Rotel RSX-1067 Owners manual

The RSX-1067 is the definitive Home Theater surround-sound receiver. It

gets all the elements right with a high capacity power supply built around

a massive toroidal transformer to deliver precise amounts of voltage and

current to all active circuitry. The payoff is in real per formance – in both

brute power and in the sonic subtleties impor tant to the most discerning

audiophile. When driving a multi-channel speaker array, for example, the

RSX-1067 delivers 100 high-current watts from each of its seven amplifi-

ers. Does 5.1 satisfy your surround needs? Then use the remaining

two channels for audio in a second room!

The RSX-1067 has enough inputs and outputs to meet almost any sys-

tem configuration. Custom ID capability lets you program the front panel

display for instant source identification. Assignable digital inputs let you

match the RSX-1067 to your chosen roster of sources. For the audio pur-

ist there’s even a mode that bypasses all digital processing. You’ll even

find 30 AM/FM presets for instant access to your favorite broadcasts.

Advanced microprocessors from Cr ystal Semiconductor handle Dolby

Digital (complete with dynamic range adjustments), Dolby EX, DTS and

Dolby Pro Logic II decoding. The RSX-1067 automatically detects and

decodes DTS ES, DTS ES Discrete, HDCD, and MP3 encoded audio and

provides several music modes for optimum enjoyment of all sources.

Jitter and ripple-free digital-to-analog conversion ensures the highest

sound quality.

Multi-zone, multi-source audio and HDTV video capability? Of course.

Thanks to high performance video switching (with bandwidth over

200MHz!), the RSX-1067 handles three component video sources

and provides a component video output for high resolution monitoring.

Furthermore, internal video transcoding capability means all video sourc-

es, even those with just composite and S-video outputs, will look their

best.

The RSX-1067 boasts a full complement of convenience features, too.

You can specify both turn-on and maximum volume settings, specify

volume control tracking or “speed,” select group delay to accurately synch

video and audio. You’ll benefit from an advanced, comprehensive, yet

simple-to-use speaker set-up menu to tailor your system exactly to your

specifications.

For custom installations, the RSX-1067 includes an RS-232 inter face,

three assignable 12-volt trigger outputs, discrete on/off remote control

command codes, rear panel IR inputs, and a detachable AC power cord.

The fully programmable RR-1050 remote control is standard.

RSX-1067 Surround Sound A/V Receiver

RSX-1067

Home Theater, July 2004

Steve Guttenberg

“...The Rotel’s resolution was

right up there with the ver y

best”.”No doubt, Rotel’s RSX-

1067 can ser ve as the hub of

a ver y fine system. Its upscale

build quality, generous features

set, and engaging performance

may be impossible to beat in

its price class.”

Model
Audio
Continuous Amplifier Power
(Number of channels driven)

Continuous Amplifier Power
(two channels driven)

Total Harmonic Distortion
Intermodulation Distor tion
(60 Hz:7 kHz)
Frequency Response
Analog Bypass
Digital Input
Signal to Noise Ratio
(IHF A-weighted)
Analog Bypass
Digital Input 0 dBFs
(Dolby Digital, dts)

RSX-1067

100 watts/ch (20-20k Hz,
<0.05% THD, 8 ohms)
(Seven Channel Driven)
120 watts/ch (1kHz,
<1.0% THD, 8 ohms, DIN)
(Two Channel Driven)
<0.05 %
<0.05 %

10 Hz - 120 KHz, ± 3 dB
10 Hz - 95 KHz, ± 3 dB

95 dB
92 dB

Input Sensitivity/Impedance
Contour (LF / HF)
Preamp Output Level/Impedance
Decodable Digital Input Signal

Video
Frequency Response

Signal to Noise Ratio
Input Impedance
Output Impedance
Output Level
FM Tuner
Usable Sensitivity
Signal to Noise Ratio (at 65 dBf)
Harmonic Distor tion (at 65 dBf)
Stereo Separation (1 kHz)

Line Level: 200 mV/100K ohms
± 6 dB at 50 Hz / 15 KHz

1.0 V / 1K ohm
Dolby Digital, Dolby Digital EX, DTS, DTS_ES,
DTS96/24, LPCM(up to 192K), HDCD, MP3,
MPEGMultichannel

3 Hz - 10 MHz, ± 3 dB (Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB (Component Video)
45 dB
75 ohms
75 ohms

1.0 Volt

14.2 dBf
70 dBf

0.03%
45 dB

Output level
Antenna Input
AM Tuner
Sensitivity
Signal to Noise Ratio
Output level
Antenna Input
General
Power Consumption:

Power Requirements
(AC)

Dimensions
(W x H x D)
Weight (net)
Front Panel Height
(for rack mount)

1 V
75 ohms unbalanced

500 uV/m
40 dB
500 mV
Loop Antenna

990 watts, Idling
power 130 watts,
Standby 19 watts
115 volts, 60 Hz
(USA version)
230 volts, 50 Hz
(CE version)
433 x 189 x 400 mm
17¹⁄₈ x 7¹⁄₂ x 15³⁄₄”

20.4 kg
176 mm

19