The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3:
Projection Formulas: Definitions: 16:9 Screen Formulas
XP-57UL: C(Wide) = 0.396W – 1.676 ------ C(Tele) = 0.3552W – 1.919W = Image Width W = H x 16/10
XP-58ZL: C(Wide) = 0.5636W – 1.395 ------ C(Tele) = 0.7684W – 1.718 H = Image Height (size) H = W x 10/16
XP-59ZL: C(Wide) = 0.7804W – 3.411 ------ C(Tele) = 1.1403W – 3.5333 C = Throw distance Screen Diagonal = W x 18.868/16
https://business.sharpusa.com/ X141Q_X171Q Page 2 of 17
Page 3
Sharp Imaging & Information Company of America
Screen Center
Screen Top
Shift Range
C
Screen Center
C
4.46
X141Q & X171Q Installation Guide
Rev.1.1
Desktop and Ceiling Mount
Ceiling Mount Installation
Note: Lens Shift Feature is not available for the NP16F-4KL.This lens should only be used for “zero degree”/”no-offset” applications.
https://business.sharpusa.com/ X141Q_X171Q Page 3 of 17
Page 4
Sharp Imaging & Information Company of America
Lens Shift Range for Desktop and Ceiling Mount Application
X141Q & X171Q Installation Guide
Desktop and Ceiling Mount
Lens Shift Adjustable Range
The diagram below shows the location of the image position in the lens after selecting HOME POSITION. The lens can
be shifted within the shaded area as shown using the normal projection position as a starting point.
Note: XP-61ZL lens shift range.
Note: Projector is set out of the box at maximum lens shift, which is not shown below.
(W: width of projected image, H: height of projected image)
Rev.1.1
https://business.sharpusa.com/ X141Q_X171Q Page 4 of 17
Page 5
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Rev.1.1
Desktop and Ceiling Mount
Cabinet Dimensions
The following diagrams show the cabinet dimensions for the PX1005QL.
Dimensions are in inches. For millimeters multiply by 25.4.
Note: Dimensions below shown without a lens
https://business.sharpusa.com/ X141Q_X171Q Page 5 of 17
Page 6
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Rev.1.1
Desktop and Ceiling Mount
Cabinet Dimensions
https://business.sharpusa.com/ X141Q_X171Q Page 6 of 17
Page 7
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Rev.1.1
Desktop and Ceiling Mount
Optional Lens Dimensions
https://business.sharpusa.com/ X141Q_X171Q Page 7 of 17
Page 8
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Rev.1.1
Desktop and Ceiling Mount
Ventilation Requirements
• Clearance for Installing a Projector:
• Installing Projectors Side-By-Side :
Portrait Requirements
https://business.sharpusa.com/ X141Q_X171Q Page 8 of 17
Page 9
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Desktop and Ceiling Mount
Hazard Zones and Risk Groups
Rev.1.1
https://business.sharpusa.com/ X141Q_X171Q Page 9 of 17
Page 10
Sharp Imaging & Information Company of America
X141Q & X171Q Installation Guide
Desktop and Ceiling Mount
Rev.1.1
https://business.sharpusa.com/ X141Q_X171Q Page 10 of 17
Baud Rate: 38400 bps (for cable lengths longer than 20’, it is recommended changing to 9600 bps in setup menu)
Data Length: 8 bits
Parity: No Parity
Stop Bit: One bit
X on/off: None
Communications: Full duplex
PC Control Connector (D-Sub 9P)
Note 1 : Pins 1, 4, 6, and 9 are used inside the projector.
Note 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps.
Note 3: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
https://business.sharpusa.com/ X141Q_X171Q Page 17 of 17
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.