Rosemount 705 Specifications

00813-0200-4705, Rev BA

Rosemount™ 705 Wireless Totalizing
Transmitter

Product Data Sheet

September 2017

 An installation-ready solution that provides simple connection to a turbine meter or a pulse output device

 Measure average flow and totalized volume

 Flow and volume are continuously measured between wireless updates

 Self-organizing network delivers information rich data with greater than 99 percent data reliability

Rosemount 705 Wireless Totalizing Transmitter

Emerson™ Wireless solutions

September 2017

IEC 62591 (WirelessHART®)... The industry standard

Self-organizing, adaptive mesh routing

 No wireless expertise required, network automatically finds

the best communication paths

 The self-organizing, self-healing network manages multiple

communication paths for any given device. If an obstruction is
introduced into the network, data will continue to flow
because the device already has other established paths. The
network will then lay in more communication paths as needed
for that device.

Emerson’s Wireless

Reliable wireless architecture

 Standard IEEE 802.15.4 radios

 2.4 GHz ISM band sliced into 15 radio-channels

 Time Synchronized Channel Hopping to avoid interference

from other radios, Wi-Fi, and EMC sources and increase
reliability

 Direct sequence spread spectrum (DSSS) technology delivers

high reliability in challenging radio environment

Contents

Emerson™ Wireless solutions . . . . . . . . . . . . . . . . . . . . . . . 2

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SmartPower™ solutions

 Optimized Emerson instrumentation, both hardware and

software, to extend power module life

 Intrinsically safe power module allows field replacements

without removing the transmitter from the process, keeping
personnel safe, and reducing maintenance costs

Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2

Emerson.com/Rosemount

September 2017

Rosemount 705 Wireless Totalizing Transmitter

Ordering Information

Table 1. Rosemount 705 Wireless Totalizing Transmitter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject
to additional delivery lead time.

Product description

705 Totalizing Transmitter (with connector mil-c-5015) ★

Transmitter outpu t

X Wireless ★

Transmitter type

D1 Direct mount ★

R1 Remote mount (10 ft. leads included) ★

Housing

D Dual compartment housing - aluminum ★

E Dual compartment housing - SST ★

Conduit threads

1

1

/2–14 NPT ★

Certifications

I5 U.S.A Intrinsically Safe ★

I6 Canada Intrinsically Safe ★

N5 U.S.A. Division 2, Non-incendive ★

N6 Canada Division 2, Non-incendive ★

I1 ATEX Intrinsic Safety ★

IU ATEX Intrinsic Safety for Zone 2 ★

I7 IECEx Intrinsic Safety ★

IY IECEx Intrinsic Safety for Zone 2 ★

Wireless options

Wireless update rate, operating frequency and protocol

WA3 User configurable update rate, 2.4 GHz DSSS, IEC 62591 (WirelessHART) ★

Omni directional wireless antenna and SmartPower solutions

WK1 External antenna, adapter for black power module (I.S. Power module sold separately) ★

(1)

WM1 Extended range, external antenna, adapter for black power module (I.S. Power module sold separately) ★

WJ1 Remote antenna, adapter for black power module (I.S.Power module sold separately)

(2)

WN1

High-gain, remote antenna, adapter for black power module (I.S. Power module sold separately)

Emerson.com/Rosemount

3

Rosemount 705 Wireless Totalizing Transmitter

Table 1. Rosemount 705 Wireless Totalizing Transmitter Ordering Information

The starred offerings (★) represent the most common options and should be selected for best delivery. The non-starred offerings are subject
to additional delivery lead time.

September 2017

Other options (Include with selected model number)

Display

M5 LCD display ★

Mounting bracket

B4 Universal L mounting bracket for 2-in. pipe mounting - SST bracket and bolts ★

Configuration

C1

Calibration factor (k-factor) configuration (factory configure date, descriptor, message fields, and wireless
parameters)

Typical model number: 705 X D1 D 1 I6 WA3 WM1 M5 C1

1. Black Power Module must be shipped separately, order model 701PBKKF or part number 00753-9220-0001.

2. Limited availability, consult factory for details.

Spare parts and accessories

Table 2. Spare Parts and Accessories

Spare parts and accessories

00705-9000-0001 Cable is only 9-in. long

00705-9000-0002 Cable assembly, 10 ft. long for remote mount option

03151-9270-0003 Remote housing bracket kit

701PBKKF Black power module

★

4

Emerson.com/Rosemount

September 2017

Specifications

Rosemount 705 Wireless Totalizing Transmitter

Functional specifications

Wireless output

IEC 62591 (WirelessHART) 2.4 GHz DSSS

Radio frequency power output from antenna

External (WK option) antenna:
Maximum of 10 mW (10 dBm) EIRP

Extended range, External (WM option) antenna:
Maximum of 18 mW (12.5 dBm) EIRP

High Gain, Remote (WN option) antenna:
Maximum of 40 mW (16 dBm) EIRP

Remote (WJ option) antenna:
Maximum of 17 mW (12.3 dBm) EIRP

Local display

The optional integral LCD can display totalized volume, average
flow rate, and diagnostic information. Display refresh at each
wireless update, option to have the display always on.

Humidity limits

0–99 percent relative humidity

Wireless update rate

User selectable, one second to 60 minutes

Flow rate accuracy

Flow rate accurate of better than ±0.01 percent of reading at
reference conditions
pickup).

(1)

(excluding turbine meter and magnetic

Physical specifications

Electrical connections

Wireless power module

Replaceable, intrinsically safe lithium-thionyl chloride power
module with PBT polymer enclosure. Ten year life at reference
condition

Wiring terminals

Screw terminals fixed to terminal block

Field Communicator connections

Communication terminals clips permanently fixed to terminal
block.

Materials of construction

Enclosure

Housing: Low-copper aluminum, or stainless steel
Paint: Polyurethane
Cover O-ring: Buna-N

Terminal block

PBT

Antenna

PBT/PC integrated omni directional antenna

Conduit entries

1

/2–14 NPT

Weight

(2)

.

Totalization accuracy

Totalization accurate of better than ±0.01 percent of reading at
reference conditions
pickup).

1. Reference conditions are 70 °F (21 °C), for frequency 170Hz to 10khz.

Emerson.com/Rosemount

(1)

(excluding turbine meter and magnetic

Low-copper aluminum:
705 without LCD display - 4.6 lb (2.0 kg)
705 with M5 LCD display - 4.7 lb (2.1 kg)

Stainless steel:
705 without LCD display - 8.0 lb (3.6 kg)
705 with M5 LCD display - 8.1 lb (3.7 kg)

Enclosure ratings

NEMA® 4X and IP66/67

Mounting

Transmitters may be attached directly to pulse output device or
turbine meters. Brackets also permit remote mounting. See

“Dimensional drawings” on page 10.

2. Continuous exposure to ambient temperature limits (-40 °F or 185 °F)
(–40 °C or 85 °C) may reduce specified power module life by less than 20
percent and routing data for three additional network devices.

5

Rosemount 705 Wireless Totalizing Transmitter

Performance specifications

Electro Magnetic Compatibility (EMC)

All models

Meets all industrial environment requirements of EN61326 and
NAMUR NE-21. Maximum deviation less than 1 percent span
during EMC disturbance

Vibration effect

Wireless output unaffected when tested per the requirements of
IEC60770-1 field or pipeline with high vibration level (10–60 Hz

0.21 mm displacement peak amplitude/60–2000 Hz 3 g).

Temperature limits

Description Operating limit Storage limit

(1)

.

September 2017

Without LCD display

With LCD display

–40 to 185 °F

–40 to 85 °C

–4 to 175 °F
–20 to 80 °C

–40 to 185 °F

–40 to 85 °C

–40 to 185 °F

–40 to 85 °C

Input parameter

One input channel available. The device operates at pulse inputs
from 3–10,000 Hz and at a minimum sensitivity of 10 mV and
maximum sensitivity up to 42.2 V.

Output parameter

The device will output specified average pulse (flow) rate and
total pulse accumulation (volume) by user-selected units based
on the calibration factor of the pulse input device or the k-factor.

Calibration factor or k-factor

The device requires a calibration factor that can be input via a

®

hand held, AMS Device Manager or factory inputs

HART
(requires C1 option). The k-factor is typically supplied by the
manufacturer of the pulse generation source.

1. During surge event device may exceed maximum EMC deviation limit or
reset; however, device will self-recover and return to normal operation
within specified start-up time.

6

Emerson.com/Rosemount

September 2017

Product Certifications

Rev 1.1

Rosemount 705 Wireless Totalizing Transmitter

European Directive Information

A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at

Emerson.com/Rosemount

.

Telecommunication Compliance

All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product certification.

Emerson is working with governmental agencies around the
world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device
usage.

FCC and IC

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.

Ordinary Location Certification from CSA

The transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire
protection requirements by CSA, a nationally recognized test
laboratory (NRTL) as accredited by the Federal Occupational
Safety and Health Administration (OSHA).

Installing in North America

The US National Electrical Code® (NEC) and the Canadian
Electrical Code (CEC) permit the use of Division marked
equipment in Zones and Zone marked equipment in Divisions.
The markings must be suitable for the area classification, gas,
and temperature class. This information is clearly defined in the
respective codes.

USA

I5 U.S.A. Intrinsically Safe (IS)

Certificate: CSA 70011131
Standards: FM 3600 – 2011, FM 3610 – 2010,

UL Standard 50 – Eleventh Edition,
UL 61010-1 – 3
ANSI/ISA-60079-0 (12.00.01) – 2013,
ANSI/ISA-60079-11 (12.02.01) – 2013,
ANSI/IEC 60529 – 2004

Markings: IS CL I, DIV 1, GP A, B, C, D T4; Class 1, Zone 0,

AEx ia IIC T4 Ga; T4 (–50 °C ≤ T
installed per Rosemount drawing 00705-1020;
Type 4X; IP66

See the table at the end of this section for entity
parameters.

N5 U.S.A. Division 2, Nonincendive

Certificate: CSA 70011131
Standards: FM 3600 – 2011, FM 3611 – 2004,

UL Standard 50 – Eleventh Edition,
UL 61010-1 (3
ANSI/IEC 60529 – 2004

Markings: NI CL I, DIV 2, GP A, B, C, D T4;

T4 (–50 °C ≤ T
Type 4X; IP66

Special Conditions for Safe Use (X):

1. For use only with the Model 701P or Rosemount P/N
753-9220-XXXX Smart Power Battery Module.

2. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

rd

Edition,

rd

Edition),

≤ +70 °C);

a

≤ +70 °C) when

a

Canada

I6 Canada Intrinsically Safe (IS)

Certificate: CSA 70011131
Standards: CAN/CSA C22.2 No. 0-10,

CAN/CSA C22.2 No. 94-M91,
CSA Std C22.2 No.142-M1987,
CAN/CSA-60079-0 - 2011,
CAN/CSA-60079-11 - 2014,
CSA Std C22.2 No. 60529 - 2005,
CAN/CSA-C22.2 No. 61010-1 - 2012

Markings: IS CL I, DIV 1, GP A, B, C, D T4;

Ex ia IIC T4 Ga, T4; T4 (-50 °C ≤ T
when installed per Rosemount drawing
00705-1020; Type 4X; IP66

See the table at the end of this section for entity
parameters.

≤ +70 °C)

a

Emerson.com/Rosemount

7

Rosemount 705 Wireless Totalizing Transmitter

September 2017

N6 Canada Division 2, Nonincendive

Certificate: CSA 70011131
Standards: CAN/CSA C22.2 No. 0-10,

CAN/CSA C22.2 No. 94-M91,
CSA Std C22.2 No. 213-M1987 (R2013),
CAN/CSA-60079-0 - 2011,
CAN/CSA Std C22.2 No. 60529 - 2005,
CAN/CSA-C22.2 No. 61010-1 - 2012

Markings: Suitable for Class 1, Division 2,

Groups A, B, C, D T4;
T4 (–50 °C ≤ T
Type 4X; IP66

Special Conditions for Safe Use (X):

1. For use only with the Model 701P or Rosemount P/N
753-9220-XXXX Smart Power Battery Module.

2. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

≤ +70 °C);

a

Europe

I1 ATEX Intrinsic Safety

Certificate: Baseefa14ATEX0375X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings: II 1 G Ex ia IIC T4 Ga, T4(–60 °C ≤ T

For use with Rosemount SmartPower power module part
number 753-9220-0001, or for use with Emerson
SmartPower option 701PBKKF.

See the table at the end of this section for entity
parameters.

Special Conditions for Safe Use (X):

1. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

2. The Model 701PBKKF Power Module may be replaced in a
hazardous area. The Power Modules have a surface
resistivity greater than 1 GΩ and must be properly
installed I the wireless device enclosure. Care must be
taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.

3. The 705 enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in a Zone 0 area.

IU ATEX Intrinsic Safety for Zone 2

Certificate: Baseefa15ATEX0059X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings: II 3 G Ex ic IIC T4 Gc, T4(-60 °C ≤ T

For use with Rosemount SmartPower power module part
number 753-9220-0001, or for use with Emerson
SmartPower option 701PBKKF.

See the table at the end of this section for entity
parameters.

≤ +70 °C)

a

≤ +70 °C)

a

Special Conditions for Safe Use (X):

1. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

2. The Model 701PBKKF Power Module may be replaced in a
hazardous area. The Power Modules have a surface
resistivity greater than 1 GΩ and must be properly
installed I the wireless device enclosure. Care must be
taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.

3. The 705 enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in a Zone 0 area.

International

I7 IECEx Intrinsic Safety

Certificate: IECEx BAS 14.0173X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia IIC T4 Ga, T4 (–60 °C ≤ T

For use with Rosemount SmartPower power module part
number 753-9220-0001, or for use with Emerson
SmartPower option 701PBKKF.

See the table at the end of this section for entity
parameters.

Special Conditions for Safe Use (X):

1. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

2. The Model 701PBKKF Power Module may be replaced in a
hazardous area. The Power Modules have a surface
resistivity greater than 1 GΩ and must be properly
installed I the wireless device enclosure. Care must be
taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.

3. The 705 enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in a Zone 0 area.

IY IECEx Intrinsic Safety for Zone 2

Certificate: IECEx BAS 14.0173X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ic IIC T4 Gc, T4 (–60 °C ≤ T

For use with Rosemount SmartPower power module part
number 753-9220-0001, or for use with Emerson
SmartPower option 701PBKKF.

See the table at the end of this section for entity
parameters.

≤ +70 °C)

a

≤ +70 °C)

a

8

Emerson.com/Rosemount

September 2017

Special Conditions for Safe Use (X):

1. The surface resistivity of the antenna is greater than 1 GΩ.
To avoid electrostatic charge build-up, it must not be
rubbed or cleaned with solvents or a dry cloth.

2. The Model 701PBKKF Power Module may be replaced in a
hazardous area. The Power Modules have a surface
resistivity greater than 1 GΩ and must be properly
installed I the wireless device enclosure. Care must be
taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.

3. The 705 enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in a Zone 0 area.

4.

Brazil

I2 INMETRO Intrinsic Safety

Certificate: UL-BR 17.0019X
Standards: ABNT NBR IEC 60079-0:2008 + Errata 1:2011,

ABNT NBR IEC 60079-11:2009

Markings: Ex ia IIC T4 Ga, T4 (–60 °C ≤ T

table at the end of this section for entity
parameters.

≤ +70 °C); See the

a

Rosemount 705 Wireless Totalizing Transmitter

Special Condition for Safe Use (X):

1. See certificate for special conditions.

EAC - Belarus, Kazakhstan, Russia

IM Technical Regulation Customs Union (EAC) Intrinsic Safety

Certificate: TC RU C-US.MIO62.B.03122

max/Ui

max/Ii

max/Pi

≤ +70 °C);

a

= 10 V

= 1 mA

= 1 mW

Markings: 0Ex ia IIC T4 Ga X, T4 (–60 °C ≤ T

See the table at the end of this section for entity

parameters.

Special Condition for Safe Use (X):

1. See certificate for special conditions.

Turbine meter terminal

Turbine meter terminal

output parameters

Voc/Uo = 2.5 V V

Isc/Io = 253 μA I

P

= 640 μW P

max/Po

Ca/Co = 2.9 μF Ci = 2.2 nF

La/Lo= 500 mH Li = 4.7 mH

input parameters

Emerson.com/Rosemount

9

Rosemount 705 Wireless Totalizing Transmitter

1.50 [38]

A

D

B

C

2.49 [63]

4.20 [107]

7.81 [198]

11.16 [284]

E

7.88 [200]

F

0.42 [11]

6.05 [154]

Dimensional drawings

Figure 1. Rosemount 705 Transmitter

Shown with 2.4 GHz/extended range antenna

September 2017

Shown with optional digital display

and 2.4 GHz/antenna

A. 2.4 GHz/extended range antenna
B. 1-in. NPT connection to flow meter
C. Ground screw assembly

Dimensions are in inches (millimeters).

Shown without optional digital display

D. Possible antenna rotation
E. Digital display cover
F. Tr an sm itter ele ct ro nic s

10

Emerson.com/Rosemount

September 2017

D

1.03 [26]

4.03 [102]

C

1.38[35]

B

A

Rosemount 705 Wireless Totalizing Transmitter

Figure 2. Rosemount 705 Transmitter Mounting Configurations with Optional Mounting Bracket

A. Pipe mounting
B. 2-in. U-bolt for pipe mounting
C. Ground screw assembly

Dimensions are in inches (millimeters).

D.1-in. NPT connection to flow meter
E. Turbine meter connection

Emerson.com/Rosemount

11

Rosemount 705 Wireless Totalizing Transmitter

00813-0200-4705, Rev BA

Global Headquarters

Emerson Automation Solutions

6021 Innovation Blvd.
Shakopee, MN 55379, USA

[phone] or [phone]
[phone]
[e-mail]

North America Regional Office

Emerson Automation Solutions

8200 Market Blvd.
Chanhassen, MN 55317, USA

[phone] or [phone]
[phone]
[e-mail]

Latin America Regional Office

Emerson Automation Solutions

1300 Concord Terrace, Suite 400
Sunrise, FL 33323, USA

[phone]
[phone]
[e-mail]

Product Data Sheet

September 2017

Europe Regional Office

Emerson Automation Solutions Europe GmbH

Neuhofstrasse 19a P.O. Box 1046
CH 6340 Baar
Switzerland

[phone]
[phone]
[e-mail]

Asia Pacific Regional Office

Emerson Automation Solutions Asia Pacific Pte Ltd

1 Pandan Crescent
Singapore 128461

[phone]
[phone]
[e-mail]

Middle East and Africa Regional Office

Emerson Automation Solutions

Emerson FZE P.O. Box 17033
Jebel Ali Free Zone - South 2
Dubai, United Arab Emirates

[phone]
[phone]
[e-mail]

Linkedin.com/company/Emerson-Automation-Solutions

Twitter.com/Rosemount_News

Facebook.com/Rosemount

Youtube.com/user/RosemountMeasurement

Google.com/+RosemountMeasurement

Standard Terms and Conditions of Sale can be found on the Ter ms a nd

Conditions of Sale page.

The Emerson logo is a trademark and service mark of Emerson Electric
Co.
SmartPower, Rosemount, and Rosemount logotype are trademarks of
Emerson.
HART and WirelessHART are registered trademarks of FieldComm Group.
NEMA is a registered trademark and service mark of the National
Electrical Manufacturers Association.
National Electrical Code is a registered trademark of National Fire
ProtectionAssociation, Inc.
All other marks are the property of their respective owners.

© 2017 Emerson. All rights reserved.