Sanyo DP23625 User Manual
AS
Model No.:
No. de Modelo:
N
o
de modèle :
Printed in U.S.A. SMC, April 2005
Impreso en U.S.A. SMC, Abril 2005
Imprimé aux É.-U. SMC, avril 2005
Part No. / No. de Parte /
No de pièce :
1AA6P1P4816 A–
Service Code/Código de Servicio/
Code de service : 610 320 3133
Wide-Screen LCD TV
Owner’s Manual
Manual Del Propietario
Manuel d’instructions
“Read this manual before assembling
(or using) this product.”
ENGLISH
Table of Contents . . . . . . . . . . . . . 3
ESPAÑOL
Contenido . . . . . . . . . . . . . . . . . . .22
FRANÇAIS
Table des matières . . . . . . . . . . . .43
Welcome to the World of Sanyo
Thank you for purchasing a Sanyo Widescreen LCD Television. You made an excellent
choice for Performance, Styling, Reliability, and
Value. The TV is designed with easy-to-use onscreen set-up instructions and operating
features. Need assistance? Visit our Web
site at
www.sanyoctv.com or call
toll free 1-800-877-5032. We can Help!
Importado Por :
Comercializadora México
Americana, S. DE R.L. DE C.V.
Nextengo Nº 78
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P.
02770, RFC CMA 9109119L0
Telefono: 55-5328-3500
ENERGY STAR
“As an ENERGY STAR®Partner, Sanyo
Manufacturing Corporation has determined
that this product meets the ENERGY STAR
®
guidelines for energy efficiency.”
DP23625
DEFINITION TELEVISION
ENHANCED
MONITOR
Important Safety Instructions for LCD TV
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit fully into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded so
as to provide some protection against voltage surges
and built up static charges. In the U.S. Selection 81021 of the National Electrical Code provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrodes.
16. An outside antenna system should not be located in the
vicinity of overhead power lines or other electrical
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
17. "Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus."
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL
ELECTRICAL CODE, ANSI/NFPA 70
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS
UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.”
NEC
- NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
2
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . 2
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ~ 6
Positioning the LCD TV . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries in the Remote Control . . . . . . . . 5
Detaching the TV Stand (Optional) . . . . . . . . . . . . . 5
Connecting Cable, RF Antenna, or a Satellite
Receiver to the TV 75-Ohm jack . . . . . . . . . . . . . . . 6
Top and Back Panels . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Component Audio Video Input Jacks . . . . 8
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . 8
Using the Audio Output Jacks . . . . . . . . . . . . . . . . . . . 8
Connecting a Stereo Amplifier . . . . . . . . . . . . . . . . . 8
Using the Audio / Video Input Jacks . . . . . . . . . . . . . . 9
Connecting a VCR or DVD Player . . . . . . . . . . . . 9
Using the Remote Control . . . . . . . . . . . . . . . . . 10 ~ 11
TV Adjustment and Setup . . . . . . . . . . . . . . . . . 12 ~ 14
How to Operate the On-Screen Menu . . . . . . . . . . 12
Adjusting Picture: Auto / Game / Manual . . . 12 ~ 13
Adjusting Sound: Audio / Bass / Treble /
Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the Channel: Antenna / CH. Search /
CH. Memory (Adding/Deleting Channels) . . 13 ~ 14
Selecting a Display Language . . . . . . . . . . . . . . . . . 14
Set Up: Color Enhancer . . . . . . . . . . . . . . . . . . . . 14
Closed-Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
V-Guide (Parental Control) . . . . . . . . . . . . . . . . 16 ~ 18
Helpful Hints (Problems / Solutions) . . . . . . . . . . . . 19
Warranty (Mexico) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Warranty (U.S.A. and Canada) . . . . . . . . . . . . . . . . . 21
Child Safety Matters . . . . . . . . . . . . . . . . . . Back cover
The surface of the cabinet can be damaged if not properly maintained. Many
common household aerosol sprays, cleaning agents, solvents, and polishes will
cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
The screen is likely to be damaged if it is not maintained properly. Do not use
hard objects like a hard cloth or paper. Do not use solvents or abrasives.
Note: Never spray liquids on the screen.
CARE AND CLEANING
3
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
23 inch Wide-screen TV
EDTV (Enhanced Definition Television) monitor
Detachable TV Stand
3-LY/C Digital Comb Filter
V-chip for Movies and TV guidelines rating limits
Closed-Captioning
MTS stereo/SAP decoder
Integrated front speaker 5 x 9 cm (two)
Surround Sound
Bass / Treble
Picture Shape: Full, Natural, Normal and Zoom
Factory preset adjustments for Picture
Automatic Channel Search
Color Enhancer
Receives 181 Channels: VHF 2~13; UHF 14~69;
Cable TV 1, 14~125
Component video input for the best picture signal
from your VCR or DVD
Rear AV input (2 sets R/L)
Audio Output (Fixed)
S-Video Input
Trilingual Menu Options
Sleep Timer
25-Key Remote Control
LCD Panel Size (Measured Diagonally):
23-inch Wide-screen TV / EDTV monitor
Picture Resolution . . . . . . . . . . 1280 x 720 (WXGA)
Scanning Format . . . . . . . . . . . . . . . . . . . . . . . 480p
(All signals are converted to 480p)
Jacks and Connectors:
RF Antenna Input (75 ohm)
AV1 Input: S-Video, Composite, Audio L/R
AV2 Input: Composite, Audio L/R
AV3 Input: Component (Y/Pb/Pr), Audio L/R
Audio Output L/R
Antenna Input . . . . . . . . . . . . UHF/VHF/CATV 75 ohm
Power Requirement . . . . . . . . Source: AC 120V, 60Hz
AC Power Consumption (average) . . . . . . . . . 95 watts
Size and Weight (approximately):
Horizontal Dim. (Width) . . . . . . 27.2 in. (692mm)
Vertical Dim. (Height) . . . . . . . 15.1 in. (385mm)
Depth Dim. (Thickness) . . . . . . 7.1 in. (181mm)
Weight . . . . . . . . . . . . . . . . . 16.5 (lbs), 7.5 (Kg)
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifica-
tions or unauthorized changes to this unit may
void the user’s authority to operate the unit.
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc.
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.
SPECIFICATIONS
FEATURES
4
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
GETTING STARTED
POSITIONING THE LCD TV
Always use an appropriate table or stand when
positioning your TV. For best viewing, avoid locating the TV where direct sunlight or indoor lighting
will fall on the screen.
DETACHING THE TV STAND
(Optional)
Tools Needed: Phillips screwdriver
Important Note: Position TV face down on a
padded or cushioned surface to protect the
screen and finish.
1
Remove four (4) screws from the metal
bracket. CAUTION: Hold the stand firmly as
you remove the last screw.
2
Carefully remove the TV stand.
5
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
TU
NER
V
H
F
U
H
F
C
A
T
V
INSTALLING BATTERIES IN THE
REMOTE CONTROL
Use 2 “AAA” batteries (Not supplied).
Be sure batteries are installed correctly.
Notes:
– Do not mix old batteries with new ones or
mix different types of batteries together.
– Remove the batteries if the remote control
will not be used for a month or more. Weak
batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
CATV FRANCHISE NOTE: Cable companies,
like public utilities, are franchised by local government authorities. To receive cable
programs, even with equipment which is
capable of receiving cable channels, the consumer must subscribe to the cable company’s
service.
L
(
M
O
N
O
)
S-VID
EO
AV2
AV1
AV3
TUN
E
R
V
V
R
R
VHF
UH
F
CATV
Y
Pb
P
r
L
(
M
O
N
O
)
R
L
R
L
AU
DIO OUTPU
T
34
R-AUDIO-L
R-AUDIO-L VIDEO
VIDEO
VHF/UHF
TO TV
FROM ANT.
RF
CHANNEL
IN
OUT
OUT
IN
YPbPr RGB
DIGITAL
AUDIO OUT
COAXIAL
COMPONENT OUT
(1080i/720p/480p)
(1080i/720/480p)
Y
P
B
P
R
A/V OUT
(480i)
S-VIDEO
OUT
AUDIO
L
R
VIDEO
RGB OUT
AUTHORIZED
SERVICE ONLY
ANT LOOP OUT
ANT IN
OUTPUT
SELECTION
DIGITAL AUDIO
OUT
(OPTICAL)
CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE RECEIVER TO
THE TV
Cable Service
OR
RF Antenna
OR
Satellite Receiver
TV Back
VCR Back
GETTING STARTED
Operational Tip for Monitor Use:
If the TV is used as a monitor only,
with a DVD player or some other type
of external equipment, and no cable or
antenna signal is available, the following setup is necessary:
Your TV is designed to automatically
search for available channels. Therefore, the initial start up requires that
you press the MENU key, enabling the
TV to automatically go through the
channel search process before you can
operate the TV. After the initial channel
search is completed, you must press the
MENU key again to complete the
channel search process. This may take
several minutes.
After the channel search process is
complete (2 searches), you can press
the INPUT key on the remote control
to use the TV as a monitor.
TV will automatically select the correct Antenna mode for
the type of Analog RF signal connected.
Use “Antenna Selection” in the Setup menu to change the
Antenna Mode.
TV will switch off automatically after 15 minutes if there is
no signal reception (cable out or station not broadcasting).
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
6
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Notes:
– If you do not have a cable
box, connect cable directly
to TV 75 ohm jack or VCR.
– If you do not have a VCR,
connect signal directly to TV
75 ohm jack.
TOP AND BACK PANELS
POWER
CH
VOL
L
(
M
O
N
O
)
S-VID
EO
AV2
AV1
AV3
TUNER
V
V
R
R
V
HF
UHF
CATV
Y
P
b
P
r
L
(
M
O
N
O
)
R
L
R
L
AUDIO OUTPUT
TOP VIEW
Note: The Channel (up)
(down), Volume + (up) – (down),
and Power keys function exactly
like the keys on your remote
control.
S-Video Input Jack
To enhance video detail use
the S-Video AV1 jack
instead of the Video jack, if
available on your external
equipment. (S-Video connections will override
connections to the AV1
input jacks.) (See page 9.)
BACK VIEW
Antenna Input Terminal
Connect an RF antenna,
cable, or satellite receiver
to this jack as shown on
page 6.
Audio/Video Input Jacks
(AV1/AV2)
Connect video equipment here
(see page 9).
Note: S-Video connection overrides the AV1 video connection.
480i/p Component Video /
Audio Input Jacks (AV3)
Connect external equipment to the
Y, Pb, Pr and Audio L/R jacks.
(See page 8.)
7
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Audio Out Jacks
Connect external audio equipment
here (see page 8).
Loading...