Sanyo DP26670, DP32670 User Manual

diagonal / diagonale 66cm

Owner’s Manual

31.5

diagonal / diagonale 80cm

HDTV LCD/ DVD Combo

Combo TVHD de LCD / DVD

TVHD Combine ACL/ DVD

D

Manual del usuario

ESPAÑOL ENGLISH

Manuel d’instructions

P26670

DP32670

Model No. / No. de Modelo / Nº de modèle

© 2010 Sanyo Manufacturing Corporation

54H0521B_eng.indd 154H0521B_eng.indd 1 3/25/10 4:39:01 PM3/25/10 4:39:01 PM

26-Z5AE

Part No. / No. de parte / Nº de piece:

J54H0521B

ENGLISH

ONE-YEAR LIMITED PARTS AND LABOR WARRANTY

THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PUR­CHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO,
EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY
APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS
USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

WARRANTY APPLICATION

FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation (SMC)

warrants this TV to be free from manufacturing defects in materials and workmanship under nor­mal use and conditions for parts and labor.

For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation
will replace any defective TV via exchange at the retailer. To ensure proper warranty application,

keep the original-dated-sales receipt for evidence of purchase. Return the defective TV to the
retailer along with the receipt and the included accessories, such as the remote control. The
defective TV will be exchanged for the same model, or a replacement model of equal value, if nec­essary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MER­CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OBLIGATIONS

For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product
to be free from defects in material and workmanship under normal use and conditions. During the
first 90 days under this warranty for any manufacturing defect or malfunction Sanyo
Manufacturing Corporation will provide a new TV via exchange at the retailer.

HOW TO MAKE A CLAIM UNDER THIS WARRANTY

Please call 1-800-877-5032. Please be prepared to give us the television’s model number and seri-

al number when you call. The model number and serial number are printed on a label attached to
the back of the unit.

This warranty expresses specific contractual rights; retail purchasers may have additional statuto­ry rights which vary from state to state.

For customer assistance, call toll free 1-800-877-5032.

(EFFECTIVE: March 1, 2007)

Your Sanyo HDTV is registered at the time of purchase, please keep sales receipt for
future reference.

For your protection in the event of theft or loss of this product, please fill in the informa­tion requested below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.

Model No. _________________________ Date of Purchase ____________________

Serial No ._________________________ Purchase Price ______________________

Where Purchased ____________________

Sanyo Manufacturing Corp.

3333 Sanyo Road, Forrest City, AR 72335

2

54H0521A_eng.indd 254H0521A_eng.indd 2 3/17/10 4:27:44 PM3/17/10 4:27:44 PM

TRADEMARKS

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

This product incorporates copy protection technology that is protected by U.S. and other intellectual property
rights. The use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi
Corporation. Reverse engineering or disassembly is prohibited.

is a trademark of DVD Format/Logo Licensing Corporation.

Manufactured under license under U.S.Patent#: 5,451,942 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital
Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.

“As an Energy Star® Partner, Sanyo Manufacturing Corporation has determined that this
product meets the EnergyStar® guidelines for energy efficiency.”

This symbol on the nameplate means the product is Listed by Underwriter’s Laboratories Inc.
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.

ENGLISH

SANYO recommends keeping the TV set at its factory settings or moving Energy Saver settings from “Level
1” to “Level 2” or “Level 3” to further reduce power requirements and increase energy savings. Doing so
contributes to the sustainability of our resources and environment.
For more information visit www.energystar.gov

3

54H0521A_eng.indd 354H0521A_eng.indd 3 3/20/10 9:49:21 AM3/20/10 9:49:21 AM

ENGLISH

The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY

OR MOISTURE.

FROM THIS PRODUCT AT TIMES.

CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the FCC Rules

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE
LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. RADIATION MAY
BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO
NOT STARE INTO THE BEAM.

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.

cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

could void the user’s authority to operate this equipment.

CLASS 1
LASER PRODUCT

Location of the required Marking

The rating sheet and the safety caution are
on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA
RADIATION PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.

Complies with FDA performance standards
for laser products except for deviations
pursuant to Laser Notice No. 50, dated
June 24, 2007.

The lamp(s) within this product contain mercury.
Disposal should be in compliance with local, state or federal laws.

4

54H0521A_eng.indd 454H0521A_eng.indd 4 3/17/10 4:27:44 PM3/17/10 4:27:44 PM

15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such

NEC-NATIONAL

as vases, should not be placed on the apparatus.

16) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.

17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.

18) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type of
liquid into the unit.

19) If an outside antenna or cable system is
connected to the unit, be sure the antenna or
cable system is grounded to provide some
protection against voltage surges and built-up
static charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to

ELECTRICAL CODE
S2898A

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

GROUND

CLAMP

ELECTRIC SERVICE

EQUIPMENT

ANTENNA
LEAD IN WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

grounding electrodes, and requirements for the grounding electrode.

20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.

22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.

ENGLISH

5

54H0521A_eng.indd 554H0521A_eng.indd 5 3/17/10 4:27:45 PM3/17/10 4:27:45 PM

IMPORTANT SAFETY INSTRUCTIONS (continued)

23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.

24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.

25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker
overheating and fire.

26) When you use the headphones, keep the volume at a moderate level. If you use the headphones
continuously with high volume sound, it may cause hearing damage.

27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the
laser beam. It may cause eye damage.

28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.

29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.

30) The socket-outlet must be installed near the unit and easily accessible.

CONDENSATION

Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In
such cases, change the location of the player.

HOW TO HANDLE THE LCD PANEL

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

•

•

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

The consumer electronics industry is committed to making home entertainment enjoyable and safe.

TUNE INTO SAFETY

One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.

6

54H0521A_eng.indd 654H0521A_eng.indd 6 3/17/10 4:27:45 PM3/17/10 4:27:45 PM

SAFETY PRECAUTIONS

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When
placing on a shelf leave 10 cm (4 inches) free space around the entire unit.

10cm

10cm

Notes when mounting the LCD TV/DVD on a wall

If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice,
and have the equipment professionally installed. Incomplete or improper installation may cause injury to you,
and/or damage to the LCD TV/DVD.

IMPORTANT NOTICE

Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for

long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:

•

Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on

•
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim
any responsibility for these symptoms.

LCD Panels are manufactured using an extremely high level of precision technology, however sometimes

•
parts of the screen may be missing picture elements or have luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some

•
equipment placed too near this unit may cause interference.
Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless

•
headphones.

ENGLISH

7

54H0521A_eng.indd 754H0521A_eng.indd 7 3/17/10 4:27:45 PM3/17/10 4:27:45 PM

Features

LCD color TV With DVD/CD player

Unique space saving design combines a 26/32 LCD color TV and a DVD/CD player.
A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a
DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality
is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language
selection, or multi-angle, etc.
The DVD PLAYER can play back both audio CDs and MP3/WMA/JPEG CDs.

Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial)

•

When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the
effect of being in a movie theater or a concert hall.

•

Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting
this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

•

By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs
recorded in this format can be enjoyed.

•

The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.

Convenience Features

Direct selection of your desired scenes using Title/Chapter/Time/Track - You can play back from the

desired scene.

Recalling Up to 12 Scenes ­Frame Advance - The PAUSE moves one frame at a time.
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/16-1/2 times.
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
Program Playback (Audio CD/MP3/WMA/JPEG CD) - You can play back tracks in programmed sequences.
Zoom - You can zoom in the selected subject on the screen during playback.

Note: Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back

for movies or programs.
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,
you can change the angles during playback.
Parental Control - You can limit the play back of scenes or sounds of DVD discs that have a rating level
encoded on the disc.

Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.

TV Features

Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for

hearing impaired viewers.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120
minutes to turn off automatically.
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on­screen programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-chip will allow you to set a restriction level.

You can program up to 12 scenes in memory and recall the marked scenes.

8

54H0521A_eng.indd 854H0521A_eng.indd 8 3/20/10 9:49:23 AM3/20/10 9:49:23 AM

Contents

Before using your unit

WARRANTY .....................................................2

TRADEMARKS .................................................3

IMPORTANT SAFETY INSTRUCTIONS ...........5

SAFETY PRECAUTIONS ................................. 7

IMPORTANT NOTICE .......................................7

Features ............................................................8

Contents ...........................................................9

Disc.................................................................10

Location of controls ......................................... 11

How to attach the stand ..................................12

How to remove the stand ................................12

Remote control ...............................................13

Power source ..................................................14

Antenna connections ......................................15

Cable TV connections ..................................... 16

TV operation

Starting setup .................................................17

TV operation ...................................................17

Quick guide for menu operation ......................18

Convenience functions ...................................19

Memorizing channels ......................................20

Checking the digital signal strength ................21

Labeling channels ...........................................21

Labeling video inputs ......................................21

Setting the V-Chip ...........................................22

Closed Caption ...............................................23

CC advanced ..................................................23

Setting the picture size .................................... 24

DVD operation

Preparation .....................................................25

Status display of disc ......................................25

Playback procedure ........................................25

Special playback ............................................. 26

Zooming ..........................................................26

Locating desired scene ................................... 26

A-B Repeat playback ......................................26

Marking desired scenes ..................................27

Changing angles .............................................27

Changing soundtrack language ......................27

Subtitles .......................................................... 27

Using HOME MENU .......................................28

Play mode .......................................................28

Audio Settings menu ....................................... 29

Video Adjust menu .......................................... 30

Quick guide for DVD menu operation ..............30

Function Setup ................................................ 31

Parental Control ..............................................32

Additional information

Language Code List ........................................ 33

Country/Area Code List ..................................33

Connections to other equipment .....................34

Reception disturbances ..................................38

Problems and troubleshooting ........................39

Specifications ................................................41

ENGLISH

9

54H0521A_eng.indd 954H0521A_eng.indd 9 3/17/10 4:27:46 PM3/17/10 4:27:46 PM

Disc

Playable discs

Disc type and logo mark content

DVD Video

CD-DA

The following discs are also available.

DVD-R/RW discs of DVD video format.

•
CD-R/RW discs of MP3/WMA/JPEG.

•

Audio

+

Video

(moving

pictures)

Audio

CAUTION:

•

Only the left types of discs can be played on this
unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc.
cannot be played.

•

8cm discs can be played directly. If an 8cm disc
adapter is used it will cause errors.

•

If you insert an irregular shaped disc, it may get
stuck and cause a malfunction.

•

The use of a ring protector or other disc
accessories will cause errors.

•

This unit is to be used exclusively with the NTSC
color system. PAL and SECAM system discs cannot
be used with this unit.

•

Some CD-R/RWs and DVD-R/RW cannot be played
back depending on the recording conditions.

Region Number

Region number (Regional restriction code) is built-in to the unit and DVD video discs.
Region number “1” or “ALL” of DVD video discs can be used on this unit.

Title

When two or more movies are recorded on a disc, the disc
is divided into two or more sections. Each section is called
a “TITLE”.

TITLE 1 TITLE 2

CHAPTER 1

DVD DISC

CHAPTER 2 CHAPTER 2 CHAPTER 3CHAPTER 1

Chapter

The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.

Track

An Audio CD can contain several items.
These are assigned to the tracks.

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5

Audio - CD

ALL

1

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.

•

Do not scratch the disc.

•

Do not get dirt on the surface of the disc.

•

Do not stick a label or adhesive tape on the disc.

•

Do not drop or bend the disc.

Storing Disc

•

Store the disc in the case to avoid risk of scratches, dirt or damage.

•

Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

•

Do not wipe the disc in a circular motion.

•

Do not use liquid or aerosol cleaners.

10

54H0521A_eng.indd 1054H0521A_eng.indd 10 3/17/10 4:27:46 PM3/17/10 4:27:46 PM

Location of controls

Front

Rear side

Remote sensor

Left side

DISC slot

POWER indicator

EJECT button

VOLUME +/– buttons

CHANNEL /1
(PLAY) button

CHANNEL /3
(STOP) button

MENU button
INPUT/ENTER button

POWER button

To display the menu screen.
Press MENU button to display the
menu screen.

CHANNEL / buttons, VOLUME
+/– buttons and INPUT/ENTER button

can be used to select the desired
setting during the menu screen
operations.

ENGLISH

PC MONITOR IN jack
VAR (VARIABLE) AUDIO OUT jack

DIGITAL AUDIO COAXIAL OUT jack

RF (ANT.) IN jack

AC INPUT jack

54H0521A_eng.indd 1154H0521A_eng.indd 11 3/17/10 4:27:47 PM3/17/10 4:27:47 PM

HDMI 2 IN jack

HDMI 1/DVI IN jack

PC/DVI AUDIO IN jack

AUDIO (L/R) jacks

(for COMPONENT IN and LINE2 VIDEO IN)

LINE 2 VIDEO IN jack

LINE 1 IN jacks (VIDEO/S-VIDEO/AUDIO (L/R))

COMPONENT IN jacks

11

How to attach the stand

NOTE:

• Unplug the AC cord from the AC INPUT terminal.

• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any
damage to the unit.

• Do not touch or press the LCD-screen, glass might break under pressure.

Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fi t in only one direction.
Hold the unit and attach the stand slowly.

Finally secure the bottom-plate with 2 screws (supplied).

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.•

How to remove the stand

When you transport this product, remove the stand and pack fl at against the back of the unit in the carton. To
remove the stand, perform these steps in reverse order.

For wall mounting, the stand must be removed (see page 7).

12

54H0521A_eng.indd 1254H0521A_eng.indd 12 3/17/10 4:27:50 PM3/17/10 4:27:50 PM

Remote control

POWER Power On/Off

DISPLAY Call TV information

TV/DVD Switch between TV and DVD

(EJECT) Eject a disc

0-9 Direct channel selection of TV

– Input “–” for digital channels

SLEEP Sleep timer

SETUP/
TV MENU

PICTURE SIZE Display PICTURE SIZE menu

▲▼◀▶ Cursor buttons

ENTER Enter information in the menu

MUTE Switch off the sound

EXIT/
CANCEL

VOL +/– Adjust volume of TV

INPUT SELECT Display source selection menu

RECALL/
ZOOM

/

CH

DVD MENU Display DVD menu

TOP MENU Select title

CCD/
JUMP

RETURN Remove DVD setup menu

AUDIO Change sound track language

SUBTITLE Set subtitle

ANGLE Change playback angle

PLAY MODE Select playback mode

SLOW Forward/Reverse- slow motion

MARKER Index

REPEAT A-B Repeat playback between A and B

SEARCH Fast Forward/Review playback

PLAY Playback

SKIP Skip chapter to forward or reverse direction

PAUSE Pause CD sound

STOP Stop

Call DVD information

Input setting
Enter a password

TV mode - Display menu of TV
DVD mode - Call up initial setup mode

Exit from On-Screen menu
Reset information in the menu

Switch between present/last channel
Zoom

Select channel of TV

Closed Caption
Locating desired scene

Still picture of DVD

ENGLISH

13

54H0521A_eng.indd 1354H0521A_eng.indd 13 3/17/10 4:27:52 PM3/17/10 4:27:52 PM