Page 1
LCD Projector
Quick Reference for Notevision
5
1. Connecting an IBM or Compatible PC
1. Plug one end of the supplied computer cable into the blue
“COMPUTER INPUT” port on the projector.
2. Plug the other end of the supplied computer cable into the
“Monitor Output” port on the computer. (Also blue on many
PCs.)
1
Computer
cable
(supplied)
3. Plug the supplied power cord into the AC socket (1) on the
back of the projector and press the MAIN POWER switch (
4. Press the POWER ON button on the projector or on the “Power”
remote control.
2
1
POWER ON
button
2
).
2
VOL
ON
MUTE
OFF
BLACK
LASER
SCREEN
MENU
TOOLS
3. Connecting a Macintosh
Use the supplied Macintosh adaptor when using Macintosh
computers with your Sharp projector. This adaptor may not be
necessary with some Macintosh computers.
Macintosh adaptor (supplied)
ON
OFF
1. Set the proper switches on the supplied Macintosh adaptor to
the desired resolution. (See back of adaptor for specific
resolutions.)
2. Connect the supplied Macintosh adaptor to one end of the
supplied computer cable.
3. Connect the other end of the Macintosh adaptor to the “Monitor
Output” port on your Macintosh computer.
4. Plug the other end of the supplied computer cable into the blue
“COMPUTER INPUT” port on the projector.
4
3
Computer
cable
(supplied)
2
Macintosh
adaptor
(supplied)
R-CLICK ENTER
IrCOM
INPUT
FREEZE
AUTO SYNC
KEYSTONE
5. Turn on the computer.
ENLARGE
OFF
6. Press the AUTO SYNC button on the projector or on the
“Power” remote control to adjust the image.
AUTO SYNC
button
2.
Using the “Wireless” Mouse (PC or Macintosh)
• Make sure that your computer is turned off while making any mouse control
cable connections.
• When using the wireless mouse with an IBM or compatible PC, you can use
either a PS/2 or Serial cable connection. (See diagram below.)
• Use the supplied mouse control cable for Mac when using the remote mouse
receiver with a Macintosh computer.
Remote mouse receiver (supplied)
Mouse control cable
for Mac (supplied)
Mouse control cable for IBM PS/2 (supplied)
ADJ.
MOUSE
BLACK
LASER
SCREEN
MENU
TOOLS
LIGHT
LCD PROJECTOR
R-CLICK ENTER
IrCOM
INPUT
FREEZE
AUTO SYNC
KEYSTONE
ENLARGE
ADJ.
MOUSE
Use this terminal to connect the
supplied mouse control cable to
the remote mouse receiver.
Mouse control serial
cable (supplied)
5. Plug the supplied power cord into the AC socket (1) on the
2
back of the projector and press the MAIN POWER switch (
).
2
1
6. Press the POWER ON button on the projector or on the “Power”
remote control.
VOL
TOOLS
ON
OFF
SCREEN
R-CLICK ENTER
INPUT
FREEZE
MUTE
BLACK
LASER
MENU
IrCOM
AUTO SYNC
POWER ON
button
7. Turn on the computer.
8. Press the AUTO SYNC button on the projector or on the
“Power” remote control to adjust the image.
AUTO SYNC
button
KEYSTONE
TOOLS
MOUSE
BLACK
SCREEN
LIGHT
LCD PROJECTOR
R-CLICK ENTER
INPUT
FREEZE
KEYSTONE
MOUSE
LIGHT
ENLARGE
LASER
IrCOM
AUTO SYNC
ENLARGE
ADJ.
MENU
ADJ.
XG-NV5XB/QR(E-1)
Page 2
4. Connecting Video Equipment 6. Turning the Projector Power off
(VCR, DVD Player, Laser Disc Player)
1. Connect the yellow (Video) RCA connector to the corresponding
yellow terminals on the projector and video source.
2. Connect the red and white (Audio) RCA connectors to the
corresponding red and white terminals on the projector and
video source.
1. Press the POWER OFF button on the projector or on the
“Power” remote control.
VOL
ON
MUTE
POWER OFF
button
OFF
BLACK
LASER
SCREEN
MENU
TOOLS
Use this terminal when the audiovisual equipment to be connected
has an S-VIDEO output terminal.
To audio
output
terminals
To video
output
terminal
To S-video
output
terminal
• For better quality video, the S-video connection can be used.
R-CLICK ENTER
IrCOM
INPUT
FREEZE
AUTO SYNC
KEYSTONE
2. Press the POWER OFF button again while the following screen
is displayed.
ENLARGE
ADJ.
MOUSE
LIGHT
3. Wait until the projector fan turns off, then press the MAIN
POWER switch.
MAIN POWER Switch
5.
Selecting and Checking the Input Mode
1. Press the INPUT SELECT button on the projector or on the
“Power” remote control to select the desired input mode.
INPUT
SELECT
button
2. Press the INPUT SELECT button again to change the mode as
MOUSE
TOOLS
BLACK
SCREEN
LIGHT
LCD PROJECTOR
R-CLICK ENTER
INPUT
FREEZE
KEYSTONE
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
LASER
IrCOM
AUTO SYNC
ENLARGE
MENU
ADJ.
shown below.
COMPUTER INPUT 1 COMPUTER INPUT 2 VIDEO INPUT
PDF operation manuals in several languages are included in the CD-ROM. See “How to Access
the PDF Operation Manuals” in the operation manual of the projector for more details.
Printed in Japan
TINS-6598CEN1
T2054-A
9P07-JWG
XG-NV5XB/QR(E-2)
Loading...