Samsung BN68-01736B-00, 7 Series User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

	Country	Customer Care Centre	Web Site
	AUSTRIA	0800-SAMSUNG (726-7864)	www.samsung.com/at
	BELGIUM	02 201 2418	www.samsung.com/be
		800-726-786 (800 - SAMSUNG)	www.samsung.com/cz
	CZECH REPUBLIC	Distributor pro Českou republiku:
		Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
	DENMARK	70 70 19 70	www.samsung.com/dk
	EIRE	0818 717 100	www.samsung.com/ie
	FINLAND	030-6227 515	www.samsung.com/fi
	FRANCE	3260 SAMSUNG (€ 0,15/Min)	www.samsung.com/fr
		08 25 08 65 65 (€ 0,15/Min)
	GERMANY	01805 - SAMSUNG (726-7864) (€ 0,14/Min)	www.samsung.de
	HUNGARY	06-80-SAMSUNG (726-7864)	www.samsung.com/hu
	ITALIA	800-SAMSUNG (726-7864)	www.samsung.com/it
	LUXEMBURG	02 261 03 710	www.samsung.com/lu
	NETHERLANDS	0900-SAMSUNG (726-7864) (€ 0,10/Min)	www.samsung.com/nl
	NORWAY	815-56 480	www.samsung.com/no
	POLAND	0 801 801 881	www.samsung.com/pl
		022-607-93-33
	PORTUGAL	80820-SAMSUNG (726-7864)	www.samsung.com/pt
	SLOVAKIA	0800-SAMSUNG (726-7864)	www.samsung.com/sk
	SPAIN	902-1-SAMSU(72678)	www.samsung.com/es
	SWEDEN	0771-400 200	www.samsung.com/se
	SWITZERLAND	0800-SAMSUNG (726-7864)	www.samsung.com/ch
	U.K	0845 SAMSUNG (7267864)	www.samsung.com/uk
	TURKEY	444 77 11	www.samsung.com/tr
	ESTONIA	800-7267	www.samsung.ee
	LATVIA	8000-7267	www.samsung.com/lv
	LITHUANIA	8-800-77777	www.samsung.lt
	KAZAHSTAN	8-10-800-500-55-500	www.samsung.com/kz_ru
	KYRGYZSTAN	00-800-500-55-500	-
	RUSSIA	8-800-555-55-55	www.samsung.ru
	TADJIKISTAN	8-10-800-500-55-500	-
	UKRAINE	8-800-502-0000	www.samsung.ua
	UZBEKISTAN	8-10-800-500-55-500	www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model

Serial No.

BN68-01736B-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

© 2008 Samsung Electronics Co., Ltd. All rights reserved.

Contents
Connecting and Preparing Your TV
■ List of Parts........................................................................	2
■ Installing the Wall Mount Kit...............................................	2
■ Viewing the Control Panel..................................................	3
■ Viewing the Connection Panel...........................................	4
■ Remote Control..................................................................	7
■ Installing Batteries in the Remote Control..........................	8
■ Switching On and Off.........................................................	8
■ Placing Your Television in Standby Mode..........................	8
■ Viewing the Menus.............................................................	9
■ Using the TOOLS Button....................................................	9
■ Plug & Play Feature...........................................................	9
Channel Control
■ Setting the Country..........................................................	11
■ Storing Channels Automatically.......................................	11
■ Storing Channels Manually..............................................	13
■ Viewing the EPG (Electronic Programme Guide)
Information.......................................................................	15
■ Setting the Default Guide.................................................	16
■ Managing Channels.........................................................	17
■ Setting the Channel Mode................................................	25
■ Fine Tuning Analogue Channels......................................	25
■ Checking the Digital-Signal Information...........................	26
Picture Control
■ Changing the Picture Standard........................................	27
■ Customizing the Picture Settings.....................................	27
■ Adjusting the Detailed Settings........................................	28
■ Configuring Picture Options.............................................	29
■ Resetting the Picture Settings to the Factory Defaults.....	31
■ Viewing Picture-in-Picture................................................	32
Sound Control
■ Changing the Sound Standard.........................................	33
■ Selecting the Sound Mode...............................................	35
■ Connecting Headphones (Sold separately).....................	35
Time Setting
■ Setting the Clock..............................................................	36
■ Setting the Sleep Timer....................................................	37
■ Switching the Television On and Off Automatically..........	38

Function Description
■ Selecting a Menu Language............................................	39
■ Activating the Child Lock..................................................	39
■ Setting Up Your Personal ID Number (PIN).....................	40
■ Setting up the Parental Lock............................................	41
■ Setting the Subtitle...........................................................	42
■ Selecting a Teletext Language.........................................	43
■ Selecting a Preference Language....................................	43
■ Melody/Entertainment/Energy Saving..............................	44
■ Upgrading the Software...................................................	45
■ Viewing Common Interface..............................................	46
■ Selecting the CI (Common Interface) Menu.....................	46
■ To Select the Source........................................................	47
■ To Edit the Input Source Name........................................	47
PC Display
■ Using Your TV as a Computer (PC) Display....................	48
■ Display Modes..................................................................	48
■ Setting up the TV with your PC........................................	49
WISELINK
■ Using the WISELINK Function.........................................	50
■ Using the Photo List.........................................................	51
■ Sorting Photo List.............................................................	53
■ Viewing a Photo or Slide Show .......................................	57
■ Using the Music List.........................................................	61
■ Sorting Music List.............................................................	62
■ Playing a Music File.........................................................	66
■ Using the Setup Menu......................................................	68
About Anynet+
■ What is Anynet+?.............................................................	69
■ Connecting Anynet+ Devices...........................................	69
■ Setting Up Anynet+..........................................................	70
■ Scanning and Switching between Anynet+ Devices........	70
■ Recording.........................................................................	71
■ Listening through a Receiver (Home theater)..................	72
■ Troubleshooting for Anynet+ ...........................................	72
Recommendations for Use
■ Teletext Feature...............................................................	73
■ Auto Wall-Mount Adjustment (Sold separately) ...............	74
■ Using the Anti-Theft Kensington Lock
(depending on the model)................................................	76
■ Securing the TV to the Wall..............................................	77
■ Troubleshooting: Before Contacting Service Personnel...	78
■ Specifications...................................................................	79

English

Symbol

Press

Note

One-Touch Button

English -

Connecting and Preparing Your TV

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

	Remote Control & Batteries	Power Cord	Cover-Bottom	Cleaning Cloth
	(AAA x 2)
	• Owner’s Instructions	• Warranty card	• Safety Guide

Warranty card / Safety Guide (Not available in all locations)

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

Viewing the Control Panel

1 2

	3
	4
	5
	6
8	78

Front Panel buttons

Touch each button to operate.

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4). In the on-screen menu, use this button as you would use the ENTER button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3–+

Press to increase or decrease the volume.

In the on-screen menu, use the – + buttons as you would use the ◄ and ► buttons on the remote control.

4 C/P.

Press to change channels. In the on-screen menu, use the C/P.buttons as you would use the ▼ and ▲ buttons on the remote control.

5POWER INDICATOR

Blinks and turns off when the power is on and lights up in stand-by mode.

6 (Power)

Press to turn the TV on and off.

7REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

8SPEAKERS

English -

Viewing the Connection Panel

[TV Rear Panel]

[TV Side Panel]

#

Power Input

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2COMPONENT IN

-Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV

(or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

3HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4

-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

-No additional Audio connection is needed for an HDMI to HDMI connection.

-When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

English -

What is HDMI?

-“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.

-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/ Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable

Box/Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

DVI IN(HDMI2) [R-AUDIO-L]

-DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component.

	480i	480p	576i	576p	720p	1080i	1080p
HDMI/DVI 50Hz	X	X	X	O	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O	O
Component	O	O	O	O	O	O	O

4ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5SERVICE

-Connector for SERVICE only.

-Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

6COMMON INTERFACE Slot

-When not inserting “CI CARD” in some channels, “Scrambled Signal” is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

The place of the COMMON INTERFACE Slot may be different depending on its model.

7WISELINK

Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3).

8S-VIDEO or VIDEO / R-AUDIO-L

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to “R-AUDIO-L” on your set and the other ends to corresponding audio out connectors on the A/V device.

9Headphones jack

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

0AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre.

English -

!DIGITAL AUDIO OUT (OPTICAL)

-Connects a set of external headphones for private listening.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.

@ EXT 1, EXT 2
	Connector		Input		Output
		Video	Audio (L/R)	RGB	Video + Audio (L/R)
	EXT 1	O	O	O	Only TV or DTV output is available.
	EXT 2	O	O		Output you can choose.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

#Kensington Lock (depending on the model)

-The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The location of the Kensington Lock may be different depending on its model.

English -

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

1Television Standby button.

2Selects the TV mode directly.

3Number buttons for direct channel access

4One/Two-digit channel selection

5+: Volume increase

–: Volume decrease

6Available source selection

7Electronic Program Guide (EPG) display

8Use to quickly select frequently used functions.

9Use to see information on the current broadcast

0Colour buttons: Use these buttons in the Channel list and WISELINK, etc.

@Press to select the optional display and sound modes for sports, cinema and games.

#Use these buttons in the DMA, WISELINK and Anynet+.

( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

$ Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the ON/OFF light button set to On will reduce the battery usage time.)

%Previous channel

^Temporary sound switchoff

&P : Next channel

P : Previous channel

*Displays the main onscreen menu

( This function enables you to view and play photo and music files from an external device.

) Returns to the previous menu

aControl the cursor in the menu

bExit the on-screen menu

cUse this when connecting a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)” is “On” (see page 70)

dPicture size selection

eDigital subtitle display

fIt display “Channel List” on the screen.

Teletext Functions

2Exit from the teletext display

6Teletext mode selection (LIST/FLOF)

7Teletext store

8Teletext size selection

9Teletext reveal

0 Fastext topic selection

!Alternately select Teletext, Double, or Mix.

%Teletext sub page

&P : Teletext next page

P : Teletext previous page

* Teletext index ) Teletext hold b Teletext cancel

The performance of the remote control may be affected by bright light.

English -

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

Using the remote control with the ON/OFF light button set to On will reduce the battery usage time.

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4.Is there a power outage or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2.Press thebutton on your set.

You also can press the POWERbutton or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or	C/P.	button on
your set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWERbutton again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWERbutton on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2.To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down

( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

English -

Viewing the Menus

1.With the power on, press the MENU button. The main menu appears on the screen.

The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.

2.Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s sub-menu.

3.Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

Picture

Mode	:Standard
Backlight	: 7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G/R)	: G50/R50
Detailed Settings

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing.

1.Press the TOOLS button. The “Tools” menu will appear.

2.Press the ▲ or ▼ button to select a menu.

3.Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.

•Anynet+ (HDMI-CEC): see page 70

•Picture Size: see page 29

•Picture Mode: see page 27

•Sound Mode: see page 33

•Sleep Timer: see page 37

•SRS TS XT: see page 33

•Energy Saving: see page 44

•Dual l ll: see page 35

•PIP: see page 32

•Auto Adjustment: see page 49

Tools

Anynet+ (HDMI-CEC)

Picture Size	:	Auto Wide
Picture Mode	:	Standard
Sound Mode	:	Custom
Sleep Timer	:		Off
SRS TS XT	:		Off
Energy Saving	:		Off
Dual l ll	:		Mono
Move		Enter	e Exit

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.Press the POWER button on the remote control.

The message “Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.” is displayed.

Plug & Play

Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.

OK

Hyväksy

2.Press the ENTER button, then “Select the OSD Language” menu is automatically displayed. Press the ENTER button.

3.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

Plug & Play

Select the OSD Language

Menu Language

: English

►

Enter

English -

4.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

“Store Demo” mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

5.Press the ENTER button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

6.Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select “Start”. The settings differ according to the selected country. For nore details, refer to pages 11~14.

Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels.

Analogue: “Analogue” channels.

The channel search will start and end automatically.

Press the ENTER button at any time to interrupt the memorization process.

After all the available channels are stored, the message “Set the Clock Mode.” is displayed.

7.Press the ENTER button to select the “Clock Mode”.

Press the ▲ or ▼ button to select “Manual”, then Press the ENTER button.

If you select “Auto”, The message “Enjoy your viewing” is displayed. If you have received a digital signal, the time will be set automatically.

8.Select the “Day”, “Month”, “Year”, “Hour”, or “Minute” by pressing the ◄ or ► button. Set the “Day”, “Month”, “Year”, “Hour”, or “Minute” by pressing the ▲ or ▼ button.

You can also set the “Day”, “Month”, “Year”, “Hour” and “Minute” by pressing the number buttons on the remote control.

9.The message “Enjoy your viewing” is displayed.

When you have finished, press the ENTER button.

If you want to reset this feature...

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ENTER button again to select “Plug & Play”.

3.Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”.

If you want to change PIN number, refer to page 40.

For further details on setting up options, refer to the pages 9~10.

The “Plug & Play” feature is only available in the TV mode.

Plug&Play

Select‘HomeUse’wheninstallingthisTVinyourhome.

		StoreDemo		HomeUse
				Move	Enter
			Plug&Play
	SelectCountry.
	Country			:Finland	►
					Enter
			Plug&Play
	Selectthechannelsourcetomemorize.
		Digital&Analogue		Start
		Digital		Start
		Analogue		Start
			Move	Enter	Skip
			Plug&Play
	AutoStoreinprogress.			Channel69
		DigitalChannels:29
		AnalogueChannels:0
					20%
			Stop
				Enter	Skip
			Plug&Play
	AutoStoreiscompleted.
		DigitalChannels :45
		AnalogueChannels :32
			OK
				Enter	Skip
			Plug&Play
		SettheClockMode.
		ClockMode	: Auto
				Manual
			Move	Enter	Skip

Plug&Play

Setcurrent dateandtime
Day	Month	Year
01	01	2008
Hour	Minute
00	00

	Move	Adjust	Enter	Skip
	Plug&Play
	Enjoyyourviewing
		OK
Setup	Plug&Play			►
	Language		:English
	Time
	ChildLock		:On
	ChangePIN
	ParentalLock
	Subtitle
	TeletextLanguage		:----

Plug&Play

IfyouenterPIN,‘Plug&Play’willbestarted.Allchannel settingsanduserpreferenceswillbelost.

English - 10			0~9 EnterPIN		Return

Channel Control

Setting the Country

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Country”, then press the ENTER button.

3.Press the ▲ or ▼ button to select “Analogue Channel” or “Digital Channel”, then press the ENTER button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

4.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

Channel

Country	►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

3.Press the ▲ or ▼ button to select the channel source to memorize.

Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels.

Analogue: “Analogue” channels.

Scans for all channels with active broadcast stations and stores them in the TV’s memory.

Country

Channel	Auto Store	►
	Manual Store
	Full Guide
	Mini Guide
	Default Guide	: Mini Guide
	Channel List
	Channel Mode	: Added Ch.
	Fine Tune
	Auto Store
Select the Antenna source to memorize.
	Digital & Analogue	Start
	Digital	Start
	Analogue	Start

Move

Enter

Return

English - 11

Analogue

4.Press the ENTER button to select “Start”.

If you want to stop Auto Store, press the ENTER button. The “Stop Auto Store?” message will be displayed.

Select “Yes” by pressing the ◄or ►button, then press the ENTER button.

Auto Store

Auto Store in progress.	S3
Analogue Channels: 0	172MHz
	20%
Stop
Enter	Return

Digital & Analogue / Digital

4.The update procedures differ depending on the selected “Country”. Update the channel list by selecting an appropriate option.

When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select “Auto”, “Cable” or “Aerial”. Press the

ENTER button.

Press the ENTER button to select “Start”.

-Cable: Scans cable channels.

-Aerial: Scans aerial channels.

This product cannot scan both cable and aerial channels at the same time.

When it has finished, the number of scanned services will be displayed.

The existing favourite channel list will not be deleted when the channel list is updated.

When the “Country” was set to “Sweden”, or “Denmark”

Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the ENTER button.

When selecting “Cable”:

- Frequency: Displays the frequency for the channel. (Differs in each country)

- Modulation: Displays available modulation values. - Symbol Rate: Displays available symbol rates.

- Network ID: Displays the network identification code.

Press the red button to start the scan for digital services. When it has finished, channels are updated in the channel list.

When selecting “Aerial”:

Press the ENTER button to select “Start”.

When the “Country” was set to “Norway”

Press the ENTER button to select “Start”.

Auto Store

Select the Antenna source to memorize.
Cable		Start
Air		Start
Move	Enter	Return

Auto Store

		Network ID			Frequency
		999			143000kHz
		Modulation			Symbol Rate
		QAM 64			6875 kS/s
		Move		Adjust	Enter	Skip
		Auto Store
	Auto Store in progress.
		Digital Channels: 29				154MHz
		Analogue Channels: 0
						20%
				Stop
					Enter	Return

English - 12

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

•Whether or not to store each of the channels found.

•The programme number of each stored channel which you wish to identify.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Manual Store”, then press the ENTER button.

Channel

Country

Auto Store

Manual Store	►
Full Guide
Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

Digital Channel

3.Press the ▲ or ▼ button to select “Digital Channel”, then press the

ENTER button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39). Enter your 4 digit PIN number.

4.The update procedures differ depending on the selected “Country”. Update the channel list by selecting the appropriate option.

When the “Country” was set to “Finland”

Press the ▲ or ▼ button to select “Cable” or “Aerial”, then press the

ENTER button.

Manual Store
Select the Antenna source to memorize.
Cable	Start
Air	Start

When selecting “Cable”:

-Frequency: Displays the frequency for the channel. (Differs in each country)

-Modulation: Displays available modulation values.

-Symbol Rate: Displays available symbol rates.

Press the ENTER button to start the scan for digital services.

When it has finished, channels are updated in the channel list.

When selecting “Aerial”:

-Channel: Channel “21” to “69” in sequence are displayed (depending on the country)

-Frequency: The frequency available in the Channel group is displayed.

-Bandwidth: The available bandwidths are 8 MHz.

Press the ENTER button to start the scan for digital services.

When it has finished, channels are updated in the channel list.

When the “Country” was set to “Sweden”, “Denmark”, or “Norway”

-Channel: Channel “21” to “69” in sequence are displayed (depending on the country)

-Frequency: The frequency available in the Channel group is displayed.

-Bandwidth: The available bandwidths are 8 MHz.

Press the ENTER button to start the scan for digital services.

When it has finished, channels are updated in the channel list.

5.When it has finished, the number of scanned services will be displayed.

6.Press the EXIT button to exit.

Move

Enter

Return

Manual Store

Frequency	Modulation	Symbol Rate
177000kHz	QAM 16	4000 kS/s

Move

Adjust

Search

Return

Manual Store

Channel	Frequency	Bandwidth
31	554000 KHz	8MHz

Move

Adjust

Search

Return

Manual Store

Channel	Frequency	Bandwidth
31	554000 KHz	8MHz

Move

Adjust

Search

Return

English - 13

Analogue Channel

3.Press the ▲ or ▼ button to select “Analogue Channel”, then press the

ENTER button.

If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 39).

4.Press the ◄ or ► button to select the required item below. Press the ▲ or ▼ button to adjust to the setting satisfied.

5.Press the EXIT button to exit.

Programme (Programme number to be assigned to a channel)

Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC4.43

Press the ▲ or ▼ button to select the required colour standard.

Sound System: BG/DK/I/L

Press the ▲ or ▼ button to select the required sound standard.

Channel (When you know the number of the channel to be stored)

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers)

Press the ▲ or ▼ button to start the search.

The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number)

Set to OK by pressing the ENTER button.

Channel mode

-P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

-C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

-S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Country

Auto Store

Channel	ManualStore	Digital Channel
	Full Guide	Analogue Channel
	Mini Guide
	Default Guide	: Mini Guide
	Channel List
	Channel Mode	: Added Ch.
	Fine Tune
	Signal Information

Manual Store

Programme		Colour System	Sound System
	1	Auto	BG
Channel		Search	Store
C	--	62 MHz	?

Move Adjust Return

English - 14

Viewing the EPG (Electronic Programme Guide) Information

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

1.Press the MENU button to display the menu.

2.Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

3.Press the ▲ or ▼ button to select “Full Guide” or “Mini Guide” then press the

ENTER button.

Mini Guide

The information of each program is displayed by each line on the current channel Mini Guide screen from the current program onwards according to the program starting time order.

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

To...	Then...
Watch a programme in the	Select a programme by pressing the
EPG list	▲, ▼, ◄, ► button.
Exit the guide	Press the blue button

If the next program is selected, it is scheduled with the clock icon displayed. If the ENTER button is pressed again, press the

◄, ► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.

View programme	• Select a programme of your choice by
information	pressing the ▲, ▼, ◄, ► button.

•Then press the INFO button when the programme of your choice is highlighted.

•The programme title is on the upper part of the screen center.

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.

Toggle between the “Mini	Press the red button repeatedly.
Guide” or “Full Guide”
In Full Guide
• Scrolls backwards	• Press the green button repeatedly.
quickly (24 hours).
• Scrolls forwards quickly	• Press the yellow button repeatedly.
(24 hours).
In Mini Guide
• Display next page	• Press the green button.
quickly.
• Display previous page	• Press the yellow button.
quickly.

OYou can also display the guide menu simply by pressing the GUIDE button.

(To configure the “Default Guide”, refer to the descriptions on page 16.)

Auto Store

Manual Store

Channel

Full Guide

Mini Guide

Default Guide

: Mini Guide

Channel List

Channel Mode

: Added Ch.

Fine Tune

Signal Information

Full Guide

DTVCable900ftn

2:10Tue1Jun

Freshmen On Campus

2:00 - 2:30

No Detailed Information

Today

2:00 - 3:00

3:00 - 4:00

900

f tn

Freshmen O..

Street Hypn..

No Information

901

ITV Play

Mint Extra

902

Kerrang!

Loaded

No Information

903

Kiss

Fresh 40 with Dynamite MC

Kisstory

903

oneword

The Distillery

No Information

▼ 903 Smash Hits!

Smash Hits! Sunday

Watch

Information

Mini Guide

+24 Hours

Exit

Manual Store

Channel

Full Guide

Mini Guide

Default Guide

: Mini Guide

Channel List

Channel Mode

: Added Ch.

Fine Tune

Signal Information

Mini Guide

DTV Cable 900 f tn

2:00

Freshmen On Campus

2:30

Street Hypnosis

▼ 5:00

Booze Britain

Watch

Information

Full Guide

Next Page

Exit

English - 15

Setting the Default Guide

You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control is pressed.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Default Guide”, then press the ENTER button.

Channel

Full Guide

Mini Guide

Default Guide

: Mini Guide ►

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

3.Select “Mini Guide” or “Full Guide” using the ▲ or ▼ button, and press the

ENTER button.

4.Press the EXIT button to exit.

Channel

Full Guide
Mini Guide
DefaultGuide	: Mini Guide
Channel List	Full Guide
Channel Mode	: Added Ch.
Fine Tune
Signal Information

OYou can select these options by simply pressing the GUIDE button on the remote control.

English - 16

Managing Channels

Using this menu, you can Add/Delete or set Favourite channels and use the program guide for digital broadcasts.

Viewing All Channels

Show all currently available channels.

To use the Channel List function, operate the “Auto Store” first.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

Channel

Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

2.Press the ◄ button to select “Added Channels”.

3.Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER button.

4.Press the ▲ or ▼ button to select a channel to view, then press the

ENTER button. You can watch the selected channel.

Added	824	UKTV Gold
	825	UKTV style
Channels	A 1	C --
	A 2	C --
	A 3	♥ C --
	A 4	C --
	A 5	C --
	A 6	C --
	A 7	C --
	A 8	C --
All	Channel Type	Zoom	Select	Option
All	824	UKTV Gold
	825	UKTV style
Channels
	A 1	C --
	A 2	C --
	A 3	♥ C --
	A 4	C --
	A 5	C --
	A 6	C --
	A 7	C --
	A 8	C --
All	Channel Type	Zoom	Select	Option

O Press the CH LIST button on the remote control to bring up the channel lists.

Using the Colour buttons on the Remote with the Channel List

•Red (Channel Type): Toggle between your “TV”, “Radio”, “Data/Other” and “All”.

• Green (Zoom): Enlarges or shrinks a channel number.

•Yellow (Select): Selects multiple channel lists.

•TOOLS (Option): Displays the “Delete”(or “Add”), “Add to Favourite”(or “Delete from Favourite”), “Lock”, “Timer Viewing”, “Edit Channel Name”, “Sort”, “Select All”, “Deselect All” or “Auto Store” menu. (The Options menus may differ depending on the situation.)

A gray-coloured channel indicates the channel has been deleted. The “Add” menu only appears for deleted channels.

A channel marked with the “♥” mark means the channel has been set as a Favourite. The “Delete from Favourite” menu only appears for channels with the “♥” mark.

English - 17

Erasing and Adding Channels

You can delete or add a channel to display the channels you want.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2.Press the ◄ button to select “Added Channels”.

3.Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER button.

4.Press the ▲ or ▼ button to select a channel to delete, then press the

TOOLS button.

5.Press the ENTER button to select “Delete”.

All deleted channels will be shown on “All Channels” menu.

6.Press the EXIT button to exit.

You can also delete a channel to the “Added Channels” menu in the same manner.

To Add (Restore) a channel back to the Added Channel List, follow steps

1-3 above, press the ▲ or ▼ button to select a channel to add, the press the TOOLS button. Press the ENTER button to select Add.

OPress the CH LIST button on the remote control to bring up the channel lists.

Setting Your Favourite Channels

You can set channels you watch frequently as favourites.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2.Press the ◄ button to select “Added Channels”.

3.Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER button.

4.Press the ▲ or ▼ button to select a channel as a favourite channel.

Adding multiple channels to Favourites

Press the ▲ or ▼ button to select the desired channel in the channel list. Then press the yellow button. Repeat the above operation to select

multiple channels. The mark appears to the left of the selected channels.

5.Press the TOOLS button.

6.Press the ▲ or ▼ button to select “Add to Favourite”, then press the ENTER button. The “♥” symbol will be displayed and the channel will be set as a favourite.

7.To cancel your favourite channel selection, press the TOOLS button when a favourite channel is selected.

Press the ▲ or ▼ button to select “Delete from Favourite”, then press the

ENTER button.

The channel is deleted from “Favourites” and the “♥” mark also disappears.

Press the EXIT button to exit.

You can also Add or Delete a channel from Favourites in the “Added

Channels” menu in the same manner.

All favourite channels will be shown on “Favourite” menu.

OPress the CH LIST button on the remote control to bring up the channel lists.

	Mini Guide
Channel	Default Guide	: Mini Guide
	Channel List
	Channel Mode	: Added Ch.
	Fine Tune
	Signal Information

	824	UKTV Gold
All	825	UKTV style
Channels	A 1	C --	Delete
	A 2	C --	Add to Favourite
	A 3	C --	Lock
	A 4	C --	Timer Viewing
	A 5	C --	Edit Channel Name
	A 6	C --	Sort	▼
	A 7	C --
	A 8	C --
	All Channel Type	Zoom	Select	Option

	Mini Guide
Channel	Default Guide	: Mini Guide
	Channel List
	Channel Mode	: Added Ch.
	Fine Tune
	Signal Information

	824	UKTV Gold
All	825	UKTV style
Channels	A 1	C --	Delete
	A 2	C --	Add to Favourite
			Lock
	A 3	♥ C --
			Timer Viewing
	A 4	C --
	A 5	C --	Edit Channel Name
	A 6	C --	Sort	▼
	A 7	C --
	A 8	C --
	All Channel Type	Zoom	Select	Option

English - 18

Locking and Unlocking Channels

This function is available only when the “Child Lock” is set to “on”. (see page 39)

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

2.Press the ◄ button to select “Added Channels”.

3.Press the ▲ or ▼ button to select “All Channels”.

Shows all currently available channels.

Press the ENTER button.

When the “Country” was set to “Sweden”, or “Denmark”

Locking channels

4.Press the ▲ or ▼ button to select the channels you want to lock, then press the TOOLS button.

5.Press the ▲ or ▼ button to select “Lock”, then press the ENTER button.

6.Enter your 4 digit PIN number.

The “” symbol will be displayed and the channel will be locked.

The default PIN number of a new TV set is “0-0-0-0”.

If you want to change PIN number, refer to page 40.

7.Press the EXIT button to exit.

Unlocking channels

4.Press the ▲ or ▼ button to select the channels you want to Unlock, then press the TOOLS button.

5.Press the ▲ or ▼ button to select “Unlock”, then press the ENTER button.

6.Enter your 4 digit PIN number.

The channel is unlocked and the “” mark also disappears.

The default PIN number of a new TV set is “0-0-0-0”.

If you want to change PIN number, refer to page 40.

7.Press the EXIT button to exit.

	Mini Guide
Channel	Default Guide	: Mini Guide
	Channel List
	Channel Mode	: Added Ch.
	Fine Tune
	Signal Information

	824			UKTV Gold
All	825			UKTV style
Channels			1	C --	Delete
		A
			2	C --	Add to Favourite
		A
					Lock
			3	C --
		A
					Timer Viewing
			4	C --
		A
					Edit Channel Name
			5	C --
		A
			6	C --	Sort
		A				▼
			7	C --
		A
			8	C --
		A
All	Channel Type			Zoom	Select	Option
	824			UKTV Gold
All	825			UKTV style
Channels			1	C --	Delete
		A
			2	C --	Add to Favourite
		A
					Unlock
			3	C --
		A
					Timer Viewing
			4	C --
		A
			5	C --	Edit Channel Name
		A
			6	C --	Sort
		A				▼
			7	C --
		A
			8	C --
		A
All	Channel Type			Zoom	Select	Option

English - 19

When the “Country” was set to “Norway”

Locking channels

4.Press the ▲ or ▼ button to select the channels you want to lock, then press the TOOLS button.

5.Press the ▲ or ▼ button to select “Child Lock Setting”, then press the

ENTER button.

6.Press the ▲ or ▼ button to select “User” or “Always”, then press the

ENTER button.

•User: Locks the channel with the “Child Lock” function for the userconfigured period of time only. Select “User” and set the required time using the ▲, ▼, or the number buttons.

•Always: Locks the channel all the time with the “Child Lock” function.

7.Press the EXIT button to exit.

Channels All

824			UKTV Gold
825			UKTV style
		1	C --	Delete
	A
		2	C --	Add to Favourite
	A
				Child Lock Setting
		3	C --
	A
		4	C --	Timer Viewing
	A
		5	C --	Edit Channel Name
	A
		6	C --	Sort
	A				▼
		7	C --
	A
		8	C --
	A
All Channel Type			Zoom	Select	Option

Unlocking channels

4.Press the ▲ or ▼ button to select the channels you want to Unlock, then press the TOOLS button.

5.Press the ▲ or ▼ button to select “Child Lock Setting”, then press the

ENTER button.

6.Enter your 4 digit PIN number.

The channel is unlocked and the “ ” mark also disappears.

The default PIN number of a new TV set is “0-0-0-0”.

If you want to change PIN number, refer to page 40.

7.Press the ▲ or ▼ button to select “Off”, then press the ENTER button.

8.Press the EXIT button to exit.

Child Lock Setting

Mode		: User
On Time		Off Time
00	00	00	00

Move

Adjust

Enter

Return

English - 20

Reserving a Program (Timer Viewing)

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel

List; even when you are watching another channel. To reserve a program, set the current time first. See pages 36~37.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

Channel

Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

2.Press the ▲ or ▼ button to select a channel, then press the TOOLS button.

3.Press the ▲ or ▼ button to select “Timer Viewing”, then press the

ENTER button. The Reserve a Program (Timer Viewing) screen appears.

4.Press the ▲/▼/◄/► buttons to reserve a program and then press the

ENTER button. Reserving a program has been completed.

Press the EXIT button to exit.

You can also reserve a program in the “All Channels” or “Favourite” menus using the same procedures.

For information on how to confirm a viewing reservation, refer to page 22.

Only memorized channels can be reserved.

You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.

O Press the CH LIST button on the remote control to bring up the channel lists.

Channels Added

824	UKTV Gold
825	UKTV style
A 1	C --	Delete
A 2	C --	Add to Favourite
A 3 ♥ C --		Lock
A 4	C --	Timer Viewing
A 5	C --	Edit Channel Name
A 6	C --	Sort	▼
A 7	C --
A 8	C --
All Channel Type	Zoom	Select	Option
	Timer Viewing
Antenna	Channel		Repeat
DTV	800		Once
Date		Start Time
01 - 01 - 2008		10:00
Move	Adjust	Enter	Return

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program

Guide for the channel appears. You can reserve a program according to the procedures described above.

: A program currently being broadcast. : A reserved program

Channels Added

824

	825			1/1/2008
	908			1:59	LAROSE DES ....
	A 2	C --		2:59	WS MUSIC
	A 3	♥C --		3:21	Gralness de stars
	A 4	C --
	A 5	C --
	A 6	C --
	A 7	C --
	A 8	C --
	All Channel Type		Zoom		Option	Watch

English - 21

Confirming a Viewing Reservation

You can view, modify or delete a reservation.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the

ENTER button.

Channel

Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

2.Press the ◄ button to select “Added Channels”.

3.Press the ▲ or ▼ button to select “Programmed”.

Shows all current reserved programs.

Press the ENTER button.

Programmed

1/1/2008
13:59	5	TV1	Quincy, M.E
18:59	2	TV3	The Equalizer
20:59	2	TV3	McMillan & Wife
21:59	2	TV3	M.Spillane’s mike Hammer

Modifying a viewing reservation

4.To select a reservation item to be modified, press the ▲ or ▼ button and then press the TOOLS button.

5.Press the ENTER button to select “Change Info”.

6.Press the ▲/▼/◄/► buttons to change a reservation setting and then press the ENTER button. The reservation modification is applied.

Canceling a reservation

4.To select a reservation item to be canceled, press the ▲ or ▼ button, and then press the TOOLS button.

5.Press the ▲ or ▼ button to select “Cancel Schedules”, then press the

ENTER button.

6.Press the ◄ or ► button to select “OK”, then press the ENTER button. The viewing reservation has been canceled.

Press the EXIT button to exit.

Programmed Option

•Change Info: Select to change a viewing reservation.

•Cancel Schedules: Select to cancel a viewing reservation.

•Information: Select to view a viewing reservation.

•Select All: Select all reserved programs.

OPress the CH LIST button on the remote control to bring up the channel lists.

All Channel Type Zoom Select Option Information

Programmed	1/1/2008
	18:59	2	TV3	Cancel Schedules
	13:59	5	TV1	Change Info
	20:59	2	TV3	Information
				Select All
	21:59	2	TV3
All	Channel Type Zoom		Select	Option Information

English - 22

Edit Channel Name-Analogue

Channels can labeled so that their call letters appear whenever the channel is selected.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

2.Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button.

3.Press the ▲ or ▼ button to select “Edit Channel Name”, then press the

ENTER button.

4.Press the ▲/▼/◄/► button to select a letter, then press the ENTER button.

•Numeric buttons: You can enter numbers.

•Red button: You can switch between English and Characters.

•Green button: You can delete an already entered character.

•Yellow button: You can enter a blank space.

•Blue button: You can finish renaming a channel.

5.When you have finished, press the blue button to assign the new name.

Press the EXIT button to exit.

The names of digital broadcasting channels are automatically assigned and cannot be labelled.

Channel

Channels Added

All

1

A

H

O

V

Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

824UKTV Gold

825UKTV style

		1	C --	Delete
	A
		2	C --	Add to Favourite
	A
		3 ♥ C --		Lock
	A
		4	C --	Timer Viewing
	A
		5	C --	Edit Channel Name
	A
		6	C --	Sort
	A
		7	C --	▼
	A
		8	C --
	A
Channel Type			Zoom	Select	Option

		Edit Channel Name
	_
B	C	D	E	F	G
I	J	K	L	M	N
P	Q	R	S	T	U
W	X	Y	Z
				Move	Enter

0~9 Number

Character

Delete

Blank

Done

Return

Sorting the Stored Channels-Analogue

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

1.Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.

Channel

Mini Guide
Default Guide	: Mini Guide
Channel List
Channel Mode	: Added Ch.
Fine Tune
Signal Information

2.Press the ▲ or ▼ button to select a channel, then press the TOOLS button.

3.Press the ▲ or ▼ button to select “Sort”, then press the ENTER button.

4.Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER button.

5.Repeat steps 2 to 4 for another channel to be sorted.

6.Press the EXIT button to exit.

	824			UKTV Gold
Added	825			UKTV style
			1	C --	▲
		A
Channels
		A 3 ♥ C --			Timer Viewing
			2	C --	Add to Favourite
		A			Lock
			4	C --	Edit Channel Name
		A
			5	C --	Sort
		A
			6	C --	Select All
		A
					▼
			7	C --
		A
			8	C --
		A
All	Channel Type			Zoom	Select	Option

Sort

1C --

2C --

3C --

4C --

5C --

6C --

▼

Move

Enter

Return

English - 23