Rotel RSP-1068 Brochure

Description

The RSP-1068 combines exibility, superior performance, and
easy operation. You can connect up to eight sources, ve of them
video-based, plus a CD player, external tuner, and an analog tape
recorder. In addition, there are ve assignable digital audio inputs,
3 coaxial and 2 optical. There’s also a direct analog stereo mode
that bypasses all digital processing.

The RSP-1068 includes inputs and switching/transcoding for ve
composite, ve S-, and three component video sources. Custom ID
capability lets users program the front panel display so it precisely
conrms all of your A/V input selections.

Advanced microprocessors from Crystal Semiconductor handle
Dolby Digital (complete with dynamic range adjustments), Dolby

RSP 1068

7.1 Surround Preamp/Processor

Digital EX, DTS, and Dolby Pro Logic II decoding. The RSP-1068 also
automatically detects and decodes DTS ES, DTS ES Discrete and
Matrix, DTS 24/96, HDCD, and MP3-encoded audio. There’s also
DTS Neo:6 mode for cinema sound and music. Six other DSP modes
(Music 1-4, 5 CH Stereo, and 7 CH Stereo) complement traditional
two-channel stereo operation to make the RSP-1068 more than
suitable for any source.

The RSP-1068 integrates into advanced custom-designed systems
with an RS-232 port, 12-volt “trigger” outputs, discrete on/off remote
control command codes, multi-source/multi-zone operation with
composite video, group delay settings, and a fully programmable
universal remote control.

Specications

Audio

Total Harmonic Distortion <0.008%

Intermodulation Distortion (60 Hz: 7
kHz)

Analog Bypass 10 Hz - 120 KHz, ± 3 dB

Digital Input 10 Hz - 95 KHz, ± 3 dB

Analog Bypass 95 dB

Digital Input 0 dBFs (Dolby Digital, dts) 92 dB

Input Sensitivity/Impedance Line Level: 200 mV/100K ohms

Contour (LF /HF) ± 6 dB at 50 Hz / 15 KHz

Preamp Output Level/Impedance 1.0 V / 1K ohm

Decodable Digital Input Signal Dolby Digital, Dolby Digital EX,

<0.008%

Dolby Prologic IIx, DTS, DTS_ES,
DTS96/24, LPCM (up to 192K),
HDCD, MP3, MPEG Multichannel

The Rotel Co. Ltd.

10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan

Video

Frequency Response 3 Hz - 10 MHz, ± 3 dB

(Composite, S-Video)
3 Hz - 100 MHz, ± 3 dB
(Component Video)

Signal to Noise Ratio 45 dB

Impedance: Input / Output 75 ohms / 75 ohms

Output Level 1.0 Volt

General

Power Consumption 40 watts, Standby 6 watts

Power Requirements (AC) 115 volts, 60 Hz (USA version)

230 volts, 50 Hz (CE version)

Dimensions (W x H x D) 433 x 121 x 334 mm

1

⁄8 x 4 3⁄4 x 13 1⁄8"

17

Weight (net) 7.6 Kg, 16.7 lbs.

Front Panel Height
(for rack mount)

109 mm, 4.3"

www.rotel.com

Rotel of America

54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]

Rotel Europe

Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]