Insert the batteries, ensuring
re on left.
• Insert the battery cover approx.
compartment
ce.
To o p e n
•
cover and slide
6
and slide it
the battery cover, press the grooved area on the
downwards
correct polarity
upwards
.
– see figu-
3 mm into the battery
until it clicks into pla-
Page 7
3000Cla-IM1-2-en.bk Seite 7 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Charging the batteries
The batteries supplied are
To charge the batteries, insert the handset in the base station or Gigaset 3000L charging unit (accessory) – you will
hear the confirmation beep. The charging status icon flashes
on the handset display to indicate that a charging operation
is in progress:
§
¦
Batteries empty
Batteries 1/3 charged
– We recommend initially charging the batteries for at least
16 hours without interruption – irrespective of the
charging status icon.
– Once the first charging operation is complete, you can
replace the handset in the base station after every call.
Charging is controlled electronically. This ensures optimum charging and prolongs battery life.
– The batteries heat up during charging.
– The battery charging status is only displayed correctly
after uninterrupted charging/discharging. You should
therefore avoid opening the battery compartment unnecessarily.
Approved batteries:
not charged
¥
¤
.
Batteries 2/3 charged
Batteries full
05.01.00
Nickel-cadmium (NiCd) Nickel-metal-hydride (NiMH)
Sanyo N-3U (700 mAh) Sanyo H-3 U (1500 mAh)
GP GP60AAKC (600 mAh) GP GP130 AA HC (1300 mAh)
Varta 751RS (700 mAh) GP GP150 AA HC (1500 mAh)
Mobile Power 700 (700 mAh) Varta VH 1101 or Phone Power
Panasonic 60 DT (600 mAh) Panasonic HHR-110 AA (1100 mAh)
(1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
Always replace both batteries and only use batteries of the
same type/from the same manufacturer.
7
Page 8
3000Cla-IM1-2-en.bk Seite 8 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Handset operating time/charging time:
Capacity
(mAh)
700
110 0
1500
Standby time
(hours)
up to 100 over 10 approx. 5
up to 160 over 15 approx. 9
up to 220 over 20 approx. 12
Ta l k time
(hours)
Charging
time
(hours)
Attaching the belt clip
Press the belt clip against the back of the handset until the
side protrusions click into place in the holes provided.
Activating/deactivating the handset
Press the end call key for
1 second
.
05.01.00
The handset automatically activates as soon as you insert
the batteries and place it in the base station/charging unit.
Activating/deactivating keypad protection
When keypad protection is activated, the keypad buttons are
ineffective.
Calls can be accepted with the talk key
} Hold key down for
1 second
to activate/deactivate keypad pro-
tection.
8
D
.
more than
Page 9
3000Cla-IM1-2-en.bk Seite 9 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Registering the handset
You must register your handset at the base station before
you can start to make calls.
Step 1
• First prepare the
Gigaset Base station preparation
3010/pocket
3015
3020, 3025
3030, 3035
ISDN
models
100 0/200 0
models
Step 2
• You now have
handset
:
z { ~ Press the keys shown.
¸b Enter the base station number, e.g.
Syst em PIN
e.g. s Enter the desired call number – the
Siemens base station
Hold down the coloured base station key for
approx. 10 seconds
tones
.
In the base station menu select registration
option and confirm.
Press the display (LED) –
flashing during registration.
As for relevant successor model.
one minute
tion 1-4) and confirm.
b Enter the base station’s system PIN and con-
firm (factory setting: 0000) – the unassigned
call numbers appear after a few seconds.
nary
base icon
Your handset is ready for operation!
to enter the following at the
is displayed.
for registration:
until you hear signal
05.01.00
(sta-
¸
statio-
– Please refer to the relevant operating instructions (step 1)
to register at
– You can register your Gigaset 3000 Classic handset at
up to 4 different base stations
non-Siemens base stations
, see above.
.
9
Page 10
3000Cla-IM1-2-en.bk Seite 10 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Making calls
Making an external call
P Enter the call number.
D
– You can
.
– You can insert a
down).
– You can opt to
account: press the keys
terwards are
Making an internal call
{ Press the INT key – the actual internal call
P Enter the internal call number.
If necessary, correct it with the delete key
.
|
Press the talk key to start the dial operation.
Ending a call:
Press the end call key
cancel the dial operation
pause
not save entries
not
saved for number redial.
number is displayed.
Press
Ending a call:
Press the end call key
with the recall key
, e.g. when checking an
, all characters entered af-
z ~
to call all handsets.
~
.
with the end call key
4
.
(hold it
05.01.00
Answering a call
D Press the talk key.
or
remove the handset from the base station/
L
10
charging unit if the auto talk feature is activated.
Page 11
3000Cla-IM1-2-en.bk Seite 11 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Transferring a call, enquiry call
Siemens base stations
call to another handset or to conduct an internal enquiry call.
{ Press the INT key.
P Dial the internal call number.
When the user answers:
transfer the call:
•
enquiry call:
•
ler on hold.
press the recall key 4 to revert to the cal-
allow you to transfer an external
press the end call key
.
Redial
Redialling a number
You can access the last five call numbers dialled.
1 Display call numbers.
a Select a call number.
D Press the talk key to start the redial opera-
If necessary, confirm the number with
and correct it with the delete key
tion.
|
.
05.01.00
b
Deleting redial numbers
All five redial numbers
z
¸ y b Initiate the setting.
Te l . PIN
b Enter the telephone PIN and confirm
s b Delete the redial list.
Press the set key.
(factory setting: 0000).
are deleted.
11
Page 12
3000Cla-IM1-2-en.bk Seite 12 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Speed dialling
The speed dialling function allows you to dial up to
numbers
at the push of a button.
Saving/changing/deleting call numbers
z - Press the set key followed by the speed dial
e.g. ¸ Enter the speed dial number (memory loca-
b Confirm the number.
P Enter a new call number or delete/change an
b Save the number.
key.
tion, digit 0 to 9) or press
existing call number with
a
|
Speed dialling
- Display the call numbers.
e.g. ¸ Enter the speed dial number (0 to 9) or
D Press the talk key to start the dial operation.
press
If necessary, confirm the number with
and dial further digits for the extension number.
to scroll.
a
10 call
to scroll.
.
05.01.00
b
Saving a call number from the redial list
z - Press the set key followed by the speed dial
e.g. ·b Enter the speed dial number (digit 0 to 9) or
a Select the call number (scroll) – the other
b Save the call number.
12
key.
press
redial numbers are displayed.
to scroll and confirm.
a
Page 13
3000Cla-IM1-2-en.bk Seite 13 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Deleting the speed dial list
All
call numbers saved are deleted!
z
¸ y b
Te l . PIN
¸ b
Press the set key.
Activate the function.
b
Enter the telephone PIN and confirm
(factory setting: 0000).
Delete the speed dial list.
Call-by-call support
• Using the speed dial key
Hold down the speed dial key
phone company’s call number saved as speed dial number "0".
-
PD Enter the user’s call number and press the
• By "linking" the speed dial list
You can save a
phone companies
-ab Display the prefix code and confirm.
e.g.
-ab
D Press the talk key to dial the complete num-
Hold down
code is displayed.
talk key to dial the "complete" number.
number of prefix codes
Display the user’s call number in the speed
dial list and confirm or enter it manually.
ber.
the speed dial key – the prefix
as speed dial numbers
to display the tele-
-
for various tele-
:
05.01.00
13
Page 14
3000Cla-IM1-2-en.bk Seite 14 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Security
Changing the telephone PIN
Important functions/settings are protected by the handset’s
telephone PIN (Personal Identification Number).
Do not forget your telephone PIN!
reset by calling the
z
¸ s b Activate the function.
Te l . PIN
b Enter the current telephone PIN and
2x new
tel. PIN
b Save the new telephone PIN.
Siemens hotline
Press the set key.
confirm (factory setting: 0000).
Enter the new telephone PIN (4 digits)
twice
.
Activating direct station selection
This function is not available in all countries!
When direct station selection (DSS) is active,
stroke
triggers a call to the DSS number
function is used to call for help or raise an alarm.
The PIN can only be
, see back cover.
every key-
saved
. This
05.01.00
Saving/changing/deleting a DSS number:
z
¸ ¸
Te l . PIN
b Enter the telephone PIN and confirm
s
b Press the keys shown.
P
b Save the DSS number – direct station selec-
The telephone lock is activated if you press b when the _
(empty) icon is displayed.
14
Press the set key.
b Select the function.
(factory settings: 0000).
Enter or change the DSS number or press
to delete it.
|
tion is activated.
Page 15
3000Cla-IM1-2-en.bk Seite 15 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Activating the handset lock
All functions with the exception of emergency call are unavailable when the telephone is locked. You can still be reached, however. Simply press the talk key
call.
z
¸ ¸ b
Te l . PIN
¸ b
You can dial all
Press the set key.
Select the function.
b
Enter the telephone PIN and confirm
(factory setting: 0000).
Activate the telephone lock.
base station emergency numbers
D
to accept a
Deactivating the handset lock/direct station
selection
z
¸ ¸
Te l . PIN
¨
b
Press the set key.
bActivate the function.
b
Enter the telephone PIN and confirm
(factory setting: 0000).
Deactivate direct station selection/telephone
lock.
05.01.00
.
15
Page 16
3000Cla-IM1-2-en.bk Seite 16 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Settings
Ringer volume
You can choose between 5 volumes and the "crescendo"
ring (increasing volume).
z v Activate the function – you will hear the rin-
e.g. u Change the ringer volume (level 1 to 5,
b Save the setting.
Ring tones
You can choose between 10 ring tones.
z
e.g. · Select the ring tones (0 to 9).
b Save the setting.
Handset volume
You can set the handset volume to any of 3 levels (even
during a call).
z
¸ ¨
e.g. s Change the volume (
b Save the setting.
b Activate the function.
v
ger.
crescendo = 6).
Activate the function – you will hear the ringer.
Press the set key.
1, 2 or 3
).
05.01.00
16
Page 17
3000Cla-IM1-2-en.bk Seite 17 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Activating/deactivating beeps
Confirmation beeps
•
– Confirmation beep (1 beep) when you conclude a
function and replace the unit in the charging unit
– Error beep (4 short beeps) when you make an incorrect
entry
Key beep
•
– function code
– every keystroke is confirmed
Battery warning beep
•
– when the battery is empty
z
e.g.
¸ ub
¨
e.g.
b
– function code 13 (both beeps)
14
– function code
15
Press the set key.
For example, enter function code 14 and
confirm.
For example, deactivate the key beep.
Deactivate = 0; activate =
You can also activate the
beep
for call status only = enter
1
battery warning
Save the entry.
s
05.01.00
.
Activating/deactivating base station display
The current base station is displayed when the handset is
idle.
z
¸ b
¸
e.g.
b
Press the set key.
Activate the function.
For example, activate the display.
Activate = 1; deactivate =
0
Save the setting.
17
Page 18
3000Cla-IM1-2-en.bk Seite 18 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Activating/deactivating auto talk
When this function is active, you can answer a call by removing the handset from the base station or charging unit.
z
¸ x b
¨
e.g.
b
Press the set key.
Activate the function.
¨
deactivate
¸
to
activate
to
Enter
Enter
Save the setting.
auto talk.
auto talk.
Resetting the factory settings
This setting does
not
delete the
tion registrations are maintained.
Factor settings:
Speed dial numbers, redial, DSS number deleted
Handset volume, ringer melody 1
Ringer volume 5
Key beep, battery warning beep, confirmation beeps, auto talk
Base station display off
telephone PIN
. Base sta-
on
05.01.00
z
¸ y b
b
Te l . PIN
¨ b
18
Press the set key.
Activate the function.
Enter the telephone PIN and confirm
(factory default: 0000).
Reset settings to factory default.
Page 19
3000Cla-IM1-2-en.bk Seite 19 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Changing the base station
Prerequisite:
base station.
You can choose one of the following settings:
• Set the handset to
the best base (factory setting).
• Set the handset to
searches for other base stations if this is not found within
30 seconds.
• Set the handset to
z { Press the set key followed by the INT key.
e.g. ¸¸ For example, set base 1 as the priority base.
b Save the setting and terminate the function.
the handset is registered with more than one
automatically select
priority base station
a fixed base station
automatic selection:
For
priority base:
For
twice
.
fixed base:
For
once
.
enter the base number
enter the base number
(factory setting)
– the handset
.
¨
.
enter
Switching to tone dialling
If you are operating the base station in a telephone system
that uses pulse dialling (DP), you can switch to tone dialling
(DTMF), e.g. for telephone banking, to check an external
answering machine, etc.
Prerequisite:
z Press the set key.
~ Activate tone dialling – tone dialling is active
a connection is active.
until the call is cleared down.
05.01.00
19
Page 20
3000Cla-IM1-2-en.bk Seite 20 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
3000Cla.fm
Appendix
Range
The range is approximately 300 metres outdoors and up to
50 metres indoors. The base icon
outside this range.
Guarantee/service
Siemens AG offers a six-month guarantee for this device
from the date of purchase from the dealer. Within this
period, Siemens AG will rectify all material or manufacturing
defects by repairing or replacing the defective terminal.
The guarantee shall not cover damage caused by improper
use, wear and tear or third party access. The guarantee shall
not cover consumables or defects which only slightly
decrease the value or serviceability of the device.
Service telephone number
Siemens Service should only be contacted if problems arise
with the unit. Your specialist dealer will be happy to answer
any questions on unit operation. Contact your network provider for questions concerning telephone connections.
flashes when you move
(see back cover).
05.01.00
Approval
The Gigaset 3000 Classic has received approval for operation throughout the EU.
20
Loading...