Rockwell Automation 150 SMC-50 User Manual
SMC-50 Safety Label Installation Instructions
1
WARNING
90°
2
To prevent electrical shock, disconnect from power source before
installing or servicing. Install in a suitable enclosure. Keep free from
contaminants.
1
2
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
cULus
FOR LINE CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 10,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
FOR INSIDE THE DELTA CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 18,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
IEC/EN 60947-4-2
FOR LINE CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 10,000 RMS SYMMETRICAL AMPERES, 690 VOLTS MAXIMUM.
FOR INSIDE THE DELTA CONNECTED MOTORS
SUITABLE FOR USE ON A CIRCUIT CAPABLE OF DELIVERING NOT MORE
THAN 18,000 RMS SYMMETRICAL AMPERES, 600 VOLTS MAXIMUM.
REFERENCE USER MANUAL 150-UM011* FOR ADDITIONAL INFORMATION
DANGER
Hazardous voltage in motor
circuit even when solid state
controller is OFF.
Disconnect main power
before servicing motor
controller or associated
wiring.
PN-102209
DIR 10000155855 (Version 00)
Printed in U.S.A.
3
4
90°
3
1
2
PN-102209
DIR 10000155855 (Version 00)
Printed in U.S.A.
Loading...