Rosemount 8750W Specifications
Product Data Sheet
00813-0300-4750, Rev CA
February 2018
Rosemount® 8750W Magnetic Flowmeter
System
for Utility, Water, and Wastewater Applications
■ Best in class value with performance, reliability, and diagnostics suited for monitoring applications
■ Reliable all welded coil housing and lightweight sensor design rated to IP68
■ Available in 4–20mA with HART®, Modbus® RS-485, Process Diagnostics, and SMART™ Meter Verification
to improve reliability and performance
■ Available with drinking water certifications
February 2018
Product Selection Guide
The Rosemount 8750W Magnetic Flowmetersensor is available in a flanged style and transmitter is available in remote and integral
transmitter configurations to ensure compatibility with all utility, water, and wastewater applications.
Transmitter selection
Transmitter General characteristics
Field mount
■ Integral and remote configurations available
■ HART/Analog and Pulse outputs available
■ Modbus RS-485 and Pulse output available
■ Advanced Diagnostics available
■ Optical Switch local operator interface (optional)
■ Two discrete channels (optional)
Wall mount
■ Wall mount configuration
■ HART/Analog and Pulse outputs available
■ Modbus RS-485 and Pulse output available
■ Advanced Diagnostics available
■ 15 button tactile key pad and LOI (optional)
■ Two discrete channels (optional)
Contents
Product Selection Guide ...............................................................................................................................................2
Magmeter Diagnostics ................................................................................................................................................. 3
Magnetic Flowmeter Sizing .......................................................................................................................................... 4
Ordering Information ................................................................................................................................................... 7
Product Specifications ................................................................................................................................................18
Product Certifications .................................................................................................................................................32
Dimensional drawings ................................................................................................................................................32
2 www.rosemount.com
February 2018
Sensor selection
Sensor SelectionTable 1:
Sensor General characteristics
Flanged
■ Flanged process connections Welded coil housing
■ ½-in. (15 mm) to 48-in. (1200 mm)
■ Standard, reference, and bullet-nose electrodes available
Selecting materials
For guidance on selecting materials, refer to the Rosemount® Magnetic Flowmeter Material Selection Guide (00816-0100-3033) ,
available at www.emerson.com/rosemount.
Magmeter Diagnostics
Rosemount diagnostics reduce cost & improve output by enabling new practices
Rosemount Magnetic Flowmeters provide device diagnostics that detect and warn of abnormal situations throughout the life of the
meter - from installation to maintenance and meter verification. With Rosemount Magnetic Flowmeter diagnostics enabled, plant
availability and throughput can be improved, and costs through simplified installation, maintenance and troubleshooting can be
reduced.
Magnetic flowmeter diagnosticsTable 2:
Diagnostic name Diagnostic category Product capability
Basic diagnostics
Tunable Empty Pipe Process Standard
Electronics Temperature Meter Health Standard
Coil Fault Meter Health Standard
Transmitter Fault Meter Health Standard
Reverse Flow Process Standard
Coil current Maintenance Standard
Electrode saturation Process/Maintenance Standard
Advanced diagnostics
High Process Noise Process Suite 1 (DA1)
Grounding and Wiring Fault Installation Suite 1 (DA1)
Coated Electrode Detection Process Suite 1 (DA1)
Commanded Smart Meter Verification Meter Health Suite 2 (DA2)
Continuous Smart Meter Verification Meter Health Suite 2 (DA2)
www.rosemount.com 3
Velocity =
Flow Rate
Factor
February 2018
Magnetic flowmeter diagnostics (continued)Table 2:
Diagnostic name Diagnostic category Product capability
4-20 mA Loop Verification
(1) Available with HART output only.
(1)
Installation Suite 2 (DA2)
Options for accessing diagnostics
Rosemount Magmeter Diagnostics can be accessed through the Local Operator Interface (LOI), ProLink® III v3.1, a HART Field
Communicator
diagnostics or for diagnostic availability on existing transmitters.
(1)
, and AMS® Suite: Intelligent Device Manager
(1)
. Contact your local Rosemount representative to activate
Access diagnostics through the LOI for quicker installation, maintenance, and meter verification
Rosemount Magnetic Flowmeter Diagnostics are available through the LOI to simplify maintenance.
Access diagnostics through ProLink III v. 3.0 (HART)/ProLink III v. 3.1 (HART, Modbus)
Simplify maintenance and troubleshooting practices by utilizing ProLink III v3.0/v3.1 to access diagnostics and troubleshooting
information, log variable data, run SMART Meter Verification, and print verification reports.
Access diagnostics through AMS Intelligent Device Manager
The value of the diagnostics increases significantly when AMS Intelligent Device Manager is used. AMS Intelligent Device Manager
provides a simplified screen flow and procedures for how to respond to the diagnostic messages.
(1)
for the ultimate value
Magnetic Flowmeter Sizing
Selecting the appropriate sensor size is an important step when considering a magnetic flowmeter. The physical properties of the
process fluid, as well as the fluid velocity should be considered. It may be necessary to select a flow sensor that is larger or smaller
than the adjacent piping to ensure the fluid velocity is in the recommended flow range for the application.
■ Operation outside these guidelines may also give acceptable performance.
Sizing guidelinesTable 3:
Application Velocity range (ft/s) Velocity range (m/s)
Normal Service 0–39 0–12
Preferred Service 2–20 0.6–6.1
Note
Operation outside these guidelines may also give acceptable performance.
To convert flow rate to velocity, use the appropriate factor listed in Table 4 and the following equation:
(1) Available with HART output only.
4 www.rosemount.com
Velocity =
300 (gpm)
39.679
Velocity = 7.56 ft/s
Velocity =
800 (L/min)
492.78
Velocity = 1.62 m/s
February 2018
Example: English units Example: SI units
Magmeter Size: 4 in. (factor from Table 4 = 39.679) Normal
Flow Rate: 300 GPM
Magmeter Size: 100 mm (factor from Table 4 = 492.78)Normal
Flow Rate: 800 L/min
Line size vs. conversion factorTable 4:
Nominal line sizeInches (mm) Gallons per minute factor Liters per minute factor
½ (15) 0.947 11.762
1 (25) 2.694 33.455
1½ (40) 6.345 78.806
2 (50) 10.459 129.89
2 ½ (65) 14.923 185.33
3 (80) 23.042 286.17
4 (100) 39.679 492.78
5 (125) 62.356 774.42
6 (150) 90.048 1,118.3
8 (200) 155.93 1,936.5
10 (250) 245.78 3,052.4
12 (300) 352.51 4,378.0
14 (350) 421.70 5,237.3
16 (400) 550.80 6,840.6
18 (450) 697.19 8,658.6
20 (500) 866.51 10,761
24 (600) 1,253.2 15,564
30 (750) 2006.0 24,913
36 (900) 2,935.0 36,451
40 (1000) 3,652.1 45,357
42 (1050) 4,115.1 51,107
48 (1200) 5,407.6 67,159
www.rosemount.com 5
Line size vs. velocity/rateTable 5:
Minimum/maximum flow rate
Gallons per minute Liters per minute
February 2018
Nominal
line size in
inches
(mm)
½ (15) 0.038 0.947 2.841 37.287 0.141 3.529 11.76 141.15
1 (25) 0.108 2.694 8.081 106.05 0.401 10.04 33.45 401.46
1½ (40) 0.254 6.345 19.04 249.82 0.946 23.64 78.81 945.67
2 (50) 0.418 10.459 31.38 411.77 1.559 38.97 129.89 1,558.7
2½ (65) 0.597 14.923 44.77 587.51 2.224 55.60 185.33 2,224.0
3 (80) 0.922 23.042 69.13 907.17 3.434 85.85 286.17 3,434.0
4 (100) 1.587 39.679 119.04 1,562.2 5.913 147.84 492.78 5,913.4
5 (125) 2.494 62.356 187.07 2,454.9 9.293 232.33 774.42 9,293.0
6 (150) 3.602 90.048 270.14 3,545.2 13.42 335.50 1,118.3 13,420
8 (200) 6.237 155.93 467.79 6,138.9 23.24 580.96 1,936.5 23,238
10 (250) 9.831 245.78 737.34 9,676.3 36.63 915.73 3,052.4 36,629
12 (300) 14.10 352.51 1,057.5 13,878 52.54 1,313.4 4,378.0 52,535
14 (350) 16.87 421.71 1,265.1 16,603 62.85 1,571.2 5,237.3 62,848
16 (400) 22.03 550.80 1,652.4 21,685 82.09 2,052.2 6,840.6 82,087
18 (450) 27.89 697.19 2,091.6 27,448 103.90 2,597.6 8,658.6 103,903
20 (500) 34.66 866.51 2,599.5 34,114 129.14 3,228.4 10,761 129,137
24 (600) 50.13 1,253.2 3,759.6 49,339 186.77 4,669.2 15,564 186,769
30 (750) 80.24 2,006.0 6,018.0 78,976 298.96 7,474.0 24,913 298,959
36 (900) 117.40 2,935.0 8,805.1 115,553 437.42 10,935 36,451 437,416
40 (1000) 146.09 3,652.1 10,956 143,785 544.29 13,607 45,357 544,286
42 (1050) 164.60 4,115.1 12,345 162,011 613.28 15,332 51,107 613,278
48 (1200) 216.30 5,407.6 16,223 212.898 805.91 20,148 67,159 805,908
at 0.04 ft/s
(low-flow
cutoff)
at 1 ft/s
(min range
setting) at 3 ft/s
at 39.37
ft/s
(max range
setting)
at 0.012
m/s
(low-flow
cutoff)
at 0.3 m/s
(min range
setting) at 1 m/s
at 12 m/s
(max range
setting)
Upstream and downstream piping
To ensure specified accuracy over widely varying process conditions, install the sensor with a minimum of five straight pipe
diameters upstream and two pipe diameters downstream from the electrode plane.
6 www.rosemount.com
February 2018
Upstream and downstream straight pipe diametersFigure 1:
A. Five pipe diameters (upstream)
B. Two pipe diameters (downstream)
C. Flow direction
Installations with reduced upstream and downstream straight runs are possible. In reduced straight run installations, the meter may
not meet absolute accuracy specifications. Reported flow rates will still be highly repeatable.
Sensor grounding
A reliable ground path is required between the sensor and the process fluid. Optional grounding rings or process reference
electrodes are available with 8750W Sensors to ensure proper grounding. See Table 5 and Table 6.
Ordering Information
Rosemount 8750W Magnetic Flowmeter Platform
The Rosemount 8750W Magnetic Flowmeter is available in a flanged sensor design. The sensors are
fabricated from stainless and carbon steel and welded to provide a sealed coil housing that protects
against moisture or other contaminants. Sizes range from 1/2-in. (15 mm) to 48-in. (1200 mm). The
field mount transmitter has a die cast aluminum housing for excellent reliability. The wall mount
transmitter features an easy to use operator interface. Both transmitter styles are available with advanced diagnostics to provide the best insight into the process and the meter's health.
Note
The starred (★) offerings represent the most common options, and should be selected for best delivery.
Model code structure
Example model code with one selection out of each category:
8750W D M T 1 A 1 F P S A 010 C A1 Z5 DA2 AX M4 BD G5 B6 R15 V1 Q4 HR7 WG YF
Requirements - select one from each available choiceTable 6:
Example code Category
8750W Base model—Magnetic Flowmeter System (utility, water, and wastewater)
D Sensor design revision—Revision "D"
M Transmitter class (Table 8)
T Transmitter mount (Table 9)
1 Transmitter power (Table 10)
www.rosemount.com 7
Requirements - select one from each available choice (continued)Table 6:
Example code Category
A Transmitter outputs (Table 11)
1 Conduit entries (Table 12)
F Sensor style (Table 13)
P Lining material (Table 14)
S Electrode material (Table 15)
A Electrode type (Table 16)
010 Line size (Table 17)
C Flange type and material (Table 18)
A1 Flange rating (Table 19)
Options - select only as neededTable 7:
Example code Category
Z5 Hazardous area certifications (Table 20)
DA2 Advanced diagnostics (Table 21)
AX Discrete input/output (Table 22)
M4 Display (Table 23)
BD Certifications (Table 24)
G5 Grounding rings (Table 25)
B6 Miscellaneous (Table 26)
R15 Submergence protection (Table 27)
V1 Special paint (Table 28)
Q4 Quality certificates (Table 29)
HR7 Revision configuration (Table 30)
WG Witness inspection (Table 31)
Yx Quick Start Guide language (Table 32)
February 2018
Requirements
Rosemount 8750W transmitter classTable 8:
Code Description
M Revision 4 electronics ★
0 Spare sensor, no transmitter
Rosemount 8750W transmitter mountTable 9:
Code Description
T Integral field mount ★
R Remote field mount ★
8 www.rosemount.com
February 2018
Rosemount 8750W transmitter mount (continued)Table 9:
Code Description
W Remote wall mount ★
Rosemount 8750W transmitter powerTable 10:
Code Description
1 AC Power Supply (90 -250VAC, 50/60Hz) ★
2 DC Power Supply (12 - 42VDC) ★
0 Spare sensor, no transmitter
Rosemount 8750W transmitter outputsTable 11:
Code Description
A 4-20mA output with digital HART protocol & scalable pulse output ★
M Modbus RS-485 electronics, scalable pulse ★
0 Spare sensor, no transmitter
Rosemount 8750W conduit entriesTable 12:
Code Description Integral mount quantity Remote mount quantity
1 ½–14 NPT 2 4 ★
2 M20 adapters 2 4 ★
(1)
4
(1)
5
0 Spare sensor, integral mount only, no
½–14 NPT, additional entry 3 5
M20, additional entry 3 5
N/A N/A
transmitter
(1) Not available with the wall mount transmitter.
Rosemount 8750W sensor styleTable 13:
Code Description
F Flanged ★
0 Spare transmitter, no sensor
Rosemount 8750W lining materialTable 14:
Code Description
(1)
T
(2)
P
(3)
N
0 Spare transmitter, no sensor
(1) Available in ½ - to 36-in. (15 mm to 900 mm) line sizes.
(2) Available in line sizes 1- to 36-in., 42-in., and 48-in. (25 mm to 900 mm, 1050 mm, and 1200 mm) line sizes.
(3) Available in line sizes 1- to 48-in. (25 mm to 1200 mm) line sizes.
PTFE ★
Polyurethane ★
Neoprene ★
www.rosemount.com 9
February 2018
Rosemount 8750W electrode materialTable 15:
Code Description
S 316L stainless steel ★
H Nickel alloy 276 (UNS N 10276) ★
0 Spare transmitter, no sensor
Rosemount 8750W electrode typeTable 16:
Code Description
A 2 Measurement electrodes – standard ★
(1)
B
2 Measurement electrodes – bulletnose ★
E 2 Measurement electrodes plus 1 reference electrode – standard ★
(1)
F
2 Measurment electrodes plus 1 reference electrode – bulletnose ★
0 Spare transmitter, no sensor
(1) Not available in ½-in. (15mm).
Rosemount 8750W line sizeTable 17:
Liner availability
In this table, the starred (★) offerings represent available liner based
on line size. Consult factory for additional Flange Type/Rating sensor
availability
Code Line size
PTFE code T Poly code P Neoprene code N
005 ½-in. (15 mm) ★
010 1-in. (25 mm) ★ ★ ★
015 1½-in. (40 mm) ★ ★ ★
020 2-in. (50 mm) ★ ★ ★
025 2½-in. (65 mm) ★ ★
030 3-in. (80 mm) ★ ★ ★
040 4-in. (100 mm) ★ ★ ★
050 5-in. (125 mm) ★ ★
060 6-in. (150 mm) ★ ★ ★
080 8-in. (200 mm) ★ ★ ★
100 10-in. (250 mm) ★ ★ ★
120 12-in. (300 mm) ★ ★ ★
140 14-in. (350 mm) ★ ★ ★
160 16-in. (400 mm) ★ ★ ★
180 18-in. (450 mm) ★ ★ ★
200 20-in. (500 mm) ★ ★ ★
240 24-in. (600 mm) ★ ★ ★
300 30-in. (750 mm) ★ ★ ★
360 36-in. (900 mm) ★ ★ ★
400 40-in. (1000 mm) ★
10 www.rosemount.com
February 2018
Rosemount 8750W line size (continued)Table 17:
Liner availability
In this table, the starred (★) offerings represent available liner based
on line size. Consult factory for additional Flange Type/Rating sensor
availability
Code Line size
420 42-in. (1050 mm) ★ ★
480 48-in. (1200 mm) ★ ★
000 Spare transmitter, no sensor
PTFE code T Poly code P Neoprene code N
Rosemount 8750W flange type and materialTable 18:
Code Description (see Table 33 for line size vs. flange type and rating)
C Slip-on,raised-face, carbon steel ★
S Slip-on,raised-face, 304/304L SST ★
F Slip-on, flat-face, carbon steel
G Slip-on,flat-face, 304/304L SST
0 Spare transmitter, no sensor
Rosemount 8750W flange ratingTable 19:
Code Description (see Table 33 for line size vs. flange type and rating)
A1 ASME B16.5, Class 150
A3 ASME B16.5, Class 300
AD AWWA C207Class D; line size 30-in. and above; flat face flange only
AE AWWA C207Class E; line size 30-in. and above; flat face flange only
DD EN1092-1,PN10
DE EN1092-1,PN16
DF EN 1092-1, PN25
DH EN 1092-1, PN40
GD GB/T9119,PN10
GE GB/T9119,PN16
GH GB/T9119,PN40
JP JISB2220, 10K
JR JISB2220, 20K
KU AS4087, PN16
KW AS4087, PN21
KY AS4087, PN35
TK AS2129, Table D
TL AS2129, Table E
00 Spare transmitter, no sensor
www.rosemount.com 11
February 2018
Options
Note
These are not required, but they must be included in the model number if desired.
Rosemount 8750W hazardous area certificationsTable 20:
Code Description
(1)
-
Ordinary Locations - (no code required) ★
Z5 US Approvals, Class I Div 2, Non-Incendive and Dust for Non-Flammable Fluids ★
Z6 Canadian Approvals, Class I Div 2, Non-Incendive and Dust for Non-Flammable Fluids ★
ND ATEX Dust ★
Z1 ATEX Non-Sparking and Dust for Non-Flammable Fluids ★
NF IECEx Dust ★
Z7 IECEx Non-Sparking and Dust for Non-Flammable Fluids ★
Z3 NEPSI Non-Sparking and Dust for Non-Flammable Fluids ★
(1) CSA (C/US) marked, CE marked, EAC marked and C-tick marked.
Rosemount 8750W advanced diagnosticsTable 21:
Code Description
DA1 Process Diagnostics, High Process Noise Detection, Ground/Wiring Fault Detection, and Electrode
Coating
DA2 Smart Meter Verification ★
Rosemount 8750W discrete input/discrete outputTable 22:
Code Description
(1)
AX
(1) Requires Conduit Entry code 4 or 5 when ordered with field mount transmitter.
Two Discrete Channels (DI/DO 1, DO 2) ★
Rosemount 8750W displayTable 23:
Code Description
M4 LCD with Local Operator Interface ★
(1)
M5
(1) Field mount transmitter only.
LCD display only
Rosemount 8750W certificationsTable 24:
Code Description
PD European Pressure Equipment Directive Certification (PED) ★
CR Canadian Registration Number (CRN) Certification
BD ASME B31.3 Process Piping Standard
★
12 www.rosemount.com
February 2018
Rosemount 8750W certifications (continued)Table 24:
Code Description
(1)
DW
(1) NSF drinking water certification is available with the PTFE liner in line sizes 0.5- to 36-in (15 mm to 900 mm) and the polyurethane liner in line
sizes 4-to 36-in., 42-in., and 48-in. (80 mm to 900 mm, 1050 mm, and 1200 mm).
NSF DrinkingWater Certification
Rosemount 8750W grounding ringsTable 25:
Code Description
G1 316L stainless steel (Qty 2) ★
G2 Nickel alloy C-276; UNS N 10276 (Qty 2)
G5 316L stainless steel (Qty 1) ★
G6 Nickel alloy C-276; UNS N 10276 (Qty 1)
Rosemount 8750W miscellaneous Table 26:
Code Description
C1 Custom Configuration (completed CDS form required with order)
D1 High Accuracy Calibration (base ref accuracy 0.25% of rate)
B6 316 SST Mounting Bracket with U-bolt Kit for 2-in. Pipe Mount
(1)
P05
(2)
P10
(1) Available for ½ - to 24-in (15 mm to 600 mm) at velocities 1, 3, 5, 7, 10 ft/s; 30-in. (700 mm) at velocities 1, 3, 5, 7, 9.5 ft/s; 36-in. (900 mm) at
velocities 1, 2, 3, 5,6.5 ft/s;40- to 48-in.(1000mm to 1200mm).
(2) Available for ½ - to 24-in. (15 mm to 600 mm) at velocities 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ft/s; 30- to 48-in. (700 mm to 1200 mm) not available.
5-point verification
10-point verification
Rosemount 8750W submergence protectionTable 27:
Code Description
R05 Potted junction box with 50 feet of combo cable/cable gland
R10 Potted junction box with 100 feet of combo cable/cable gland
R15 Potted junction box with 150 feet of combo cable/cable gland
R20 Potted junction box with 200 feet of combo cable/cable gland
R25 Potted junction box with 250 feet of combo cable/cable gland
R30 Potted junction box with 300 feet of combo cable/cable gland
Rosemount 8750W special paintTable 28:
Code Description
V1 Coal tar paint (submersible/direct burial)
Rosemount 8750W quality certificatesTable 29:
Code Description
Q4 Calibration certificate per ISO 10474 3.1B/EN 10204 3.1
Q8 Material traceability per ISO 10474 3.1B/EN 10204 3.1
www.rosemount.com 13
ASME Class 150
ASME Class 300
AWWA Class D
AWWA Class E
AS4087 PN16
AS4087 PN21
AS4087 PN35
AS2129 Table D
AS2129 Table E
February 2018
Rosemount 8750W revision configurationTable 30:
Code Description
HR7 HART Revision 7
Rosemount 8750W witness inspectionTable 31:
Code Description
WG Witness Inspection
Rosemount 8750W Quick Start Guide languageTable 32:
Code Description
YF French ★
YG German ★
YI Italian ★
YK Korean ★
YM Chinese (Mandarin) ★
YP Portuguese (Brazil) ★
YR Russian ★
YS Spanish ★
Slip on flange options by line sizeTable 33:
Flange code and rating
A1 A3 AD AE DD DE DF DH GD GE GH JP JR KU KW KY TK TL
Size
code
005 ★ ★ ★ ★ ★ ★ ★ ★
010 ★ ★ ★ ★ ★ ★ ★ ★
015 ★ ★ ★ ★ ★ ★ ★ ★
020 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
025 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
030 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
040 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
050 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
060 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
080 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
100 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
120 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
140 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
160 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
14 www.rosemount.com
ASME Class 150
ASME Class 300
AWWA Class D
AWWA Class E
AS4087 PN16
AS4087 PN21
AS4087 PN35
AS2129 Table D
AS2129 Table E
February 2018
Slip on flange options by line size (continued)Table 33:
Flange code and rating
A1 A3 AD AE DD DE DF DH GD GE GH JP JR KU KW KY TK TL
Size
code
180 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
200 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
240 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
300 ★ ★ ★ ★ ★ ★ ★
360 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
400 ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
420 ★ ★
480 ★ ★ ★ ★ ★
www.rosemount.com 15
February 2018
Ordering flowmeter equipment
Ordering procedure
To order, select the desired sensor and/or transmitter by specifying model codes from the ordering table.
For remote transmitter applications, note the cable specification requirements.
Standard configuration
Unless the Configuration Data Sheet is completed, the transmitter will be shipped as follows:
Engineering units: ft/sec
4mA: 0
20mA: 30
Sensor size: 3-in.
Empty pipe: On
Sensor calibration number: 1000005010000000
Integrally mounted transmitters are factory configured with the paired sensor size and appropriate calibration number.
Custom configuration (option code C1)
If Option Code C1 is ordered, the Configuration Data Sheet (CDS) must be submitted at the time of order.
Standard tagging
Instrument tags for the transmitter and sensors are as follows:
■ 316SST laser etched label, permanently attached
■ Main label - Tag name: 1 line 21characters
■ Additional 316SST 'wire-on' tag available: 5 lines, 17 characters per line (6mm height)
Interconnecting cable
Interconnecting cables are required to connect a remote mount transmitter to the sensor. When ordering cable, review the
hazardous area approval requirements and the installation location requirements for proper cable selection.
■ Cables can be ordered as individual component cables or a combination coil drive/electrode cable.
■ Cables can be ordered as part of the transmitter model number or as a spare parts kit. Integrally mounted transmitters are
factory wired and do not require additional interconnecting cables.
■ Individual component cables require equal lengths of coil drive cable and electrode cable and should be limited to less than 500
feet (152 m). Consult Technical Support for lengths between 500-1000 feet (152-304 m).
■ Combination coil drive/electrode cable is only available for Ordinary Locations and should be limited to less than 330 feet (100
m).
Component cable kits
Standard temp (-20 °C to 75 °C)
Cable kit # Description Component Rosemount p/n Alpha p/n
08732-0065-0001
(feet)
08732-0065-0002
(meters)
Kit, Component Cables,
Std Temp, (includes
Coil and Electrode)
Kit, Component Cables,
Std Temp (includes Coil
and Electrode)
Coil 08732-0060-0001 2442C
Electrode 08732-0061-0001 2413C
Coil 08732-0060-0002 2442C
Electrode 08732-0061-0002 2413C
16 www.rosemount.com
Loading...