Built-in oven
HB673G0.1A
siemens-home.com/welcome
en ,QVWUXFWLRQPDQXDO
Register
your
product
online
en
Table of contents
enInstruction manual
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
F Sabbath mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Starting Sabbath mode. . . . . . . . . . . . . . . . . . . . . . . .16
( Important safety information . . . . . . . . . . . . . . . 4
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Halogen lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cleaning function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. Cleaning function. . . . . . . . . . . . . . . . . . . . . . . . 16
Prior to initiating the cleaning function . . . . . . . . . . . .16
Setting the self-cleaning function . . . . . . . . . . . . . . . .17
Once the cleaning function has ended . . . . . . . . . . . .17
] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 6
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7 Environmental protection . . . . . . . . . . . . . . . . . . 6
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Environmentally-friendly disposal . . . . . . . . . . . . . . . . . 6
D Cleaning agent . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Suitable cleaning agents . . . . . . . . . . . . . . . . . . . . . .17
Keeping the appliance clean . . . . . . . . . . . . . . . . . . .18
p Rails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Detaching and refitting the rails . . . . . . . . . . . . . . . . .19
* Getting to know your appliance . . . . . . . . . . . . . 7
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operating modes menu . . . . . . . . . . . . . . . . . . . . . . . . 8
Types of heating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cooking compartment functions . . . . . . . . . . . . . . . . . 9
_ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Accessories included . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Inserting accessories . . . . . . . . . . . . . . . . . . . . . . . . . 10
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . 11
q Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Removing and fitting the appliance door . . . . . . . . . .19
Removing the door cover . . . . . . . . . . . . . . . . . . . . . .20
Removing and installing the door panels . . . . . . . . . .20
3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 22
Fault table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Maximum operating time exceeded . . . . . . . . . . . . . .22
Replacing the bulb in the top of the cooking
compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Glass cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
4 Customer service . . . . . . . . . . . . . . . . . . . . . . . . 23
K Before using for the first time. . . . . . . . . . . . . . 11
Initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the cooking compartment and accessories 11
1 Operating the appliance . . . . . . . . . . . . . . . . . . 12
Switching the appliance on and off . . . . . . . . . . . . . . 12
Starting or interrupting operation . . . . . . . . . . . . . . . . 12
Selecting an operating mode . . . . . . . . . . . . . . . . . . . 12
Setting the type of heating and temperature . . . . . . . 12
Rapid heat up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
O Time-setting options . . . . . . . . . . . . . . . . . . . . . 13
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cooking time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
End time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E number and FD number . . . . . . . . . . . . . . . . . . . . .23
P Dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Information about the programs . . . . . . . . . . . . . . . . .24
Selecting and setting food . . . . . . . . . . . . . . . . . . . . .24
Produktinfo
Additional information on products, accessories,
replacement parts and services can be found at
www.siemens-home.com and in the online shop
www.siemens-eshop.com
A Childproof lock. . . . . . . . . . . . . . . . . . . . . . . . . . 15
Activating and deactivating . . . . . . . . . . . . . . . . . . . . 15
The appliance door is locked. . . . . . . . . . . . . . . . . . . 15
Q Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
List of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the time . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3
en Intended use
8Intended use
Intended use
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for future
use or for subsequent owners.
This appliance is only intended to be fully fitted
in a kitchen. Observe the special installation
instructions.
Check the appliance for damage after
unpacking it. Do not connect the appliance if it
has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused by
incorrect connection is not covered under
warranty.
This appliance is intended for domestic use
only. The appliance must only be used for the
preparation of food and drink. The appliance
must be supervised during operation. Only
use this appliance indoors.
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 8 years old and are
being supervised.
Keep children below the age of 8 years old at
a safe distance from the appliance and power
cable.
Always slide accessories into the cooking
compartment the right way round.
~ "Accessories" on page 9
(Important safety
information
Important safety information
General information
:Warning
Risk of fire!
■ Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off the
appliance and unplug it from the mains or
switch off the circuit breaker in the fuse box.
Risk of fire!
■ A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating element
and catch fire. Do not place greaseproof
paper loosely over accessories during
preheating. Always weight down the
greaseproof paper with a dish or a baking
tin. Only cover the surface required with
greaseproof paper. Greaseproof paper
must not protrude over the accessories.
:Warning
Risk of burns!
■ The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of serious burns!
■ Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
■ Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with care.
:Warning
Risk of scalding!
■ The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
■ When you open the appliance door, hot
steam can escape. Steam may not be
visible, depending on its temperature. When
opening, do not stand too close to the
appliance. Open the appliance door
carefully. Keep children away.
Risk of scalding!
4
Important safety information en
■ Water in a hot cooking compartment may
create hot steam. Never pour water into the
hot cooking compartment.
:Warning
Risk of injury!
■ Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
Risk of injury!
■ The hinges on the appliance door move
when opening and closing the door, and
you may be trapped. Keep your hands away
from the hinges.
:Warning
Risk of electric shock!
■ Incorrect repairs are dangerous. Repairs
may only be carried out and damaged
power cables replaced by one of our
trained after-sales technicians. If the
appliance is defective, unplug the appliance
from the mains or switch off the circuit
breaker in the fuse box. Contact the aftersales service.
Risk of electric shock and serious injury!
■ The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact with
hot parts of the appliance.
Risk of electric shock!
■ Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk of electric shock!
■ A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
:Warning
Hazard due to magnetism!
Permanent magnets are used in the control
panel or in the control elements. They may
affect electronic implants, e.g. heart
pacemakers or insulin pumps. Wearers of
electronic implants must stay at least 10 cm
away from the control panel.
the mains or switch off the circuit breaker in
the fuse box.
Cleaning function
:Warning
Risk of fire!
■ Loose food residues, grease and meat
juices may catch fire during the cleaning
function. Before starting the cleaning
function, remove coarse dirt from the
cooking compartment and from the
accessories.
Risk of fire!
■ The appliance will become very hot on the
outside during the cleaning function. Never
hang combustible objects, e.g. tea towels,
on the door handle. Do not place anything
against the front of the appliance. Keep
children away from the appliance.
:Warning
Risk of serious damage to health!
The appliance will become very hot during the
cleaning function. The non-stick coating on
baking trays and tins is destroyed and noxious
gases are released. Never clean non-stick
baking trays and baking tins using the
cleaning function. Only clean enamelled
accessories using the cleaning function.
:Warning
Risk of burns!
■ The cooking compartment becomes
extremely hot during the cleaning function.
Never open the appliance door or move the
locking latch by hand. Allow the appliance
to cool down. Keep children away from the
appliance.
Risk of burns!
■ ; The appliance will become very hot on
the outside during the cleaning function.
Never touch the appliance door. Allow the
appliance to cool down. Keep children
away from the appliance.
Halogen lamp
:Warning
Risk of electric shock!
When replacing the cooking compartment
bulb, the bulb socket contacts are live. Before
replacing the bulb, unplug the appliance from
5
en Causes of damage
]Causes of damage
Causes of damage
General information
Caution!
■ Accessories, foil, greaseproof paper or ovenware on
the cooking compartment floor: do not place
accessories on the cooking compartment floor. Do
not cover the cooking compartment floor with any
sort of foil or greaseproof paper. Do not place
ovenware on the cooking compartment floor if a
temperature of over 50 ºC has been set. This will
cause heat to accumulate. The baking and roasting
times will no longer be correct and the enamel will
be damaged.
■ Aluminium foil: Aluminium foil in the cooking
compartment must not come into contact with the
door glass. This could cause permanent
discolouration of the door glass.
■ Water in a hot cooking compartment: do not pour
water into the cooking compartment when it is hot.
This will cause steam. The temperature change can
cause damage to the enamel.
■ Moisture in the cooking compartment: Over an
extended period of time, moisture in the cooking
compartment may lead to corrosion. Allow the
cooking compartment to dry after use. Do not keep
moist food in the closed cooking compartment for
extended periods of time. Do not store food in the
cooking compartment.
■ Cooling with the appliance door open: Following
operation at high temperatures, only allow the
cooking compartment to cool down with the door
closed. Do not trap anything in the appliance door.
Even if the door is only left open a crack, the front of
nearby furniture may become damaged over time.
Only leave the cooking compartment to dry with the
door open if a lot of moisture was produced whilst
the oven was operating.
■ Fruit juice: when baking particularly juicy fruit pies,
do not pack the baking tray too generously. Fruit
juice dripping from the baking tray leaves stains that
cannot be removed. If possible, use the deeper
universal pan.
■ Extremely dirty seal: If the seal is very dirty, the
appliance door will no longer close properly during
operation. The fronts of adjacent units could be
damaged. Always keep the seal clean.
■ Appliance door as a seat, shelf or worktop: Do not
sit on the appliance door, or place or hang anything
on it. Do not place any cookware or accessories on
the appliance door.
■ Inserting accessories: depending on the appliance
model, accessories can scratch the door panel
when closing the appliance door. Always insert the
accessories into the cooking compartment as far as
they will go.
■ Carrying the appliance: do not carry or hold the
appliance by the door handle. The door handle
cannot support the weight of the appliance and
could break.
7Environmental protection
Environmental protection
Your new appliance is particularly energy-efficient. Here
you can find tips on how to save even more energy
when using the appliance, and how to dispose of your
appliance properly.
Saving energy
■ Only preheat the appliance if this is specified in the
recipe or in the tables in the operating instructions.
■ Use dark, black lacquered or enamelled baking tins.
They absorb heat particularly well.
■ Open the appliance door as infrequently as possible
during operation.
■ It is best to bake several cakes one after the other.
The cooking compartment is still warm. This reduces
the baking time for the second cake. You can place
two cake tins next to each other in the cooking
compartment.
■ For longer cooking times, you can switch the
appliance off 10 minutes before the end of the
cooking time and use the residual heat to finish
cooking.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
6
Getting to know your appliance en
*Getting to know your
appliance
Getting to know your appliance
In this chapter, we will explain the displays and controls.
You will also find out about the various functions of your
appliance.
'KRWDLU
0O0GG
NFOV
Note: Depending on the appliance model, individual
details and colours may differ.
Control panel
In the control panel, you can use the various buttons,
touch fields and the rotary selector to set the required
function of the appliance. The current settings are
shown in the display.
##
&
4UBSU4UPQ
Buttons
(
The buttons to the left and right of the rotary
selector have a pressure point. Press these
buttons to activate them.
Rotary selector
0
You can turn the rotary selector clockwise and
anti-clockwise.
Display
8
You can see the current adjustment values,
options or notes in the display.
Touch fields
@
There are sensors under the touch fields to the left
¾ and right ¿ of the display. Touch the respective
arrow to select the function.
Controls
The individual controls are adapted for the various
functions of your appliance. You can set your appliance
simply and directly.
Buttons and touch fields
Here you can find a short explanation of the various
buttons and touch fields.
Buttons Meaning
on/off Switches the appliance on and off
menu Menu Opens the operating modes menu
l/
0
Information
Childproof lock
Time-setting
options
Displays notes
Activates/deactivates the child-
proof lock
Opens the time-setting options
menu
c
Start/Stop Starts, pauses or cancels opera-
Touch fields
¾
¿
--------
Rotary selector
Use the rotary selector to change the operating modes
and adjustment values shown in the display.
In most selection lists, e.g. types of heating, the first
selection follows the last. For temperature for example,
you must turn the rotary selector back when the
minimum or maximum temperature is reached.
Rapid heat up Switches rapid heat up on and off
tion
Field to the left of
the display
Field to the right of
the display
Navigates left
Navigates right
Display
The display is structured so that the information can be
read at a glance.
The value that you can currently set is in focus. It is
displayed in white lettering with a dark background.
Status bar
The status bar is at the top of the display. The time and
set time functions are displayed here.
7
en Getting to know your appliance
Progress line
The progress line is under the status bar. The progress
line shows you how much time has elapsed, for
example. The line over the in-focus value progresses
from left to right, the longer the operation continues to
run.
The colour of the progress line changes depending on
the operating mode.
Lapse of time
If you have started your appliance without a cooking
time, you can see how long the operation has already
been running for at the top on the right in the status bar.
Temperature check
The temperature indicator bars show the heating
phases in the cooking compartment.
Heating indicator The heating indicator displays the rising tempera-
ture in the cooking compartment. When all bars
are complete, the optimum time for placing the
dish in the oven has been reached.
The bars do not appear when settings are applied
for grilling and cleaning.
Residual heat
indicator
When the appliance is switched off, a line appears
under the status bar which shows how much
residual heat is in the cooking compartment.
Once the temperature has dropped to approximately 60 °C, the display goes out.
Note: Due to thermal inertia, the temperature displayed
may be slightly different to the actual temperature inside
the oven. You can use the
current heating temperature when heating up.
² button to check the
Operating modes menu
The menu is divided into different operating modes. In
this way, you can quickly access the required function.
Operating mode Use
Types of heating There are several finely tuned
types of heating for you to prepare your dishes.
Dishes ~ "Dishes" on page 24 Here you can find prepro-
grammed setting values which
are suitable for many dishes.
Self-cleaning ~ "Cleaning
function" on page 16
Settings ~ "Basic settings"
on page 15
--------
The self-cleaning function cleans
your oven automatically.
You can adapt your appliance's
basic settings to suit your needs.
Types of heating
In order for you to find the correct type of heating for
your dish, we have explained the differences and
scopes of application here.
Types of heating Temperature Use
:
%
‘
+
4
(
*
4D hot air 30-275 °C For baking and roasting on one or more levels.
The fan distributes the heat from the ring heating element in the back panel
evenly around the cooking compartment.
Top/bottom heating 30-300 °C For traditional baking and roasting on one level. Especially suitable for cakes with
moist toppings.
Heat is emitted evenly from above and below.
Hot air eco 30-275 °C For energy-optimised cooking of selected dishes on one level without preheating.
The fan distributes the energy-optimised heat from the ring heating element in the
back wall evenly around the cooking compartment.
Top/bottom heating eco 30-300 °C For energy-optimised cooking of selected dishes.
Heat is emitted evenly from above and below.
Hot air grilling 30-300 °C For roasting poultry, whole fish and larger pieces of meat.
The grill heating element and the fan switch on and off alternately. The fan circulates the hot air around the food.
Grill, large area Grill settings:
1 = low
2 = medium
3 = high
Grill, small area Grill settings:
1 = low
2 = medium
3 = high
For grilling flat items such as steaks, sausages or bread, and for browning food.
The whole area of the grill heating element becomes hot.
For grilling small quantities of food such as steaks, sausages or bread, and for
browning food.
The centre part under the grill heating element becomes hot.
8
Accessories en
;
$
,
--------
Default values
For each type of heating, the appliance specifies a
default temperature or level. You can accept this value
or change it in the appropriate area.
Pizza setting 30-275 °C For preparing pizza and dishes which require a lot of heat from underneath.
The bottom heating element and the ring heating element in the back panel heat
up.
Bottom heating 30-250 °C For cooking in a bain marie and for the final baking stage.
The heat is emitted from below.
CoolStart function 30-275 °C For the quick preparation of frozen products on level 3. The temperature depends
on the manufacturer's instructions. Use the highest temperature specified on the
packaging. The cooking time is as specified or shorter. Preheating is not required.
Further information
In most cases, the appliance provides notes and further
information on the action just carried out. To do this,
press the l button. The note is shown for a few
seconds.
Some notes are displayed automatically, for example as
confirmation, or to provide an instruction or warning.
Cooking compartment functions
Some functions make your appliance easier to use.
This, for example, enables the cooking compartment to
be well lit and a cooling fan to prevent the appliance
from overheating.
Opening the appliance door
If you open the appliance door during an operation, the
operation is paused. Operation continues to run when
you close the door.
Interior lighting
When you open the appliance door, the interior lighting
switches on. If the door remains open for longer than
15 minutes, the lighting switches off again.
For most operating modes, the interior lighting switches
on as soon as the operation is started. When the
operation has finished, the lighting switches off.
_Accessories
Accessories
Your appliance is accompanied by a range of
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.
Accessories included
Your appliance is equipped with the following
accessories:
Wire rack
For ovenware, cake tins and ovenproof
dishes.
For roasts and grilled food.
Universal pan
For moist cakes, pastries, frozen meals
and large roasts.
It can be used to catch dripping fat when
you are grilling directly on the wire rack.
Baking tray
For tray bakes and small baked products.
--------
Only use original accessories. They are specially
adapted for your appliance.
You can buy accessories from the after-sales service,
from specialist retailers or online.
Note: You can set the interior lighting not to come on
during the operation in the basic settings.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes above the door.
Caution!
Do not cover the ventilation slots. Otherwise the oven
will overheat.
So that the cooking compartment cools down more
quickly after operation, the cooling fan continues to run
for a certain period afterwards.
Note: You can change how long the cooling fan
continues to run for in the basic settings. ~ "Basic
settings" on page 15
Note: The accessories may deform when they become
hot. This does not affect their function. Once they have
cooled down again, they regain their original shape.
9
en Accessories
Inserting accessories
The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
When using shelf positions 1, 3, 4 and 5, always insert
the accessory between the two guide rods for a shelf
position.
The accessories can be pulled out approximately
halfway without tipping. With the pull-out rails at level 2,
you can pull the accessories out further.
Ensure that the accessory is placed behind the lug ‚ on
the pull-out rail.
Example in the picture: Universal pan
D
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that lug ‚ is at the
rear and is facing downwards. The open side must be
facing the appliance door and the outer rail must be
facing downwards ¾.
D
D
When inserting baking trays, ensure that lug ‚ is at the
rear and is facing downwards. The sloping edge of the
accessory ƒ must be facing towards the appliance
door.
Example in the picture: Universal pan
The pull-out rails lock in place when they are fully pulled
out. This makes it easy to place the accessories in
position.To unlock, push the pull-out rails back into the
cooking compartment with a certain amount of force.
Notes
■ Ensure that you always insert the accessories into
the cooking compartment the right way round.
■ Always insert the accessories fully into the cooking
compartment so that they do not touch the appliance
door.
D
D
E
Combining accessories
You can insert the wire rack and the universal pan at
the same time to catch drops of liquid.
When inserting the wire rack, ensure that both spacers
‚ are at the rear edge. When inserting the universal
pan, the wire rack is on top of the upper guide rod of
the shelf position.
Example in the picture: Universal pan
D
D
D
10
Before using for the first time en
Optional accessories
You can buy optional accessories from the after-sales
service, from specialist retailers or online. *You will find
a comprehensive range of products for your appliance
in our brochures and online.
Both availability and whether it is possible to order
online differ between countries. Please see your sales
brochures for more details.
When purchasing, please always quote the exact order
number of the optional accessory.
Note: Not all optional accessories are suitable for every
appliance. When purchasing, please always quote the
exact identification number (E-no.) of your appliance.
~ "Customer service" on page 23
Optional accessories Order number
Wire rack
For ovenware, cake tins and ovenproof dishes,
and for roasts and grilled food.
Universal pan
For moist cakes, pastries, frozen meals and large
roasts.
It can be used to catch dripping fat when you are
grilling directly on the wire rack.
Baking tray
For tray bakes and small baked products.
Wire insert
For meat, poultry and fish.
For inserting into the universal pan to catch drip-
ping fat and meat juices.
Profi pan
For preparing large quantities.
Lid for the Profi pan
The lid turns the Profi pan into a Profi roasting
dish.
Pizza tray
For pizzas and large round cakes.
Grill tray
Use for grilling in place of the wire rack or as a
splatter guard.Only use in the universal pan.
Bread-baking stone
For home-made bread, bread rolls and pizzas that
require a crispy base.
The baking stone must be preheated to the recommended temperature.
Glass roasting dish (5.1 litres)
For stews and bakes.
Particularly suitable for the "Meals" operating
mode.
Glass tray
For large roasts, moist cakes and bakes.
Pull-out system, 1 level
The pull-out rails at level 2 allow you to pull the
accessories out further without them tipping.
HZ634070
HZ632070
Self-cleaning
HZ631070
Self-cleaning
HZ324001
HZ633070
HZ633001
HZ317000
HZ625071
Self-cleaning
HZ327000
Self-cleaning
HZ915001
HZ86S000
HZ638170
Self-cleaning
Pull-out system, 2 levels
The pull-out rails at levels 2 and 3 allow you to pull
the accessories out further without them tipping.
Pull-out system, 3 levels
The pull-out rails at levels 1, 2 and 3 allow you to
pull the accessories out further without them tipping.
--------
HZ638270
Self-cleaning
HZ638370
Self-cleaning
KBefore using for the first
time
Before using for the first time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
Note: You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 15
Setting the language
"German" is the preset language.
1. Use the rotary selector to select the required
language.
2. Touch the ¿ arrow.
The next setting appears.
Setting the time
The time starts at "12:00".
1. Turn the rotary selector to set the current time.
2. Touch the ¿ arrow
Setting the date
The default date is "1.1.2014".
1. Use the rotary selector to set the current day, month
and year.
2. Touch the ¿ arrow to confirm.
A note appears in the display confirming that the
initial use has been completed.
Cleaning the cooking compartment and accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when empty and with the oven
door closed.
11
en Operating the appliance
Make sure that the cooking compartment does not
contain any leftover packaging, such as polystyrene
pellets. Before heating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft, wet
cloth. Keep the kitchen ventilated while the appliance is
heating.
Apply the settings indicated.
Settings
Type of heating
Temperature 240 °C
Cooking time 1 hour
You can find out how to set the type of heating and the
temperature in the next section.
Switch off the appliance after the cooking time indicated
using the On/Off button.
After the cooking compartment has cooled down, clean
the smooth surfaces with soapy water and a dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
Top/bottom heating %
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note: You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Tip: In the basic settings, you can apply a setting so
that operation is not continued after the cooking
compartment door is closed. To continue operation, you
must then press the Start/Stop button. ~ "Basic
settings" on page 15
1Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the On/Off button to switch the appliance on.
The on/off symbol above the button is illuminated in
blue.
The Siemens logo appears in the display, and then a
type of heating and a temperature.
Note: You can specify which operating modes should
appear after the appliance is switched on in the basic
settings.
Selecting an operating mode
If you want to set an operating mode, the appliance
must be switched on.
1. Press the menu button.
The operating modes menu opens.
2. Use the rotary selector to select the required
operating mode.
Depending on the operating mode, different options
are available.
3. Use the ¿ arrow to reach the required operating
mode.
4. Use the rotary selector to change the selection.
Depending on the option, change different settings.
5. Press the Start/Stop button to start.
Setting the type of heating and temperature
After the appliance is switched on, the suggested type
of heating appears with the temperature. You can start
this setting immediately with the Start/Stop button.
For other settings, you can change the values as shown
in the pictures.
Example: Top/bottom heating, 180 °C
1. Use the rotary selector to change the type of
heating.
7RS
ERWWRPKHDWLQJ
&
12
Time-setting options en
2. Press the arrow ¿ to switch to the temperature.
3. Use the rotary selector to change the temperature.
7RS
4. Press the Start/Stop button.
ERWWRPKHDWLQJ
&
PLQV
7RS
&
The set type of heating and the temperature are
displayed in the display.
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
:
%
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heat up function cannot be started.
1. Set the type of heating and temperature.
2. Press the c button.
ERWWRPKHDWLQJ
4D hot air
Top/bottom heating
■ You can use the l button to check the current
cooking compartment temperature during rapid heat
up.
Cancelling
Press the c button. The c symbol disappears from
the display.
OTime-setting options
Time-setting options
Your appliance has different time-setting options.
Time-setting option Use
Timer The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End Set a cooking time and an end time. The
*
appliance switches on automatically so
that the operation ends at the desired
time.
Notes
■ A cooking time of up to one hour can be set exactly
to the minute.
A cooking time of over one hour can be set in 5minute increments.
■ Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
■ The maximum setting you can apply is 23 hours and
59 minutes.
■ After a time-setting option has elapsed, a signal
sounds.
■ Using the l button, you can request information
during operation, which then appears briefly in the
display.
PLQV
7RS
ꑛ
The c symbol appears on the left next to the
temperature. The progress line begins to move across.
When rapid heat up is complete, a signal sounds. The
c symbol goes out. Place your dish in the cooking
compartment.
Notes
■ If you change the type of heating or the temperature
the rapid heat up function is cancelled.
■ If a cooking time has been set, this runs
independently of the rapid heat up process and
counts down immediately when operation is started.
ERWWRPKHDWLQJ
&
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate signal. In this way, you can tell
whether it is the timer or a cooking time which has
elapsed.
1. Press the 0 button.
The field for the timer opens.
2. Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed,
a signal sounds. "U 00:00" is shown in the display. Use
the 0 button to cancel the audible signal early.
13
en Time-setting options
Cancelling the timer duration
Press the
menu and turn the time back. Press the 0button to
close the menu.
Changing the timer duration
Use the 0 button to open the time-setting options
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the 0 button.
0 button to open the time-setting options
Cooking time
If you set the cooking time for your food, operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
1. Press the 0 button.
The time-setting options menu opens.
End time
If you change the end time to a later time, please
remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu 0 is open.
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
1. Touch the ¿ arrow to continue to "y End".
2. Set the end time using the rotary selector.
ꑗ(QG
3. Confirm with the Start/Stop button.
ꑗ
ꑖ&RRNLQJWLPH
PLQV
2. Set the cooking time using the rotary selector.
ꑖ&RRNLQJWLPH
PLQV
3. Press the Start/Stop button to start.
You can see the cooking time xcounting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Cancelling the cooking time
Press the 0 button to open the time-setting options
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the 0 button to open the time-setting options
menu. Change the cooking time using the rotary
selector.
ꑘ
7LPHU
PLQV
ꑘ
7LPHU
PLQV
7RS
The oven is in standby. The ysymbol and the time
when operation will be finished appear in the status bar.
Operation starts at the appropriate time. You can see
the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Correcting the end time
This is possible if the oven is in standby. Press the
start/stop button. Use the 0 button to open the timesetting options menu, press the ¿ arrow to change to
"y End" and use the rotary selector to correct the end
time. Use the 0 button to close the time-setting options
menu.
Cancelling the end time
This is possible if the oven is in standby. Use the 0
button to open the time-setting options menu, press the
¿ arrow to change to "End" and use the rotary selector
to turn back the end time. The cooking time
immediately starts to count down.
ERWWRPKHDWLQJ
&
14
Childproof lock en
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the / button for approx. 4
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
The appliance door is locked
In the basic settings, you can change the settings so
that the appliance door is also locked in addition to the
control panel.
The appliance door locks if the temperature in the
cooking compartment reaches approx. 50 °C. The H
symbol is displayed in the status bar. When the oven is
switched off, the appliance door locks immediately if the
childproof lock has been activated.
QBasic settings
Basic settings
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
1. Press the "On/off" button.
2. Press the menu button.
The operating modes menu opens.
3. Use the rotary selector to select "Settings".
4. Touch the arrow ¿.
5. Use the rotary selector to change the values.
6. Use the arrow ¿ to change to the next settings, and
change them if necessary.
7. Press the menu button to save.
"Save" or "Discard" appears on the display.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
Audible signal duration Short (30 s)
Medium (1 m)
Long (5 m)
Button tone Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
Display brightness Can be adjusted to one of five different
levels
Clock display Digital
Off
Lighting On during operation
Off during operation
Childproof lock Door lock + button lock
Button lock only
Night-time dimming Switched off
Switched on (display dimmed between 10
p.m. and 5.59 a.m.)
Operation after switching onMain menu
Heating modes
Dishes*
Brand name logo Display
Do not display
Fan run-on time Recommended
Minimum
Sabbath mode Switched on
Switched off
Pull-out system Not retrofitted
Retrofitted
Factory settings Restore
Do not restore
*) Included, depending on appliance model
Caution!
For shelves and single rails: "Not retrofitted" setting.
For sets of two or three rails: "Retrofitted" setting.
Note: Changes to the language, button tone and
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------
Changing the time
You can change the time in the basic settings.
For example: Changing from summer to winter time.
1. Press the On/Off button.
2. Press the Menu button.
3. Use the rotary selector to select "Settings".
4. Touch the arrow ¿ to move to "Time of day".
5. Use the rotary selector to change the time.
6. Press the Menu button.
Save or Discard appears in the display.
15
en Sabbath mode
Power cut
Following a long power cut, the settings for initial use
are shown in the display.
Reset the language, time and date.
FSabbath mode
Sabbath mode
With the Sabbath mode, a cooking time of up to 74
hours can be set. You can keep the food in the cooking
compartment warm without having to switch the oven
on or off.
Starting Sabbath mode
Prerequisite: "Sabbath mode activated" is activated in
the basic settings. ~ "Basic settings" on page 15
The cooking compartment heats with top/bottom
heating and a temperature between 85 °C and 140 °C.
1. Press the on/off button.
A type of heating and a temperature are suggested
in the display.
2. Turn the rotary selector anti-clockwise and select the
"Sabbath mode" type of heating.
3. Tap the ¿ arrow and set the temperature using the
rotary selector.
4. Press the 0 button to open the time-setting options
menu.
25:00 hours are suggested.
5. Use the rotary selector to set the required cooking
time.
6. Press the start/stop button to start.
You can see the cooking time counting down in the
status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating.
.Cleaning function
Cleaning function
You can use the "Self-cleaning" operating mode to
clean the cooking compartment effortlessly. The
cooking compartment is heated up to a very high
temperature. Residues from roasting, grilling and
baking will burn.
You can choose from three cleaning settings.
Setting Cleaning level Duration
1 Light Approx. 1 hour, 15 minutes
2 Medium Approx. 1 hour, 30 minutes
3 Intensive Approx. 2 hours
The dirtier the cooking compartment and the longer the
dirt has been there, the higher the cleaning setting
should be. It is sufficient to clean the cooking
compartment every two to three months. If required, you
can clean the oven more frequently. Cleaning requires
approximately 2.5-4.7 kilowatt hours.
Note: For your safety, the cooking compartment door
locks automatically. It cannot be opened again until the
cooking compartment has cooled down and the H
symbol for the locking mechanism goes out in the
status bar. The interior lighting remains off during
cleaning.
:Warning
Risk of burns!
■ The cooking compartment becomes extremely hot
during the cleaning function. Never open the
appliance door or move the locking latch by hand.
Allow the appliance to cool down. Keep children
away from the appliance.
Risk of burns!
■ ; The appliance will become very hot on the
outside during the cleaning function. Never touch the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
Setting a later end time
It is not possible to set a later end time.
Cancelling Sabbath mode
Press the On/Off button. All settings are deleted. You
can apply new settings.
16
Prior to initiating the cleaning function
While cleaning is in progress, you can clean an
accessory at the same time, e.g. the universal pan or
the baking tray. Before cleaning is started, remove the
worst dirt. Slide the accessory in at level 2.
Clean the inside of the appliance door and along the
surface edges of the cooking compartment in the area
around the seal. Do not scrub the seal.
Note: When using the cleaning function, you can clean
the enamel accessory provided at the same time. You
cannot clean any of the wire racks when using the
cleaning function. The wire racks are not suitable for
cleaning using the cleaning function; this will discolour
them. Further accessories suitable for cleaning using
the cleaning function are listed in the table for special
accessories. ~ "Accessories" on page 9
Cleaning agent en
:Warning
Risk of fire!
■ Loose food residues, grease and meat juices may
catch fire during the cleaning function. Before
starting the cleaning function, remove coarse dirt
from the cooking compartment and from the
accessories.
Risk of fire!
■ The appliance will become very hot on the outside
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
:Warning
Risk of serious damage to health!
The appliance will become very hot during the cleaning
function. The non-stick coating on baking trays and tins
is destroyed and noxious gases are released. Never
clean non-stick baking trays and baking tins using the
cleaning function. Only clean enamelled accessories
using the cleaning function.
Setting the self-cleaning function
1. Press the menu button.
The operating modes menu opens.
2. Use the rotary selector to select "Self cleaning".
3. Touch the arrow ¿.
Cleaning setting 3 is suggested. You can start the
cleaning process immediately using the "Start/stop"
button or
4. select a different cleaning setting using the rotary
selector.
5. Press the "Start/stop" button.
Instructions for the cleaning operation appear on the
display.
6. Press the "Start/stop" button to start the cleaning
operation.
The cooking compartment door locks shortly after
operation starts. The H symbol for the locking
mechanism appears on the right-hand side of the status
bar next to the elapsing duration.
The cooking compartment door cannot be opened until
the H symbol goes out in the status bar.
Once the cleaning has finished
An audible signal sounds. The oven stops heating. Use
the 0 button to switch off the audible signal. "Appliance
cooling down" appears on the display.
Cancelling the cleaning operation
Use the "On/off" button to switch off the oven. The
cooking compartment door cannot be opened until the
H symbol goes out in the status bar.
You can set the cleaning to run overnight
In the section "Time settings", you can find out how to
delay the end time. This allows you to use the oven at
any time throughout the day. ~ "Time-setting options"
on page 13
Once the cleaning function has ended
Once the cooking compartment has cooled down, wipe
off the ash that has been left behind in the cooking
compartment, on the accessories and around the
appliance door with a damp cloth.
After cleaning, the rails may retain some discolouration.
This does not affect their function.
DCleaning agent
Cleaning agent
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Suitable cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Depending on the appliance
model, not all of the areas listed may be on/in your
appliance.
Caution!
Risk of surface damage
Do not use:
■ Harsh or abrasive cleaning agents,
■ Cleaning agents with a high alcohol content,
■ Hard scouring pads or cleaning sponges,
■ High-pressure cleaners or steam cleaners,
■ Special cleaners for cleaning the appliance while it is
hot.
Wash new sponge cloths thoroughly before use.
Tip: Highly recommended cleaning and care products
can be purchased through the after-sales service.
Observe the respective manufacturer's instructions.
:Warning
Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Adjusting the cleaning setting
Once cleaning starts, the cleaning setting can no longer
be changed.
17
en Cleaning agent
Area Cleaning
Appliance exterior
Stainless steel
front
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Plastic Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Painted surfaces Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Control panel Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door handle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.
Appliance exterior
Enamel surfaces Hot soapy water or a vinegar solution:
Clean with a dish cloth and then dry with a soft
cloth.
Soften baked-on food residues with a damp cloth
and soapy water. If there are heavy deposits of
dirt, use a stainless steel scouring pad or oven
cleaner.
Leave the cooking compartment open to dry after
cleaning.
It is best to use the cleaning function.
~ "Cleaning function" on page 16
Glass cover for
the interior lighting
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If the cooking compartment is heavily soiled, use
oven cleaner.
Stainless steel
door cover
Stainless steel cleaner:
Observe the manufacturer's instructions.
Do not use stainless steel care products.
Remove the door cover for cleaning.
Rails Hot soapy water:
Soak and clean with a dish cloth or brush.
Pull-out system Hot soapy water:
Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails
are pulled out – it is best to clean them when they
are pushed in. Do not clean in the dishwasher.
Accessories Hot soapy water:
Soak and clean with a dish cloth or brush.
If there are heavy deposits of dirt, use a stainless
steel scouring pad.
--------
Notes
■ Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■ Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
■ Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
Tips
■ Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■ Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■ Use the universal pan for baking very moist cakes.
■ Use suitable ovenware for roasting, e.g. a roasting
dish.
18
Rails en
pRails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
If your appliance has a self-cleaning function, the rails
can also be cleaned.
:Warning
Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
1. Lift the rail slightly at the front ‚ and detach it ƒ
(figure !).
2. Then pull the whole rail towards you and take it out
(figure ").
1
2
qAppliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
For cleaning purposes and to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (figure !), the
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (figure "), the hinges are locked. They
cannot snap shut.
1
2
D
E
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
Attaching the rails
The rails only fit on the right or the left side. The pull-out
rails must pull out towards you.
1. First, insert the rail in the middle of the rear socket ‚,
until the rail rests against the cooking compartment
wall, and push it back ƒ (figure !).
2. Then insert the rail into the front socket „, until the
rail also rests against the cooking compartment wall
here, and press it downwards … (figure ").
1
D
E
2
F
G
:Warning
Risk of injury!
■ If the hinges are not locked, they can snap shut with
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Removing the appliance door
1. Open the appliance door fully.
2. Fold open the two locking levers on the left and right
(figure !).
3. Close the appliance door as far as the limit stop ‚.
With both hands, grip the door on the left- and righthand side ƒ, and pull it out upwards (figure ").
1I
2
E
D
E
19
en Appliance door
Fitting the appliance door
Reattach the appliance door in the opposite sequence
to removal.
1. When attaching the appliance door, ensure that both
hinges are inserted straight into the opening (figure
!).
Place both hinges at the bottom on the outer panel
and use this as a guide.
Ensure that the hinges are inserted into the correct
opening. You must be able to insert them easily and
without resistance. If you can feel any resistance,
check that the hinges are inserted into the correct
opening.
1
2. Open the appliance door fully. Fold both locking
levers closed again (figure ").
2I
Note: Clean the stainless steel inlay in the cover with
stainless steel cleaner. Clean the rest of the door
cover with soapy water and a soft cloth.
4. Open the appliance door again slightly. Put the
cover back in place and press on it until it clicks
audibly into place (figure #).
5. Close the appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing the door from the appliance
1. Open the appliance door slightly.
2. Press on the right and left side of the cover (figure
!).
3. Remove the cover (figure ").
3. Close the cooking compartment door.
Removing the door cover
The stainless steel inlay in the door cover may become
discoloured. To carry out thorough cleaning, you can
remove the cover.
1. Open the appliance door slightly.
2. Press on the right and left side of the cover (figure
!).
3. Remove the cover (figure ").
Close the appliance door carefully.
1
2
21
4. Loosen and remove the screws on the left and right
of the appliance door (figure #).
5. Before closing the door again, trap a tea towel which
has been folded several times in the door (figure $).
Pull out the front panel upwards and lay it on a flat
surface with the door handle facing downwards.
20
Appliance door en
6. Push both retainers on the intermediate panel
upwards, but do not remove it (figure %). Hold the
panel with one hand. Remove the panel.
Clean the panels with glass cleaner and a soft cloth.
:Warning
Risk of injury!
■ Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting the door on the appliance
When fitting the intermediate panel, make sure that the
arrow is in the top right of the panel and that it aligns
with the arrow on the metal panel.
5. Press the front panel at the bottom until it clicks
audibly into place (figure %).
6. Open the appliance door again slightly and remove
the tea towel.
7. Screw both screws back in on the left and right.
8. Put the cover back in place and press on it until it
clicks audibly into place (figure &).
9. Close the appliance door.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
1. Insert the intermediate panel at the bottom into the
retainer and push it in firmly at the top (figure !).
2. Push both retainers downwards (figure ").
1
3. Insert the front panel at the bottom into the retainers
2
(figure #).
4. Close the front panel until both upper hooks are
opposite the opening (figure $).
21
en Trouble shooting
3 Trouble shooting
Trouble shooting
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Note: If a dish does not turn out as well as you had
hoped, refer to the table section at the end of the
instruction manual, where you will find plenty of tips and
information.
Fault table
:Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
If an error message beginning with 'E' is shown, e.g.
E0111, switch the appliance off and then on again. If
Fault Possible cause Information/remedial action
The appliance does not work The fuse is faulty Check in the fuse box to make sure that the fuse for
Power cut Check whether other kitchen appliances are working
The appliance door will not open; the
5 symbol is shown in the display
Although the appliance is switched
on, it cannot be operated; the 1
symbol is shown in the display
The cooking compartment does not
heat and "Demo mode on" is shown in
the display
--------
The appliance door is locked until the cooking compartment has cooled down.
The child lock is activated
The appliance is in demo mode Switch off the fuse in the fuse box and switch it back
Maximum operating time exceeded
Your appliance automatically ends the operation if no
duration has been set and the setting has not been
changed for a long time.
The point at which this occurs depends on the
temperature or grill setting that has been set.
A message appears on the display on the appliance to
say that the operation is being ended automatically. The
operation is then cancelled.
To use the appliance again, first switch it off. To switch
the appliance back on again set the required operation.
Replacing the bulb in the top of the cooking compartment
this message appears again, contact the after-sales
service.
the appliance is in working order
Wait until the 5 symbol goes out
Press and hold the 1 button until the 1 symbol
goes out
on again after approx. 10 seconds. Switch on the
appliance and select "Demo mode off" in the settings
~ "Basic settings" on page 15
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:Warning
Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
1. Place a tea towel in the cold cooking compartment
to prevent damage.
2. Turn the glass cover anti-clockwise to remove it
(figure !).
3. Pull out the bulb – do not turn it (figure ").
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
If the cooking compartment light bulb fails, it must be
replaced. Heat-resistant, 35 watt, 230 V halogen bulbs
are available from the after-sales service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
:Warning
Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
22
21
4. Screw the glass cover back in.
Customer service en
5. Remove the tea towel and switch on the circuit
breaker.
Glass cover
If the glass cover of the halogen bulb is damaged, it
must be replaced. You can obtain a new glass cover
from the after-sales service. Please specify the E
number and FD number of your appliance.
4Customer service
Customer service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please give the full product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
bearing these numbers can be found when you open
the appliance door.
To save time, you can make a note of the number of
your appliance and the telephone number of the aftersales service in the space below, should it be required.
E no. FD no.
After-sales service O
Please note that a visit from an after-sales service
engineer is not free of charge, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
GB 0344 8928999
Calls from a BT landline will be charged at up
to 3 pence per minute. A call set-up fee of up
to 6 pence may apply.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
23
en Dishes
PDishes
Dishes
You can use the "Dishes" operating mode to prepare a
wide variety of food. The appliance selects most
settings for you.
Information about the programs
■ The cooking result depends on the quality of the
food and the type of cookware. For an optimal
cooking result, use food that is in good condition
and chilled meat only.
■ The appliance chooses the optimal heating mode
and the time and temperature setting for you. You
will only be asked to enter the weight. It is not
possible to set weights outside of the intended
weight range.
■ When roasting dishes for which the appliance will
apply the temperature selection for you,
temperatures of up to 300 °C can be saved.
Therefore, make sure that you use cookware that is
sufficiently heat resistant.
■ Information is provided, e.g. on cookware, shelf
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc., during
cooking. This is shown on the display shortly after
operation starts. An audible signal will remind you at
the right time.
■ Information on the right kind of cookware to use and
tips and tricks for the preparation can be found at
the end of the instruction manual.
The program has ended
An audible signal sounds. The oven stops heating. You
can cancel the audible signal early using the 0 button.
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested. You
can change this if you wish.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears on the display.
Cancelling the program
Press the "On/off" button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
Refer to the time-setting options. ~ "Time-setting
options" on page 13
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to start. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.
Selecting and setting food
1. Press the menu button.
2. Use the rotary selector to select "Dishes".
3. Touch the arrow ¿.
The first dish appears, along with a default value for
the weight.
4. Use the rotary selector to select the required food.
5. Touch the arrow ¿.
You will be guided through the entire setting process for
your chosen food. Always touch the arrow ¿.
Once you have implemented all the settings, start by
pressing the "Start/stop" button.
Notes
■ The appliance informs you if the cooking
compartment is still too hot for your chosen food.
■ If you press the "Start/stop" button during operation,
the set mode pauses. None of the settings can be
changed. Press the "Start/stop" button to resume
operation.
24
6
6
Siemens-Electrogeräte GmbH
Carl-Wery-Straße 34, 81739 München
siemens-home.com
*9001006964*
9001006964 940604
Loading...