SHARP LC-60LE638E Service Manual
TopPage
LC-52/60LE830E,RU/831E,S/833E/60LE635E/RU,636E/S,638E
SERVICE MANUAL
No. S81T352LE830E
LCD COLOUR TELEVISION
LC-52/60LE830E/RU/E[B]/RU[B]
LC-52/60LE831E/S/E[B]/S[B]
LCD Module Edition
LC-52/60LE833E/E[B]
LC-60LE635E/RU
LC-60LE636E/S
MODELS
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
CONTENTS
OUTLINE
CHAPTER 1. Removing LCD Module
[1] Removing LCD Module (LC-52LE835E/
RU,831E/S,833E)........................................... 1-1
[2] Removing LCD Module (LC-60LE835E/
RU/E[B]/RU[B],831E/S/E[B]/S[B],833E/
E[B],60LE635E/RU,636E/S,638E) ................. 1-2
LC-60LE638E
Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
LC-52/60LE830E,RU/831E,S/833E/60LE635E/RU,636E/S,638E
LC52LE830E
OUTLINE
• Information of service parts in the LCD Module
Unit
Model Name Unit Name Description
LC-52LE830E/RU,831E/S,833E R1LK520D3GW40P 52" LCD Panel Module Unit
LC-52LE830E[B]/RU[B],831E[B]/S[B],833E[B] R1LK520D3GW4BY 52" LCD Panel Module Unit
LC-60LE830E/RU,831E/S,833E R1LK600D3GW40H 60" LCD Panel Module Unit
LC-60LE830E[B]/RU[B],831E[B]/S[B],833E[B] R1LK600D3GW4BH 60" LCD Panel Module Unit
LC-60LE635E/RU,636E/S,638E R1LK600D3GW7CH 60" LCD Panel Module Unit
Service Manual
(LK520D3GW40P)
(LK520D3GW4BY)
(LK600D3GW40H)
(LK600D3GW4BH)
(LK600D3GW7CH)
i
LC-52/60LE830E,RU/831E,S/833E/60LE635E/RU,636E/S,638E
LC52LE830E
CHAPTER 1. Removing LCD Module
Service Manual
[1] Removing LCD Module (LC-52LE835E/RU,831E/S,833E)
1. Remove the 19 lock screws , 5 lock screws , 21 lock screws and detach the Bezel Unit (Top) , Bezel Unit (Bottom) , Bezel Unit
(Right) , Bezel Unit (Left) .
2. Detach the 52” LCD Panel Unit , P-Chassis (Top) , P-Chassis (Bottom) , 2 P-Chassis (Left/Right) .
3. Detach the DBEF Sheet , Lens Sheets , Diffusion Sheets , Light Guide Plate , Reflection Sheet .
4. Remove the 28 lock screws , and detach the 2 Installation Angle .
5. Remove the 48 lock screws , and detach the 4 LED PWB .
6. Remove the 10 lock screws , and detach the 2 Holder Unit .
7. Detach the Fit Cover (Cap) , and Disconnect the LED PWB Connection Harness .
8. Detach the BL Chassis .
1
2
Bezel Unit
(Left)
7
Bezel Unit (Bottom)
1
52" LCD
8
Panel Unit
Bezel Unit (Top)
4
5
3
P-Chassis Unit (Top)
P-Chassis
Unit (Left)
11
1
6
Bezel Unit
1
(Right)
LED PWB
Reflection Sheet
Diffusion Sheet
DBEF Sheet
9
Installation Angle
18
21
16
14
12
11
P-Chassis Unit (Right)
10
P-Chassis Unit (Bottom)
BL Chassis
26
19
Fit Cover
(Cap)
13
24
Light Guide
Plate
15
Lens Sheet
22
18
Installation Angle
23
Holder Unit
LED PWB
19
21
1 – 1
25
20
20
21
LED PWB
21
LED PWB
22
Holder Unit
23
Loading...