Saturn ST-PS0280 User manual

1
ST-PS0280
BATHROOM SCALES
НАПОЛЬНЫЕ ВЕСЫ
ПІДЛОГОВІ ВАГИ
2
3
GB
OPERATION
Step 1: To make sure accuracy, place the
scale on a hard, flat floor and avoid carpet or soft surface. Make sure to put it on hard surface such as marble, floor tile etc., and make sure no foreign bodies are beneath the scale before weighing. Step 2: Make sure to put the scale in the light (sunlight or lamplight), and solar power panels are not covered. If LCD does not show a flashing "0", please turn on the lamp or move the scale to other place with light not less than 70lx. The scale will switch on again after 60-90 seconds (the stronger the light is, the shorter time it needs).
Step 3: Enter standby mode, LCD shows a flashing "0".
Step 4: Step onto the scale gently. LCD shows "—", meaning weighing is proceeding. Wait for about 3 seconds until the scale displays weight reading.
4
Step 5: LCD will show weight reading for
5
about 12 seconds.
3. It is suggested to use the scale in the light not less than 70lx.
CONVERTING WEIGHT UNIT
If the scale is with both measuring system of Metric (kilograms) and Imperial (pounds, stones), you can convert weight unit as follows:
1. Find unit switch on the back of scale.
2. Pull up and down the unit switch to convert scale unit between kg-st-lb.
OVERLOAD INDICATION
Scale overload (max. weight capacity is indicated on the scale). Please step off to avoid damage.
RE-TESTING
Display when you step off the scale, means this weight reading with error. Please re-test.
POWER SUPPLY
1. The scale is solar power supply. It can keep working in the light (sunlight or lamplight). LCD shows a flashing "0", when standby. DO NOT cover the solar power panels during using.
2. If the light is too weak, scale will shut off due to low power. Please move the scale to other place with stronger light, wait until the scale to switch on again to weigh.
ADVICE FOR USE & CARE
1. The glass platform will be slippery, when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care, as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in a horizontal position.
8. If failed to turn on the scale, please move to use in other place with stronger light.
9. Do not use it for commercial purpose.
SPECIFICATIONS
Maximum Weight: 150 kg Graduation: 100 g High Quality Hardened Glass Body: 6 mm Kg/Lb Switch Feeding Element Type: Solar Battery Operates under Natural and Artificial Lighting
SET
Bathroom scales 1 Instruction manual 1 Warranty book 1 Package 1
ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment!
Please remember to respect the local regulations: hand in the non­working electrical equipment to an appropriate waste disposal centre.
The manufacturer reserves the right to change the specification and design of goods.
Loading...
+ 4 hidden pages