Rockwell Automation 1404-DM User Manual

Installation Instructions

Display Module Cable

Part Number W40863-850-01

to be used with Catalog Number 1404-DM

Wiring of Display Module

The Master Module powers the Display Module. See Figure 1 for wiring connections.

Use supplied Allen-Bradley Replacement Display Module cable Part # W40863-850-01 or equivalent category 5, shielded, with 4 twisted-pair, straight-through (not crossed).

Recommended maximum cable length: 3m (10 ft).

Figure 1 Wiring Display Module to Master Module

Powermonitor 3000

Part Number

W40863-850-01

1 Publication 1404-IN009A-EN-P - November 2004

Rockwell Automation Support

Rockwell Automation provides technical information on the web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.

For an additional level of technical phone support for installation, configuration and troubleshooting, we offer TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit http://support.rockwellautomation.com.

Installation Assistance

If you experience a problem with a hardware module within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your module up and running:

United States 1.440.646.3223 (for failures within the first 24 hours of installation)

1.440.646.5800 (for installation assistance) Monday – Friday, 8am – 5pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues.

New Product Satisfaction Return

Rockwell tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned:

United States Contact your distributor. You must provide a Customer Support case number (see phone number

above to obtain one) to your distributor in order to complete the return process.

Outside United States Please contact your local Rockwell Automation representative for return procedure.

Publication 1404-IN009A-EN-P - November 2004 2 PN 40055-225-01(1)