Salter Brecknell MS-50M User Manual

MS-50M BABY SCALE

Specification:

1. Maximum capacity 135lb/62kg

Graduation 1oz/20g

2. Platform size 375x275cm

3. Overall dimension (LxWxH) 530x275x680mm

Installation Instruction:

1

I. Pillar Installation (Fig.2):

1. Upright insert the pillar to the bracket on frame

2. Use the screws and washer to fix the pillar in a vertical position

II. Connect the steelyard rod to long lever (Fig.3):

1. Lay the pillar on a table (Fig.3)

2. Disassemble the wires on the levers.

3. Insert the wrench to the small hole in front of the steelyard rod, and pull the

hook of steelyard rod with the hook of wrench (Fig. 3-1)

4. Push the long lever frontward, then hook the bearing of the steelyard rod on the

pivot of the long lever (Fig. 3-2)

2

5. Take away the wrench form the draft rod (Fig.3-3)

6. Put the scale on ground gently

III. Baby tray installation instruction:

1. Put the baby tray onto the scale platform, and make the fixed scr ew holes on

baby tray and platform in one straight line.

2. Use the screw to fix the baby tray onto the platform.

3. Put the sealing cap to cover the screw holes.

4. Then the baby tray is well fixed.

3

USA

Brecknell

1000 Armstrong Drive

Fairmont MN 56031

Toll Free: 800-637-0529

Tel: [phone]

Fax: [phone]

Email:[e-mail]

www. brecknellscales.com

4

Tel: [phone]

Email: [e-mail]

UK and Europe

Brecknell

Foundry Lane

Smethwick,

West Midlands, B66 2LP.

Fax: [phone]

www. brecknellscales.co.uk