Atmos F-350
ORDERCODE 60880
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: +31 45-5667700
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Atmos F-350 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied. For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec |
|
|
Showtec Atmos F-350™ Product Guide |
|
|
Warning.................................................................................…...……………..…………………………….…………. |
2 |
|
Safety-instructions………………………………………………………………………………………………………. |
2 |
|
Operating Determinations.…………………………………………………………………………………………… |
4 |
|
Rigging.…………………………………………………………………………………………………………………… |
4 |
|
Return Procedure……………………………………………………………………………...................................... |
5 |
|
Claims……………………………………………………………………………......................................................... |
5 |
|
Description..…............................................................................……….……………………………………………… |
6 |
|
Features………………………………………………………………………………….……………………………….. |
6 |
|
Overview…………………………………………………………………………………………………..……………... |
6 |
|
Backside…………………………………………………...…...….……………….…………………...….………….… |
7 |
|
Installation...............................................................................…...…………………………………….……………… |
7 |
|
Installing the Fazer................................................ |
........………………………………………..……………….….. |
7 |
Set Up and Operation.....................................................................……..……………………………….…………… |
7 |
|
Control Modes…………………………………………………………………………………………………….…….. |
8 |
|
Wireless remote control…………………………………………………………..……………………………… |
8 |
|
Multiple Atmos fazers (DMX control)……………………………………………………..…………………… |
8 |
|
Dipswitch setting for DMX Mode…..……………..…………………………………………………………………. 9 |
||
DMX Quick Reference Chart…………………………………………………………………………………………. 10 |
||
Fixture Linking…………………............……..……………………………………..…………………..…………..…… |
11 |
|
Data Cabling……………….........……..……………………………………………..………………………….…….. |
11 |
|
DMX Channels.........................………………………………………………………………………………………… |
11 |
|
Maintenance...................................................................................………..………….…….…………….………….. |
11 |
|
Performance notes............................................................ |
............…………………….……………………….…. |
12 |
Replacing the Fuse........................................................................…………………….………………………….. |
12 |
|
Troubleshooting.................................................................. |
..........………………….………………….…………….… |
12 |
No Response to DMX ....................................................................………………….……………………………. |
12 |
|
Product Specifications.......................................... |
.......................……………….…….……………………………… |
14 |
1
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
•Showtec Atmos F-350 fazer with powercable 1,25m
•Included: Wireless Remote Control
•User manual
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before filling the tank!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device have to:
-be qualified
-follow the instructions of this manual
CAUTION! Be careful with your operations. With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
2
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never aim the output nozzle directly at people.
Never aim the output nozzle at open flames.
Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.
Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with water.
Never lock smoke-filled rooms. Risk : panic among the locked persons!
Never smoke permanently! The smoke must only be used for a short period -
Do not insert objects into air vents.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the fazer output bare-handed during its operation (output becomes very hot).
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only use smoke in well ventilated rooms.
Only use the high-quality, water-based fog liquid, that your Showtec dealer recommends. (5L fazer fluid ordercode 60603) Other fog liquids may cause poor effect fog, clogging and “spitting” of unevaporated liquid.
Avoid flames and do not put close to flammable liquids or gases.
Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause damage to the pump and the heater.
Always allow free air space of at least 20 cm around the sides and top of the unit.
Always drain tank before shipping or otherwise transporting this unit.
Always keep tank cap closed while operating.
Always keep the fog machine upright.
Always unplug your SHOWTEC Fog Machine before filling its tank.
For adult use only. Fog machine must be installed out of the reach of children. Never leave the unit running unattended. Leave the grid guarding the nozzle in place if the machine is to be used in the presence of children
Always keep the nozzle at least 50 cm away from contact with anything, while in operation.
Always disconnect power from the mains, when device is not used or before cleaning ! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time.
Make sure that the core diameter of extension cords and power cords is sufficient for the required power consumption of the device.
The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly electrical shocks.
If the external cable is damaged, it has to be replaced by a qualified technician.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
If your Showtec Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
For replacement use fuses of same type and rating only.
Allow time to cool down, before cleaning or servicing.
3
The residence time of persons in smoke-filled rooms with less than 15 m of sight must never exceed 5 minutes.
The fog vapour at point of release is under pressure and is extremely hot.
The output nozzle becomes very hot during operation (300 degrees C). Keep flammable materials at least 50 cm away from the nozzle.
The use of smoke-fluid is only allowed for adults.
Repairs, servicing and electric connection must be carried out by a qualified technician.
In dense, smoke-saturated surroundings, the oxygen portion is substantially reduced!
The smoke density must be portioned in a way that the sight will always be above 5 m - Danger of anxiety state due to missing orientation!
The user is responsible for correct positioning and operating of the Atmos F-350. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Every smoke-filled room must be overseen by a skilled person.
WARRANTY: Till one year after date of purchase.
Operating instructions:
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 0,5 meters. The maximum ambient temperature ta = 45°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
If this device is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, explosion, crash etc.
You endanger your own safety and the safety of others
Improper installation can cause serious damage to people and property !
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the fazer is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the fazer, with the mounting-bracket, to the trussing system.
The fazer must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety-cable.
When rigging, derigging or servicing the fazer, always make sure, that the area below the installation place is blocked and staying in the area is forbidden.
The Atmos Fazer can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious damage to people and property !
4
Loading...