Rockwell Automation 20Y User Manual

Installation Instructions

PowerFlex® 700AFE Spare Parts

ATTENTION: To avoid an electric shock hazard, verify that the
voltage on the bus capacitors has discharged completely before

!

servicing. Check the DC bus voltage between the DC+ and DC­terminals, between the +DC terminal and the chassis, and between
the -DC terminal and the chassis. The voltage must be zero for all
three measurements.

ATTENTION: The PowerFlex 700AFE contains ESD
(Electrostatic Discharge) sensitive parts and assemblies. Static

!

control precautions are required when installing, testing, servicing
or repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, refer to Allen-Bradley publication
8000-4.5.2, “Guarding Against Electrostatic Damage” or any
other applicable ESD protection handbook.

Finding Specific Information

ATTENTION: An incorrectly applied or installed PowerFlex
700AFE can result in component damage or a reduction in product

!

life. Wiring or application errors, such as undersizing the motor,
incorrect or inadequate AC supply, or excessive ambient
temperatures may result in malfunction of the system.

ATTENTION: Only qualified personnel familiar with active
front ends, adjustable frequency AC drives, and associated

!

machinery should plan or implement the installation, start-up, and
subsequent maintenance of the system. Failure to comply may
result in personal injury and/or equipment damage.

Depending on the PowerFlex 700AFE frame size, installation information
for this kit can be found in one of the following publications:

• PowerFlex 700AFE Frame 10 Hardware Service Manual
(publication 20Y-TG001)

• PowerFlex 700AFE Frame 13 Hardware Service Manual
(publication 20Y-TG002)

You can view or download these publications at http://

literature.rockwellautomation.com

Rockwell Automation Support

Before you contact Rockwell Automation for technical assistance, we
suggest you please review the troubleshooting information contained in the
supporting product publications first (for example, Hardware Service
Manual, Installation Instructions, User Manual, etc.).

If the difficulty persists, call your local distributor or contact Rockwell
Automation in one of the following ways:

Phone United States/

Canada

Outside United
States/Canada

Internet Go to http://www.ab.com/support/abdrives/

E-mail [e-mail]

Be prepared to provide the following information when you contact
support:

• Product Catalog Number

• Product Serial Number

• Firmware Revision Level

1.262.512.8176 (7 AM - 6 PM CST)

1.440.646.5800 (24 hour paid support available
through the TechConnect Support Program)

You can access the phone number for your country via
the Internet:
Go to http://www.ab.com
Click on Support
(http://support.rockwellautomation.com/)
Under Contact Customer Support, click on Phone

Support

U.S. Allen-Bradley Drives Technical Support - Tel: [phone], Fax: [phone], Email: [e-mail], Online: www.ab.com/support/abdrives

www.rockwellautomation.com

Power, Control and Information Solutions Headquarters

Americas: Rockwell Automation, 1201 South Second Street,

/

Middle East/Africa: Rockwell Automati

Europe
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: [phone], Fax: [phone]

Publication 20Y-IN002B-EN-P – September 2011 PN-125569

Supersedes Publication 20Y-IN002A-EN-P – September 2008 Copyright © 2011 Rockwell Automation. All rights reserved. Printed in USA.

on,

Milwaukee, WI 53204-2496 USA,

Pegasus Park, De Kleetlaan 12a,

Tel:

(1) 414.382.2000, Fax: [phone]

1831 Diegem, Belgium,

Tel: [phone], Fax: [phone]