RSX-965
SURROUND SOUND RECEIVER
SURROUND SOUND RECEIVER RSX-965
POWER
STANDBY
HEADPHONES
SPEAKER
ON/OFF
REMOTE SENSOR
STANDBY
VIDEO1REC
RBPS RDSRT EONTP TAPTY TAPE2M ST TUNED AUTO MEMORY PRESET
VIDEO2
VIDEO 3
VID4AUX
SOURCE
MPEG dts
Digital Pro Logic 3 Stereo DSP MODE 5.1 CH D. RANGE SLEEP
TAPE 2
VIDEO 2VIDEO 1
MONITORTAPE 1TUNERPHONO VIDEO 3CD
SPEAKER
DYNAMIC
RANGESTEREO3 STEREOPRO-LOGIC
SUBWOOFER+–REAR
MODEMENU
OSD
OPTICAL
COAXIAL
1
2
3 4
AUX/
VIDEO 4
VIDEO 5
5.1 CH
VIDEO
VIDEO 1
INPUTDSP
LABELS
REC
CENTER
+–
+–
1 2 3
4 BACK 5 6 ENTER
7 8 9
0
FREQUENCY
DIRECTMEMORY MONO BAND < TUNING >
BASS
Owner’s Manual
MASTER VOLUME
TREBLE BALANCE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR THE USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT. INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU AU FOND.
This symbol is to alert the user to the
presence of uninsulated dangerous
voltages inside the product's enclosure
that may constitute a risk of electric shock.
This symbol is to alert the user to important
operating and maintenance (service)
instructions in this manual and literature
accompanying the product.
ANTENNA GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE INSTRUCTIONS
ARTICLE 810: "RADIO AND TELEVISION EQUIPMENT"
ANTENNA LEAD IN WIRE
GROUND CLAMP
GROUNDING
CONDUCTORS
(NEC SECTION 810-20)
ELECTICAL
SERVICE
BOX
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)
WARNING:
There are no user serviceable parts inside. Refer all servicing to qualified service personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose the unit to moisture
or water. Do not allow foreign objects to get into the enclosure. If the unit is
exposed to moisture, or a foreign object gets into the enclosure, immediately
disconnect the power cord from the wall. Take the unit to a qualified service
person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep
this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the
product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
Keep the ventilation inlets on the unit unobstructed. For example, do not place
the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the unit is placed in a bookcase or cabinet, there must be sufficient
clearance around the unit and ventilation of the cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other
appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage
specified on the rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable in any way.
Do not attempt to defeat grounding and/or polarization provisions. The cable
should be connected to a 2-pin polarized wall outlet, matching the wide blade
of the plug to the wide slot of the receptacle. Do not use extension cords.
Do not route the power cord where it will be crushed, pinched, bent at severe
angles, exposed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left
unused for a long period of time.
Immediately stop using the component and have it inspected and/or serviced
by a qualified service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Place the unit on a fixed, level surface strong enough
to support its weight. Do not place it on a moveable
cart that could tip over.
NOTE TO CATV SYSTEM INSTALLER:
Call the CATV system or antenna installer’s attention to Article 820-40 of the
NEC. This provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the pint of cable entry as practical. See installation diagram.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause interference to radio or TV communications. There is no guarantee that interference
will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can determined by turning the
equipment off and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and the television tuner.
• Connect the unit to an outlet on a different electrical circuit.
• Consult your authorized Rotel retailer for assistance.
Figure 1: Controls and Connections
RSX-965
1
POWER
STANDBY
HEADPHONES
17
2
3
SURROUND SOUND RECEIVER RSX-965
REMOTE SENSOR
STANDBY
VIDEO1REC
VIDEO2
VIDEO 3
VID4AUX
SOURCE
RBPS RDS RT EON TP TA PTY TAPE2M ST TUNED AUTO MEMORY PRESET
MPEG dts
Digital Pro Logic 3 Stereo DSP MODE 5.1 CH D. RANGE SLEEP
TAPE 2
MONITORTAPE 1TUNERPHONO
DYNAMIC
RANGESTEREO3 STEREOPRO-LOGIC
4
VIDEO 2VIDEO 1
SPEAKER
MODEMENU
VIDEO 3CD
7 8 9 10 11 12 13 14 15 16
18
SPEAKER
ON/OFF
19
SUBWOOFER
+–
REAR
20
5.1 CH
INPUTDSP
+–
VIDEO 4
VIDEO
LABELS
OPTICAL
COAXIAL
1
34
CENTER
OSD
2
AUX/
VIDEO 5
VIDEO 1
REC
+–
1 2 3
4 BACK 5 6 ENTER
7 8 9
21
22
5
0
FREQUENCY
DIRECTMEMORY MONO BAND < TUNING >
BASS
TREBLE BALANCE
23
24
MASTER VOLUME
27
2625
6
AM
LOOP
FM
75Ω
37
28
ANTENNA
REMOTE
EXT IN
LR
CENTER
PREOUT
38 4039
30 31 32 33
GND
AC-3/PCM
DIGITAL IN
VIDEO
5.1 CH OUTPUT
5.1 CH INPUT
SUB
WOOFER
PREOUT
EXT
OUT
PRE
OUT
MAIN
REAR
PRE
OUT
IN
AUX
2
3
4
5
PHONO
LR
LR
TAPE1
OUT
TAPE 2
MON
OUT
41
AC
INPUT
SWITCHED
100W MAX
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3629
+
SURROUND RECEIVER
MODEL NO. RSX-965
–
RSX-965
–
+
35
AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
WARNING:TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
34
S-VIDEOCOMPOSITELR
VIDEO 4
VIDEO 3
CD
IN
IN
VIDEO 2
VIDEO 1
PLAY
VIDEO 1
AUX/
VIDEO 5
TV MONITOR
REC
42
SPEAKERS
FRONT
+
R L
–
REAR
–
R L
+
– +
CENTER
SPEAKER IMPEDANCE
8 OHMS MINIMUM
43
3
SURROUND SOUND RECEIVER RSX-965
Figure 2: Remote Control
AUD
SATCDTV
46
47
48
49
50
POWER
BAND
MUTE
T / V
SURROUND + ON SCREEN
GUIDE
TRACK – TRACK +
SEARCH –
UP DOWN
RECALL
OPN/CLS SUR-DELAY
1 2 3
DISC 1 DISC 2 DISC 3 PROG
4 5 6
DISC 4 DISC 5 DISC 6 TIME [REVIEW]
7 8 9
10 0 ENTER
PAUSE
C. DELAY
PLAY
SEL
STOP
DYNAMIC
44
TAPE
VOL
VCR
45
DVD
CBL
CH
MENU
SEARCH +
PRE
MOVIE FILT
5.1 CH
SELECT
CLEAR [SCAN]
BACK
RANDOM [REPEAT]>10
Figure 3: Antenna Connections
ANTENNA
AM
LOOP
FM
75Ω
REMOTE
EXT IN
52
CH
53
54
55
56
LR
CENTER
PREOUT
SUB
WOOFER
PREOUT
EXT
OUT
PRE
OUT
MAIN
REAR
PRE
OUT
5.1 CH OUTPUT
IN
5.1 CH INPUT
51
CD TUNER VIDEO 4
VIDEO 1
M 1 M 2 M 3
[SHIFT]
LIGHT
AUX/V5
VIDEO 2 VIDEO 3TAPE 1 TAPE 2
PHONO
Figure 4: DB25 Connector Pin Assignments
M 4
1312111098765432
RR-939
2524232221201918171615114
123456789101112
57
1 left front
2 center
3 right front
4 subwoofer
5 left surround
6 rear surround
2
4
+
+
14 left front GND
15 center GND
+
16 right front GND
+
17 subwoofer GND
+
18 left surround GND
+
19
right surround GND
14151617181920212223241325
Figure 5: Output Connections
RSX-965
LOOP
75Ω
AM
FM
COMPOSITE
ANTENNA
REMOTE
EXT IN
LR
CENTER
PREOUT
SUB
WOOFER
PREOUT
EXT
OUT
PRE
OUT
MAIN
REAR
PRE
OUT
S-VIDEO
VIDEO INPUTVIDEO INPUT
ROTEL RSX-965
GND
AC-3/PCM
DIGITAL IN
VIDEO
5.1 CH OUTPUT
IN
5.1 CH INPUT
AUX
2
3
4
5
LR
TAPE1
OUT
TAPE 2
MON
OUT
CD
IN
IN
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
VIDEO 1
AUX/
VIDEO 5
TV MONITOR
PLAY
REC
PHONO
LR
S-VIDEOCOMPOSITELR
SPEAKERS
FRONT
+
R L
–
REAR
–
R L
+
+
–
–
+
– +
CENTER
SPEAKER IMPEDANCE
8 OHMS MINIMUM
SURROUND RECEIVER
MODEL NO. RSX-965
RSX-965
AC
INPUT
SWITCHED
100W MAX
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
RCA
FRONT REAR
SURROUND
CENTER
INPUT
RIGHT
FRONT
RIGHT
LEFT
SPEAKERS
CENTER
o
INPUT
DB25
LEFT
AMPLIFIER
POWERED
SUBWOOFER
SUB
SURROUNDFRONT
5
SURROUND SOUND RECEIVER RSX-965
Figure 6: RCA Input Connections
DV D PLAYER
AM
LOOP
FM
75Ω
ANTENNA
REMOTE
EXT IN
LR
CENTER
PREOUT
SUB
WOOFER
PREOUT
EXT
OUT
PRE
OUT
MAIN
REAR
PRE
OUT
DIGITAL OUT
AUDIO OUT
L
R
VIDEO OUT
S-VIDEOCOMPOSITE
CD PLAYER
ANALOG OUTPUT
L
R
ROTEL RSX-965
GND
AC-3/PCM
DIGITAL IN
VIDEO
5.1 CH OUTPUT
IN
5.1 CH INPUT
AUX
2
3
4
5
LR
TAPE1
OUT
TAPE 2
MON
OUT
CD
IN
IN
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
PLAY
VIDEO 1
AUX/
VIDEO 5
TV MONITOR
REC
PHONO
LR
S-VIDEOCOMPOSITELR
SPEAKERS
FRONT
+
+
R L
–
REAR
–
–
–
R L
+
+
– +
CENTER
SPEAKER IMPEDANCE
8 OHMS MINIMUM
SURROUND RECEIVER
MODEL NO. RSX-965
RSX-965
AC
INPUT
SWITCHED
100W MAX
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
WARNING:TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
VCR
L
AUDIO OUT
R
VIDEO IN
L
S-VIDEOCOMPOSITE
R
AUDIO IN
S-VIDEOCOMPOSITE
VIDEO OUT
CASSETTE RECORDER
L
R
L
R
LINE OUTPUT
REC INPUT
OUTBOARD DECODER
FRONT REAR
L
5.1 CH
OUTPUTINPUT
R
6
CENTER
SUBWOOFER
Figure 7: S-Video Input Connections
RSX-965
DVD PLAYER
AM
LOOP
FM
75Ω
ANTENNA
REMOTE
EXT IN
LR
CENTER
PREOUT
SUB
WOOFER
PREOUT
EXT
OUT
PRE
OUT
MAIN
REAR
PRE
OUT
DIGITAL OUT
AUDIO OUT
L
R
VIDEO OUT
S-VIDEOCOMPOSITE
CD PLAYER
ANALOG OUTPUT
L
R
ROTEL RSX-965
GND
AC-3/PCM
DIGITAL IN
VIDEO
5.1 CH OUTPUT
IN
5.1 CH INPUT
AUX
2
3
4
5
LR
TAPE1
TAPE 2
MON
CD
IN
OUT
IN
OUT
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
PLAY
VIDEO 1
REC
AUX/
VIDEO 5
TV MONITOR
PHONO
LR
S-VIDEOCOMPOSITELR
SPEAKERS
FRONT
+
R L
–
REAR
–
R L
+
+
–
–
+
– +
CENTER
SPEAKER IMPEDANCE
8 OHMS MINIMUM
SURROUND RECEIVER
MODEL NO. RSX-965
RSX-965
AC
INPUT
SWITCHED
100W MAX
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR
WARNING:TO REDUCE THE RISK OF FIRE
OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
L
LINE OUTPUT
R
L
REC INPUT
VCR
L
AUDIO OUT
R
VIDEO IN
L
S-VIDEOCOMPOSITE
R
AUDIO IN
S-VIDEOCOMPOSITE
VIDEO OUT
CASSETTE RECORDER
R
OUTBOARD DECODER
FRONT REAR
CENTER
SUBWOOFER
7
5.1 CH
L
OUTPUTINPUT
R
SURROUND SOUND RECEIVER RSX-965
Figure 8: On-Screen Menus
INPUT SELECTOR
Video: DVD
Audio: TUNER
Video REC: DVD
Audio REC: TUNER
5.1Ch Input: OFF
Input Gain: 0dB
Input Source: AUTO
DOWN–selection ENTER–change
BACK-return MENU-screen off
TEST TONE
Front - L
Center 0dB
Front - R
Rear - R 0dB
Rear - L -5dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
BASS LEVEL
MAIN MENU
Input Selector
Surround Mode
Test Tone
Surround Level
Bass Level
Tone/Balance
Setup Menu
DOWN–selection ENTER–change
BACK-return MENU-screen off
SETUP MENU
SURROUND MODE
Mode: DOLBY PRO LOGIC
Delay Time
CENTER: ____
REAR: 20ms
DOWN–selection ENTER–change
BACK-return MENU-screen off
SURROUND LEVEL
Center 0dB
Rear - R 0dB
Rear - L -5dB
Subwoofer 0dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
TONE / BALANCE
Music : +10dB
Theater : +10dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
8
Front: LARGE
Rear: SMALL
Center: LARGE
Subwoofer: ON
Dynamic Range: OFF
Menu Display: SCREEN
Screen Color: BLUE
DOWN–selection ENTER–change
BACK-return MENU-screen off
Bass : +10dB
Treble : +10dB
Balance : L 10
DOWN–selection VOLUME–change
BACK-return MENU-screen off
RSX-965
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Contents
Figure 1: Controls and Connections 3
Figure 2: Remote Control 4
Figure 3: Antenna Connections 4
Figure 4: DB25 Connector Pin Assignments 4
Figure 5: Output Connections 5
Figure 6: RCA Input Connections 6
Figure 7: S-Video Input Connections 7
Figure 8: On-Screen Menus 8
About Rotel _________________________________________ 10
Getting Started _____________________________________ 10
RSX-965 Key Features 10
Unpacking 10
Placement 10
Front Panel: Basic Controls ___________________________ 10
1
Power Switch
Remote Sensor
Front Panel Display
Master Volume Control
Tone Controls
Balance Control
and Standby Switch 2
3
4
6 44
23
24
SUBWOOFER/REAR/CENTER +/– Buttons
Headphone Jack
Speaker Button
MEMORY Button
17
19
21
Front Panel: Input Selection/Recording Controls _______ 11
51
18
Input Source Buttons
55
14
5.1 CH Input
VIDEO 1 REC Button
16
Front Panel: Surround Sound Controls ________________ 12
PRO LOGIC Button
3 STEREO Button
DSP Button
9
STEREO Button
DYNAMIC RANGE Button
7
8
10
11
Front Panel: Tuning Controls _________________________ 13
BAND Button
TUNING Button
NUMERIC Keypad: Station Presets
FREQUENCY DIRECT Button
MONO Button
26 48
27
25
45
5
22
Front Panel: Configuration Controls __________________ 14
12
15
13
52
VIDEO LABEL Button
SPEAKER MODE Button
MENU Button
46
11
11
11
11
11
11
20
11
11
11
11
11
12
12
12
12
13
13
13
13
13
50
14
14
14
14
14
15
RR-939 Remote Control ______________________________ 16
Programming the RR-939 16
POWER Button
VOLUME Buttons
TUNING Button
INPUT SOURCE Buttons
5.1 Button
BAND Button
NUMERIC Buttons
46
44
45
51
55
48
50
MUTE Button (remote only)
MENU button (remote only)
47
52
16
16
16
16
16
16
16
16
16
Rear Panel Connections: Overview ___________________ 17
Rear Panel: Audio Source Connections ________________ 17
32
Phono Inputs
CD Inputs
and Phono Ground
33
Tape Inputs and Outputs
41
31
17
17
17
Rear Panel: Video Source Connections ________________ 17
VIDEO 1 Inputs/Outputs
VIDEO 2 – 5 Inputs
34
Rear Panel: Digital Inputs
5.1 Channel Audio Input
34
40
39
17
18
18
18
Rear Panel Output Signal Connections ________________ 18
Monitor TV Output
Speaker Outputs
RCA Preamp Outputs
EXT OUT Connections
42
43
29
29
5.1 CHANNEL Preamp Outputs
30
18
18
19
19
19
Rear Panel Antenna Connections _____________________ 19
AM Loop Antenna
FM Wire Antenna
28
38
19
19
Rear Panel AC Power Connections ____________________ 20
AC power cord
AC Convenience Outlets
35
36
Remote External Sensor Jack
37
20
20
20
The On-Screen Display and System Configuration _____ 20
MAIN Menu 20
INPUT SELECTOR Menu 20
SURROUND MODE Menu 21
TEST TONE Menu 21
SURROUND LEVEL Menu 22
BASS LEVEL Menu 22
TONE/BALANCE Menu 22
SETUP Menu 23
RSX-965 Specifications ______________________________ 23
9
SURROUND SOUND RECEIVER RSX-965
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
About Rotel
A family whose passionate interest in music led them to manufacture high fidelity components of uncompromising quality founded
Rotel over 30 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional
value for audiophiles and music lovers regardless of their budget,
is shared by all Rotel employees.
The engineers work as a close team, listening to, and fine tuning
each new product until it reaches their exacting musical standards. They are free to choose components from around the world
in order to make that product the best they can. You are likely to
find capacitors from the United Kingdom and Germany, semi conductors from Japan or the United States, while toroidal power
transformers are manufactured in Rotel’s own factory.
Rotel’s reputation for excellence has been earned through hundreds of good reviews and awards from the most respected reviewers in the industry, who listen to music every day. Their
comments keep the company true to its goal - the pursuit of
equipment that is musical, reliable and affordable.
All of us at Rotel, thank you for buying this product and hope it will
bring you many hours of enjoyment.
•
Comprehensive digital and analog input and output connections
for audio and video sources, including digital inputs, composite
video inputs and S-Video inputs
•
AM/FM tuner with 30 station presets, direct access tuning, and
auto-tuning.
•
Programmable remote control to operate the RSX-965 and up to
seven other components.
Unpacking
Remove the unit carefully from its packing. Look for the handheld
remote control and other accessories. Save the packing and box
as it will protect the RSX-965 if you move or need to return it for
maintenance.
Placement
Place the RSX-965 on a solid, dry, level surface away from direct
sunlight, excessive heat, high humidity, or strong vibrations.
Make sure the RSX-965 is close to the other components in your
audio/video system and, if possible, place it on its own shelf. This
will make initial cable routing, hookup, and any subsequent system changes easier. It also minimizes potential interference or
heat buildup from other components.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Getting Started
Thank you for purchasing the Rotel RSX-965 Surround Sound Receiver. The RSX-965 is four products in one:
1. A digital audio/video processor designed to decode Dolby
®
Logic
analog surround signals plus Dolby Digital® and DTS® digi-
tal surround sound signals
2. A full-featured audio/video control center for analog and digital
source components
3. A high-quality AM/FM tuner.
4. A 5-channel power amplifier to drive two front speakers, a center channel speaker, and two rear surround speakers.
RSX-965 Key Features
•
Rotel’s Balanced Design Concept combines advanced circuit
board layout, comprehensive parts evaluation, and extensive listening tests for superior sound and long term reliability.
•
Dolby® Pro Logic® decoding for analog sources
•
Dolby Digital® and DTS® decoding for 5.1 channel digital sources
®
Pro
Make sure there is enough room behind the RSX-965 for easy
hookup. Remember, you are connecting many other components
to this unit and you’ll probably need more space than you think.
Don’t stack other objects (components or other items) on top of
the RSX-965. Don’t let water fall into the RSX-965 as this could
damage delicate circuitry.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Front Panel: Basic Controls
We suggest you look over the RSX-965’s front and rear panels before you start connecting other components to it. The following
explanations will help you get familiar with the units connections,
features, and controls, with number references corresponding to
the illustrations at the front of this manual.
Most functions are duplicated on the front panel and on the
handheld remote control shipped with your unit. A few may be
available only on one or the other. When two reference numbers
appear, one refers to the location of the button on the front panel,
the other to the location of the button on the handheld remote
control.
Note: Front panel controls and displays used for tuning the AM/
FM receiver are described in the next section of this manual.
•
5.1 channel input for outboard adaptor and future upgradeabilty
•
User friendly On-Screen Display with programmable labels for
video components.
10
RSX-965
Power Switch 1 and Standby Switch 2
The RSX-965 has two pushbuttons for powering on and off. The
POWER switch completely shuts down all of the circuitry, similar
in effect to removing the power cord from the AC outlet. The
STANDBY switch deactivates the unit, but preserves power to
some circuits such as those that store memorized circuits. When
in STANDBY mode, a front panel STANDBY LED indicator lights.
The STANDBY Switch is duplicated on the RSX-965's remote.
In normal operation, use the STANDBY switch to deactivate the
unit when you are finished listening and leave the POWER switch
ON at all times. This will preserve memory functions.
Note: The STANDBY switch also controls the rear panel AC convenience outlets. When the RSX-965 is in STANDBY mode, the AC
outlet is also off. When the RSX-965 is fully functional, the AC outlet is live.
Remote Sensor
This sensor receives infrared signals from the handheld remote
control. Make sure you do not accidentally block this sensor with
cables or accessories.
Front Panel Display
3
4
46
SUBWOOFER/REAR/CENTER +/– Buttons
These three pairs of buttons are used to adjust the output level of
the subwoofer channel, the rear surround speakers, and the center channel speaker.
To change the output volume of the subwoofer , press the
SUBWOOFER + or – buttons. To change the output volume of the
rear surround channels press the REAR + or – buttons. To adjust
the output volume of the center channel, press the CENTER + or –
button.
Note: The same adjustments can also be made using the OnScreen menu system and test tones during system setup.
Headphone Jack
This jack accepts a standard 1/4 inch stereo headphone plug. Use
an adaptor if your headphones have the smaller mini-plug.
Speaker Button
This button turns the speaker outputs on and off. Push the button
to activate the internal amplifiers and the speakers connected to
them. Press the button again to deactivate the speakers (for example, to listen to the headphones late at night).
17
19
20
The large flourescent display in the upper portion of the RSX-965
provides status information used in operating the AM/FM receiver
(such as station frequency display, band, preset memory, etc.).
Master Volume Control 6
The MASTER VOLUME control adjusts the level of all output channels simultaneously. Rotate the control clockwise to increase the
volume. Rotate counterclockwise to decrease the volume. MASTER VOLUME buttons are also available on the RSX-965's
handheld remote control.
When you adjust the volume, a digital readout will appear in the
RSX-965 front panel display and an indication of the new setting
will appear on your TV monitor.
Tone Controls
BASS and TREBLE controls increase and decrease the audio
signal’s low and high frequency content, respectively. Rotate
clockwise to increase output in the respective frequency range
and counterclockwise to reduce it. The center detent removes
each control from the audio path for maximum signal integrity. The
front panel display and an on-screen display will show tone control settings as you adjust them.
Balance Control
Turn the BALANCE control clockwise to increase the output level
of the right channel speakers. Turn counterclockwise to increase
the output level of the left channel speakers. The center detent
position removes the control from the circuit and provides equal
output from both left and right channels.
23
24
44
MEMORY Button
The MEMORY button is used to confirm and memorize various settings in the setup and operation of the RSX-965, including tuner
station presets and video source labels. Its use is described in detail in the relevant sections below.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
21
Front Panel: Input Selection/
Recording Controls
Input Source Buttons 18
Ten large front panel buttons directly select an audio or video input source (such as a CD player, the built-in tuner, a tape recorder,
video sources, etc.) for listening. Push any of these buttons (or the
duplicates on the handheld remote) to select the desired source.
You will hear this source and, if you have selected a video source,
see its picture on your TV monitor.
Both the front panel display and the on-screen display will show
the current source selection. These labels can be customized to
match your components (see the VIDEO LABEL button below).
Note: Four video inputs accept analog audio/video signals and
digital signals including Dolby Digital and DTS surround material.
If a digital signal is present when the source is selected, the digital input is automatically activated and the proper surround
choice enabled – unless the automatic sensing has been overridden for that input in the setup procedure described in the section
on System Configuration. If no digital signal is present or if the
auto sensing has been disabled, the analog inputs are selected.
51
11
SURROUND SOUND RECEIVER RSX-965
TAPE MONITOR INPUTS: Two of the INPUT SOURCE buttons have
a special function. The TAPE 1 and TAPE 2 MONITOR buttons activates the analog inputs of a tape monitor loop consisting of a pair
of outputs and a matching set of inputs. Traditionally, this tape
monitor loop has been used to play a tape deck connected to
these inputs or for real time monitoring of a recording in progress
on an audio tape deck. Alternatively, the tape monitor loop could
be used to pass a signal to a graphic equalizer and listen to the
processed signal by pressing the corresponding TAPE MONITOR
button. An indicator appears in the front panel display when TAPE
2 MONITOR is activated.
5.1 CH Input 14
This button overrides all other inputs (both analog and digital) and
directly connects an external digital adaptor to the RSX-965’s
MASTER VOLUME control and outputs. This allows the RSX-965 to
remain the central controller for even the most advanced audio/
video systems and provides an upgrade path to future software
standards. When activated, all of the RSX-965’s inboard Dolby processing is bypassed. An indicator appears in the front panel display and the on-screen display when the 5.1 CH input is activated.
The 5.1 CH button is duplicated on the handheld remote control.
VIDEO 1 REC Button
The RSX-965 permits recording from any source connected to the
VIDEO 2 through 5 inputs to a VCR connected to the VIDEO 1 outputs while allowing simultaneous listening to another input
source. To select a VIDEO INPUT SOURCE for recording, press the
VIDEO 1 REC button. Each time you press the button, one of the
VIDEO INPUT sources will be shown in the front panel display and
selected for recording. For example, the first time you press the
button, VIDEO 2 will be displayed as the recording source, a second press of the button will display VIDEO 3, and so on until you
have cycled through VIDEO 4 and AUX/VIDEO 5 as well. Stop
when you reach the input you wish to record from and its signal
will be available to record on a VCR connected to the VIDEO 1 outputs. Remember, this selection is independent of the listening
source. While recording, you may still select an audio source (for
example, the CD or the TUNER input) for listening.
55
16
Note: The RECORD function requires analog signals. Thus, if you
are using a digital connection from a CD player or DVD for listening, you should also connect an analog signal for recording. See
the section on Rear Panel Input Connections.
Dolby Digital and DTS activation are fully automatic (unless the
auto sensing is disabled during system setup). When a digital signal encoded with either of these surround signals is detected, the
RSX-965 automatically activates the proper decoding. In most
cases, the RSX-965 will also recognize a digital signal encoded
with Dolby Pro Logic for automatic processing.
Additionally, five small buttons allow manual control of the surround sound/ambience settings as described below. Keep in mind
that there are no right or wrong settings. Just because a mode is
labelled STEREO does not mean that you must use this mode every time you play a stereo CD or listen to a stereo FM broadcast.
To the contrary, many people find that they prefer one of the other
surround modes. We have provided a note with each surround
mode description suggesting when the setting may be appropriate
along with alternative settings.
As a general rule, we recommend using PRO LOGIC mode for all
sources labeled Dolby Pro Logic. Beyond that, use whatever settings sound best to you in your room with your system.
Note: Some users understandably find the choice of surround
modes overwhelming, particularly until they have had a chance to
live with the system and experiment for a while. Others simply
prefer “set it and leave it” convenience. In both cases, we recommend PRO LOGIC mode as a satisfactory choice for virtually any
source material.
PRO LOGIC Button
Provides proper playback decoding and processing for any Dolby
Pro Logic encoded surround sound material, whether it be a music CD, videotape, videodisc, conventional stereo TV broadcast, or
radio broadcast. It also can be used successfully to create additional ambience in 2-channel musical source material. Front, center, and rear speakers are activated and an indicator lights in the
front panel display when the PRO LOGIC button is pressed.
7
Note: Many users will find that leaving the RSX-965 in the PRO
LOGIC mode offers the most satisfactory performance and convenience for all source materials. It provides automatic decoding of
analog surround sound material. It allows automatic selection
(unless overridden) of digital processing when a Dolby Digital or
DTS source is played. And, it provides very satisfying surroundsound ambience with musical sources.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Front Panel: Surround Sound
Controls
The RSX-965 is equipped to properly decode Dolby® ProLogic®,
Dolby Digital
as synthesizing several different ambience simulations for musical source material.
12
®
, and DTS® surround sound source material as well
3 STEREO Button
Provides the proper playback of Dolby Pro Logic source material
on systems that have front and center speakers, but lack rear surround speakers. Adds the rear channel signals to the front speakers for a larger, more ambient sound than conventional stereo. An
indicator lights in the front panel display to show that this mode
has been activated.
8
Note: Because 3 STEREO mode includes the subwoofer, if present,
it may be a better option than conventional STEREO (see below)
for 2-channel stereo music recordings when rear surround sound
ambience is not desired.
RSX-965
DSP Button
This button activates digital synthesis of four different ambience
modes (THEATER, HALL, STADIUM, and CHURCH) which simulate
different acoustic environments and are primarily used to recreate ambience when listening to music sources and/or other
sources that lack surround sound encoding. These five modes
vary in the length and type of delay used for the rear surround
channel signals. Experiment to find a setting which is most pleasing for a particular recording or broadcast. Press the button to activate the DSP mode. Each subsequent press of the button will
step forward to the next mode in the following order: THEATER >
HALL > STADIUM > CHURCH. An indicator lights in the front panel
display when DSP mode has been activated.
9
Note: As a general rule, the DSP modes provide more exaggerated ambience effects than playing the same recording in PRO
LOGIC mode, which provides a subtle ambience synthesis on musical recordings. You may prefer PRO LOGIC as your “everyday”
setting, experimenting with the more spectacular DSP modes for
particular recordings or effects.
STEREO Button
Activates conventional 2-speaker stereo direct bypass mode with
no surround sound or other processing. This is “pure” stereo, using the front left and front right speakers only, with no surround
channels, no center channel, and no subwoofer.
When used with Dolby Digital or DTS source material, the STEREO
button engages a “downmix” feature which combines all of the
available channels and sends them to the front speakers only. The
spatial effects of surround sound are lost, but all of the information on the original recording will be heard in 2-channel stereo.
10
Note 1: We provide the STEREO mode as an alternative for those
who want to hear the recording in its original two-channel form,
as if it were being played over a conventional 2-speaker stereo
system. Conversely, many listeners find that they prefer the additional ambience from multi-speaker surround sound processing of
2-channel music recordings. We suggest PRO LOGIC mode for
subtle ambience synthesis or the DSP modes for more spectacular effects. Use the setting that sounds best to you.
Note 2: As noted above, the STEREO mode deactivates the
subwoofer and sends all of the bass information to the two front
speakers. While this provides the most “faithful to the original” reproduction, it may not provide sufficient bass impact for some. A
preferred alternative may be to use one of the other surround
modes for 2-channel recordings. It is also possible to connect
your subwoofer to the extra set of preamp outputs (see EXT OUT
connections) instead of the normal SUB outputs. This will allow
you to hear your subwoofer in STEREO mode, at the possible expense of some “accuracy” in other surround modes.
DYNAMIC RANGE Button
Today’s digital sources are capable of extremely high dynamic
range (the difference between the softest and loudest sounds). In
some cases, the available dynamic range may tax amplifiers and/
or speakers. In other cases, it may be desirable to reduce the dynamic range, for example, when listening at low volume levels.
Pressing the DYNAMIC RANGE button steps through the three
available dynamic range settings:
• OFF (no compression/full dynamic range)
• MID (moderate compression)
• MIN (maximum compression/minimum dynamic range).
An indicator lights on the front panel display to show the current
selection.
11
Note: The DYNAMIC RANGE feature is only available in Dolby
Digital. It is inactive at all other times.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Front Panel: Tuning Controls
The RSX-965 features a digital synthesized AM/FM tuner with 30
station presets. Operation of the tuning functions involves the use
of the numeric buttons immediately to the left of the MASTER
VOLUME knob and five buttons directly below the MASTER VOLUME knob as described below.
BAND Button 26
The BAND button selects whether the tuner is in AM or FM mode.
Press the button to toggle back and forth between AM and FM. A
corresponding indicator will light at the left portion of the front
panel display to confirm your choice and the currently tuned station frequency will be shown.
TUNING Button 27
This is a rocker switch used to change the station frequency up or
down. The TUNING button gives you a choice of two tuning methods: manual and automatic.
To tune manually, press the button quickly and release to increase or decrease the station frequency to the next available
setting, whether or not there is a station broadcasting on that frequency. Use a succession of quick button presses to reach the
desired station.
To tune automatically, press and hold the TUNING button for approximately one second. An AUTO indicator will appear in the
front panel display and the tuner will begin automatically scanning up or down through the frequencies until the next available
station is detected. If this is not the desired station, repeat the automatic tuning procedure to find the next station. Weak stations
will be skipped during auto tuning.
48
45
13
SURROUND SOUND RECEIVER RSX-965
Several indicators in the front panel display assist tuning. A large
display shows the tuned frequency and increases or decreases
during tuning. A signal strength indicator shows the strength of
the incoming signal. A TUNED indicator lights when a sufficiently
strong signal is received. A ST indicator lights when a stereo FM
signal is received.
NUMERIC Keypad: Station Presets 5
The RSX-965 can store up to 30 station presets for recall at any
time using the NUMERIC keypad. To memorize a station:
1. Tune to the desired station, either AM or FM.
2. Press the MEMORY button on the front panel of the RSX-965. A
MEMORY indicator will flash for five seconds in the front panel
display.
3. While the MEMORY indicator is flashing, press the number of
the preset where you wish to store the station frequency. For example, to memorize the station as preset 3, press the 3 button. To
memorize preset 15, press the 1 button followed by the 5 button.
4. A previously stored frequency is erased from memory when a
new frequency is memorized for the same preset number.
To tune to a previously memorized station, just press the preset
number on the NUMERIC keypad. For example, to tune to preset 3,
press the 3 button. To tune to preset 15, press the 1 button and
then press the 5 button.
50
Note: If the TUNER is not already the selected INPUT SOURCE, selecting a station preset will automatically switch to the TUNER input and tune the memorized station.
The NUMERIC keypad buttons can also be used for direct access
tuning (see below). In addition, four of the buttons (
ENTER) are used in navigating the on-screen menu system.
FREQUENCY DIRECT Button
If you know the frequency of the desired station, you may tune it
directly using the FREQUENCY DIRECT button and the NUMERIC
keypad.
22
/ BACK /
MONO Button
The MONO button changes the FM mode from stereo reception to
mono reception. In stereo mode, a stereo signal will be heard if
the station is broadcasting a stereo signal and there is sufficient
signal strength. A stereo indicator will light in the front panel display. In mono mode, a mono signal will be heard even if the station
is broadcasting a stereo signal.
25
Note: Switching to mono mode can be a useful way to improve the
reception of weak or distant FM signals. Less signal strength is
required for clean mono reception than for stereo reception.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Front Panel: Configuration
Controls
VIDEO LABEL Button
You may customize the labels of the VIDEO INPUT SOURCE buttons so that the names of your particular components are displayed in the front panel display and the on-screen display when
selected. For example, you could choose to have DVD displayed in
place of VIDEO 2. Labels may be up to 9 characters long. Inputs
that can be relabelled are VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4,
and AUX/VIDEO 5. To relabel the video inputs:
1. Select the VIDEO INPUT you wish to relabel.
2. Press and hold the VIDEO LABEL button for 3 seconds. The 9
segments of the front panel display turn to bars, each representing one available character. The first bar blinks.
3. Press the TUNING < > buttons repeatedly to step backwards or
forwards through the available characters until you find the first
letter or character in the desired name. Available characters include the 26 letters of the alphabet, the numbers 0 – 9, and nine
special characters. When the desired character is displayed,
press the MEMORY button to move to the next character in the
display. The next segment in the display will blink.
15
1. Press the FREQUENCY DIRECT button to change the NUMERIC
keypad from station preset to Direct Access mode. The station
frequency in the front panel display will change to a series of four
bars, representing the digits of a station frequency, with the first
bar flashing.
2. Enter the first digit of the station frequency using the NUMERIC
keypad. The digit will appear in the frequency display and the second bar will flash. Enter the remaining digits of the frequency.
Note that in FM mode, pressing 1 will enter 10 as the digit in the
frequency display. When all of the digits have been entered, the
tuner will automatically tune to the displayed station frequency.
Examples: FM87.50MHz Press: 8 > 7 > 5 > 0
FM101.90MHz Press: 1 > 1 > 9 > 0
AM1610kHz Press: 1 > 6 > 1 > 0
14
4. Repeat step 3 above until you have entered all nine characters
in the desired video label, including “blanks” for unused
charaters. As soon as you press the MEMORY button following
the ninth character, the new label will be stored.
SPEAKER MODE Button
Home theater speaker systems vary considerably in their size and
performance, particularly in their bass output. For this reason,
today’s surround sound processors feature elaborate logic which
can send thunderous bass information from movie soundtracks to
the speaker(s) best able to handle it – subwoofers and/or large
speakers. For optimum surround sound performance, it is necessary to tell the RSX-965 what speakers your system includes and
what type they are.
13
RSX-965
The following configuration instructions refer to LARGE and
SMALL speakers. The size refers more to the bass performance of
the speaker than its physical size. A full-range speaker that has
extended bass response is considered LARGE. A compact
minispeaker with limited bass response or power handling is considered SMALL.
While understanding the terms LARGE and SMALL is useful, it is
probably more important to understand what these different
speaker types mean in terms of
help determine how you should configure your system. In a nut-
shell, the system will redirect bass information away from
SMALL speakers and send it to the LARGE speakers and/or the
SUBWOOFER in your system.
Things become a little more complex in systems with a subwoofer.
For example, the system will generally not redirect bass information away from a LARGE speaker to the subwoofer and, in fact,
may not even give you a subwoofer option if you tell it you have
LARGE speakers. Thus, the decision you need to make when con-
fronted with a choice of LARGE or SMALL is whether or not you
want the particular speaker to play the deep bass information or
whether your would prefer that the deep bass information be sent
to the subwoofer. If you have invested in a robust, earthquakeready subwoofer for your system, you might very well decide to
send all of the bass to it, regardless of how capable the other
speakers in the system may be. In this case, you would tell the
RSX-965 that all of your speakers are SMALL, without regard to
how big they may actually be.
The following speaker options are available, depending on the
surround mode:
FRONT SPEAKERS (small/large): This menu setting determines
what kind of main front left and right speakers you are using. Use
the LARGE setting if your main left and right speakers are full
range designs with good bass response capability. If you are using minispeakers or if you want the bass from these speakers to
go to a subwoofer instead, use the SMALL setting.
CENTER SPEAKER (small/large/none): Use the LARGE position if
your system’s center channel speaker is capable of full-range, extended bass response. Use the SMALL position if your center
channel speaker has more limited low frequency capability, or if
you prefer that the bass be sent to the subwoofer. Select the
NONE setting if your system does not have a center channel
speaker.
REAR SPEAKERS (small/large/none): If your rear surround speakers are capable of sustained low frequency output , select the
LARGE setting. If your rear speakers have limited bass capability
or if you would prefer that the bass go to a subwoofer, use the
SMALL setting. If your system has no rear surround speakers, select the NONE setting (surround information will be added to the
front speakers).
SUBWOOFER (yes/no): Use the YES setting if your system has a
subwoofer. If your system does not have a subwoofer, select the
NO setting.
system
performance. This will
Note 1: Speaker configuration must be repeated for each different
surround mode you intend to use.
Note 2: The available options during the configuration procedure
depend on the current surround mode setting. For example, in 3STEREO mode, there will be no rear speaker option. In STEREO
mode, there will be no rear, center, or subwoofer option.
Note 3: The available subwoofer options may depend on the settings for the other speakers. For example, in PRO LOGIC, DSP, and
3-STEREO modes, you cannot activate a subwoofer if you select
LARGE front speakers. To activate a subwoofer in these modes,
select SMALL front speakers, regardless of their actual capability.
Note 4: Dolby Digital and DTS modes are automatically activated
based on software codes; there is no manual mode setting. Therefore, to configure the speaker settings for these modes, play a
Dolby Digital or DTS digital recording to activate these modes and
then press the SPEAKER MODE button to configure the speakers.
There are two ways to configure your speaker system. One is the
On-Screen menu system (described later in this manual). The
other method uses the front panel SPEAKER MODE button:
1. Select the desired surround mode with the front panel buttons
or by playing a Dolby Digital or DTS digital source.
2. Press and hold the SPEAKER MODE button for at least 2 seconds to activate the FRONT speaker configuration. An indicator
will appear in the front panel display.
3. Quickly press the SPEAKER MODE button in succession to
toggle through the available options for the FRONT speakers
(large/small). The selection will appear on front panel display.
4. When the correct size configuration for your FRONT speakers
appears, press the MEMORY button to store the setting. This will
automatically take you to the configuration options for the next
type of speaker, for example, the CENTER speaker.
5. Repeat steps 3 and 4, pressing the SPEAKER MODE button
quickly in succession until you reach the desired setting and then
confirm the selection by pressing the MEMORY button. Continue
until you have set the proper configuration for all types of speakers in the current surround mode.
Once complete, you can check the current settings at any time by
briefly pushing the SPEAKER MODE button repeatedly to toggle
through the various speaker settings.
MENU Button 12
Activates the On-Screen Menu system for system setup and configuration. See the section detailing the operation of the OnScreen Menu system below. Press the button to activate the
menu system.
52
15
SURROUND SOUND RECEIVER RSX-965
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RR-939 Remote Control
The RSX-965 includes a handheld remote control that does far
more than operate the RSX-965. The RR-939 is a full-function programmable remote control that can operate up to 8 audio/video
components.
A separate manual, included with the remote, gives detailed information on programming and using the RR-939 to replace all of the
remote controls in your system. This section is intended to provide
only that information which pertains to the use of the RR-939 to
operate the RSX-965.
Note: Many functions duplicate the RSX-965 front panel controls
and are listed here only for your reference. Please refer to the
previous Front Panel Controls section of this manual if you need
additional information.
To operate the RSX-965 with the remote, make sure that the AUDIO mode is active by pressing the AUD button on the remote before you start. If it is active, pressing command keys on the RR-939
will cause the AUDIO button to flash red. Once the AUDIO mode is
active, it will stay active unless you press one of the other DEVICE
buttons to control a different component.
VOLUME Buttons
A pair of buttons which duplicate the function of the front panel
volume control. Press VOLUME UP to increase the volume and
press VOLUME DOWN to decrease the volume.
TUNING Button
A pair of buttons used to change the station frequency up or down
and duplicating the front panel TUNING button.
To tune manually, press the button quickly and release to increase or decrease the station frequency to the next available
setting, whether or not there is a station broadcasting on that frequency. Use a succession of quick button presses to reach the
desired station.
To tune automatically, press and hold the TUNING button for approximately one second. The tuner will begin automatically scanning up or down until the next available station is detected. Weak
stations will be skipped during auto tuning.
INPUT SOURCE Buttons
Two rows of buttons which duplicate the function of the eight INPUT SOURCE buttons on the RSX-965 front panel. Select any input
source by pressing the appropriate button.
44
45
51
Programming the RR-939
The RR-939 is preprogrammed from the factory to operate the
RSX-965. Should the AUDIO command set on your RR-939 not operate the RSX-965, it’s possible that the programming had been
inadvertantly changed. To reprogram the remote to operate the
RSX-965:
1. Press the AUDIO button at the top of the remote while simultaneously pressing the MUTE button and hold both for at least one
second. The AUDIO button will light in red for 20 seconds, indicating that you have entered the program mode. The next step must
be done within this 20 second period, or the RR-939 will revert to
its standard operating mode.
2. Use the NUMERIC buttons to enter the 3-digit code (001) for the
RSX-965 – press 0, then 0, then 1. The AUDIO button will flash
each time you enter a digit.
3. Store the code number by pressing the corresponding AUDIO
button again. The button will blink twice to confirm the storage of
the code in memory.
POWER Button
Duplicates the function of the STANDBY switch on the front panel.
Press to activate the RSX-965. Press again to deactivate. The
main POWER button on the front panel must be in the ON position
for the remote standby function to operate.
46
5.1 Button
Duplicates the 5.1 CH button on the front panel. Selects the 5.1
Channel input, overriding any other source selection.
BAND Button
Duplicates the AM/FM button on the front panel. Toggles between
AM and FM modes.
NUMERIC Buttons
Ten numeric buttons, labeled 0 through 9, duplicate the function of
the NUMERIC keypad on the front panel. Selects memorized station presets.
MUTE Button (remote only)
Push this button once to reduce all output levels to 0 – in other
words, to turn the sound off. A flashing mute indication will appear in the front panel and on screen displays. Press the MUTE
button again to restore previous volume levels.
MENU button (remote only)
Duplicates the function of the front panel MENU button. Push this
button to turn on the on-screen menu system. If the menu system
is already visible, push this button to cancel the Display.
55
48
50
47
52
Note: The RSX-965 On-Screen Display will automatically be turned
off following 20 seconds without any control activity.
16
RSX-965
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Rear Panel Connections: Overview
The RSX-965 provides rear panel connections for five video
sources, three audio sources, and a phono input for use with a
turntable. These connections include standard RCA audio inputs
and outputs, composite video inputs and outputs, S-Video inputs
and outputs, plus digital inputs (coaxial/RCA jack and optical).
The RSX-965 includes speaker connections for the built-in power
amplifiers as well as a full complement of RCA preamp outputs for
use with external amplifiers. In addition, a pair of video output
(composite and S-Video) connect the unit to your TV monitor.
The RSX-965 also includes 25-pin 5.1 channel input and output
connections, a remote IR sensor connection, and antenna connections.
Note: DO NOT plug any system component into an AC source until
system hookup is complete and you are confident that all component-to-component connections have been properly made.
All video cables should have a 75 ohm impedance rating. Although conventional audio interconnects will pass a video signal,
their construction and limited bandwidth impose a performance
penalty because, in part, they do not adhere to the 75 ohm standard. The S/PDIF digital audio interface standard specifies a 75
ohm transmission line and all good digital cables adhere to this
requirement. Because the video and S/PDIF standards are so
close, you can use a video cable for digital audio data transmission. We strongly advise that you NOT substitute a conventional
analog audio interconnect cable for either digital or video.
When making signal connections, make sure that you always
preserve proper channel consistency, i.e. connect LEFT channels
to LEFT channel jacks and RIGHT channels to RIGHT channel
jacks. All RCA-type connections on the RSX-965 follow these
standard color codes:
Left channel audio = RCA jack with white inset
Right channel audio = RCA jack with red inset
Composite video = RCA jack with yellow inset
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Rear Panel: Audio Source
Connections
Connect your audio-only source components to these RCA inputs
and outputs:
Phono Inputs 32 and Phono Ground
Connect the left and right output cables of a turntable to this pair
of RCA inputs. Connect the ground wire from your turntable to the
phono ground lug, labeled GRD.
CD Inputs
Connect the left and right analog outputs from a CD player to the
RCA input jacks labeled CD.
Tape Inputs and Outputs
The RSX-965 provides two sets of audio tape deck connections labeled TAPE 1 and TAPE 2. Each set has a pair of inputs and a pair
of record outputs that allow you to record on either tape deck.
Connect the left and right analog outputs from an audio tape deck
to the TAPE 1 IN input jacks. Connect the TAPE 1 OUT output jacks
to the INPUTS on the audio tape deck.
Connect a second tape deck to the TAPE 2 connections – the outputs of the tape deck to the IN jacks on the RSX-965 and the OUT
jacks on the RSX-965 to the inputs on the second tape deck.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
33
41
31
Rear Panel: Video Source
Connections
There are groups of connections for up to five video source components. Each group includes a pair of RCA analog audio inputs, a
composite video input, and an alternative S-Video input. One
group, VIDEO 1, also includes a set of record outputs (in the same
formats) for sending audio and video signals to a VCR.
VIDEO 1 Inputs/Outputs
Connect your VCR to the VIDEO 1 group of inputs and outputs. This
set of connections allows recording.
Connect the analog audio outputs of the VCR to the VIDEO 1 PLAY
left and right RCA audio jacks. Connect the VIDEO 1 REC left and
right RCA audio output jacks to the analog audio line inputs on the
VCR.
If you have decided to use composite video connections in your
system, connect the RCA composite video output of the VCR to the
RCA composite video input labeled VIDEO 1 PLAY. If you prefer to
use S-Video connections, connect the S-Video output of the VCR
to the VIDEO 1 PLAY S-Video input.
Hookup the VIDEO 1 REC video output (either RCA composite or SVideo) to the video line recording input on your VCR.
34
17
SURROUND SOUND RECEIVER RSX-965
VIDEO 2 – 5 Inputs
These four sets of audio/video inputs allow connection of four additional video components such as a play-only VCR, DVD player,
LaserDisc player, or DSS satellite receiver.
Connect the RCA analog audio outputs of the first video component to the left and right RCA analog audio inputs labeled VIDEO 2.
Then, connect either the RCA composite video or S-Video output
of the video source to the corresponding RCA composite or SVideo connection labeled VIDEO 2.
Repeat for additional video components, using VIDEO 3, VIDEO 4,
and AUX./VIDEO 5.
34
Note: Any of the video source inputs may also be used for an audio-only source. Simply omit the video connection.
Rear Panel: Digital Inputs
The RSX-965 features a complete D/A conversion capability which
accepts digital input signals from source components such as CD
players, satellite TV receivers, and 5.1 channel Dolby Digital or
DTS signals from DVD and Laser Disc players. The D/A automatically senses and adjusts to the correct sampling rates.
These digital inputs are available for VIDEO 2 (coaxial), VIDEO 3
(coaxial), VIDEO 4 (optical), and AUX/VIDEO 5 (optical).
To use the digital inputs, connect the appropriate cable (optical or
coaxial) from the digital output of your source component to the
corresponding DIGITAL INPUT on the RSX-965. Make sure that if
you have connected the analog signals from a source to VIDEO 2,
that you also connect its digital output to VIDEO 2, etc.
Even when using digital connections, you should still make the
analog input connections described above. The analog connection is necessary should you wish to record from that source component to an audio tape deck or VCR.
5.1 Channel Audio Input
40
39
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Rear Panel Output Signal
Connections
This section of the manual provides complete information on the
audio and video signal output connections on the rear panel of the
RSX-965. These are used for routing the output signals to television monitors, audio amplifiers, and recording devices. For convenience, each topic begins with an overview of the particular
connection, followed by detailed hookup instructions.
Monitor TV Output
The video output of the RSX-965 sends the video signal to your TV
monitor. Both RCA composite and S-Video connectors are provided. Simply connect the MONITOR TV output, either RCA composite or S-Video, to an input on your television monitor. Whatever
input source is selected on the RSX-965 will appear on screen.
Speaker Outputs
The RSX-965 has five built-in amplifiers, two for the front (right
and left), one for the center channel, and two for the rear surround speakers (right and left). On the back panel are five pairs of
binding posts, one pair for each speaker, which accept bare wire,
connector lugs, or banana type plug connectors (except in the European Community countries where their use is not permitted).
Each pair of connectors is color-coded for polarity: red for the
positive connection and black for the negative connection. All
speakers and all speaker wire is also marked for polarity. It is essential for proper performance to maintain this polarity at all
speaker connections. Always connect the positive terminal of
each speaker to the corresponding red speaker terminal on the
RSX-965 and the negative speaker terminal to the corresponding
black connector on the RSX-965.
Each pair of connectors is also clearly labeled as FRONT LEFT,
FRONT RIGHT, REAR LEFT, REAR RIGHT, or CENTER. It is equally
essential that you connect the each of the five speakers to the
proper terminal on the RSX-965.
42
43
This female DB25 25-pin input connects six discrete channels of
analog information from an outboard processor in a single cable.
Many external adaptors provide a choice of RCA or DB25 outputs.
We suggest that you use a DB25-to-DB25 cable to reduce the
number of cables and to insure proper channel-to-channel continuity. If your external adaptor does not have a DB25 output, you
will need to purchase a multi-RCA to DB25 adaptor cable from
your authorized Rotel dealer. Make sure to observe proper channel continuity. See Figure 4 for DB25 pin assignments.
18
Route the wires from the RSX-965 to the speakers. Give yourself
enough slack so you can move the components to allow access to
the speaker connectors. If you are using banana plugs, connect
them to the wires and then plug into the backs of the binding
posts. The collars of the binding posts should be screwed in all
the way (clockwise). If you are using terminal lugs, connect them
to the wires. If you are attaching bare wires directly to the binding
posts, separate the wire conductors and strip back the insulation
from the end of each conductor. Be careful not to cut into the wire
strands. Unscrew (turn counterclockwise) the binding post collars. Place the connector lug around the binding post shaft, or insert the bundled wire into the hole in the shaft. Turn the collars
clockwise to clamp the connector lug or wire firmly in place.
Note: Be sure there are no loose wire strands that could touch
adjacent wires or connectors.
RSX-965
RCA Preamp Outputs
The RSX-965 provides a set of RCA preamp audio outputs: one for
a powered subwoofer and five more (FRONT LEFT/FRONT RIGHT/
CENTER/RIGHT REAR/LEFT REAR) that allow you to use external
amplifiers in place of one or more of the built-in amps.
To hook up a powered subwoofer, connect a standard RCA audio
cable from the SUBWOOFER OUTPUT jack to the input on the
subwoofer’s power amp.
To hook up the RCA main audio outputs, connect a standard audio
cable from each output to the input of the amplifier channel that
will power the corresponding speaker. In a full home theater system using external amplifiers for all channels, you will need to
make six different connections corresponding to the six speakers
(left front, center front, right front, left surround, right surround,
and subwoofer).
It is important to make sure that you have the correct output connected to the proper amplifier channel (front right, left rear, etc.).
Take your time.
29
Note: The FRONT LEFT/RIGHT preamp outputs are connected to
power amplifier inputs with metal jumpers in a standard PRE OUT/
MAIN IN configuration. To disable the built-in power amplifiers
and use external amplifiers for the front channels, it will be necessary to remove these jumpers. Save them for future use.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Rear Panel Antenna Connections
The RSX-965 requires two antennas to receive radio signals, one
for AM and one for FM (MW and LW in some countries). Most users will get acceptable reception using the indoor antennas which
are supplied with the RSX-965. Instructions for hooking up these
antennas follow.
Note: If you are located a considerable distance from the radio
transmitters, you may choose to use outdoor antennas to improve
reception. Outdoor antenna systems can be dangerous if they are
not properly grounded and should always be installed by a professional contractor familiar with the electrical code requirements in
your local area.
AM Loop Antenna
The RSX-965 includes a loop antenna to receive AM radio signals.
Remove this antenna from the box and locate it near the RSX-965..
Connect the 300 ohm twin-conductor wire from the loop antenna
to the pair of screw terminals labeled AM LOOP, attaching one
wire to each terminal. It does not matter which wire attaches to
which terminal, but make sure that the connections are solid and
that the two wires do not touch.
28
EXT OUT Connections
The EXT OUT RCA connections are an exact duplicate of the variable level preamp outputs described above. These can be used in
a number of custom system configurations.
5.1 CHANNEL Preamp Outputs
As an alternative to the RCA preamp outputs , the RSX-965 also
provides a male DB25 multi-pin output connector which carries all
six output channels in a single cable. The DB25 output connector
provides exactly the same signal as the RCA outputs, but is more
convenient for use with Rotel, or other, multichannel amplifiers
equipped with a matching DB25 input. Choose whichever is most
convenient for your system hookup.
To use the DB25 output connections, simply connect a female-tomale DB25 audio cable from the output of the RSX-965 to the
matching input on the multichannel power amplifier. See Figure 4
at the front of this manual for DB25 pin assignments.
29
30
You may need to rotate or otherwise reorient the antenna to find
the best position.
Note: To use an outdoor antenna, connect its 300 ohm twin-conductor wire to the G and AM terminals in place of the loop antenna, only after a professional contractor has installed the
antenna system in accordance with local electrical codes.
FM Wire Antenna
The RSX-965 includes a wire antenna to receive FM signals. In
many countries (including the USA), this antenna is a T-shaped
twin-conductor 300Ω antenna. Remove this antenna from the box
and connect its two conductors to the two screw terminals on the
supplied 300Ω to 75Ω adaptor. Connect the coax plug on the converter to the FM 75Ω antenna connector on the RSX-965.
For best reception, unfold the T-shaped wire antenna. There are
eyelets at both ends of the T, which allow tacking the antenna to
wall, if desired. Experiment with positioning for best reception.
In some countries, the RSX-965 may be supplied with a single wire
FM antenna terminated by a 75Ω coax connector. If your unit is
supplied with this antenna, connect it directly to the FM 75Ω antenna connector.
38
Note: To use an outdoor antenna, connect its 75 ohm coax lead
wire (or 300 ohm twin-conductor wire and 300 ohm to 75 ohm
adaptor) to the FM 75
Ω
connector in place of the indoor wire antenna, only after a professional contractor has installed the antenna system in accordance with local electrical codes.
19
SURROUND SOUND RECEIVER RSX-965
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Rear Panel AC Power Connections
AC power cord
Your RSX-965 is configured at the factory for the proper AC line
voltage in the country where you purchased it (either 115 volts AC
or 230 volts AC with a line frequency of either 50 Hz or 60 Hz). The
AC line configuration is noted on a decal on the back of your unit.
Plug the supplied cord into the power receptacle on the back of
the unit.
AC Convenience Outlets
Two outlets let you plug AC cords from source components or
other accessories into the back of the RSX-965 so that they will be
turned on and off automatically. The outlets are powered whenever the RSX-965 is fully active. They are off when the RSX-965 is
in STANDBY mode.
Note: We DO NOT RECOMMEND that you use this outlet for a
power amplifier. Do not exceed the maximum 100 watt capability
of these switched outlets.
Remote External Sensor Jack
This 3.5 mm mini-jack receives command codes from industrystandard infrared receivers (Xantech, etc.) via hard-wired connections. This feature could prove useful when the unit is installed
in a cabinet and the front-panel sensor is blocked. Consult your
authorized Rotel retailer for information on these external repeaters and the proper wiring of a jack to fit the mini-jack receptacle.
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
35
36
37
The On-Screen Display and
System Configuration
The RSX-965 features two on-screen systems to help operate the
system. The first consists of simple status displays that appear on
the TV screen whenever primary settings (Volume, Input, etc.) are
changed. These status displays are self-explanatory.
A more comprehensive On-Screen Menu system is available at
any time by pressing the MENU button on the front panel or the
remote control. This system includes intuitive menus that guide
you through the setup and operation of virtually every function
and setting of your RSX-965 using a few buttons on the front panel
or the remote control:
VOLUME DOWN/UP remote control buttons: To change the current settings for a selected menu choice on some menus in the
On-Screen Menu system.
ENTER Button: To toggle through available settings for a selected
menu choice on some menus.
BACK Button: The BACK button is used to cancel a selection on
an On Screen Menu and return to the previous menu.
Note: There is no need to memorize these buttons. A brief help
system at the bottom of each On-Screen Menu reminds you which
buttons to press. All screens disappear automatically following 20
seconds of inactivity.
Figure 7 at the front of this manual shows the menus that constitute the On-Screen Menu system and how to reach them. Most of
the menus are used to configure the system and will not typically
be used during normal operation. Details of each menu follow:
MAIN Menu
MAIN MENU
Input Selector
Surround Mode
Test Tone
Surround Level
Bass Level
Tone/Balance
Setup Menu
DOWN–selection ENTER–change
BACK-return MENU-screen off
The MAIN menu provides a starting point for reaching all other
screens and menus. This screen is available at any time by pressing the MENU button on the remote control or the front panel. To
go to another menu, move the cursor to the desired line using the
UP/DOWN buttons on the remote or the NUMERIC Keypad front
panel buttons (
) and confirm the selection by pressing the ENTER button. The screen disappears automatically after 20 seconds
of inactivity or by pressing the BACK or ENTER button.
INPUT SELECTOR Menu
INPUT SELECTOR
Video: DVD
Audio: TUNER
Video REC: DVD
Audio REC: TUNER
5.1Ch Input: OFF
Input Gain: 0dB
Input Source: AUTO
MENU Button: To display the MAIN screen. All other menus are
reached from this menu. If a menu is already visible, push this button to cancel the Display.
DOWN/UP remote control buttons or NUMERIC Keypad front
panel buttons (
): To move up and down in the lists that appear
on the On Screen Menu system.
20
DOWN–selection ENTER–change
BACK-return MENU-screen off
The INPUT SELECTOR menu provides status information and configuration options for the source inputs. This screen is available
from the MAIN menu. The screen displays the following status information:
RSX-965
VIDEO: the currently selected video source
AUDIO: the currently selected audio source
VIDEO REC: the currently selected source for VIDEO 1 REC outputs
AUDIO REC: the currently selected source for audio recording,
cannot be independently changed
INPUT GAIN: the gain setting of the current audio source. Adjust
this if the source is noticeable louder or quieter than the other
sources.There are seven options; -3/-6/-9dB reduce the level,
+3/+6/+9dB increase the level.
5.1 CH INPUT: whether or not the 5.1 channel input is active
INPUT SOURCE: AUTO or ANALOG. With the AUTO setting (the
factory default), the selected input source will check first to see if
there is a signal present at the digital inputs. If so, it will play the
digital signal, automatically activating DOLBY DIGITAL or DTS surround processing depending on the source. If no digital signal is
present, the analog inputs will be automatically enabled for that
source. With the ANALOG setting, the automatic sensing is disabled and the system will always revert to the analog inputs. A
digital signal will be ignored even if present and there will be no
DOLBY DIGITAL or DTS processing. Generally, this setting should
be left in the default AUTO mode unless you wish to override the
digital inputs for some reason.
Change any setting by moving the cursor to the desired line using
the UP/DOWN buttons on the remote or the NUMERIC Keypad
front panel buttons (
), adjust the setting using the ENTER buttons. Return to the MAIN menu by pressing the BACK button. Turn
off the On-Screen Display by pressing MENU.
SURROUND MODE Menu
SURROUND MODE
Mode: DOLBY PRO LOGIC
Delay Time
CENTER: ____
REAR: 20ms
DOWN–selection ENTER–change
BACK-return MENU-screen off
soundtrack start in the rear of the room instead of the front. Increase the relative delay to the rear speakers if they are located
closer to the seating area than the front speakers.
Change a setting by moving the cursor to the desired line using
the UP/DOWN buttons on the remote or the NUMERIC Keypad
front panel buttons (
), adjust the setting using the ENTER remote button. Return to the MAIN menu by pressing the BACK button. Cancel the On-Screen Display by pressing the MENU button.
TEST TONE Menu
TEST TONE
Front - L
Center 0dB
Front - R
Rear - R 0dB
Rear - L -5dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
This menu adjusts the relative volume levels of the front, center,
and rear speakers to be equal for proper Dolby Digital and DTS reproduction. For best results, you should perform the test tone calibration in DOLBY DIGITAL surround mode. To do this, you will need
to play a Dolby Digital source so that the RSX-965 can automatically sense it and activate the DOLBY DIGITAL mode. Then, enter
the On-Screen Menu system and select TEST TONE from the
MAIN menu to reach this screen. If you adjust this menu while in
PRO LOGIC mode, only one of the rear adjustments will be available as the two rear speakers share a common signal in PRO
LOGIC mode.
When you enter the TEST TONE menu, you will hear a test tone
coming from the highlighted speaker. Highlight different speakers
by moving the cursor to the desired line using the UP/DOWN buttons on the remote or the NUMERIC Keypad front panel buttons
(
). The test tone will shift accordingly to the selected speaker.
The SURROUND MODE menu provides status information and
configuration options pertaining to the surround operation. This
screen is available from the MAIN menu. The screen displays the
following status information:
MODE: the currently selected surround sound mode (PRO LOGIC,
DSP, 3-STEREO, etc.) Remember that Dolby Digital and DTS are
automatically enabled based on source material encoding and,
therefore, no setting is required.
DELAY TIME (center): the current delay setting for the center
channel speaker; only available in Dolby Digital mode
DELAY TIME (rear): the current delay setting for the rear surround
speakers
In many systems, the factory delay settings will be satisfactory.
However, delay times may need to be adjusted depending on the
relative distance from the listening position to the front and rear
speakers so that you do not hear, for example, an explosion in a
While seated in the normal listening location, switch the test tone
to the various speakers. Using the front speakers as a fixed reference (there is no adjustment for the front), listen to hear if the
center speaker or the rear speakers are noticeably louder or quieter than the front speakers. If so, adjust the speaker’s volume
levels up or down to match the front speakers using the VOL UP/
DOWN remote buttons. Continue switching among the speakers
and adjusting until the center speaker and both of the rear speakers sound as loud as the front speakers.
21
SURROUND SOUND RECEIVER RSX-965
Return to the MAIN menu by pressing the BACK button. Cancel
the On-Screen Display by pressing MENU.
Note to Perfectionists: This calibration will be more accurate if
you use a sound pressure level (SPL) meter to measure the output
of each speaker instead of relying on your ear. SPL meters are
available from electronics stores, or your authorized Rotel dealer
may loan you one. Set the meter to its SLOW response time with
C-weighting and be sure to hold it away from your body. The goal
is to adjust each speaker so that the meter provides the same
reading for each of the speakers in your system.
SURROUND LEVEL Menu
SURROUND LEVEL
Center 0dB
Rear - R 0dB
Rear - L -5dB
Subwoofer 0dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
BASS LEVEL Menu
BASS LEVEL
Music : +10dB
Theater : +10dB
DOWN–selection VOLUME–change
BACK-return MENU-screen off
This menu provides a way to adjust and store different overall
bass output settings, one for music surround modes and one for
theater surround modes. Unlike the front panel bass control, these
settings are intended to be permanent and engaged automatically
each time a music or theater surround mode is selected.
Highlight the desired line of the menu using the UP/DOWN buttons
on the remote or the NUMERIC Keypad front panel buttons (
Using VOL UP/DOWN remote buttons to adjust the setting. Return
to the MAIN menu by pressing the BACK button. Cancel the OnScreen Display by pressing MENU.
).
This menu duplicates the function of the front panel SUBWOOFER/
REAR/CENTER +/– buttons. It adjusts the relative volume level of
the center speaker, rear speakers, and subwoofer. It differs from
the previous TEST TONE menu in that does not use a test tone for
adjustment.
Cycle through the speakers by moving the cursor to the desired
line using the UP/DOWN buttons on the remote or the NUMERIC
Keypad front panel buttons (
), adjusting volume levels up or
down using the VOL UP/DOWN remote buttons. Return to the
MAIN menu by pressing the BACK button. Cancel the On-Screen
Display by pressing MENU.
TONE/BALANCE Menu
TONE / BALANCE
Bass : +10dB
Treble : +10dB
Balance : L 10
DOWN–selection VOLUME–change
BACK-return MENU-screen off
This menu duplicates the functions of the front panel TREBLE,
BASS, and BALANCE controls and provides a method of changing
them with the remote control. Select a line in the menu using the
UP/DOWN buttons on the remote or the NUMERIC Keypad front
panel buttons (
DOWN remote buttons. Return to the MAIN menu by pressing the
BACK button. Cancel the On-Screen Display by pressing MENU.
), then adjust the setting using the VOL UP/
22
RSX-965
SETUP Menu
SETUP MENU
Front: LARGE
Rear: SMALL
Center: LARGE
Subwoofer: YES
Dynamic Range: OFF
Menu Display: SCREEN
Screen Color: BLUE
DOWN–selection ENTER–change
BACK-return MENU-screen off
The SETUP menu provides status information and configuration
options for a variety of system parameters. Some of these settings
duplicate the function of front panel controls.
Note: See the discussion of speaker configuration under the
SPEAKER MODE button heading in the Front Panel Controls section of the manual. Detailed instructions for choosing speaker
types are presented there.
FRONT: whether the front speakers are LARGE (full bass response) or SMALL (limited bass output)
REAR: whether the rear speakers are LARGE, SMALL, or NONE
CENTER: whether the center speaker is LARGE, SMALL, or NONE
SUBWOOFER: whether there is a subwoofer in the system: YES or
NO
DYNAMIC RANGE: whether the dynamic range compression is
turned OFF (full dynamic range/no compression), MID (moderate
dynamic range/moderate compresson), or MIN (minimum dynamic
range/maximum compression)
MENU DISPLAY: determines whether status information will appear on screen when volume, input, or other selections are made
– choices are SCREEN (display on) or OFF (display off).
SCREEN COLOR: selects a background color for the on screen display.
Change any setting by moving the cursor to the desired line using
the UP/DOWN buttons on the remote or the NUMERIC Keypad
front panel buttons (
TER button to step through the choices. Return to the MAIN menu
by pressing the BACK button. Cancel the On-Screen Display by
pressing MENU.
), change the setting by pressing the EN-
○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
RSX-965 Specifications
Audio
Amplifier Power 75 watts per channel
into 8 ohms x 5 chan.
all channels driven, from
20 Hz to 20k Hz,
< 0.05 THD
100 w/ch, 8 ohms,
1kHz, 1% THD, DIN
Frequency Response: 5 Hz - 20 kHz, + 0.5 dB
Signal to Noise Ratio (IHF “A”): 92 dB (Stereo), 70 dB
(Dolby Digital)
Input Impedance: 47 k Ohms
Output Impedance: 500 ohms
Total Harmonic Distortion: 0.05 % (@1 kHz)
Intermodulation Distortion: 0.03 % (400 Hz/7 kHz, 4:1)
Output
Maximum: > 6 volts
Dolby, 200 mV in: 1.1 volt
Video
Frequency Response: 3 Hz-10 MHz, - 3 dB
Signal to Noise Ratio: 45 dB
Input Impedance: 75 ohms
Output Impedance: 75 ohms
Output level (peak to peak): 1 volt
General
Power Consumption: 400 watts
Power Requirements (AC): 115 volts 50/60 Hz or
230 volts 50/60 Hz
Weight: 15 Kg/33 lb.
Dimensions (W x H x D): 450 x 158 x 400 mm
173/4" x 61/4" x 153/4"
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.
DTS is a registered trademark of Digital Theater Systems.
Dolby Pro Logic and Dolby Digital are registered trademarks of the Dolby Licensing Corporation.
23
RSX-965
SURROUND SOUND RECEIVER
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku
Tokyo 150-0045
Japan
Phone: +81 3-5458-5325
Fax: +81 3-5458-5310
Rotel of America
54 Concord Street
North Reading, MA 01864-2699
USA
Phone: +1 978-664-3820
Fax: +1 978-664-4109
Rotel Europe
Meadow Road
Worthing, West Sussex BN11 2RX
England
Phone: +44 (0)1903 524 813
Fax: +44 (0)1903 524 831
Rotel Deutschland
Kleine Heide 12
D-33790 Halle/Westf.
Germany
Phone: +49 05201-87170
Fax: +49 05201-73370
082 OMRSX-965 122998
Loading...