Installation
1-5
Operation Settings Quick usageDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Installation.fm
• Never try to remove any secured panel or cover. The interior of the printer contains
high-voltage circuitry which creates th e da nger of electrical shock when exposed.
• Never try to modify the printer. Doing so creates the danger of fire or electrical shock.
• Never place any heavy objects on the power cord, pull on it or bend it. Doing so creates the
danger of fire or electrical shock.
• Always make sure the printer is not placed on the electrical cord or the communications
cables of any other electrical e quipment. Also make sure that cords and cables do not get
into the printer ’s mechan ism. Any of t he se co nd itio ns c rea te t he da nge r of ma lf uncti on and
fire.
• Always take care so that paper cli ps, staple s, or other sm all pie ces of m etal do no t get int o
the printer through its vents or other openings. Such objects create the danger of fire or elec-
trical shock.
• Do not allow water or other liquids to spill on or near the printer. Fire or electrical shock can
occur should water or liquid com e in to contact with the printer.
• Should liquid or any piece of metal accidently get inside the printer, immediately turn it off,
unplug the power cord, and contact your dealer. Failure to take this immediate action creates
the danger of fire or electrical shock.
• Whenever the printer em its unusually high amounts of h eat, smoke, an unusual odor, or
noise, immediately turn it off, unp lu g it, and co nt act yo ur d ealer. Failure to take this imm e-
diate action creates the d an g er of fire or electrical shock.
Caution - Be sure t o locate the pri nter in a wel l-ventilated lo cation. A mi nimal amount o f
ozone is generated during norm al operati on of this prin ter. Beca use of this, an unpleasant odo r
may result when the printer i s used for extensive printing in a poorly venti lated area. For
comfortable, healthy, and safe operation, be sure to locat e the printer in a well-ventilated area.
,QVWDOOLQJWKHIDFHGRZQWUD\DQGWKHSDSHUWUD\
+ With both hands, gently bend the face-down tray inwards and insert one of its tabs into its
holder on the upper porti on of th e prin ter. Con tinue t o bend the face-do wn tray so that it
curves enough for the second tab to fi t into its holder and release the tray in to position.
LIASSE 23261436-8.book Page 5 Lundi, 11. juin 2001 3:33 15